| /* | |
| * DaVinci MDIO Module driver | |
| * | |
| * Copyright (C) 2010 Texas Instruments. | |
| * | |
| * Shamelessly ripped out of davinci_emac.c, original copyrights follow: | |
| * | |
| * Copyright (C) 2009 Texas Instruments. | |
| * | |
| * --------------------------------------------------------------------------- | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * --------------------------------------------------------------------------- | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/delay.h> | |
| #include <linux/sched.h> | |
| #include <linux/slab.h> | |
| #include <linux/phy.h> | |
| #include <linux/clk.h> | |
| #include <linux/err.h> | |
| #include <linux/io.h> | |
| #include <linux/davinci_emac.h> | |
| /* | |
| * This timeout definition is a worst-case ultra defensive measure against | |
| * unexpected controller lock ups. Ideally, we should never ever hit this | |
| * scenario in practice. | |
| */ | |
| #define MDIO_TIMEOUT 100 /* msecs */ | |
| #define PHY_REG_MASK 0x1f | |
| #define PHY_ID_MASK 0x1f | |
| #define DEF_OUT_FREQ 2200000 /* 2.2 MHz */ | |
| struct davinci_mdio_regs { | |
| u32 version; | |
| u32 control; | |
| #define CONTROL_IDLE BIT(31) | |
| #define CONTROL_ENABLE BIT(30) | |
| #define CONTROL_MAX_DIV (0xff) | |
| u32 alive; | |
| u32 link; | |
| u32 linkintraw; | |
| u32 linkintmasked; | |
| u32 __reserved_0[2]; | |
| u32 userintraw; | |
| u32 userintmasked; | |
| u32 userintmaskset; | |
| u32 userintmaskclr; | |
| u32 __reserved_1[20]; | |
| struct { | |
| u32 access; | |
| #define USERACCESS_GO BIT(31) | |
| #define USERACCESS_WRITE BIT(30) | |
| #define USERACCESS_ACK BIT(29) | |
| #define USERACCESS_READ (0) | |
| #define USERACCESS_DATA (0xffff) | |
| u32 physel; | |
| } user[0]; | |
| }; | |
| struct mdio_platform_data default_pdata = { | |
| .bus_freq = DEF_OUT_FREQ, | |
| }; | |
| struct davinci_mdio_data { | |
| struct mdio_platform_data pdata; | |
| struct davinci_mdio_regs __iomem *regs; | |
| spinlock_t lock; | |
| struct clk *clk; | |
| struct device *dev; | |
| struct mii_bus *bus; | |
| bool suspended; | |
| unsigned long access_time; /* jiffies */ | |
| }; | |
| static void __davinci_mdio_reset(struct davinci_mdio_data *data) | |
| { | |
| u32 mdio_in, div, mdio_out_khz, access_time; | |
| mdio_in = clk_get_rate(data->clk); | |
| div = (mdio_in / data->pdata.bus_freq) - 1; | |
| if (div > CONTROL_MAX_DIV) | |
| div = CONTROL_MAX_DIV; | |
| /* set enable and clock divider */ | |
| __raw_writel(div | CONTROL_ENABLE, &data->regs->control); | |
| /* | |
| * One mdio transaction consists of: | |
| * 32 bits of preamble | |
| * 32 bits of transferred data | |
| * 24 bits of bus yield (not needed unless shared?) | |
| */ | |
| mdio_out_khz = mdio_in / (1000 * (div + 1)); | |
| access_time = (88 * 1000) / mdio_out_khz; | |
| /* | |
| * In the worst case, we could be kicking off a user-access immediately | |
| * after the mdio bus scan state-machine triggered its own read. If | |
| * so, our request could get deferred by one access cycle. We | |
| * defensively allow for 4 access cycles. | |
| */ | |
| data->access_time = usecs_to_jiffies(access_time * 4); | |
| if (!data->access_time) | |
| data->access_time = 1; | |
| } | |
| static int davinci_mdio_reset(struct mii_bus *bus) | |
| { | |
| struct davinci_mdio_data *data = bus->priv; | |
| u32 phy_mask, ver; | |
| __davinci_mdio_reset(data); | |
| /* wait for scan logic to settle */ | |
| msleep(PHY_MAX_ADDR * data->access_time); | |
| /* dump hardware version info */ | |
| ver = __raw_readl(&data->regs->version); | |
| dev_info(data->dev, "davinci mdio revision %d.%d\n", | |
| (ver >> 8) & 0xff, ver & 0xff); | |
| /* get phy mask from the alive register */ | |
| phy_mask = __raw_readl(&data->regs->alive); | |
| if (phy_mask) { | |
| /* restrict mdio bus to live phys only */ | |
| dev_info(data->dev, "detected phy mask %x\n", ~phy_mask); | |
| phy_mask = ~phy_mask; | |
| } else { | |
| /* desperately scan all phys */ | |
| dev_warn(data->dev, "no live phy, scanning all\n"); | |
