| /**************************************************************************** | |
| * Driver for Solarflare Solarstorm network controllers and boards | |
| * Copyright 2005-2006 Fen Systems Ltd. | |
| * Copyright 2006-2010 Solarflare Communications Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License version 2 as published | |
| * by the Free Software Foundation, incorporated herein by reference. | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/delay.h> | |
| #include <linux/pci.h> | |
| #include <linux/module.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/i2c.h> | |
| #include <linux/mii.h> | |
| #include <linux/slab.h> | |
| #include "net_driver.h" | |
| #include "bitfield.h" | |
| #include "efx.h" | |
| #include "mac.h" | |
| #include "spi.h" | |
| #include "nic.h" | |
| #include "regs.h" | |
| #include "io.h" | |
| #include "phy.h" | |
| #include "workarounds.h" | |
| /* Hardware control for SFC4000 (aka Falcon). */ | |
| static const unsigned int | |
| /* "Large" EEPROM device: Atmel AT25640 or similar | |
| * 8 KB, 16-bit address, 32 B write block */ | |
| large_eeprom_type = ((13 << SPI_DEV_TYPE_SIZE_LBN) | |
| | (2 << SPI_DEV_TYPE_ADDR_LEN_LBN) | |
| | (5 << SPI_DEV_TYPE_BLOCK_SIZE_LBN)), | |
| /* Default flash device: Atmel AT25F1024 | |
| * 128 KB, 24-bit address, 32 KB erase block, 256 B write block */ | |
| default_flash_type = ((17 << SPI_DEV_TYPE_SIZE_LBN) | |
| | (3 << SPI_DEV_TYPE_ADDR_LEN_LBN) | |
| | (0x52 << SPI_DEV_TYPE_ERASE_CMD_LBN) | |
| | (15 << SPI_DEV_TYPE_ERASE_SIZE_LBN) | |
| | (8 << SPI_DEV_TYPE_BLOCK_SIZE_LBN)); | |
| /************************************************************************** | |
| * | |
| * I2C bus - this is a bit-bashing interface using GPIO pins | |
| * Note that it uses the output enables to tristate the outputs | |
| * SDA is the data pin and SCL is the clock | |
| * | |
| ************************************************************************** | |
| */ | |
| static void falcon_setsda(void *data, int state) | |
| { | |
| struct efx_nic *efx = (struct efx_nic *)data; | |
| efx_oword_t reg; | |
| efx_reado(efx, ®, FR_AB_GPIO_CTL); | |
| EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO3_OEN, !state); | |
| efx_writeo(efx, ®, FR_AB_GPIO_CTL); | |
| } | |
| static void falcon_setscl(void *data, int state) | |
| { | |
| struct efx_nic *efx = (struct efx_nic *)data; | |
| efx_oword_t reg; | |
| efx_reado(efx, ®, FR_AB_GPIO_CTL); | |
| EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO0_OEN, !state); | |
| efx_writeo(efx, ®, FR_AB_GPIO_CTL); | |
| } | |
| static int falcon_getsda(void *data) | |
| { | |
| struct efx_nic *efx = (struct efx_nic *)data; | |
| efx_oword_t reg; | |
| efx_reado(efx, ®, FR_AB_GPIO_CTL); | |
| return EFX_OWORD_FIELD(reg, FRF_AB_GPIO3_IN); | |
| } | |
| static int falcon_getscl(void *data) | |
| { | |
| struct efx_nic *efx = (struct efx_nic *)data; | |
| efx_oword_t reg; | |
| efx_reado(efx, ®, FR_AB_GPIO_CTL); | |
| return EFX_OWORD_FIELD(reg, FRF_AB_GPIO0_IN); | |
| } | |
| static struct i2c_algo_bit_data falcon_i2c_bit_operations = { | |
| .setsda = falcon_setsda, | |
| .setscl = falcon_setscl, | |
| .getsda = falcon_getsda, | |
| .getscl = falcon_getscl, | |
| .udelay = 5, | |
| /* Wait up to 50 ms for slave to let us pull SCL high */ | |
