| /* | |
| * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs | |
| * | |
| * Copyright (C) 2010 Texas Instruments Inc | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/wait.h> | |
| #include <linux/clk.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/device.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/delay.h> | |
| #include <linux/io.h> | |
| #include <linux/mfd/core.h> | |
| #include <linux/mfd/ti_ssp.h> | |
| /* Register Offsets */ | |
| #define REG_REV 0x00 | |
| #define REG_IOSEL_1 0x04 | |
| #define REG_IOSEL_2 0x08 | |
| #define REG_PREDIV 0x0c | |
| #define REG_INTR_ST 0x10 | |
| #define REG_INTR_EN 0x14 | |
| #define REG_TEST_CTRL 0x18 | |
| /* Per port registers */ | |
| #define PORT_CFG_2 0x00 | |
| #define PORT_ADDR 0x04 | |
| #define PORT_DATA 0x08 | |
| #define PORT_CFG_1 0x0c | |
| #define PORT_STATE 0x10 | |
| #define SSP_PORT_CONFIG_MASK (SSP_EARLY_DIN | SSP_DELAY_DOUT) | |
| #define SSP_PORT_CLKRATE_MASK 0x0f | |
| #define SSP_SEQRAM_WR_EN BIT(4) | |
| #define SSP_SEQRAM_RD_EN BIT(5) | |
| #define SSP_START BIT(15) | |
| #define SSP_BUSY BIT(10) | |
| #define SSP_PORT_ASL BIT(7) | |
| #define SSP_PORT_CFO1 BIT(6) | |
| #define SSP_PORT_SEQRAM_SIZE 32 | |
| static const int ssp_port_base[] = {0x040, 0x080}; | |
| static const int ssp_port_seqram[] = {0x100, 0x180}; | |
| struct ti_ssp { | |
| struct resource *res; | |
| struct device *dev; | |
| void __iomem *regs; | |
| spinlock_t lock; | |
| struct clk *clk; | |
| int irq; | |
| wait_queue_head_t wqh; | |
| /* | |
| * Some of the iosel2 register bits always read-back as 0, we need to | |
| * remember these values so that we don't clobber previously set | |
| * values. | |
| */ | |
| u32 iosel2; | |
| }; | |
| static inline struct ti_ssp *dev_to_ssp(struct device *dev) | |
| { | |
| return dev_get_drvdata(dev->parent); | |
| } | |
| static inline int dev_to_port(struct device *dev) | |
| { | |
| return to_platform_device(dev)->id; | |
| } | |
| /* Register Access Helpers, rmw() functions need to run locked */ | |
| static inline u32 ssp_read(struct ti_ssp *ssp, int reg) | |
| { | |
| return __raw_readl(ssp->regs + reg); | |
| } | |
| static inline void ssp_write(struct ti_ssp *ssp, int reg, u32 val) | |
| { | |
| __raw_writel(val, ssp->regs + reg); | |
| } | |
| static inline void ssp_rmw(struct ti_ssp *ssp, int reg, u32 mask, u32 bits) | |
| { | |
| ssp_write(ssp, reg, (ssp_read(ssp, reg) & ~mask) | bits); | |
| } | |
| static inline u32 ssp_port_read(struct ti_ssp *ssp, int port, int reg) | |
| { | |
| return ssp_read(ssp, ssp_port_base[port] + reg); | |
| } | |
| static inline void ssp_port_write(struct ti_ssp *ssp, int port, int reg, | |
| u32 val) | |
| { | |
| ssp_write(ssp, ssp_port_base[port] + reg, val); | |
| } | |
| static inline void ssp_port_rmw(struct ti_ssp *ssp, int port, int reg, | |
| u32 mask, u32 bits) | |
| { | |
| ssp_rmw(ssp, ssp_port_base[port] + reg, mask, bits); | |
| } | |
| static inline void ssp_port_clr_bits(struct ti_ssp *ssp, int port, int reg, | |
| u32 bits) | |
| { | |
| ssp_port_rmw(ssp, port, reg, bits, 0); | |
| } | |
