| /* | |
| * linux/drivers/gpio/pl061.c | |
| * | |
| * Copyright (C) 2008, 2009 Provigent Ltd. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * Driver for the ARM PrimeCell(tm) General Purpose Input/Output (PL061) | |
| * | |
| * Data sheet: ARM DDI 0190B, September 2000 | |
| */ | |
| #include <linux/spinlock.h> | |
| #include <linux/errno.h> | |
| #include <linux/module.h> | |
| #include <linux/list.h> | |
| #include <linux/io.h> | |
| #include <linux/ioport.h> | |
| #include <linux/irq.h> | |
| #include <linux/bitops.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/gpio.h> | |
| #include <linux/device.h> | |
| #include <linux/amba/bus.h> | |
| #include <linux/amba/pl061.h> | |
| #include <linux/slab.h> | |
| #define GPIODIR 0x400 | |
| #define GPIOIS 0x404 | |
| #define GPIOIBE 0x408 | |
| #define GPIOIEV 0x40C | |
| #define GPIOIE 0x410 | |
| #define GPIORIS 0x414 | |
| #define GPIOMIS 0x418 | |
| #define GPIOIC 0x41C | |
| #define PL061_GPIO_NR 8 | |
| struct pl061_gpio { | |
| /* We use a list of pl061_gpio structs for each trigger IRQ in the main | |
| * interrupts controller of the system. We need this to support systems | |
| * in which more that one PL061s are connected to the same IRQ. The ISR | |
| * interates through this list to find the source of the interrupt. | |
| */ | |
| struct list_head list; | |
| /* Each of the two spinlocks protects a different set of hardware | |
| * regiters and data structurs. This decouples the code of the IRQ from | |
| * the GPIO code. This also makes the case of a GPIO routine call from | |
| * the IRQ code simpler. | |
| */ | |
| spinlock_t lock; /* GPIO registers */ | |
| spinlock_t irq_lock; /* IRQ registers */ | |
| void __iomem *base; | |
| unsigned irq_base; | |
| struct gpio_chip gc; | |
| }; | |
| static int pl061_direction_input(struct gpio_chip *gc, unsigned offset) | |
| { | |
| struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc); | |
| unsigned long flags; | |
| unsigned char gpiodir; | |
| if (offset >= gc->ngpio) | |
| return -EINVAL; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| gpiodir = readb(chip->base + GPIODIR); | |
| gpiodir &= ~(1 << offset); | |
| writeb(gpiodir, chip->base + GPIODIR); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| return 0; | |
| } | |
| static int pl061_direction_output(struct gpio_chip *gc, unsigned offset, | |
| int value) | |
| { | |
| struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc); | |
| unsigned long flags; | |
| unsigned char gpiodir; | |
| if (offset >= gc->ngpio) | |
| return -EINVAL; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| writeb(!!value << offset, chip->base + (1 << (offset + 2))); | |
| gpiodir = readb(chip->base + GPIODIR); | |
| gpiodir |= 1 << offset; | |
| writeb(gpiodir, chip->base + GPIODIR); | |
| /* | |
| * gpio value is set again, because pl061 doesn't allow to set value of | |
| * a gpio pin before configuring it in OUT mode. | |
| */ | |
| writeb(!!value << offset, chip->base + (1 << (offset + 2))); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| return 0; | |
| } | |
| static int pl061_get_value(struct gpio_chip *gc, unsigned offset) | |
| { | |
| struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc); | |
| return !!readb(chip->base + (1 << (offset + 2))); | |
| } | |
| static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value) | |
| { | |
| struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc); | |
| writeb(!!value << offset, chip->base + (1 << (offset + 2))); | |
| } | |
| static int pl061_to_irq(struct gpio_chip *gc, unsigned offset) | |
| { | |
| struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc); | |
| if (chip->irq_base == (unsigned) -1) | |
| return -EINVAL; | |
| return chip->irq_base + offset; | |
| } | |
| /* | |
| * PL061 GPIO IRQ | |
| */ | |
| static void pl061_irq_disable(struct irq_data *d) | |
| { | |
| struct pl061_gpio *chip = irq_data_get_irq_chip_data(d); | |
| int offset = d->irq - chip->irq_base; | |
| unsigned long flags; | |
| u8 gpioie; | |
| spin_lock_irqsave(&chip->irq_lock, flags); | |
| gpioie = readb(chip->base + GPIOIE); | |
| gpioie &= ~(1 << offset); | |
| writeb(gpioie, chip->base + GPIOIE); | |
| spin_unlock_irqrestore(&chip->irq_lock, flags); | |
| } | |
| static void pl061_irq_enable(struct irq_data *d) | |
| { | |
| struct pl061_gpio *chip = irq_data_get_irq_chip_data(d); | |
| int offset = d->irq - chip->irq_base; | |
| unsigned long flags; | |
| u8 gpioie; | |
| spin_lock_irqsave(&chip->irq_lock, flags); | |
| gpioie = readb(chip->base + GPIOIE); | |
| gpioie |= 1 << offset; | |
| writeb(gpioie, chip->base + GPIOIE); | |
| spin_unlock_irqrestore(&chip->irq_lock, flags); | |
| } | |
| static int pl061_irq_type(struct irq_data *d, unsigned trigger) | |
| { | |
| struct pl061_gpio *chip = irq_data_get_irq_chip_data(d); | |
| int offset = d->irq - chip->irq_base; | |
| unsigned long flags; | |
| u8 gpiois, gpioibe, gpioiev; | |
| if (offset < 0 || offset >= PL061_GPIO_NR) | |
| return -EINVAL; | |
| spin_lock_irqsave(&chip->irq_lock, flags); | |
| gpioiev = readb(chip->base + GPIOIEV); | |
| gpiois = readb(chip->base + GPIOIS); | |
| if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { | |
| gpiois |= 1 << offset; | |
| if (trigger & IRQ_TYPE_LEVEL_HIGH) | |
| gpioiev |= 1 << offset; | |
| else | |
| gpioiev &= ~(1 << offset); | |
| } else | |
| gpiois &= ~(1 << offset); | |
| writeb(gpiois, chip->base + GPIOIS); | |
| gpioibe = readb(chip->base + GPIOIBE); | |
| if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) | |
| gpioibe |= 1 << offset; | |
| else { | |
| gpioibe &= ~(1 << offset); | |
| if (trigger & IRQ_TYPE_EDGE_RISING) | |
| gpioiev |= 1 << offset; | |
| else if (trigger & IRQ_TYPE_EDGE_FALLING) | |
| gpioiev &= ~(1 << offset); | |
| } | |
| writeb(gpioibe, chip->base + GPIOIBE); | |
| writeb(gpioiev, chip->base + GPIOIEV); | |
| spin_unlock_irqrestore(&chip->irq_lock, flags); | |
| return 0; | |
| } | |
| static struct irq_chip pl061_irqchip = { | |
| .name = "GPIO", | |
| .irq_enable = pl061_irq_enable, | |
| .irq_disable = pl061_irq_disable, | |
| .irq_set_type = pl061_irq_type, | |
| }; | |
| static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) | |
| { | |
| struct list_head *chip_list = irq_get_handler_data(irq); | |
| struct list_head *ptr; | |
| struct pl061_gpio *chip; | |
| desc->irq_data.chip->irq_ack(&desc->irq_data); | |
| list_for_each(ptr, chip_list) { | |
| unsigned long pending; | |
| int offset; | |
| chip = list_entry(ptr, struct pl061_gpio, list); | |
| pending = readb(chip->base + GPIOMIS); | |
| writeb(pending, chip->base + GPIOIC); | |
| if (pending == 0) | |
| continue; | |
| for_each_set_bit(offset, &pending, PL061_GPIO_NR) | |
| generic_handle_irq(pl061_to_irq(&chip->gc, offset)); | |
