| /* | |
| * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com> | |
| * | |
| * The LM95241 is a sensor chip made by National Semiconductors. | |
| * It reports up to three temperatures (its own plus up to two external ones). | |
| * Complete datasheet can be obtained from National's website at: | |
| * http://www.national.com/ds.cgi/LM/LM95241.pdf | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/i2c.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| #include <linux/sysfs.h> | |
| #define DEVNAME "lm95241" | |
| static const unsigned short normal_i2c[] = { | |
| 0x19, 0x2a, 0x2b, I2C_CLIENT_END }; | |
| /* LM95241 registers */ | |
| #define LM95241_REG_R_MAN_ID 0xFE | |
| #define LM95241_REG_R_CHIP_ID 0xFF | |
| #define LM95241_REG_R_STATUS 0x02 | |
| #define LM95241_REG_RW_CONFIG 0x03 | |
| #define LM95241_REG_RW_REM_FILTER 0x06 | |
| #define LM95241_REG_RW_TRUTHERM 0x07 | |
| #define LM95241_REG_W_ONE_SHOT 0x0F | |
| #define LM95241_REG_R_LOCAL_TEMPH 0x10 | |
| #define LM95241_REG_R_REMOTE1_TEMPH 0x11 | |
| #define LM95241_REG_R_REMOTE2_TEMPH 0x12 | |
| #define LM95241_REG_R_LOCAL_TEMPL 0x20 | |
| #define LM95241_REG_R_REMOTE1_TEMPL 0x21 | |
| #define LM95241_REG_R_REMOTE2_TEMPL 0x22 | |
| #define LM95241_REG_RW_REMOTE_MODEL 0x30 | |
| /* LM95241 specific bitfields */ | |
| #define CFG_STOP 0x40 | |
| #define CFG_CR0076 0x00 | |
| #define CFG_CR0182 0x10 | |
| #define CFG_CR1000 0x20 | |
| #define CFG_CR2700 0x30 | |
| #define R1MS_SHIFT 0 | |
| #define R2MS_SHIFT 2 | |
| #define R1MS_MASK (0x01 << (R1MS_SHIFT)) | |
| #define R2MS_MASK (0x01 << (R2MS_SHIFT)) | |
| #define R1DF_SHIFT 1 | |
| #define R2DF_SHIFT 2 | |
| #define R1DF_MASK (0x01 << (R1DF_SHIFT)) | |
| #define R2DF_MASK (0x01 << (R2DF_SHIFT)) | |
| #define R1FE_MASK 0x01 | |
| #define R2FE_MASK 0x05 | |
| #define TT1_SHIFT 0 | |
| #define TT2_SHIFT 4 | |
| #define TT_OFF 0 | |
| #define TT_ON 1 | |
| #define TT_MASK 7 | |
| #define MANUFACTURER_ID 0x01 | |
| #define DEFAULT_REVISION 0xA4 | |
| static const u8 lm95241_reg_address[] = { | |
| LM95241_REG_R_LOCAL_TEMPH, | |
| LM95241_REG_R_LOCAL_TEMPL, | |
| LM95241_REG_R_REMOTE1_TEMPH, | |
| LM95241_REG_R_REMOTE1_TEMPL, | |
| LM95241_REG_R_REMOTE2_TEMPH, | |
| LM95241_REG_R_REMOTE2_TEMPL | |
| }; | |
| /* Client data (each client gets its own) */ | |
| struct lm95241_data { | |
| struct device *hwmon_dev; | |
| struct mutex update_lock; | |
| unsigned long last_updated, interval; /* in jiffies */ | |
| char valid; /* zero until following fields are valid */ | |
| /* registers values */ | |
| u8 temp[ARRAY_SIZE(lm95241_reg_address)]; | |
| u8 config, model, trutherm; | |
| }; | |
| /* Conversions */ | |
| static int temp_from_reg_signed(u8 val_h, u8 val_l) | |
| { | |
| s16 val_hl = (val_h << 8) | val_l; | |
| return val_hl * 1000 / 256; | |
| } | |
| static int temp_from_reg_unsigned(u8 val_h, u8 val_l) | |
| { | |
| u16 val_hl = (val_h << 8) | val_l; | |
| return val_hl * 1000 / 256; | |
| } | |
| static struct lm95241_data *lm95241_update_device(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct lm95241_data *data = i2c_get_clientdata(client); | |
| mutex_lock(&data->update_lock); | |
| if (time_after(jiffies, data->last_updated + data->interval) || | |
| !data->valid) { | |
| int i; | |
| dev_dbg(&client->dev, "Updating lm95241 data.\n"); | |
| for (i = 0; i < ARRAY_SIZE(lm95241_reg_address); i++) | |
| data->temp[i] | |
| = i2c_smbus_read_byte_data(client, | |
| lm95241_reg_address[i]); | |
| data->last_updated = jiffies; | |
| data->valid = 1; | |
| } | |
| mutex_unlock(&data->update_lock); | |
| return data; | |
| } | |
| /* Sysfs stuff */ | |
| static ssize_t show_input(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lm95241_data *data = lm95241_update_device(dev); | |
| int index = to_sensor_dev_attr(attr)->index; | |
| return snprintf(buf, PAGE_SIZE - 1, "%d\n", | |
| index == 0 || (data->config & (1 << (index / 2))) ? | |
| temp_from_reg_signed(data->temp[index], data->temp[index + 1]) : | |
| temp_from_reg_unsigned(data->temp[index], | |
| data->temp[index + 1])); | |
| } | |