| static inline void ssp_port_set_bits(struct ti_ssp *ssp, int port, int reg, | |
| u32 bits) | |
| { | |
| ssp_port_rmw(ssp, port, reg, 0, bits); | |
| } | |
| /* Called to setup port clock mode, caller must hold ssp->lock */ | |
| static int __set_mode(struct ti_ssp *ssp, int port, int mode) | |
| { | |
| mode &= SSP_PORT_CONFIG_MASK; | |
| ssp_port_rmw(ssp, port, PORT_CFG_1, SSP_PORT_CONFIG_MASK, mode); | |
| return 0; | |
| } | |
| int ti_ssp_set_mode(struct device *dev, int mode) | |
| { | |
| struct ti_ssp *ssp = dev_to_ssp(dev); | |
| int port = dev_to_port(dev); | |
| int ret; | |
| spin_lock(&ssp->lock); | |
| ret = __set_mode(ssp, port, mode); | |
| spin_unlock(&ssp->lock); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(ti_ssp_set_mode); | |
| /* Called to setup iosel2, caller must hold ssp->lock */ | |
| static void __set_iosel2(struct ti_ssp *ssp, u32 mask, u32 val) | |
| { | |
| ssp->iosel2 = (ssp->iosel2 & ~mask) | val; | |
| ssp_write(ssp, REG_IOSEL_2, ssp->iosel2); | |
| } | |
| /* Called to setup port iosel, caller must hold ssp->lock */ | |
| static void __set_iosel(struct ti_ssp *ssp, int port, u32 iosel) | |
| { | |
| unsigned val, shift = port ? 16 : 0; | |
| /* IOSEL1 gets the least significant 16 bits */ | |
| val = ssp_read(ssp, REG_IOSEL_1); | |
| val &= 0xffff << (port ? 0 : 16); | |
| val |= (iosel & 0xffff) << (port ? 16 : 0); | |
| ssp_write(ssp, REG_IOSEL_1, val); | |
| /* IOSEL2 gets the most significant 16 bits */ | |
| val = (iosel >> 16) & 0x7; | |
| __set_iosel2(ssp, 0x7 << shift, val << shift); | |
| } | |
| int ti_ssp_set_iosel(struct device *dev, u32 iosel) | |
| { | |
| struct ti_ssp *ssp = dev_to_ssp(dev); | |
| int port = dev_to_port(dev); | |
| spin_lock(&ssp->lock); | |
| __set_iosel(ssp, port, iosel); | |
| spin_unlock(&ssp->lock); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(ti_ssp_set_iosel); | |
| int ti_ssp_load(struct device *dev, int offs, u32* prog, int len) | |
| { | |
| struct ti_ssp *ssp = dev_to_ssp(dev); | |
| int port = dev_to_port(dev); | |
| int i; | |
| if (len > SSP_PORT_SEQRAM_SIZE) | |
| return -ENOSPC; | |
| spin_lock(&ssp->lock); | |
| /* Enable SeqRAM access */ | |
| ssp_port_set_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN); | |
| /* Copy code */ | |
| for (i = 0; i < len; i++) { | |
| __raw_writel(prog[i], ssp->regs + offs + 4*i + | |
| ssp_port_seqram[port]); | |
| } | |
| /* Disable SeqRAM access */ | |
| ssp_port_clr_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN); | |
| spin_unlock(&ssp->lock); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(ti_ssp_load); | |
| int ti_ssp_raw_read(struct device *dev) | |
| { | |
| struct ti_ssp *ssp = dev_to_ssp(dev); | |
| int port = dev_to_port(dev); | |
| int shift = port ? 27 : 11; | |
| return (ssp_read(ssp, REG_IOSEL_2) >> shift) & 0xf; | |
| } | |
| EXPORT_SYMBOL(ti_ssp_raw_read); | |
| int ti_ssp_raw_write(struct device *dev, u32 val) | |
| { | |
| struct ti_ssp *ssp = dev_to_ssp(dev); | |
| int port = dev_to_port(dev), shift; | |
| spin_lock(&ssp->lock); | |
| shift = port ? 22 : 6; | |
| val &= 0xf; | |
