| /* | |
| * Elantech Touchpad driver (v6) | |
| * | |
| * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License version 2 as published | |
| * by the Free Software Foundation. | |
| * | |
| * Trademarks are the property of their respective owners. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_BASENAME ": " fmt | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/input.h> | |
| #include <linux/input/mt.h> | |
| #include <linux/serio.h> | |
| #include <linux/libps2.h> | |
| #include "psmouse.h" | |
| #include "elantech.h" | |
| #define elantech_debug(fmt, ...) \ | |
| do { \ | |
| if (etd->debug) \ | |
| printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \ | |
| } while (0) | |
| static bool force_elantech; | |
| module_param_named(force_elantech, force_elantech, bool, 0644); | |
| MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default)."); | |
| /* | |
| * Send a Synaptics style sliced query command | |
| */ | |
| static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, | |
| unsigned char *param) | |
| { | |
| if (psmouse_sliced_command(psmouse, c) || | |
| ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { | |
| pr_err("synaptics_send_cmd query 0x%02x failed.\n", c); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * A retrying version of ps2_command | |
| */ | |
| static int elantech_ps2_command(struct psmouse *psmouse, | |
| unsigned char *param, int command) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| struct elantech_data *etd = psmouse->private; | |
| int rc; | |
| int tries = ETP_PS2_COMMAND_TRIES; | |
| do { | |
| rc = ps2_command(ps2dev, param, command); | |
| if (rc == 0) | |
| break; | |
| tries--; | |
| elantech_debug("retrying ps2 command 0x%02x (%d).\n", | |
| command, tries); | |
| msleep(ETP_PS2_COMMAND_DELAY); | |
| } while (tries > 0); | |
| if (rc) | |
| pr_err("ps2 command 0x%02x failed.\n", command); | |
| return rc; | |
| } | |
| /* | |
| * Send an Elantech style special command to read a value from a register | |
| */ | |
| static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg, | |
| unsigned char *val) | |
| { | |
| struct elantech_data *etd = psmouse->private; | |
| unsigned char param[3]; | |
| int rc = 0; | |
| if (reg < 0x10 || reg > 0x26) | |
| return -1; | |
| if (reg > 0x11 && reg < 0x20) | |
| return -1; | |
| switch (etd->hw_version) { | |
| case 1: | |
| if (psmouse_sliced_command(psmouse, ETP_REGISTER_READ) || | |
| psmouse_sliced_command(psmouse, reg) || | |
| ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { | |
| rc = -1; | |
| } | |
| break; | |
| case 2: | |
| if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || | |
| elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READ) || | |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || | |
| elantech_ps2_command(psmouse, NULL, reg) || | |
| elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) { | |
| rc = -1; | |
| } | |
| break; | |
| } | |
| if (rc) | |
| pr_err("failed to read register 0x%02x.\n", reg); | |
| else | |
| *val = param[0]; | |
| return rc; | |
| } | |
| /* | |
| * Send an Elantech style special command to write a register with a value | |
| */ | |
| static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, | |
| unsigned char val) | |
| { | |
| struct elantech_data *etd = psmouse->private; | |
| int rc = 0; | |
| if (reg < 0x10 || reg > 0x26) | |
| return -1; | |
| if (reg > 0x11 && reg < 0x20) | |
| return -1; | |
| switch (etd->hw_version) { | |
| case 1: | |
| if (psmouse_sliced_command(psmouse, ETP_REGISTER_WRITE) || | |
| psmouse_sliced_command(psmouse, reg) || | |
| psmouse_sliced_command(psmouse, val) || | |
| ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) { | |
| rc = -1; | |
| } | |
| break; | |
| case 2: | |
| if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || | |
| elantech_ps2_command(psmouse, NULL, ETP_REGISTER_WRITE) || | |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || | |
| elantech_ps2_command(psmouse, NULL, reg) || | |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || | |
| elantech_ps2_command(psmouse, NULL, val) || | |
| elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { | |
| rc = -1; | |
| } | |
| break; | |
| } | |
| if (rc) | |
| pr_err("failed to write register 0x%02x with value 0x%02x.\n", | |
| reg, val); | |
| return rc; | |
| } | |
| /* | |
| * Dump a complete mouse movement packet to the syslog | |
| */ | |
| static void elantech_packet_dump(unsigned char *packet, int size) | |
| { | |
| int i; | |
| printk(KERN_DEBUG pr_fmt("PS/2 packet [")); | |
| for (i = 0; i < size; i++) | |
| printk("%s0x%02x ", (i) ? ", " : " ", packet[i]); | |
| printk("]\n"); | |
| } | |
| /* | |
| * Interpret complete data packets and report absolute mode input events for | |
| * hardware version 1. (4 byte packets) | |
| */ | |
| static void elantech_report_absolute_v1(struct psmouse *psmouse) | |
| { | |
| struct input_dev *dev = psmouse->dev; | |
| struct elantech_data *etd = psmouse->private; | |
| unsigned char *packet = psmouse->packet; | |
| int fingers; | |
| if (etd->fw_version < 0x020000) { | |
| /* | |
| * byte 0: D U p1 p2 1 p3 R L | |
| * byte 1: f 0 th tw x9 x8 y9 y8 | |
| */ | |
| fingers = ((packet[1] & 0x80) >> 7) + | |
| ((packet[1] & 0x30) >> 4); | |
| } else { | |
| /* | |
| * byte 0: n1 n0 p2 p1 1 p3 R L | |
| * byte 1: 0 0 0 0 x9 x8 y9 y8 | |
| */ | |
| fingers = (packet[0] & 0xc0) >> 6; | |
| } | |
| if (etd->jumpy_cursor) { | |
| if (fingers != 1) { | |
| etd->single_finger_reports = 0; | |
| } else if (etd->single_finger_reports < 2) { | |
| /* Discard first 2 reports of one finger, bogus */ | |
| etd->single_finger_reports++; | |
| elantech_debug("discarding packet\n"); | |
| return; | |
| } | |
| } | |
| input_report_key(dev, BTN_TOUCH, fingers != 0); | |
| /* | |
| * byte 2: x7 x6 x5 x4 x3 x2 x1 x0 | |
| * byte 3: y7 y6 y5 y4 y3 y2 y1 y0 | |
| */ | |
| if (fingers) { | |
| input_report_abs(dev, ABS_X, | |
| ((packet[1] & 0x0c) << 6) | packet[2]); | |
| input_report_abs(dev, ABS_Y, | |
| ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3])); | |
| } | |
| input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); | |
| input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); | |
| input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); | |
| input_report_key(dev, BTN_LEFT, packet[0] & 0x01); | |
| input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); | |
| if (etd->fw_version < 0x020000 && | |
| (etd->capabilities & ETP_CAP_HAS_ROCKER)) { | |
| /* rocker up */ | |
| input_report_key(dev, BTN_FORWARD, packet[0] & 0x40); | |
| /* rocker down */ | |
| input_report_key(dev, BTN_BACK, packet[0] & 0x80); | |
| } | |
| input_sync(dev); | |
| } | |
| static void elantech_set_slot(struct input_dev *dev, int slot, bool active, | |
| unsigned int x, unsigned int y) | |
| { | |
| input_mt_slot(dev, slot); | |
| input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); | |
| if (active) { | |
| input_report_abs(dev, ABS_MT_POSITION_X, x); | |
| input_report_abs(dev, ABS_MT_POSITION_Y, y); | |
| } | |
| } | |
| /* x1 < x2 and y1 < y2 when two fingers, x = y = 0 when not pressed */ | |
| static void elantech_report_semi_mt_data(struct input_dev *dev, | |
| unsigned int num_fingers, | |
| unsigned int x1, unsigned int y1, | |
| unsigned int x2, unsigned int y2) | |
| { | |
| elantech_set_slot(dev, 0, num_fingers != 0, x1, y1); | |
| elantech_set_slot(dev, 1, num_fingers == 2, x2, y2); | |
| } | |
| /* | |
| * Interpret complete data packets and report absolute mode input events for | |
| * hardware version 2. (6 byte packets) | |
| */ | |
| static void elantech_report_absolute_v2(struct psmouse *psmouse) | |
| { | |
| struct elantech_data *etd = psmouse->private; | |
| struct input_dev *dev = psmouse->dev; | |
| unsigned char *packet = psmouse->packet; | |
| unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0, width = 0, pres = 0; | |
| /* byte 0: n1 n0 . . . . R L */ | |
| fingers = (packet[0] & 0xc0) >> 6; | |
| input_report_key(dev, BTN_TOUCH, fingers != 0); | |