| .timeout = DIV_ROUND_UP(HZ, 20), | |
| }; | |
| static void falcon_push_irq_moderation(struct efx_channel *channel) | |
| { | |
| efx_dword_t timer_cmd; | |
| struct efx_nic *efx = channel->efx; | |
| /* Set timer register */ | |
| if (channel->irq_moderation) { | |
| EFX_POPULATE_DWORD_2(timer_cmd, | |
| FRF_AB_TC_TIMER_MODE, | |
| FFE_BB_TIMER_MODE_INT_HLDOFF, | |
| FRF_AB_TC_TIMER_VAL, | |
| channel->irq_moderation - 1); | |
| } else { | |
| EFX_POPULATE_DWORD_2(timer_cmd, | |
| FRF_AB_TC_TIMER_MODE, | |
| FFE_BB_TIMER_MODE_DIS, | |
| FRF_AB_TC_TIMER_VAL, 0); | |
| } | |
| BUILD_BUG_ON(FR_AA_TIMER_COMMAND_KER != FR_BZ_TIMER_COMMAND_P0); | |
| efx_writed_page_locked(efx, &timer_cmd, FR_BZ_TIMER_COMMAND_P0, | |
| channel->channel); | |
| } | |
| static void falcon_deconfigure_mac_wrapper(struct efx_nic *efx); | |
| static void falcon_prepare_flush(struct efx_nic *efx) | |
| { | |
| falcon_deconfigure_mac_wrapper(efx); | |
| /* Wait for the tx and rx fifo's to get to the next packet boundary | |
| * (~1ms without back-pressure), then to drain the remainder of the | |
| * fifo's at data path speeds (negligible), with a healthy margin. */ | |
| msleep(10); | |
| } | |
| /* Acknowledge a legacy interrupt from Falcon | |
| * | |
| * This acknowledges a legacy (not MSI) interrupt via INT_ACK_KER_REG. | |
| * | |
| * Due to SFC bug 3706 (silicon revision <=A1) reads can be duplicated in the | |
| * BIU. Interrupt acknowledge is read sensitive so must write instead | |
| * (then read to ensure the BIU collector is flushed) | |
| * | |
| * NB most hardware supports MSI interrupts | |
| */ | |
| inline void falcon_irq_ack_a1(struct efx_nic *efx) | |
| { | |
| efx_dword_t reg; | |
| EFX_POPULATE_DWORD_1(reg, FRF_AA_INT_ACK_KER_FIELD, 0xb7eb7e); | |
| efx_writed(efx, ®, FR_AA_INT_ACK_KER); | |
| efx_readd(efx, ®, FR_AA_WORK_AROUND_BROKEN_PCI_READS); | |
| } | |
| irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id) | |
| { | |
| struct efx_nic *efx = dev_id; | |
| efx_oword_t *int_ker = efx->irq_status.addr; | |
| int syserr; | |
| int queues; | |
| /* Check to see if this is our interrupt. If it isn't, we | |
| * exit without having touched the hardware. | |
| */ | |
| if (unlikely(EFX_OWORD_IS_ZERO(*int_ker))) { | |
| netif_vdbg(efx, intr, efx->net_dev, | |
| "IRQ %d on CPU %d not for me\n", irq, | |
| raw_smp_processor_id()); | |
| return IRQ_NONE; | |
| } | |
| efx->last_irq_cpu = raw_smp_processor_id(); | |
| netif_vdbg(efx, intr, efx->net_dev, | |
| "IRQ %d on CPU %d status " EFX_OWORD_FMT "\n", | |
| irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker)); | |
| /* Determine interrupting queues, clear interrupt status | |
| * register and acknowledge the device interrupt. | |
| */ | |
| BUILD_BUG_ON(FSF_AZ_NET_IVEC_INT_Q_WIDTH > EFX_MAX_CHANNELS); | |
| queues = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_INT_Q); | |
| /* Check to see if we have a serious error condition */ | |
| if (queues & (1U << efx->fatal_irq_level)) { | |
| syserr = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_FATAL_INT); | |
| if (unlikely(syserr)) | |
| return efx_nic_fatal_interrupt(efx); | |
| } | |
| EFX_ZERO_OWORD(*int_ker); | |
| wmb(); /* Ensure the vector is cleared before interrupt ack */ | |
