| /* | |
| * Support for IDE interfaces on Celleb platform | |
| * | |
| * (C) Copyright 2006 TOSHIBA CORPORATION | |
| * | |
| * This code is based on drivers/ide/pci/siimage.c: | |
| * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> | |
| * Copyright (C) 2003 Red Hat | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. | |
| */ | |
| #include <linux/types.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/delay.h> | |
| #include <linux/ide.h> | |
| #include <linux/init.h> | |
| #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 | |
| #define SCC_PATA_NAME "scc IDE" | |
| #define TDVHSEL_MASTER 0x00000001 | |
| #define TDVHSEL_SLAVE 0x00000004 | |
| #define MODE_JCUSFEN 0x00000080 | |
| #define CCKCTRL_ATARESET 0x00040000 | |
| #define CCKCTRL_BUFCNT 0x00020000 | |
| #define CCKCTRL_CRST 0x00010000 | |
| #define CCKCTRL_OCLKEN 0x00000100 | |
| #define CCKCTRL_ATACLKOEN 0x00000002 | |
| #define CCKCTRL_LCLKEN 0x00000001 | |
| #define QCHCD_IOS_SS 0x00000001 | |
| #define QCHSD_STPDIAG 0x00020000 | |
| #define INTMASK_MSK 0xD1000012 | |
| #define INTSTS_SERROR 0x80000000 | |
| #define INTSTS_PRERR 0x40000000 | |
| #define INTSTS_RERR 0x10000000 | |
| #define INTSTS_ICERR 0x01000000 | |
| #define INTSTS_BMSINT 0x00000010 | |
| #define INTSTS_BMHE 0x00000008 | |
| #define INTSTS_IOIRQS 0x00000004 | |
| #define INTSTS_INTRQ 0x00000002 | |
| #define INTSTS_ACTEINT 0x00000001 | |
| #define ECMODE_VALUE 0x01 | |
| static struct scc_ports { | |
| unsigned long ctl, dma; | |
| struct ide_host *host; /* for removing port from system */ | |
| } scc_ports[MAX_HWIFS]; | |
| /* PIO transfer mode table */ | |
| /* JCHST */ | |
| static unsigned long JCHSTtbl[2][7] = { | |
| {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ | |
| {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ | |
| }; | |
| /* JCHHT */ | |
| static unsigned long JCHHTtbl[2][7] = { | |
| {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ | |
| {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ | |
| }; | |
| /* JCHCT */ | |
| static unsigned long JCHCTtbl[2][7] = { | |
| {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ | |
| {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ | |
| }; | |
| /* DMA transfer mode table */ | |
| /* JCHDCTM/JCHDCTS */ | |
| static unsigned long JCHDCTxtbl[2][7] = { | |
| {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ | |
| {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ | |
| }; | |
| /* JCSTWTM/JCSTWTS */ | |
| static unsigned long JCSTWTxtbl[2][7] = { | |
| {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ | |
| {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ | |
| }; | |
| /* JCTSS */ | |
| static unsigned long JCTSStbl[2][7] = { | |
| {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ | |
| {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ | |
| }; | |
| /* JCENVT */ | |
| static unsigned long JCENVTtbl[2][7] = { | |
| {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ | |
| {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ | |
| }; | |
| /* JCACTSELS/JCACTSELM */ | |
| static unsigned long JCACTSELtbl[2][7] = { | |
| {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ | |
| {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ | |
| }; | |
| static u8 scc_ide_inb(unsigned long port) | |
| { | |
| u32 data = in_be32((void*)port); | |
| return (u8)data; | |
| } | |
| static void scc_exec_command(ide_hwif_t *hwif, u8 cmd) | |
| { | |
| out_be32((void *)hwif->io_ports.command_addr, cmd); | |