| static ssize_t show_type(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct lm95241_data *data = i2c_get_clientdata(client); | |
| return snprintf(buf, PAGE_SIZE - 1, | |
| data->model & to_sensor_dev_attr(attr)->index ? "1\n" : "2\n"); | |
| } | |
| static ssize_t set_type(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct lm95241_data *data = i2c_get_clientdata(client); | |
| unsigned long val; | |
| int shift; | |
| u8 mask = to_sensor_dev_attr(attr)->index; | |
| if (strict_strtoul(buf, 10, &val) < 0) | |
| return -EINVAL; | |
| if (val != 1 && val != 2) | |
| return -EINVAL; | |
| shift = mask == R1MS_MASK ? TT1_SHIFT : TT2_SHIFT; | |
| mutex_lock(&data->update_lock); | |
| data->trutherm &= ~(TT_MASK << shift); | |
| if (val == 1) { | |
| data->model |= mask; | |
| data->trutherm |= (TT_ON << shift); | |
| } else { | |
| data->model &= ~mask; | |
| data->trutherm |= (TT_OFF << shift); | |
| } | |
| data->valid = 0; | |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, | |
| data->model); | |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, | |
| data->trutherm); | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static ssize_t show_min(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct lm95241_data *data = i2c_get_clientdata(client); | |
| return snprintf(buf, PAGE_SIZE - 1, | |
| data->config & to_sensor_dev_attr(attr)->index ? | |
| "-127000\n" : "0\n"); | |
| } | |
| static ssize_t set_min(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct lm95241_data *data = i2c_get_clientdata(client); | |
| long val; | |
| if (strict_strtol(buf, 10, &val) < 0) | |
| return -EINVAL; | |
| if (val < -128000) | |
| return -EINVAL; | |
| mutex_lock(&data->update_lock); | |
| if (val < 0) | |
| data->config |= to_sensor_dev_attr(attr)->index; | |
| else | |
| data->config &= ~to_sensor_dev_attr(attr)->index; | |
| data->valid = 0; | |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static ssize_t show_max(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct lm95241_data *data = i2c_get_clientdata(client); | |
| return snprintf(buf, PAGE_SIZE - 1, | |
| data->config & to_sensor_dev_attr(attr)->index ? | |
| "127000\n" : "255000\n"); | |
| } | |
| static ssize_t set_max(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct lm95241_data *data = i2c_get_clientdata(client); | |
| long val; | |
| if (strict_strtol(buf, 10, &val) < 0) | |
| return -EINVAL; | |
| if (val >= 256000) | |
| return -EINVAL; | |
| mutex_lock(&data->update_lock); | |
| if (val <= 127000) | |
| data->config |= to_sensor_dev_attr(attr)->index; | |
| else | |
| data->config &= ~to_sensor_dev_attr(attr)->index; | |
| data->valid = 0; | |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static ssize_t show_interval(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct lm95241_data *data = lm95241_update_device(dev); | |
| return snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval | |
| / HZ); | |
| } | |
| static ssize_t set_interval(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct lm95241_data *data = i2c_get_clientdata(client); | |
| unsigned long val; | |
| if (strict_strtoul(buf, 10, &val) < 0) | |
| return -EINVAL; | |
| data->interval = val * HZ / 1000; | |
| return count; | |
| } | |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); | |
| static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2); | |
| static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 4); | |
| static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type, | |
| R1MS_MASK); | |
| static SENSOR_DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type, set_type, | |
| R2MS_MASK); | |
| static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min, | |
| R1DF_MASK); | |
| static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min, | |
| R2DF_MASK); | |
| static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max, | |
| R1DF_MASK); | |
| static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max, | |
| R2DF_MASK); | |
| static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, | |
| set_interval); | |
| static struct attribute *lm95241_attributes[] = { | |
| &sensor_dev_attr_temp1_input.dev_attr.attr, | |