| falcon_irq_ack_a1(efx); | |
| if (queues & 1) | |
| efx_schedule_channel(efx_get_channel(efx, 0)); | |
| if (queues & 2) | |
| efx_schedule_channel(efx_get_channel(efx, 1)); | |
| return IRQ_HANDLED; | |
| } | |
| /************************************************************************** | |
| * | |
| * EEPROM/flash | |
| * | |
| ************************************************************************** | |
| */ | |
| #define FALCON_SPI_MAX_LEN sizeof(efx_oword_t) | |
| static int falcon_spi_poll(struct efx_nic *efx) | |
| { | |
| efx_oword_t reg; | |
| efx_reado(efx, ®, FR_AB_EE_SPI_HCMD); | |
| return EFX_OWORD_FIELD(reg, FRF_AB_EE_SPI_HCMD_CMD_EN) ? -EBUSY : 0; | |
| } | |
| /* Wait for SPI command completion */ | |
| static int falcon_spi_wait(struct efx_nic *efx) | |
| { | |
| /* Most commands will finish quickly, so we start polling at | |
| * very short intervals. Sometimes the command may have to | |
| * wait for VPD or expansion ROM access outside of our | |
| * control, so we allow up to 100 ms. */ | |
| unsigned long timeout = jiffies + 1 + DIV_ROUND_UP(HZ, 10); | |
| int i; | |
| for (i = 0; i < 10; i++) { | |
| if (!falcon_spi_poll(efx)) | |
| return 0; | |
| udelay(10); | |
| } | |
| for (;;) { | |
| if (!falcon_spi_poll(efx)) | |
| return 0; | |
| if (time_after_eq(jiffies, timeout)) { | |
| netif_err(efx, hw, efx->net_dev, | |
| "timed out waiting for SPI\n"); | |
| return -ETIMEDOUT; | |
| } | |
| schedule_timeout_uninterruptible(1); | |
| } | |
| } | |
| int falcon_spi_cmd(struct efx_nic *efx, const struct efx_spi_device *spi, | |
| unsigned int command, int address, | |
| const void *in, void *out, size_t len) | |
| { | |
| bool addressed = (address >= 0); | |
| bool reading = (out != NULL); | |
| efx_oword_t reg; | |
| int rc; | |
| /* Input validation */ | |
| if (len > FALCON_SPI_MAX_LEN) | |
| return -EINVAL; | |
| /* Check that previous command is not still running */ | |
| rc = falcon_spi_poll(efx); | |
| if (rc) | |
| return rc; | |
| /* Program address register, if we have an address */ | |
| if (addressed) { | |
| EFX_POPULATE_OWORD_1(reg, FRF_AB_EE_SPI_HADR_ADR, address); | |
| efx_writeo(efx, ®, FR_AB_EE_SPI_HADR); | |
| } | |
| /* Program data register, if we have data */ | |
| if (in != NULL) { | |
| memcpy(®, in, len); | |
| efx_writeo(efx, ®, FR_AB_EE_SPI_HDATA); | |
| } | |
| /* Issue read/write command */ | |
| EFX_POPULATE_OWORD_7(reg, | |
| FRF_AB_EE_SPI_HCMD_CMD_EN, 1, | |
| FRF_AB_EE_SPI_HCMD_SF_SEL, spi->device_id, | |
| FRF_AB_EE_SPI_HCMD_DABCNT, len, | |
| FRF_AB_EE_SPI_HCMD_READ, reading, | |
| FRF_AB_EE_SPI_HCMD_DUBCNT, 0, | |
| FRF_AB_EE_SPI_HCMD_ADBCNT, | |
| (addressed ? spi->addr_len : 0), | |
| FRF_AB_EE_SPI_HCMD_ENC, command); | |
| efx_writeo(efx, ®, FR_AB_EE_SPI_HCMD); | |
| /* Wait for read/write to complete */ | |
| rc = falcon_spi_wait(efx); | |
| if (rc) | |
| return rc; | |
| /* Read data */ | |
| if (out != NULL) { | |
| efx_reado(efx, ®, FR_AB_EE_SPI_HDATA); | |
| memcpy(out, ®, len); | |
| } | |
| return 0; | |
| } | |
| static size_t | |
| falcon_spi_write_limit(const struct efx_spi_device *spi, size_t start) | |
| { | |
| return min(FALCON_SPI_MAX_LEN, | |
| (spi->block_size - (start & (spi->block_size - 1)))); | |
| } | |
| static inline u8 | |