| phy_mask = 0; | |
| } | |
| data->bus->phy_mask = phy_mask; | |
| return 0; | |
| } | |
| /* wait until hardware is ready for another user access */ | |
| static inline int wait_for_user_access(struct davinci_mdio_data *data) | |
| { | |
| struct davinci_mdio_regs __iomem *regs = data->regs; | |
| unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT); | |
| u32 reg; | |
| while (time_after(timeout, jiffies)) { | |
| reg = __raw_readl(®s->user[0].access); | |
| if ((reg & USERACCESS_GO) == 0) | |
| return 0; | |
| reg = __raw_readl(®s->control); | |
| if ((reg & CONTROL_IDLE) == 0) | |
| continue; | |
| /* | |
| * An emac soft_reset may have clobbered the mdio controller's | |
| * state machine. We need to reset and retry the current | |
| * operation | |
| */ | |
| dev_warn(data->dev, "resetting idled controller\n"); | |
| __davinci_mdio_reset(data); | |
| return -EAGAIN; | |
| } | |
| reg = __raw_readl(®s->user[0].access); | |
| if ((reg & USERACCESS_GO) == 0) | |
| return 0; | |
| dev_err(data->dev, "timed out waiting for user access\n"); | |
| return -ETIMEDOUT; | |
| } | |
| /* wait until hardware state machine is idle */ | |
| static inline int wait_for_idle(struct davinci_mdio_data *data) | |
| { | |
| struct davinci_mdio_regs __iomem *regs = data->regs; | |
| unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT); | |
| while (time_after(timeout, jiffies)) { | |
| if (__raw_readl(®s->control) & CONTROL_IDLE) | |
| return 0; | |
| } | |
| dev_err(data->dev, "timed out waiting for idle\n"); | |
| return -ETIMEDOUT; | |
| } | |
| static int davinci_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg) | |
| { | |
| struct davinci_mdio_data *data = bus->priv; | |
| u32 reg; | |
| int ret; | |
| if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) | |
| return -EINVAL; | |
| spin_lock(&data->lock); | |
| if (data->suspended) { | |
| spin_unlock(&data->lock); | |
| return -ENODEV; | |
| } | |
| reg = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) | | |
| (phy_id << 16)); | |
| while (1) { | |
| ret = wait_for_user_access(data); | |
| if (ret == -EAGAIN) | |
| continue; | |
| if (ret < 0) | |
| break; | |
| __raw_writel(reg, &data->regs->user[0].access); | |
| ret = wait_for_user_access(data); | |
| if (ret == -EAGAIN) | |
| continue; | |
| if (ret < 0) | |
| break; | |
| reg = __raw_readl(&data->regs->user[0].access); | |
| ret = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -EIO; | |
| break; | |
| } | |
| spin_unlock(&data->lock); | |
| return ret; | |
| } | |
| static int davinci_mdio_write(struct mii_bus *bus, int phy_id, | |
| int phy_reg, u16 phy_data) | |
| { | |
| struct davinci_mdio_data *data = bus->priv; | |
| u32 reg; | |
| int ret; | |
| if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) | |
| return -EINVAL; | |
| spin_lock(&data->lock); | |
| if (data->suspended) { | |
| spin_unlock(&data->lock); | |
| return -ENODEV; | |
| } | |
| reg = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) | | |
| (phy_id << 16) | (phy_data & USERACCESS_DATA)); | |
| while (1) { | |
| ret = wait_for_user_access(data); | |
| if (ret == -EAGAIN) | |
| continue; | |
| if (ret < 0) | |
| break; | |
| __raw_writel(reg, &data->regs->user[0].access); | |
| ret = wait_for_user_access(data); | |
| if (ret == -EAGAIN) | |
| continue; | |
| break; | |
| } | |
| spin_unlock(&data->lock); | |
| return 0; | |
| } | |
| static int __devinit davinci_mdio_probe(struct platform_device *pdev) | |
| { | |
| struct mdio_platform_data *pdata = pdev->dev.platform_data; | |
| struct device *dev = &pdev->dev; | |
| struct davinci_mdio_data *data; | |
| struct resource *res; | |
| struct phy_device *phy; | |
| int ret, addr; | |
| data = kzalloc(sizeof(*data), GFP_KERNEL); | |
| if (!data) { | |
| dev_err(dev, "failed to alloc device data\n"); | |
| return -ENOMEM; | |
| } | |
| data->pdata = pdata ? (*pdata) : default_pdata; | |
| data->bus = mdiobus_alloc(); | |
| if (!data->bus) { | |
| dev_err(dev, "failed to alloc mii bus\n"); | |
| ret = -ENOMEM; | |