| eieio(); | |
| in_be32((void *)(hwif->dma_base + 0x01c)); | |
| eieio(); | |
| } | |
| static u8 scc_read_status(ide_hwif_t *hwif) | |
| { | |
| return (u8)in_be32((void *)hwif->io_ports.status_addr); | |
| } | |
| static u8 scc_read_altstatus(ide_hwif_t *hwif) | |
| { | |
| return (u8)in_be32((void *)hwif->io_ports.ctl_addr); | |
| } | |
| static u8 scc_dma_sff_read_status(ide_hwif_t *hwif) | |
| { | |
| return (u8)in_be32((void *)(hwif->dma_base + 4)); | |
| } | |
| static void scc_write_devctl(ide_hwif_t *hwif, u8 ctl) | |
| { | |
| out_be32((void *)hwif->io_ports.ctl_addr, ctl); | |
| eieio(); | |
| in_be32((void *)(hwif->dma_base + 0x01c)); | |
| eieio(); | |
| } | |
| static void scc_ide_insw(unsigned long port, void *addr, u32 count) | |
| { | |
| u16 *ptr = (u16 *)addr; | |
| while (count--) { | |
| *ptr++ = le16_to_cpu(in_be32((void*)port)); | |
| } | |
| } | |
| static void scc_ide_insl(unsigned long port, void *addr, u32 count) | |
| { | |
| u16 *ptr = (u16 *)addr; | |
| while (count--) { | |
| *ptr++ = le16_to_cpu(in_be32((void*)port)); | |
| *ptr++ = le16_to_cpu(in_be32((void*)port)); | |
| } | |
| } | |
| static void scc_ide_outb(u8 addr, unsigned long port) | |
| { | |
| out_be32((void*)port, addr); | |
| } | |
| static void | |
| scc_ide_outsw(unsigned long port, void *addr, u32 count) | |
| { | |
| u16 *ptr = (u16 *)addr; | |
| while (count--) { | |
| out_be32((void*)port, cpu_to_le16(*ptr++)); | |
| } | |
| } | |
| static void | |
| scc_ide_outsl(unsigned long port, void *addr, u32 count) | |
| { | |
| u16 *ptr = (u16 *)addr; | |
| while (count--) { | |
| out_be32((void*)port, cpu_to_le16(*ptr++)); | |
| out_be32((void*)port, cpu_to_le16(*ptr++)); | |
| } | |
| } | |
| /** | |
| * scc_set_pio_mode - set host controller for PIO mode | |
| * @hwif: port | |
| * @drive: drive | |
| * | |
| * Load the timing settings for this device mode into the | |
| * controller. | |
| */ | |
| static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) | |
| { | |
| struct scc_ports *ports = ide_get_hwifdata(hwif); | |
| unsigned long ctl_base = ports->ctl; | |
| unsigned long cckctrl_port = ctl_base + 0xff0; | |
| unsigned long piosht_port = ctl_base + 0x000; | |
| unsigned long pioct_port = ctl_base + 0x004; | |
| unsigned long reg; | |
| int offset; | |
| const u8 pio = drive->pio_mode - XFER_PIO_0; | |
| reg = in_be32((void __iomem *)cckctrl_port); | |
| if (reg & CCKCTRL_ATACLKOEN) { | |
| offset = 1; /* 133MHz */ | |
| } else { | |
| offset = 0; /* 100MHz */ | |
| } | |
| reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; | |
| out_be32((void __iomem *)piosht_port, reg); | |
| reg = JCHCTtbl[offset][pio]; | |
| out_be32((void __iomem *)pioct_port, reg); | |
| } | |
| /** | |
| * scc_set_dma_mode - set host controller for DMA mode | |
| * @hwif: port | |
| * @drive: drive | |
| * | |
| * Load the timing settings for this device mode into the | |
| * controller. | |
| */ | |
| static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) | |
| { | |
| struct scc_ports *ports = ide_get_hwifdata(hwif); | |
| unsigned long ctl_base = ports->ctl; | |
| unsigned long cckctrl_port = ctl_base + 0xff0; | |
| unsigned long mdmact_port = ctl_base + 0x008; | |
| unsigned long mcrcst_port = ctl_base + 0x00c; | |
| unsigned long sdmact_port = ctl_base + 0x010; | |
| unsigned long scrcst_port = ctl_base + 0x014; | |
| unsigned long udenvt_port = ctl_base + 0x018; | |
| unsigned long tdvhsel_port = ctl_base + 0x020; | |
| int is_slave = drive->dn & 1; | |
| int offset, idx; | |