| efx_spi_munge_command(const struct efx_spi_device *spi, | |
| const u8 command, const unsigned int address) | |
| { | |
| return command | (((address >> 8) & spi->munge_address) << 3); | |
| } | |
| /* Wait up to 10 ms for buffered write completion */ | |
| int | |
| falcon_spi_wait_write(struct efx_nic *efx, const struct efx_spi_device *spi) | |
| { | |
| unsigned long timeout = jiffies + 1 + DIV_ROUND_UP(HZ, 100); | |
| u8 status; | |
| int rc; | |
| for (;;) { | |
| rc = falcon_spi_cmd(efx, spi, SPI_RDSR, -1, NULL, | |
| &status, sizeof(status)); | |
| if (rc) | |
| return rc; | |
| if (!(status & SPI_STATUS_NRDY)) | |
| return 0; | |
| if (time_after_eq(jiffies, timeout)) { | |
| netif_err(efx, hw, efx->net_dev, | |
| "SPI write timeout on device %d" | |
| " last status=0x%02x\n", | |
| spi->device_id, status); | |
| return -ETIMEDOUT; | |
| } | |
| schedule_timeout_uninterruptible(1); | |
| } | |
| } | |
| int falcon_spi_read(struct efx_nic *efx, const struct efx_spi_device *spi, | |
| loff_t start, size_t len, size_t *retlen, u8 *buffer) | |
| { | |
| size_t block_len, pos = 0; | |
| unsigned int command; | |
| int rc = 0; | |
| while (pos < len) { | |
| block_len = min(len - pos, FALCON_SPI_MAX_LEN); | |
| command = efx_spi_munge_command(spi, SPI_READ, start + pos); | |
| rc = falcon_spi_cmd(efx, spi, command, start + pos, NULL, | |
| buffer + pos, block_len); | |
| if (rc) | |
| break; | |
| pos += block_len; | |
| /* Avoid locking up the system */ | |
| cond_resched(); | |
| if (signal_pending(current)) { | |
| rc = -EINTR; | |
| break; | |
| } | |
| } | |
| if (retlen) | |
| *retlen = pos; | |
| return rc; | |
| } | |
| int | |
| falcon_spi_write(struct efx_nic *efx, const struct efx_spi_device *spi, | |
| loff_t start, size_t len, size_t *retlen, const u8 *buffer) | |
| { | |
| u8 verify_buffer[FALCON_SPI_MAX_LEN]; | |
| size_t block_len, pos = 0; | |
| unsigned int command; | |
| int rc = 0; | |
| while (pos < len) { | |
| rc = falcon_spi_cmd(efx, spi, SPI_WREN, -1, NULL, NULL, 0); | |
| if (rc) | |
| break; | |
| block_len = min(len - pos, | |
| falcon_spi_write_limit(spi, start + pos)); | |
| command = efx_spi_munge_command(spi, SPI_WRITE, start + pos); | |
| rc = falcon_spi_cmd(efx, spi, command, start + pos, | |
| buffer + pos, NULL, block_len); | |
| if (rc) | |
| break; | |
| rc = falcon_spi_wait_write(efx, spi); | |
| if (rc) | |
| break; | |
| command = efx_spi_munge_command(spi, SPI_READ, start + pos); | |
| rc = falcon_spi_cmd(efx, spi, command, start + pos, | |
| NULL, verify_buffer, block_len); | |
| if (memcmp(verify_buffer, buffer + pos, block_len)) { | |
| rc = -EIO; | |
| break; | |
| } | |
| pos += block_len; | |
| /* Avoid locking up the system */ | |
| cond_resched(); | |
| if (signal_pending(current)) { | |
| rc = -EINTR; | |
| break; | |
| } | |
| } | |
| if (retlen) | |
| *retlen = pos; | |
| return rc; | |
| } | |
| /************************************************************************** | |
| * | |
| * MAC wrapper | |
| * | |
| ************************************************************************** | |
| */ | |
| static void falcon_push_multicast_hash(struct efx_nic *efx) | |
| { | |
| union efx_multicast_hash *mc_hash = &efx->multicast_hash; | |
| WARN_ON(!mutex_is_locked(&efx->mac_lock)); | |
