| /* | |
| * AD714X CapTouch Programmable Controller driver (SPI bus) | |
| * | |
| * Copyright 2009 Analog Devices Inc. | |
| * | |
| * Licensed under the GPL-2 or later. | |
| */ | |
| #include <linux/input.h> /* BUS_I2C */ | |
| #include <linux/module.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/pm.h> | |
| #include <linux/types.h> | |
| #include "ad714x.h" | |
| #define AD714x_SPI_CMD_PREFIX 0xE000 /* bits 15:11 */ | |
| #define AD714x_SPI_READ BIT(10) | |
| #ifdef CONFIG_PM | |
| static int ad714x_spi_suspend(struct device *dev) | |
| { | |
| return ad714x_disable(spi_get_drvdata(to_spi_device(dev))); | |
| } | |
| static int ad714x_spi_resume(struct device *dev) | |
| { | |
| return ad714x_enable(spi_get_drvdata(to_spi_device(dev))); | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume); | |
| static int ad714x_spi_read(struct device *dev, unsigned short reg, | |
| unsigned short *data) | |
| { | |
| struct spi_device *spi = to_spi_device(dev); | |
| unsigned short tx = AD714x_SPI_CMD_PREFIX | AD714x_SPI_READ | reg; | |
| return spi_write_then_read(spi, (u8 *)&tx, 2, (u8 *)data, 2); | |
| } | |
| static int ad714x_spi_write(struct device *dev, unsigned short reg, | |
| unsigned short data) | |
| { | |
| struct spi_device *spi = to_spi_device(dev); | |
| unsigned short tx[2] = { | |
| AD714x_SPI_CMD_PREFIX | reg, | |
| data | |
| }; | |
| return spi_write(spi, (u8 *)tx, 4); | |
| } | |
| static int __devinit ad714x_spi_probe(struct spi_device *spi) | |
| { | |
| struct ad714x_chip *chip; | |
| chip = ad714x_probe(&spi->dev, BUS_SPI, spi->irq, | |
| ad714x_spi_read, ad714x_spi_write); | |
| if (IS_ERR(chip)) | |
| return PTR_ERR(chip); | |
| spi_set_drvdata(spi, chip); | |
| return 0; | |
| } | |
| static int __devexit ad714x_spi_remove(struct spi_device *spi) | |
| { | |
| struct ad714x_chip *chip = spi_get_drvdata(spi); | |
| ad714x_remove(chip); | |
| spi_set_drvdata(spi, NULL); | |
| return 0; | |
| } | |
| static struct spi_driver ad714x_spi_driver = { | |
| .driver = { | |
| .name = "ad714x_captouch", | |
| .owner = THIS_MODULE, | |
| .pm = &ad714x_spi_pm, | |
| }, | |
| .probe = ad714x_spi_probe, | |
| .remove = __devexit_p(ad714x_spi_remove), | |
| }; | |
| static __init int ad714x_spi_init(void) | |
| { | |
| return spi_register_driver(&ad714x_spi_driver); | |
| } | |
| module_init(ad714x_spi_init); | |
| static __exit void ad714x_spi_exit(void) | |
| { | |
| spi_unregister_driver(&ad714x_spi_driver); | |
| } | |
| module_exit(ad714x_spi_exit); | |
| MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor SPI Bus Driver"); | |
| MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); | |
| MODULE_LICENSE("GPL"); |