| unsigned long reg; | |
| unsigned long jcactsel; | |
| const u8 speed = drive->dma_mode; | |
| reg = in_be32((void __iomem *)cckctrl_port); | |
| if (reg & CCKCTRL_ATACLKOEN) { | |
| offset = 1; /* 133MHz */ | |
| } else { | |
| offset = 0; /* 100MHz */ | |
| } | |
| idx = speed - XFER_UDMA_0; | |
| jcactsel = JCACTSELtbl[offset][idx]; | |
| if (is_slave) { | |
| out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]); | |
| out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]); | |
| jcactsel = jcactsel << 2; | |
| out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel); | |
| } else { | |
| out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]); | |
| out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]); | |
| out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel); | |
| } | |
| reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]; | |
| out_be32((void __iomem *)udenvt_port, reg); | |
| } | |
| static void scc_dma_host_set(ide_drive_t *drive, int on) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| u8 unit = drive->dn & 1; | |
| u8 dma_stat = scc_dma_sff_read_status(hwif); | |
| if (on) | |
| dma_stat |= (1 << (5 + unit)); | |
| else | |
| dma_stat &= ~(1 << (5 + unit)); | |
| scc_ide_outb(dma_stat, hwif->dma_base + 4); | |
| } | |
| /** | |
| * scc_dma_setup - begin a DMA phase | |
| * @drive: target device | |
| * @cmd: command | |
| * | |
| * Build an IDE DMA PRD (IDE speak for scatter gather table) | |
| * and then set up the DMA transfer registers. | |
| * | |
| * Returns 0 on success. If a PIO fallback is required then 1 | |
| * is returned. | |
| */ | |
| static int scc_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| u32 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR; | |
| u8 dma_stat; | |
| /* fall back to pio! */ | |
| if (ide_build_dmatable(drive, cmd) == 0) | |
| return 1; | |
| /* PRD table */ | |
| out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma); | |
| /* specify r/w */ | |
| out_be32((void __iomem *)hwif->dma_base, rw); | |
| /* read DMA status for INTR & ERROR flags */ | |
| dma_stat = scc_dma_sff_read_status(hwif); | |
| /* clear INTR & ERROR flags */ | |
| out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6); | |
| return 0; | |
| } | |
| static void scc_dma_start(ide_drive_t *drive) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| u8 dma_cmd = scc_ide_inb(hwif->dma_base); | |
| /* start DMA */ | |
| scc_ide_outb(dma_cmd | 1, hwif->dma_base); | |
| } | |
| static int __scc_dma_end(ide_drive_t *drive) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| u8 dma_stat, dma_cmd; | |
| /* get DMA command mode */ | |
| dma_cmd = scc_ide_inb(hwif->dma_base); | |
| /* stop DMA */ | |
| scc_ide_outb(dma_cmd & ~1, hwif->dma_base); | |
| /* get DMA status */ | |
| dma_stat = scc_dma_sff_read_status(hwif); | |
| /* clear the INTR & ERROR bits */ | |
| scc_ide_outb(dma_stat | 6, hwif->dma_base + 4); | |
| /* verify good DMA status */ | |
| return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; | |
| } | |
| /** | |
| * scc_dma_end - Stop DMA | |
| * @drive: IDE drive | |
| * | |
| * Check and clear INT Status register. | |
| * Then call __scc_dma_end(). | |
| */ | |
| static int scc_dma_end(ide_drive_t *drive) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| void __iomem *dma_base = (void __iomem *)hwif->dma_base; | |
| unsigned long intsts_port = hwif->dma_base + 0x014; | |
| u32 reg; | |
| int dma_stat, data_loss = 0; | |
| static int retry = 0; | |
