| /* | |
| hwmon.c - part of lm_sensors, Linux kernel modules for hardware monitoring | |
| This file defines the sysfs class "hwmon", for use by sensors drivers. | |
| Copyright (C) 2005 Mark M. Hoffman <mhoffman@lightlink.com> | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; version 2 of the License. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/device.h> | |
| #include <linux/err.h> | |
| #include <linux/kdev_t.h> | |
| #include <linux/idr.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/gfp.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/pci.h> | |
| #define HWMON_ID_PREFIX "hwmon" | |
| #define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d" | |
| static struct class *hwmon_class; | |
| static DEFINE_IDR(hwmon_idr); | |
| static DEFINE_SPINLOCK(idr_lock); | |
| /** | |
| * hwmon_device_register - register w/ hwmon | |
| * @dev: the device to register | |
| * | |
| * hwmon_device_unregister() must be called when the device is no | |
| * longer needed. | |
| * | |
| * Returns the pointer to the new device. | |
| */ | |
| struct device *hwmon_device_register(struct device *dev) | |
| { | |
| struct device *hwdev; | |
| int id, err; | |
| again: | |
| if (unlikely(idr_pre_get(&hwmon_idr, GFP_KERNEL) == 0)) | |
| return ERR_PTR(-ENOMEM); | |
| spin_lock(&idr_lock); | |
| err = idr_get_new(&hwmon_idr, NULL, &id); | |
| spin_unlock(&idr_lock); | |
| if (unlikely(err == -EAGAIN)) | |
| goto again; | |
| else if (unlikely(err)) | |
| return ERR_PTR(err); | |
| id = id & MAX_ID_MASK; | |
| hwdev = device_create(hwmon_class, dev, MKDEV(0, 0), NULL, | |
| HWMON_ID_FORMAT, id); | |
| if (IS_ERR(hwdev)) { | |
| spin_lock(&idr_lock); | |
| idr_remove(&hwmon_idr, id); | |
| spin_unlock(&idr_lock); | |
| } | |
| return hwdev; | |
| } | |
| /** | |
| * hwmon_device_unregister - removes the previously registered class device | |
| * | |
| * @dev: the class device to destroy | |
| */ | |
| void hwmon_device_unregister(struct device *dev) | |
| { | |
| int id; | |
| if (likely(sscanf(dev_name(dev), HWMON_ID_FORMAT, &id) == 1)) { | |
| device_unregister(dev); | |
| spin_lock(&idr_lock); | |
| idr_remove(&hwmon_idr, id); | |
| spin_unlock(&idr_lock); | |
| } else | |
| dev_dbg(dev->parent, | |
| "hwmon_device_unregister() failed: bad class ID!\n"); | |
| } | |
| static void __init hwmon_pci_quirks(void) | |
| { | |
| #if defined CONFIG_X86 && defined CONFIG_PCI | |
| struct pci_dev *sb; | |
| u16 base; | |
| u8 enable; | |
| /* Open access to 0x295-0x296 on MSI MS-7031 */ | |
| sb = pci_get_device(PCI_VENDOR_ID_ATI, 0x436c, NULL); | |
| if (sb && | |
| (sb->subsystem_vendor == 0x1462 && /* MSI */ | |
| sb->subsystem_device == 0x0031)) { /* MS-7031 */ | |
| pci_read_config_byte(sb, 0x48, &enable); | |
| pci_read_config_word(sb, 0x64, &base); | |
| if (base == 0 && !(enable & BIT(2))) { | |
| dev_info(&sb->dev, | |
| "Opening wide generic port at 0x295\n"); | |
| pci_write_config_word(sb, 0x64, 0x295); | |
| pci_write_config_byte(sb, 0x48, enable | BIT(2)); | |
| } | |
| } | |
| #endif | |
| } | |
| static int __init hwmon_init(void) | |
| { | |
| hwmon_pci_quirks(); | |
| hwmon_class = class_create(THIS_MODULE, "hwmon"); | |
| if (IS_ERR(hwmon_class)) { | |
| pr_err("couldn't create sysfs class\n"); | |
| return PTR_ERR(hwmon_class); | |
| } | |
| return 0; | |
| } | |
| static void __exit hwmon_exit(void) | |
| { | |
| class_destroy(hwmon_class); | |
| } | |
| subsys_initcall(hwmon_init); | |
| module_exit(hwmon_exit); | |
| EXPORT_SYMBOL_GPL(hwmon_device_register); | |
| EXPORT_SYMBOL_GPL(hwmon_device_unregister); | |
| MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); | |
| MODULE_DESCRIPTION("hardware monitoring sysfs/class support"); | |
| MODULE_LICENSE("GPL"); | |