| __set_iosel2(ssp, 0xf << shift, val << shift); | |
| spin_unlock(&ssp->lock); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(ti_ssp_raw_write); | |
| static inline int __xfer_done(struct ti_ssp *ssp, int port) | |
| { | |
| return !(ssp_port_read(ssp, port, PORT_CFG_1) & SSP_BUSY); | |
| } | |
| int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output) | |
| { | |
| struct ti_ssp *ssp = dev_to_ssp(dev); | |
| int port = dev_to_port(dev); | |
| int ret; | |
| if (pc & ~(0x3f)) | |
| return -EINVAL; | |
| /* Grab ssp->lock to serialize rmw on ssp registers */ | |
| spin_lock(&ssp->lock); | |
| ssp_port_write(ssp, port, PORT_ADDR, input >> 16); | |
| ssp_port_write(ssp, port, PORT_DATA, input & 0xffff); | |
| ssp_port_rmw(ssp, port, PORT_CFG_1, 0x3f, pc); | |
| /* grab wait queue head lock to avoid race with the isr */ | |
| spin_lock_irq(&ssp->wqh.lock); | |
| /* kick off sequence execution in hardware */ | |
| ssp_port_set_bits(ssp, port, PORT_CFG_1, SSP_START); | |
| /* drop ssp lock; no register writes beyond this */ | |
| spin_unlock(&ssp->lock); | |
| ret = wait_event_interruptible_locked_irq(ssp->wqh, | |
| __xfer_done(ssp, port)); | |
| spin_unlock_irq(&ssp->wqh.lock); | |
| if (ret < 0) | |
| return ret; | |
| if (output) { | |
| *output = (ssp_port_read(ssp, port, PORT_ADDR) << 16) | | |
| (ssp_port_read(ssp, port, PORT_DATA) & 0xffff); | |
| } | |
| ret = ssp_port_read(ssp, port, PORT_STATE) & 0x3f; /* stop address */ | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(ti_ssp_run); | |
| static irqreturn_t ti_ssp_interrupt(int irq, void *dev_data) | |
| { | |
| struct ti_ssp *ssp = dev_data; | |
| spin_lock(&ssp->wqh.lock); | |
| ssp_write(ssp, REG_INTR_ST, 0x3); | |
| wake_up_locked(&ssp->wqh); | |
| spin_unlock(&ssp->wqh.lock); | |
| return IRQ_HANDLED; | |
| } | |
| static int __devinit ti_ssp_probe(struct platform_device *pdev) | |
| { | |
| static struct ti_ssp *ssp; | |
| const struct ti_ssp_data *pdata = pdev->dev.platform_data; | |
| int error = 0, prediv = 0xff, id; | |
| unsigned long sysclk; | |
| struct device *dev = &pdev->dev; | |
| struct mfd_cell cells[2]; | |
| ssp = kzalloc(sizeof(*ssp), GFP_KERNEL); | |
| if (!ssp) { | |
| dev_err(dev, "cannot allocate device info\n"); | |
| return -ENOMEM; | |
| } | |
| ssp->dev = dev; | |
| dev_set_drvdata(dev, ssp); | |
| ssp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!ssp->res) { | |
| error = -ENODEV; | |
| dev_err(dev, "cannot determine register area\n"); | |
| goto error_res; | |
| } | |
| if (!request_mem_region(ssp->res->start, resource_size(ssp->res), | |
| pdev->name)) { | |
| error = -ENOMEM; | |
| dev_err(dev, "cannot claim register memory\n"); | |
| goto error_res; | |
| } | |
| ssp->regs = ioremap(ssp->res->start, resource_size(ssp->res)); | |
| if (!ssp->regs) { | |
| error = -ENOMEM; | |
| dev_err(dev, "cannot map register memory\n"); | |
| goto error_map; | |
| } | |
| ssp->clk = clk_get(dev, NULL); | |
| if (IS_ERR(ssp->clk)) { | |
| error = PTR_ERR(ssp->clk); | |
| dev_err(dev, "cannot claim device clock\n"); | |
| goto error_clk; | |
| } | |
| ssp->irq = platform_get_irq(pdev, 0); | |