| /* errata A308 workaround: Step5 (check data loss) */ | |
| /* We don't check non ide_disk because it is limited to UDMA4 */ | |
| if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr) | |
| & ATA_ERR) && | |
| drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { | |
| reg = in_be32((void __iomem *)intsts_port); | |
| if (!(reg & INTSTS_ACTEINT)) { | |
| printk(KERN_WARNING "%s: operation failed (transfer data loss)\n", | |
| drive->name); | |
| data_loss = 1; | |
| if (retry++) { | |
| struct request *rq = hwif->rq; | |
| ide_drive_t *drive; | |
| int i; | |
| /* ERROR_RESET and drive->crc_count are needed | |
| * to reduce DMA transfer mode in retry process. | |
| */ | |
| if (rq) | |
| rq->errors |= ERROR_RESET; | |
| ide_port_for_each_dev(i, drive, hwif) | |
| drive->crc_count++; | |
| } | |
| } | |
| } | |
| while (1) { | |
| reg = in_be32((void __iomem *)intsts_port); | |
| if (reg & INTSTS_SERROR) { | |
| printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME); | |
| out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT); | |
| out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); | |
| continue; | |
| } | |
| if (reg & INTSTS_PRERR) { | |
| u32 maea0, maec0; | |
| unsigned long ctl_base = hwif->config_data; | |
| maea0 = in_be32((void __iomem *)(ctl_base + 0xF50)); | |
| maec0 = in_be32((void __iomem *)(ctl_base + 0xF54)); | |
| printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0); | |
| out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT); | |
| out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); | |
| continue; | |
| } | |
| if (reg & INTSTS_RERR) { | |
| printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME); | |
| out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT); | |
| out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); | |
| continue; | |
| } | |
| if (reg & INTSTS_ICERR) { | |
| out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); | |
| printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME); | |
| out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT); | |
| continue; | |
| } | |
| if (reg & INTSTS_BMSINT) { | |
| printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME); | |
| out_be32((void __iomem *)intsts_port, INTSTS_BMSINT); | |
| ide_do_reset(drive); | |
| continue; | |
| } | |
| if (reg & INTSTS_BMHE) { | |
| out_be32((void __iomem *)intsts_port, INTSTS_BMHE); | |
| continue; | |
| } | |
| if (reg & INTSTS_ACTEINT) { | |
| out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT); | |
| continue; | |
| } | |
| if (reg & INTSTS_IOIRQS) { | |
| out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS); | |
| continue; | |
| } | |
| break; | |
| } | |
| dma_stat = __scc_dma_end(drive); | |
| if (data_loss) | |
| dma_stat |= 2; /* emulate DMA error (to retry command) */ | |
| return dma_stat; | |
| } | |
| /* returns 1 if dma irq issued, 0 otherwise */ | |
| static int scc_dma_test_irq(ide_drive_t *drive) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014); | |
| /* SCC errata A252,A308 workaround: Step4 */ | |
| if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr) | |
| & ATA_ERR) && | |
| (int_stat & INTSTS_INTRQ)) | |
| return 1; | |
| /* SCC errata A308 workaround: Step5 (polling IOIRQS) */ | |
| if (int_stat & INTSTS_IOIRQS) | |
| return 1; | |
| return 0; | |
| } | |
| static u8 scc_udma_filter(ide_drive_t *drive) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| u8 mask = hwif->ultra_mask; | |
| /* errata A308 workaround: limit non ide_disk drive to UDMA4 */ | |