| goto bail_out; | |
| } | |
| data->bus->name = dev_name(dev); | |
| data->bus->read = davinci_mdio_read, | |
| data->bus->write = davinci_mdio_write, | |
| data->bus->reset = davinci_mdio_reset, | |
| data->bus->parent = dev; | |
| data->bus->priv = data; | |
| snprintf(data->bus->id, MII_BUS_ID_SIZE, "%x", pdev->id); | |
| data->clk = clk_get(dev, NULL); | |
| if (IS_ERR(data->clk)) { | |
| data->clk = NULL; | |
| dev_err(dev, "failed to get device clock\n"); | |
| ret = PTR_ERR(data->clk); | |
| goto bail_out; | |
| } | |
| clk_enable(data->clk); | |
| dev_set_drvdata(dev, data); | |
| data->dev = dev; | |
| spin_lock_init(&data->lock); | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) { | |
| dev_err(dev, "could not find register map resource\n"); | |
| ret = -ENOENT; | |
| goto bail_out; | |
| } | |
| res = devm_request_mem_region(dev, res->start, resource_size(res), | |
| dev_name(dev)); | |
| if (!res) { | |
| dev_err(dev, "could not allocate register map resource\n"); | |
| ret = -ENXIO; | |
| goto bail_out; | |
| } | |
| data->regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); | |
| if (!data->regs) { | |
| dev_err(dev, "could not map mdio registers\n"); | |
| ret = -ENOMEM; | |
| goto bail_out; | |
| } | |
| /* register the mii bus */ | |
| ret = mdiobus_register(data->bus); | |
| if (ret) | |
| goto bail_out; | |
| /* scan and dump the bus */ | |
| for (addr = 0; addr < PHY_MAX_ADDR; addr++) { | |
| phy = data->bus->phy_map[addr]; | |
| if (phy) { | |
| dev_info(dev, "phy[%d]: device %s, driver %s\n", | |
| phy->addr, dev_name(&phy->dev), | |
| phy->drv ? phy->drv->name : "unknown"); | |
| } | |
| } | |
| return 0; | |
| bail_out: | |
| if (data->bus) | |
| mdiobus_free(data->bus); | |
| if (data->clk) { | |
| clk_disable(data->clk); | |
| clk_put(data->clk); | |
| } | |
| kfree(data); | |
| return ret; | |
| } | |
| static int __devexit davinci_mdio_remove(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct davinci_mdio_data *data = dev_get_drvdata(dev); | |
| if (data->bus) | |
| mdiobus_free(data->bus); | |
| if (data->clk) { | |
| clk_disable(data->clk); | |
| clk_put(data->clk); | |
| } | |
| dev_set_drvdata(dev, NULL); | |
| kfree(data); | |
| return 0; | |
| } | |
| static int davinci_mdio_suspend(struct device *dev) | |
| { | |
| struct davinci_mdio_data *data = dev_get_drvdata(dev); | |
| u32 ctrl; | |
| spin_lock(&data->lock); | |
| /* shutdown the scan state machine */ | |
| ctrl = __raw_readl(&data->regs->control); | |
| ctrl &= ~CONTROL_ENABLE; | |
| __raw_writel(ctrl, &data->regs->control); | |
| wait_for_idle(data); | |
| if (data->clk) | |
| clk_disable(data->clk); | |
| data->suspended = true; | |
| spin_unlock(&data->lock); | |
| return 0; | |
| } | |
| static int davinci_mdio_resume(struct device *dev) | |
| { | |
| struct davinci_mdio_data *data = dev_get_drvdata(dev); | |
| u32 ctrl; | |
| spin_lock(&data->lock); | |
| if (data->clk) | |
| clk_enable(data->clk); | |
| /* restart the scan state machine */ | |
| ctrl = __raw_readl(&data->regs->control); | |
| ctrl |= CONTROL_ENABLE; | |
| __raw_writel(ctrl, &data->regs->control); | |
| data->suspended = false; | |
| spin_unlock(&data->lock); | |
| return 0; | |
| } | |
| static const struct dev_pm_ops davinci_mdio_pm_ops = { | |
| .suspend = davinci_mdio_suspend, | |
| .resume = davinci_mdio_resume, | |
| }; | |
| static struct platform_driver davinci_mdio_driver = { | |
| .driver = { | |
| .name = "davinci_mdio", | |
| .owner = THIS_MODULE, | |
| .pm = &davinci_mdio_pm_ops, | |
| }, | |
| .probe = davinci_mdio_probe, | |
| .remove = __devexit_p(davinci_mdio_remove), | |
| }; | |
| static int __init davinci_mdio_init(void) | |
| { | |
| return platform_driver_register(&davinci_mdio_driver); | |
| } | |
| device_initcall(davinci_mdio_init); | |
| static void __exit davinci_mdio_exit(void) | |
| { | |
| platform_driver_unregister(&davinci_mdio_driver); | |
| } | |
| module_exit(davinci_mdio_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("DaVinci MDIO driver"); |