| efx_writeo(efx, &mc_hash->oword[0], FR_AB_MAC_MC_HASH_REG0); | |
| efx_writeo(efx, &mc_hash->oword[1], FR_AB_MAC_MC_HASH_REG1); | |
| } | |
| static void falcon_reset_macs(struct efx_nic *efx) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| efx_oword_t reg, mac_ctrl; | |
| int count; | |
| if (efx_nic_rev(efx) < EFX_REV_FALCON_B0) { | |
| /* It's not safe to use GLB_CTL_REG to reset the | |
| * macs, so instead use the internal MAC resets | |
| */ | |
| EFX_POPULATE_OWORD_1(reg, FRF_AB_XM_CORE_RST, 1); | |
| efx_writeo(efx, ®, FR_AB_XM_GLB_CFG); | |
| for (count = 0; count < 10000; count++) { | |
| efx_reado(efx, ®, FR_AB_XM_GLB_CFG); | |
| if (EFX_OWORD_FIELD(reg, FRF_AB_XM_CORE_RST) == | |
| 0) | |
| return; | |
| udelay(10); | |
| } | |
| netif_err(efx, hw, efx->net_dev, | |
| "timed out waiting for XMAC core reset\n"); | |
| } | |
| /* Mac stats will fail whist the TX fifo is draining */ | |
| WARN_ON(nic_data->stats_disable_count == 0); | |
| efx_reado(efx, &mac_ctrl, FR_AB_MAC_CTRL); | |
| EFX_SET_OWORD_FIELD(mac_ctrl, FRF_BB_TXFIFO_DRAIN_EN, 1); | |
| efx_writeo(efx, &mac_ctrl, FR_AB_MAC_CTRL); | |
| efx_reado(efx, ®, FR_AB_GLB_CTL); | |
| EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGTX, 1); | |
| EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGRX, 1); | |
| EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_EM, 1); | |
| efx_writeo(efx, ®, FR_AB_GLB_CTL); | |
| count = 0; | |
| while (1) { | |
| efx_reado(efx, ®, FR_AB_GLB_CTL); | |
| if (!EFX_OWORD_FIELD(reg, FRF_AB_RST_XGTX) && | |
| !EFX_OWORD_FIELD(reg, FRF_AB_RST_XGRX) && | |
| !EFX_OWORD_FIELD(reg, FRF_AB_RST_EM)) { | |
| netif_dbg(efx, hw, efx->net_dev, | |
| "Completed MAC reset after %d loops\n", | |
| count); | |
| break; | |
| } | |
| if (count > 20) { | |
| netif_err(efx, hw, efx->net_dev, "MAC reset failed\n"); | |
| break; | |
| } | |
| count++; | |
| udelay(10); | |
| } | |
| /* Ensure the correct MAC is selected before statistics | |
| * are re-enabled by the caller */ | |
| efx_writeo(efx, &mac_ctrl, FR_AB_MAC_CTRL); | |
| falcon_setup_xaui(efx); | |
| } | |
| void falcon_drain_tx_fifo(struct efx_nic *efx) | |
| { | |
| efx_oword_t reg; | |
| if ((efx_nic_rev(efx) < EFX_REV_FALCON_B0) || | |
| (efx->loopback_mode != LOOPBACK_NONE)) | |
| return; | |
| efx_reado(efx, ®, FR_AB_MAC_CTRL); | |
| /* There is no point in draining more than once */ | |
| if (EFX_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN)) | |
| return; | |
| falcon_reset_macs(efx); | |
| } | |
| static void falcon_deconfigure_mac_wrapper(struct efx_nic *efx) | |
| { | |
| efx_oword_t reg; | |
| if (efx_nic_rev(efx) < EFX_REV_FALCON_B0) | |
| return; | |
| /* Isolate the MAC -> RX */ | |
| efx_reado(efx, ®, FR_AZ_RX_CFG); | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 0); | |
| efx_writeo(efx, ®, FR_AZ_RX_CFG); | |
| /* Isolate TX -> MAC */ | |
| falcon_drain_tx_fifo(efx); | |
| } | |
| void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) | |
| { | |
| struct efx_link_state *link_state = &efx->link_state; | |
| efx_oword_t reg; | |
| int link_speed, isolate; | |
| isolate = (efx->reset_pending != RESET_TYPE_NONE); | |
| switch (link_state->speed) { | |
| case 10000: link_speed = 3; break; | |
| case 1000: link_speed = 2; break; | |