| if ((drive->media != ide_disk) && (mask & 0xE0)) { | |
| printk(KERN_INFO "%s: limit %s to UDMA4\n", | |
| SCC_PATA_NAME, drive->name); | |
| mask = ATA_UDMA4; | |
| } | |
| return mask; | |
| } | |
| /** | |
| * setup_mmio_scc - map CTRL/BMID region | |
| * @dev: PCI device we are configuring | |
| * @name: device name | |
| * | |
| */ | |
| static int setup_mmio_scc (struct pci_dev *dev, const char *name) | |
| { | |
| void __iomem *ctl_addr; | |
| void __iomem *dma_addr; | |
| int i, ret; | |
| for (i = 0; i < MAX_HWIFS; i++) { | |
| if (scc_ports[i].ctl == 0) | |
| break; | |
| } | |
| if (i >= MAX_HWIFS) | |
| return -ENOMEM; | |
| ret = pci_request_selected_regions(dev, (1 << 2) - 1, name); | |
| if (ret < 0) { | |
| printk(KERN_ERR "%s: can't reserve resources\n", name); | |
| return ret; | |
| } | |
| ctl_addr = pci_ioremap_bar(dev, 0); | |
| if (!ctl_addr) | |
| goto fail_0; | |
| dma_addr = pci_ioremap_bar(dev, 1); | |
| if (!dma_addr) | |
| goto fail_1; | |
| pci_set_master(dev); | |
| scc_ports[i].ctl = (unsigned long)ctl_addr; | |
| scc_ports[i].dma = (unsigned long)dma_addr; | |
| pci_set_drvdata(dev, (void *) &scc_ports[i]); | |
| return 1; | |
| fail_1: | |
| iounmap(ctl_addr); | |
| fail_0: | |
| return -ENOMEM; | |
| } | |
| static int scc_ide_setup_pci_device(struct pci_dev *dev, | |
| const struct ide_port_info *d) | |
| { | |
| struct scc_ports *ports = pci_get_drvdata(dev); | |
| struct ide_host *host; | |
| struct ide_hw hw, *hws[] = { &hw }; | |
| int i, rc; | |
| memset(&hw, 0, sizeof(hw)); | |
| for (i = 0; i <= 8; i++) | |
| hw.io_ports_array[i] = ports->dma + 0x20 + i * 4; | |
| hw.irq = dev->irq; | |
| hw.dev = &dev->dev; | |
| rc = ide_host_add(d, hws, 1, &host); | |
| if (rc) | |
| return rc; | |
| ports->host = host; | |
| return 0; | |
| } | |
| /** | |
| * init_setup_scc - set up an SCC PATA Controller | |
| * @dev: PCI device | |
| * @d: IDE port info | |
| * | |
| * Perform the initial set up for this device. | |
| */ | |
| static int __devinit init_setup_scc(struct pci_dev *dev, | |
| const struct ide_port_info *d) | |
| { | |
| unsigned long ctl_base; | |
| unsigned long dma_base; | |
| unsigned long cckctrl_port; | |
| unsigned long intmask_port; | |
| unsigned long mode_port; | |
| unsigned long ecmode_port; | |
| u32 reg = 0; | |
| struct scc_ports *ports; | |
| int rc; | |
| rc = pci_enable_device(dev); | |
| if (rc) | |
| goto end; | |
| rc = setup_mmio_scc(dev, d->name); | |
| if (rc < 0) | |
| goto end; | |
| ports = pci_get_drvdata(dev); | |
| ctl_base = ports->ctl; | |
| dma_base = ports->dma; | |
| cckctrl_port = ctl_base + 0xff0; | |
| intmask_port = dma_base + 0x010; | |
| mode_port = ctl_base + 0x024; | |
| ecmode_port = ctl_base + 0xf00; | |
| /* controller initialization */ | |
| reg = 0; | |
| out_be32((void*)cckctrl_port, reg); | |
| reg |= CCKCTRL_ATACLKOEN; | |
| out_be32((void*)cckctrl_port, reg); | |
| reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; | |
| out_be32((void*)cckctrl_port, reg); | |
| reg |= CCKCTRL_CRST; | |
| out_be32((void*)cckctrl_port, reg); | |
| for (;;) { | |
| reg = in_be32((void*)cckctrl_port); | |
| if (reg & CCKCTRL_CRST) | |
| break; | |
| udelay(5000); | |
| } | |
| reg |= CCKCTRL_ATARESET; | |
| out_be32((void*)cckctrl_port, reg); | |
| out_be32((void*)ecmode_port, ECMODE_VALUE); | |
| out_be32((void*)mode_port, MODE_JCUSFEN); | |
| out_be32((void*)intmask_port, INTMASK_MSK); | |
| rc = scc_ide_setup_pci_device(dev, d); | |
| end: | |
| return rc; | |