| switch (fingers) { | |
| case 3: | |
| /* | |
| * Same as one finger, except report of more than 3 fingers: | |
| * byte 3: n4 . w1 w0 . . . . | |
| */ | |
| if (packet[3] & 0x80) | |
| fingers = 4; | |
| /* pass through... */ | |
| case 1: | |
| /* | |
| * byte 1: . . . . . x10 x9 x8 | |
| * byte 2: x7 x6 x5 x4 x4 x2 x1 x0 | |
| */ | |
| x1 = ((packet[1] & 0x07) << 8) | packet[2]; | |
| /* | |
| * byte 4: . . . . . . y9 y8 | |
| * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 | |
| */ | |
| y1 = ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]); | |
| input_report_abs(dev, ABS_X, x1); | |
| input_report_abs(dev, ABS_Y, y1); | |
| pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4); | |
| width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4); | |
| break; | |
| case 2: | |
| /* | |
| * The coordinate of each finger is reported separately | |
| * with a lower resolution for two finger touches: | |
| * byte 0: . . ay8 ax8 . . . . | |
| * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 | |
| */ | |
| x1 = ((packet[0] & 0x10) << 4) | packet[1]; | |
| /* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */ | |
| y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]); | |
| /* | |
| * byte 3: . . by8 bx8 . . . . | |
| * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 | |
| */ | |
| x2 = ((packet[3] & 0x10) << 4) | packet[4]; | |
| /* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */ | |
| y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]); | |
| /* | |
| * For compatibility with the X Synaptics driver scale up | |
| * one coordinate and report as ordinary mouse movent | |
| */ | |
| input_report_abs(dev, ABS_X, x1 << 2); | |
| input_report_abs(dev, ABS_Y, y1 << 2); | |
| /* Unknown so just report sensible values */ | |
| pres = 127; | |
| width = 7; | |
| break; | |
| } | |
| elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); | |
| input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); | |
| input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); | |
| input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); | |
| input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4); | |
| input_report_key(dev, BTN_LEFT, packet[0] & 0x01); | |
| input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); | |
| if (etd->reports_pressure) { | |
| input_report_abs(dev, ABS_PRESSURE, pres); | |
| input_report_abs(dev, ABS_TOOL_WIDTH, width); | |
| } | |
| input_sync(dev); | |
| } | |
| static int elantech_check_parity_v1(struct psmouse *psmouse) | |
| { | |
| struct elantech_data *etd = psmouse->private; | |
| unsigned char *packet = psmouse->packet; | |
| unsigned char p1, p2, p3; | |
| /* Parity bits are placed differently */ | |
| if (etd->fw_version < 0x020000) { | |
| /* byte 0: D U p1 p2 1 p3 R L */ | |
| p1 = (packet[0] & 0x20) >> 5; | |
| p2 = (packet[0] & 0x10) >> 4; | |
| } else { | |
| /* byte 0: n1 n0 p2 p1 1 p3 R L */ | |
| p1 = (packet[0] & 0x10) >> 4; | |
| p2 = (packet[0] & 0x20) >> 5; | |
| } | |
| p3 = (packet[0] & 0x04) >> 2; | |
| return etd->parity[packet[1]] == p1 && | |
| etd->parity[packet[2]] == p2 && | |
| etd->parity[packet[3]] == p3; | |
| } | |
| /* | |
| * Process byte stream from mouse and handle complete packets | |
| */ | |
| static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse) | |
| { | |
| struct elantech_data *etd = psmouse->private; | |
| if (psmouse->pktcnt < psmouse->pktsize) | |
| return PSMOUSE_GOOD_DATA; | |
| if (etd->debug > 1) | |
| elantech_packet_dump(psmouse->packet, psmouse->pktsize); | |
| switch (etd->hw_version) { | |
| case 1: | |
| if (etd->paritycheck && !elantech_check_parity_v1(psmouse)) | |
| return PSMOUSE_BAD_DATA; | |
| elantech_report_absolute_v1(psmouse); | |
| break; | |
| case 2: | |
| /* We don't know how to check parity in protocol v2 */ | |
| elantech_report_absolute_v2(psmouse); | |
| break; | |
| } | |
| return PSMOUSE_FULL_PACKET; | |
| } | |
| /* | |
| * Put the touchpad into absolute mode | |