| } | |
| desc->irq_data.chip->irq_unmask(&desc->irq_data); | |
| } | |
| static int pl061_probe(struct amba_device *dev, const struct amba_id *id) | |
| { | |
| struct pl061_platform_data *pdata; | |
| struct pl061_gpio *chip; | |
| struct list_head *chip_list; | |
| int ret, irq, i; | |
| static DECLARE_BITMAP(init_irq, NR_IRQS); | |
| pdata = dev->dev.platform_data; | |
| if (pdata == NULL) | |
| return -ENODEV; | |
| chip = kzalloc(sizeof(*chip), GFP_KERNEL); | |
| if (chip == NULL) | |
| return -ENOMEM; | |
| if (!request_mem_region(dev->res.start, | |
| resource_size(&dev->res), "pl061")) { | |
| ret = -EBUSY; | |
| goto free_mem; | |
| } | |
| chip->base = ioremap(dev->res.start, resource_size(&dev->res)); | |
| if (chip->base == NULL) { | |
| ret = -ENOMEM; | |
| goto release_region; | |
| } | |
| spin_lock_init(&chip->lock); | |
| spin_lock_init(&chip->irq_lock); | |
| INIT_LIST_HEAD(&chip->list); | |
| chip->gc.direction_input = pl061_direction_input; | |
| chip->gc.direction_output = pl061_direction_output; | |
| chip->gc.get = pl061_get_value; | |
| chip->gc.set = pl061_set_value; | |
| chip->gc.to_irq = pl061_to_irq; | |
| chip->gc.base = pdata->gpio_base; | |
| chip->gc.ngpio = PL061_GPIO_NR; | |
| chip->gc.label = dev_name(&dev->dev); | |
| chip->gc.dev = &dev->dev; | |
| chip->gc.owner = THIS_MODULE; | |
| chip->irq_base = pdata->irq_base; | |
| ret = gpiochip_add(&chip->gc); | |
| if (ret) | |
| goto iounmap; | |
| /* | |
| * irq_chip support | |
| */ | |
| if (chip->irq_base == (unsigned) -1) | |
| return 0; | |
| writeb(0, chip->base + GPIOIE); /* disable irqs */ | |
| irq = dev->irq[0]; | |
| if (irq < 0) { | |
| ret = -ENODEV; | |
| goto iounmap; | |
| } | |
| irq_set_chained_handler(irq, pl061_irq_handler); | |
| if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */ | |
| chip_list = kmalloc(sizeof(*chip_list), GFP_KERNEL); | |
| if (chip_list == NULL) { | |
| clear_bit(irq, init_irq); | |
| ret = -ENOMEM; | |
| goto iounmap; | |
| } | |
| INIT_LIST_HEAD(chip_list); | |
| irq_set_handler_data(irq, chip_list); | |
| } else | |
| chip_list = irq_get_handler_data(irq); | |
| list_add(&chip->list, chip_list); | |
| for (i = 0; i < PL061_GPIO_NR; i++) { | |
| if (pdata->directions & (1 << i)) | |
| pl061_direction_output(&chip->gc, i, | |
| pdata->values & (1 << i)); | |
| else | |
| pl061_direction_input(&chip->gc, i); | |
| irq_set_chip_and_handler(i + chip->irq_base, &pl061_irqchip, | |
| handle_simple_irq); | |
| set_irq_flags(i+chip->irq_base, IRQF_VALID); | |
| irq_set_chip_data(i + chip->irq_base, chip); | |
| } | |
| return 0; | |
| iounmap: | |
| iounmap(chip->base); | |
| release_region: | |
| release_mem_region(dev->res.start, resource_size(&dev->res)); | |
| free_mem: | |
| kfree(chip); | |
| return ret; | |
| } | |
| static struct amba_id pl061_ids[] = { | |
| { | |
| .id = 0x00041061, | |
| .mask = 0x000fffff, | |
| }, | |
| { 0, 0 }, | |
| }; | |
| static struct amba_driver pl061_gpio_driver = { | |
| .drv = { | |
| .name = "pl061_gpio", | |
| }, | |
| .id_table = pl061_ids, | |
| .probe = pl061_probe, | |
| }; | |
| static int __init pl061_gpio_init(void) | |
| { | |
| return amba_driver_register(&pl061_gpio_driver); | |
| } | |
| subsys_initcall(pl061_gpio_init); | |
| MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); | |
| MODULE_DESCRIPTION("PL061 GPIO driver"); | |
| MODULE_LICENSE("GPL"); |