| } | |
| static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) | |
| { | |
| struct ide_io_ports *io_ports = &drive->hwif->io_ports; | |
| if (valid & IDE_VALID_FEATURE) | |
| scc_ide_outb(tf->feature, io_ports->feature_addr); | |
| if (valid & IDE_VALID_NSECT) | |
| scc_ide_outb(tf->nsect, io_ports->nsect_addr); | |
| if (valid & IDE_VALID_LBAL) | |
| scc_ide_outb(tf->lbal, io_ports->lbal_addr); | |
| if (valid & IDE_VALID_LBAM) | |
| scc_ide_outb(tf->lbam, io_ports->lbam_addr); | |
| if (valid & IDE_VALID_LBAH) | |
| scc_ide_outb(tf->lbah, io_ports->lbah_addr); | |
| if (valid & IDE_VALID_DEVICE) | |
| scc_ide_outb(tf->device, io_ports->device_addr); | |
| } | |
| static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) | |
| { | |
| struct ide_io_ports *io_ports = &drive->hwif->io_ports; | |
| if (valid & IDE_VALID_ERROR) | |
| tf->error = scc_ide_inb(io_ports->feature_addr); | |
| if (valid & IDE_VALID_NSECT) | |
| tf->nsect = scc_ide_inb(io_ports->nsect_addr); | |
| if (valid & IDE_VALID_LBAL) | |
| tf->lbal = scc_ide_inb(io_ports->lbal_addr); | |
| if (valid & IDE_VALID_LBAM) | |
| tf->lbam = scc_ide_inb(io_ports->lbam_addr); | |
| if (valid & IDE_VALID_LBAH) | |
| tf->lbah = scc_ide_inb(io_ports->lbah_addr); | |
| if (valid & IDE_VALID_DEVICE) | |
| tf->device = scc_ide_inb(io_ports->device_addr); | |
| } | |
| static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd, | |
| void *buf, unsigned int len) | |
| { | |
| unsigned long data_addr = drive->hwif->io_ports.data_addr; | |
| len++; | |
| if (drive->io_32bit) { | |
| scc_ide_insl(data_addr, buf, len / 4); | |
| if ((len & 3) >= 2) | |
| scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1); | |
| } else | |
| scc_ide_insw(data_addr, buf, len / 2); | |
| } | |
| static void scc_output_data(ide_drive_t *drive, struct ide_cmd *cmd, | |
| void *buf, unsigned int len) | |
| { | |
| unsigned long data_addr = drive->hwif->io_ports.data_addr; | |
| len++; | |
| if (drive->io_32bit) { | |
| scc_ide_outsl(data_addr, buf, len / 4); | |
| if ((len & 3) >= 2) | |
| scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1); | |
| } else | |
| scc_ide_outsw(data_addr, buf, len / 2); | |
| } | |
| /** | |
| * init_mmio_iops_scc - set up the iops for MMIO | |
| * @hwif: interface to set up | |
| * | |
| */ | |
| static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) | |
| { | |
| struct pci_dev *dev = to_pci_dev(hwif->dev); | |
| struct scc_ports *ports = pci_get_drvdata(dev); | |
| unsigned long dma_base = ports->dma; | |
| ide_set_hwifdata(hwif, ports); | |
| hwif->dma_base = dma_base; | |
| hwif->config_data = ports->ctl; | |
| } | |
| /** | |
| * init_iops_scc - set up iops | |
| * @hwif: interface to set up | |
| * | |
| * Do the basic setup for the SCC hardware interface | |
| * and then do the MMIO setup. | |
| */ | |
| static void __devinit init_iops_scc(ide_hwif_t *hwif) | |
| { | |
| struct pci_dev *dev = to_pci_dev(hwif->dev); | |
| hwif->hwif_data = NULL; | |
| if (pci_get_drvdata(dev) == NULL) | |
| return; | |
| init_mmio_iops_scc(hwif); | |
| } | |
| static int __devinit scc_init_dma(ide_hwif_t *hwif, | |
| const struct ide_port_info *d) | |
| { | |
| return ide_allocate_dma_engine(hwif); | |
| } | |
| static u8 scc_cable_detect(ide_hwif_t *hwif) | |
| { | |
| return ATA_CBL_PATA80; | |
| } | |
| /** | |
| * init_hwif_scc - set up hwif | |
| * @hwif: interface to set up | |
| * | |
| * We do the basic set up of the interface structure. The SCC | |
| * requires several custom handlers so we override the default | |