| case 100: link_speed = 1; break; | |
| default: link_speed = 0; break; | |
| } | |
| /* MAC_LINK_STATUS controls MAC backpressure but doesn't work | |
| * as advertised. Disable to ensure packets are not | |
| * indefinitely held and TX queue can be flushed at any point | |
| * while the link is down. */ | |
| EFX_POPULATE_OWORD_5(reg, | |
| FRF_AB_MAC_XOFF_VAL, 0xffff /* max pause time */, | |
| FRF_AB_MAC_BCAD_ACPT, 1, | |
| FRF_AB_MAC_UC_PROM, efx->promiscuous, | |
| FRF_AB_MAC_LINK_STATUS, 1, /* always set */ | |
| FRF_AB_MAC_SPEED, link_speed); | |
| /* On B0, MAC backpressure can be disabled and packets get | |
| * discarded. */ | |
| if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) { | |
| EFX_SET_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN, | |
| !link_state->up || isolate); | |
| } | |
| efx_writeo(efx, ®, FR_AB_MAC_CTRL); | |
| /* Restore the multicast hash registers. */ | |
| falcon_push_multicast_hash(efx); | |
| efx_reado(efx, ®, FR_AZ_RX_CFG); | |
| /* Enable XOFF signal from RX FIFO (we enabled it during NIC | |
| * initialisation but it may read back as 0) */ | |
| EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1); | |
| /* Unisolate the MAC -> RX */ | |
| if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, !isolate); | |
| efx_writeo(efx, ®, FR_AZ_RX_CFG); | |
| } | |
| static void falcon_stats_request(struct efx_nic *efx) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| efx_oword_t reg; | |
| WARN_ON(nic_data->stats_pending); | |
| WARN_ON(nic_data->stats_disable_count); | |
| if (nic_data->stats_dma_done == NULL) | |
| return; /* no mac selected */ | |
| *nic_data->stats_dma_done = FALCON_STATS_NOT_DONE; | |
| nic_data->stats_pending = true; | |
| wmb(); /* ensure done flag is clear */ | |
| /* Initiate DMA transfer of stats */ | |
| EFX_POPULATE_OWORD_2(reg, | |
| FRF_AB_MAC_STAT_DMA_CMD, 1, | |
| FRF_AB_MAC_STAT_DMA_ADR, | |
| efx->stats_buffer.dma_addr); | |
| efx_writeo(efx, ®, FR_AB_MAC_STAT_DMA); | |
| mod_timer(&nic_data->stats_timer, round_jiffies_up(jiffies + HZ / 2)); | |
| } | |
| static void falcon_stats_complete(struct efx_nic *efx) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| if (!nic_data->stats_pending) | |
| return; | |
| nic_data->stats_pending = 0; | |
| if (*nic_data->stats_dma_done == FALCON_STATS_DONE) { | |
| rmb(); /* read the done flag before the stats */ | |
| efx->mac_op->update_stats(efx); | |
| } else { | |
| netif_err(efx, hw, efx->net_dev, | |
| "timed out waiting for statistics\n"); | |
| } | |
| } | |
| static void falcon_stats_timer_func(unsigned long context) | |
| { | |
| struct efx_nic *efx = (struct efx_nic *)context; | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| spin_lock(&efx->stats_lock); | |
| falcon_stats_complete(efx); | |
| if (nic_data->stats_disable_count == 0) | |
| falcon_stats_request(efx); | |
| spin_unlock(&efx->stats_lock); | |
| } | |
| static bool falcon_loopback_link_poll(struct efx_nic *efx) | |
| { | |
| struct efx_link_state old_state = efx->link_state; | |
| WARN_ON(!mutex_is_locked(&efx->mac_lock)); | |
| WARN_ON(!LOOPBACK_INTERNAL(efx)); | |
| efx->link_state.fd = true; | |
| efx->link_state.fc = efx->wanted_fc; | |
| efx->link_state.up = true; | |
| efx->link_state.speed = 10000; | |