| */ | |
| static int elantech_set_absolute_mode(struct psmouse *psmouse) | |
| { | |
| struct elantech_data *etd = psmouse->private; | |
| unsigned char val; | |
| int tries = ETP_READ_BACK_TRIES; | |
| int rc = 0; | |
| switch (etd->hw_version) { | |
| case 1: | |
| etd->reg_10 = 0x16; | |
| etd->reg_11 = 0x8f; | |
| if (elantech_write_reg(psmouse, 0x10, etd->reg_10) || | |
| elantech_write_reg(psmouse, 0x11, etd->reg_11)) { | |
| rc = -1; | |
| } | |
| break; | |
| case 2: | |
| /* Windows driver values */ | |
| etd->reg_10 = 0x54; | |
| etd->reg_11 = 0x88; /* 0x8a */ | |
| etd->reg_21 = 0x60; /* 0x00 */ | |
| if (elantech_write_reg(psmouse, 0x10, etd->reg_10) || | |
| elantech_write_reg(psmouse, 0x11, etd->reg_11) || | |
| elantech_write_reg(psmouse, 0x21, etd->reg_21)) { | |
| rc = -1; | |
| break; | |
| } | |
| } | |
| if (rc == 0) { | |
| /* | |
| * Read back reg 0x10. For hardware version 1 we must make | |
| * sure the absolute mode bit is set. For hardware version 2 | |
| * the touchpad is probably initalising and not ready until | |
| * we read back the value we just wrote. | |
| */ | |
| do { | |
| rc = elantech_read_reg(psmouse, 0x10, &val); | |
| if (rc == 0) | |
| break; | |
| tries--; | |
| elantech_debug("retrying read (%d).\n", tries); | |
| msleep(ETP_READ_BACK_DELAY); | |
| } while (tries > 0); | |
| if (rc) { | |
| pr_err("failed to read back register 0x10.\n"); | |
| } else if (etd->hw_version == 1 && | |
| !(val & ETP_R10_ABSOLUTE_MODE)) { | |
| pr_err("touchpad refuses to switch to absolute mode.\n"); | |
| rc = -1; | |
| } | |
| } | |
| if (rc) | |
| pr_err("failed to initialise registers.\n"); | |
| return rc; | |
| } | |
| /* | |
| * Set the appropriate event bits for the input subsystem | |
| */ | |
| static void elantech_set_input_params(struct psmouse *psmouse) | |
| { | |
| struct input_dev *dev = psmouse->dev; | |
| struct elantech_data *etd = psmouse->private; | |
| __set_bit(EV_KEY, dev->evbit); | |
| __set_bit(EV_ABS, dev->evbit); | |
| __clear_bit(EV_REL, dev->evbit); | |
| __set_bit(BTN_LEFT, dev->keybit); | |
| __set_bit(BTN_RIGHT, dev->keybit); | |
| __set_bit(BTN_TOUCH, dev->keybit); | |
| __set_bit(BTN_TOOL_FINGER, dev->keybit); | |
| __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); | |
| __set_bit(BTN_TOOL_TRIPLETAP, dev->keybit); | |
| switch (etd->hw_version) { | |
| case 1: | |
| /* Rocker button */ | |
| if (etd->fw_version < 0x020000 && | |
| (etd->capabilities & ETP_CAP_HAS_ROCKER)) { | |
| __set_bit(BTN_FORWARD, dev->keybit); | |
| __set_bit(BTN_BACK, dev->keybit); | |
| } | |
| input_set_abs_params(dev, ABS_X, ETP_XMIN_V1, ETP_XMAX_V1, 0, 0); | |
| input_set_abs_params(dev, ABS_Y, ETP_YMIN_V1, ETP_YMAX_V1, 0, 0); | |
| break; | |
| case 2: | |
| __set_bit(BTN_TOOL_QUADTAP, dev->keybit); | |
| input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0); | |
| input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0); | |
| if (etd->reports_pressure) { | |
| input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2, | |
| ETP_PMAX_V2, 0, 0); | |
| input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, | |
| ETP_WMAX_V2, 0, 0); | |
| } | |
| __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); | |
| input_mt_init_slots(dev, 2); | |
| input_set_abs_params(dev, ABS_MT_POSITION_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0); | |
| input_set_abs_params(dev, ABS_MT_POSITION_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0); | |
| break; | |
| } | |
| } | |
| struct elantech_attr_data { | |
| size_t field_offset; | |
| unsigned char reg; | |
| }; | |
| /* | |
| * Display a register value by reading a sysfs entry | |
| */ | |
| static ssize_t elantech_show_int_attr(struct psmouse *psmouse, void *data, | |
| char *buf) | |
| { | |
| struct elantech_data *etd = psmouse->private; | |
| struct elantech_attr_data *attr = data; | |
| unsigned char *reg = (unsigned char *) etd + attr->field_offset; | |
| int rc = 0; | |
| if (attr->reg) | |
| rc = elantech_read_reg(psmouse, attr->reg, reg); | |