| &sensor_dev_attr_temp2_input.dev_attr.attr, | |
| &sensor_dev_attr_temp3_input.dev_attr.attr, | |
| &sensor_dev_attr_temp2_type.dev_attr.attr, | |
| &sensor_dev_attr_temp3_type.dev_attr.attr, | |
| &sensor_dev_attr_temp2_min.dev_attr.attr, | |
| &sensor_dev_attr_temp3_min.dev_attr.attr, | |
| &sensor_dev_attr_temp2_max.dev_attr.attr, | |
| &sensor_dev_attr_temp3_max.dev_attr.attr, | |
| &dev_attr_update_interval.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group lm95241_group = { | |
| .attrs = lm95241_attributes, | |
| }; | |
| /* Return 0 if detection is successful, -ENODEV otherwise */ | |
| static int lm95241_detect(struct i2c_client *new_client, | |
| struct i2c_board_info *info) | |
| { | |
| struct i2c_adapter *adapter = new_client->adapter; | |
| int address = new_client->addr; | |
| const char *name; | |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
| return -ENODEV; | |
| if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID) | |
| == MANUFACTURER_ID) | |
| && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID) | |
| == DEFAULT_REVISION)) { | |
| name = DEVNAME; | |
| } else { | |
| dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n", | |
| address); | |
| return -ENODEV; | |
| } | |
| /* Fill the i2c board info */ | |
| strlcpy(info->type, name, I2C_NAME_SIZE); | |
| return 0; | |
| } | |
| static void lm95241_init_client(struct i2c_client *client) | |
| { | |
| struct lm95241_data *data = i2c_get_clientdata(client); | |
| data->interval = HZ; /* 1 sec default */ | |
| data->valid = 0; | |
| data->config = CFG_CR0076; | |
| data->model = 0; | |
| data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT); | |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); | |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER, | |
| R1FE_MASK | R2FE_MASK); | |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, | |
| data->trutherm); | |
| i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, | |
| data->model); | |
| } | |
| static int lm95241_probe(struct i2c_client *new_client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct lm95241_data *data; | |
| int err; | |
| data = kzalloc(sizeof(struct lm95241_data), GFP_KERNEL); | |
| if (!data) { | |
| err = -ENOMEM; | |
| goto exit; | |
| } | |
| i2c_set_clientdata(new_client, data); | |
| mutex_init(&data->update_lock); | |
| /* Initialize the LM95241 chip */ | |
| lm95241_init_client(new_client); | |
| /* Register sysfs hooks */ | |
| err = sysfs_create_group(&new_client->dev.kobj, &lm95241_group); | |
| if (err) | |
| goto exit_free; | |
| data->hwmon_dev = hwmon_device_register(&new_client->dev); | |
| if (IS_ERR(data->hwmon_dev)) { | |
| err = PTR_ERR(data->hwmon_dev); | |
| goto exit_remove_files; | |
| } | |
| return 0; | |
| exit_remove_files: | |
| sysfs_remove_group(&new_client->dev.kobj, &lm95241_group); | |
| exit_free: | |
| kfree(data); | |
| exit: | |
| return err; | |
| } | |
| static int lm95241_remove(struct i2c_client *client) | |
| { | |
| struct lm95241_data *data = i2c_get_clientdata(client); | |
| hwmon_device_unregister(data->hwmon_dev); | |
| sysfs_remove_group(&client->dev.kobj, &lm95241_group); | |
| kfree(data); | |
| return 0; | |
| } | |
| /* Driver data (common to all clients) */ | |
| static const struct i2c_device_id lm95241_id[] = { | |
| { DEVNAME, 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, lm95241_id); | |
| static struct i2c_driver lm95241_driver = { | |
| .class = I2C_CLASS_HWMON, | |
| .driver = { | |
| .name = DEVNAME, | |
| }, | |
| .probe = lm95241_probe, | |
| .remove = lm95241_remove, | |
| .id_table = lm95241_id, | |
| .detect = lm95241_detect, | |
| .address_list = normal_i2c, | |
| }; | |
| static int __init sensors_lm95241_init(void) | |
| { | |
| return i2c_add_driver(&lm95241_driver); | |
| } | |
| static void __exit sensors_lm95241_exit(void) | |
| { | |
| i2c_del_driver(&lm95241_driver); | |
| } | |
| MODULE_AUTHOR("Davide Rizzo <elpa.rizzo@gmail.com>"); | |
| MODULE_DESCRIPTION("LM95241 sensor driver"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(sensors_lm95241_init); | |
| module_exit(sensors_lm95241_exit); |