| if (ssp->irq < 0) { | |
| error = -ENODEV; | |
| dev_err(dev, "unknown irq\n"); | |
| goto error_irq; | |
| } | |
| error = request_threaded_irq(ssp->irq, NULL, ti_ssp_interrupt, 0, | |
| dev_name(dev), ssp); | |
| if (error < 0) { | |
| dev_err(dev, "cannot acquire irq\n"); | |
| goto error_irq; | |
| } | |
| spin_lock_init(&ssp->lock); | |
| init_waitqueue_head(&ssp->wqh); | |
| /* Power on and initialize SSP */ | |
| error = clk_enable(ssp->clk); | |
| if (error) { | |
| dev_err(dev, "cannot enable device clock\n"); | |
| goto error_enable; | |
| } | |
| /* Reset registers to a sensible known state */ | |
| ssp_write(ssp, REG_IOSEL_1, 0); | |
| ssp_write(ssp, REG_IOSEL_2, 0); | |
| ssp_write(ssp, REG_INTR_EN, 0x3); | |
| ssp_write(ssp, REG_INTR_ST, 0x3); | |
| ssp_write(ssp, REG_TEST_CTRL, 0); | |
| ssp_port_write(ssp, 0, PORT_CFG_1, SSP_PORT_ASL); | |
| ssp_port_write(ssp, 1, PORT_CFG_1, SSP_PORT_ASL); | |
| ssp_port_write(ssp, 0, PORT_CFG_2, SSP_PORT_CFO1); | |
| ssp_port_write(ssp, 1, PORT_CFG_2, SSP_PORT_CFO1); | |
| sysclk = clk_get_rate(ssp->clk); | |
| if (pdata && pdata->out_clock) | |
| prediv = (sysclk / pdata->out_clock) - 1; | |
| prediv = clamp(prediv, 0, 0xff); | |
| ssp_rmw(ssp, REG_PREDIV, 0xff, prediv); | |
| memset(cells, 0, sizeof(cells)); | |
| for (id = 0; id < 2; id++) { | |
| const struct ti_ssp_dev_data *data = &pdata->dev_data[id]; | |
| cells[id].id = id; | |
| cells[id].name = data->dev_name; | |
| cells[id].platform_data = data->pdata; | |
| cells[id].data_size = data->pdata_size; | |
| } | |
| error = mfd_add_devices(dev, 0, cells, 2, NULL, 0); | |
| if (error < 0) { | |
| dev_err(dev, "cannot add mfd cells\n"); | |
| goto error_enable; | |
| } | |
| return 0; | |
| error_enable: | |
| free_irq(ssp->irq, ssp); | |
| error_irq: | |
| clk_put(ssp->clk); | |
| error_clk: | |
| iounmap(ssp->regs); | |
| error_map: | |
| release_mem_region(ssp->res->start, resource_size(ssp->res)); | |
| error_res: | |
| kfree(ssp); | |
| return error; | |
| } | |
| static int __devexit ti_ssp_remove(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct ti_ssp *ssp = dev_get_drvdata(dev); | |
| mfd_remove_devices(dev); | |
| clk_disable(ssp->clk); | |
| free_irq(ssp->irq, ssp); | |
| clk_put(ssp->clk); | |
| iounmap(ssp->regs); | |
| release_mem_region(ssp->res->start, resource_size(ssp->res)); | |
| kfree(ssp); | |
| dev_set_drvdata(dev, NULL); | |
| return 0; | |
| } | |
| static struct platform_driver ti_ssp_driver = { | |
| .probe = ti_ssp_probe, | |
| .remove = __devexit_p(ti_ssp_remove), | |
| .driver = { | |
| .name = "ti-ssp", | |
| .owner = THIS_MODULE, | |
| } | |
| }; | |
| static int __init ti_ssp_init(void) | |
| { | |
| return platform_driver_register(&ti_ssp_driver); | |
| } | |
| module_init(ti_ssp_init); | |
| static void __exit ti_ssp_exit(void) | |
| { | |
| platform_driver_unregister(&ti_ssp_driver); | |
| } | |
| module_exit(ti_ssp_exit); | |
| MODULE_DESCRIPTION("Sequencer Serial Port (SSP) Driver"); | |
| MODULE_AUTHOR("Cyril Chemparathy"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:ti-ssp"); |