| return sprintf(buf, "0x%02x\n", (attr->reg && rc) ? -1 : *reg); | |
| } | |
| /* | |
| * Write a register value by writing a sysfs entry | |
| */ | |
| static ssize_t elantech_set_int_attr(struct psmouse *psmouse, | |
| void *data, const char *buf, size_t count) | |
| { | |
| struct elantech_data *etd = psmouse->private; | |
| struct elantech_attr_data *attr = data; | |
| unsigned char *reg = (unsigned char *) etd + attr->field_offset; | |
| unsigned long value; | |
| int err; | |
| err = strict_strtoul(buf, 16, &value); | |
| if (err) | |
| return err; | |
| if (value > 0xff) | |
| return -EINVAL; | |
| /* Do we need to preserve some bits for version 2 hardware too? */ | |
| if (etd->hw_version == 1) { | |
| if (attr->reg == 0x10) | |
| /* Force absolute mode always on */ | |
| value |= ETP_R10_ABSOLUTE_MODE; | |
| else if (attr->reg == 0x11) | |
| /* Force 4 byte mode always on */ | |
| value |= ETP_R11_4_BYTE_MODE; | |
| } | |
| if (!attr->reg || elantech_write_reg(psmouse, attr->reg, value) == 0) | |
| *reg = value; | |
| return count; | |
| } | |
| #define ELANTECH_INT_ATTR(_name, _register) \ | |
| static struct elantech_attr_data elantech_attr_##_name = { \ | |
| .field_offset = offsetof(struct elantech_data, _name), \ | |
| .reg = _register, \ | |
| }; \ | |
| PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \ | |
| &elantech_attr_##_name, \ | |
| elantech_show_int_attr, \ | |
| elantech_set_int_attr) | |
| ELANTECH_INT_ATTR(reg_10, 0x10); | |
| ELANTECH_INT_ATTR(reg_11, 0x11); | |
| ELANTECH_INT_ATTR(reg_20, 0x20); | |
| ELANTECH_INT_ATTR(reg_21, 0x21); | |
| ELANTECH_INT_ATTR(reg_22, 0x22); | |
| ELANTECH_INT_ATTR(reg_23, 0x23); | |
| ELANTECH_INT_ATTR(reg_24, 0x24); | |
| ELANTECH_INT_ATTR(reg_25, 0x25); | |
| ELANTECH_INT_ATTR(reg_26, 0x26); | |
| ELANTECH_INT_ATTR(debug, 0); | |
| ELANTECH_INT_ATTR(paritycheck, 0); | |
| static struct attribute *elantech_attrs[] = { | |
| &psmouse_attr_reg_10.dattr.attr, | |
| &psmouse_attr_reg_11.dattr.attr, | |
| &psmouse_attr_reg_20.dattr.attr, | |
| &psmouse_attr_reg_21.dattr.attr, | |
| &psmouse_attr_reg_22.dattr.attr, | |
| &psmouse_attr_reg_23.dattr.attr, | |
| &psmouse_attr_reg_24.dattr.attr, | |
| &psmouse_attr_reg_25.dattr.attr, | |
| &psmouse_attr_reg_26.dattr.attr, | |
| &psmouse_attr_debug.dattr.attr, | |
| &psmouse_attr_paritycheck.dattr.attr, | |
| NULL | |
| }; | |
| static struct attribute_group elantech_attr_group = { | |
| .attrs = elantech_attrs, | |
| }; | |
| static bool elantech_is_signature_valid(const unsigned char *param) | |
| { | |
| static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10 }; | |
| int i; | |
| if (param[0] == 0) | |
| return false; | |
| if (param[1] == 0) | |
| return true; | |
| for (i = 0; i < ARRAY_SIZE(rates); i++) | |
| if (param[2] == rates[i]) | |
| return false; | |
| return true; | |
| } | |
| /* | |
| * Use magic knock to detect Elantech touchpad | |
| */ | |
| int elantech_detect(struct psmouse *psmouse, bool set_properties) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| unsigned char param[3]; | |
| ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); | |
| if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || | |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || | |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || | |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { | |
| pr_debug("sending Elantech magic knock failed.\n"); | |
| return -1; | |
| } | |
| /* | |
| * Report this in case there are Elantech models that use a different | |
| * set of magic numbers | |
| */ | |
| if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) { | |
| pr_debug("unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n", | |
| param[0], param[1], param[2]); | |
| return -1; | |
| } | |
| /* | |
| * Query touchpad's firmware version and see if it reports known | |
| * value to avoid mis-detection. Logitech mice are known to respond | |
| * to Elantech magic knock and there might be more. | |
| */ | |