| * ide DMA handlers appropriately. | |
| */ | |
| static void __devinit init_hwif_scc(ide_hwif_t *hwif) | |
| { | |
| /* PTERADD */ | |
| out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); | |
| if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) | |
| hwif->ultra_mask = ATA_UDMA6; /* 133MHz */ | |
| else | |
| hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ | |
| } | |
| static const struct ide_tp_ops scc_tp_ops = { | |
| .exec_command = scc_exec_command, | |
| .read_status = scc_read_status, | |
| .read_altstatus = scc_read_altstatus, | |
| .write_devctl = scc_write_devctl, | |
| .dev_select = ide_dev_select, | |
| .tf_load = scc_tf_load, | |
| .tf_read = scc_tf_read, | |
| .input_data = scc_input_data, | |
| .output_data = scc_output_data, | |
| }; | |
| static const struct ide_port_ops scc_port_ops = { | |
| .set_pio_mode = scc_set_pio_mode, | |
| .set_dma_mode = scc_set_dma_mode, | |
| .udma_filter = scc_udma_filter, | |
| .cable_detect = scc_cable_detect, | |
| }; | |
| static const struct ide_dma_ops scc_dma_ops = { | |
| .dma_host_set = scc_dma_host_set, | |
| .dma_setup = scc_dma_setup, | |
| .dma_start = scc_dma_start, | |
| .dma_end = scc_dma_end, | |
| .dma_test_irq = scc_dma_test_irq, | |
| .dma_lost_irq = ide_dma_lost_irq, | |
| .dma_timer_expiry = ide_dma_sff_timer_expiry, | |
| .dma_sff_read_status = scc_dma_sff_read_status, | |
| }; | |
| static const struct ide_port_info scc_chipset __devinitdata = { | |
| .name = "sccIDE", | |
| .init_iops = init_iops_scc, | |
| .init_dma = scc_init_dma, | |
| .init_hwif = init_hwif_scc, | |
| .tp_ops = &scc_tp_ops, | |
| .port_ops = &scc_port_ops, | |
| .dma_ops = &scc_dma_ops, | |
| .host_flags = IDE_HFLAG_SINGLE, | |
| .irq_flags = IRQF_SHARED, | |
| .pio_mask = ATA_PIO4, | |
| .chipset = ide_pci, | |
| }; | |
| /** | |
| * scc_init_one - pci layer discovery entry | |
| * @dev: PCI device | |
| * @id: ident table entry | |
| * | |
| * Called by the PCI code when it finds an SCC PATA controller. | |
| * We then use the IDE PCI generic helper to do most of the work. | |
| */ | |
| static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |
| { | |
| return init_setup_scc(dev, &scc_chipset); | |
| } | |
| /** | |
| * scc_remove - pci layer remove entry | |
| * @dev: PCI device | |
| * | |
| * Called by the PCI code when it removes an SCC PATA controller. | |
| */ | |
| static void __devexit scc_remove(struct pci_dev *dev) | |
| { | |
| struct scc_ports *ports = pci_get_drvdata(dev); | |
| struct ide_host *host = ports->host; | |
| ide_host_remove(host); | |
| iounmap((void*)ports->dma); | |
| iounmap((void*)ports->ctl); | |
| pci_release_selected_regions(dev, (1 << 2) - 1); | |
| memset(ports, 0, sizeof(*ports)); | |
| } | |
| static const struct pci_device_id scc_pci_tbl[] = { | |
| { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 }, | |
| { 0, }, | |
| }; | |
| MODULE_DEVICE_TABLE(pci, scc_pci_tbl); | |
| static struct pci_driver scc_pci_driver = { | |
| .name = "SCC IDE", | |
| .id_table = scc_pci_tbl, | |
| .probe = scc_init_one, | |
| .remove = __devexit_p(scc_remove), | |
| }; | |
| static int __init scc_ide_init(void) | |
| { | |
| return ide_pci_register_driver(&scc_pci_driver); | |
| } | |
| static void __exit scc_ide_exit(void) | |
| { | |
| pci_unregister_driver(&scc_pci_driver); | |
| } | |
| module_init(scc_ide_init); | |
| module_exit(scc_ide_exit); | |
| MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); | |
| MODULE_LICENSE("GPL"); |