| if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) { | |
| pr_debug("failed to query firmware version.\n"); | |
| return -1; | |
| } | |
| pr_debug("Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n", | |
| param[0], param[1], param[2]); | |
| if (!elantech_is_signature_valid(param)) { | |
| if (!force_elantech) { | |
| pr_debug("Probably not a real Elantech touchpad. Aborting.\n"); | |
| return -1; | |
| } | |
| pr_debug("Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n"); | |
| } | |
| if (set_properties) { | |
| psmouse->vendor = "Elantech"; | |
| psmouse->name = "Touchpad"; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Clean up sysfs entries when disconnecting | |
| */ | |
| static void elantech_disconnect(struct psmouse *psmouse) | |
| { | |
| sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj, | |
| &elantech_attr_group); | |
| kfree(psmouse->private); | |
| psmouse->private = NULL; | |
| } | |
| /* | |
| * Put the touchpad back into absolute mode when reconnecting | |
| */ | |
| static int elantech_reconnect(struct psmouse *psmouse) | |
| { | |
| if (elantech_detect(psmouse, 0)) | |
| return -1; | |
| if (elantech_set_absolute_mode(psmouse)) { | |
| pr_err("failed to put touchpad back into absolute mode.\n"); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Initialize the touchpad and create sysfs entries | |
| */ | |
| int elantech_init(struct psmouse *psmouse) | |
| { | |
| struct elantech_data *etd; | |
| int i, error; | |
| unsigned char param[3]; | |
| psmouse->private = etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL); | |
| if (!etd) | |
| return -ENOMEM; | |
| etd->parity[0] = 1; | |
| for (i = 1; i < 256; i++) | |
| etd->parity[i] = etd->parity[i & (i - 1)] ^ 1; | |
| /* | |
| * Do the version query again so we can store the result | |
| */ | |
| if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) { | |
| pr_err("failed to query firmware version.\n"); | |
| goto init_fail; | |
| } | |
| etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2]; | |
| /* | |
| * Assume every version greater than this is new EeePC style | |
| * hardware with 6 byte packets | |
| */ | |
| if (etd->fw_version >= 0x020030) { | |
| etd->hw_version = 2; | |
| /* For now show extra debug information */ | |
| etd->debug = 1; | |
| /* Don't know how to do parity checking for version 2 */ | |
| etd->paritycheck = 0; | |
| if (etd->fw_version >= 0x020800) | |
| etd->reports_pressure = true; | |
| } else { | |
| etd->hw_version = 1; | |
| etd->paritycheck = 1; | |
| } | |
| pr_info("assuming hardware version %d, firmware version %d.%d.%d\n", | |
| etd->hw_version, param[0], param[1], param[2]); | |
| if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) { | |
| pr_err("failed to query capabilities.\n"); | |
| goto init_fail; | |
| } | |
| pr_info("Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n", | |
| param[0], param[1], param[2]); | |
| etd->capabilities = param[0]; | |
| /* | |
| * This firmware suffers from misreporting coordinates when | |
| * a touch action starts causing the mouse cursor or scrolled page | |
| * to jump. Enable a workaround. | |
| */ | |
| if (etd->fw_version == 0x020022 || etd->fw_version == 0x020600) { | |
| pr_info("firmware version 2.0.34/2.6.0 detected, enabling jumpy cursor workaround\n"); | |
| etd->jumpy_cursor = true; | |
| } | |
| if (elantech_set_absolute_mode(psmouse)) { | |
| pr_err("failed to put touchpad into absolute mode.\n"); | |
| goto init_fail; | |
| } | |
| elantech_set_input_params(psmouse); | |
| error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj, | |
| &elantech_attr_group); | |
| if (error) { | |
| pr_err("failed to create sysfs attributes, error: %d.\n", error); | |
| goto init_fail; | |
| } | |
| psmouse->protocol_handler = elantech_process_byte; | |
| psmouse->disconnect = elantech_disconnect; | |
| psmouse->reconnect = elantech_reconnect; | |
| psmouse->pktsize = etd->hw_version == 2 ? 6 : 4; | |
| return 0; | |
| init_fail: | |
| kfree(etd); | |
| return -1; | |
| } |