| return !efx_link_state_equal(&efx->link_state, &old_state); | |
| } | |
| static int falcon_reconfigure_port(struct efx_nic *efx) | |
| { | |
| int rc; | |
| WARN_ON(efx_nic_rev(efx) > EFX_REV_FALCON_B0); | |
| /* Poll the PHY link state *before* reconfiguring it. This means we | |
| * will pick up the correct speed (in loopback) to select the correct | |
| * MAC. | |
| */ | |
| if (LOOPBACK_INTERNAL(efx)) | |
| falcon_loopback_link_poll(efx); | |
| else | |
| efx->phy_op->poll(efx); | |
| falcon_stop_nic_stats(efx); | |
| falcon_deconfigure_mac_wrapper(efx); | |
| falcon_reset_macs(efx); | |
| efx->phy_op->reconfigure(efx); | |
| rc = efx->mac_op->reconfigure(efx); | |
| BUG_ON(rc); | |
| falcon_start_nic_stats(efx); | |
| /* Synchronise efx->link_state with the kernel */ | |
| efx_link_status_changed(efx); | |
| return 0; | |
| } | |
| /************************************************************************** | |
| * | |
| * PHY access via GMII | |
| * | |
| ************************************************************************** | |
| */ | |
| /* Wait for GMII access to complete */ | |
| static int falcon_gmii_wait(struct efx_nic *efx) | |
| { | |
| efx_oword_t md_stat; | |
| int count; | |
| /* wait up to 50ms - taken max from datasheet */ | |
| for (count = 0; count < 5000; count++) { | |
| efx_reado(efx, &md_stat, FR_AB_MD_STAT); | |
| if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSY) == 0) { | |
| if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_LNFL) != 0 || | |
| EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSERR) != 0) { | |
| netif_err(efx, hw, efx->net_dev, | |
| "error from GMII access " | |
| EFX_OWORD_FMT"\n", | |
| EFX_OWORD_VAL(md_stat)); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| udelay(10); | |
| } | |
| netif_err(efx, hw, efx->net_dev, "timed out waiting for GMII\n"); | |
| return -ETIMEDOUT; | |
| } | |
| /* Write an MDIO register of a PHY connected to Falcon. */ | |
| static int falcon_mdio_write(struct net_device *net_dev, | |
| int prtad, int devad, u16 addr, u16 value) | |
| { | |
| struct efx_nic *efx = netdev_priv(net_dev); | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| efx_oword_t reg; | |
| int rc; | |
| netif_vdbg(efx, hw, efx->net_dev, | |
| "writing MDIO %d register %d.%d with 0x%04x\n", | |
| prtad, devad, addr, value); | |
| mutex_lock(&nic_data->mdio_lock); | |
| /* Check MDIO not currently being accessed */ | |
| rc = falcon_gmii_wait(efx); | |
| if (rc) | |
| goto out; | |
| /* Write the address/ID register */ | |
| EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr); | |
| efx_writeo(efx, ®, FR_AB_MD_PHY_ADR); | |
| EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad, | |
| FRF_AB_MD_DEV_ADR, devad); | |
| efx_writeo(efx, ®, FR_AB_MD_ID); | |
| /* Write data */ | |
| EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_TXD, value); | |
| efx_writeo(efx, ®, FR_AB_MD_TXD); | |
| EFX_POPULATE_OWORD_2(reg, | |
| FRF_AB_MD_WRC, 1, | |
| FRF_AB_MD_GC, 0); | |
| efx_writeo(efx, ®, FR_AB_MD_CS); | |
| /* Wait for data to be written */ | |
| rc = falcon_gmii_wait(efx); | |
| if (rc) { | |
| /* Abort the write operation */ | |
| EFX_POPULATE_OWORD_2(reg, | |
| FRF_AB_MD_WRC, 0, | |
| FRF_AB_MD_GC, 1); | |
| efx_writeo(efx, ®, FR_AB_MD_CS); | |
| udelay(10); | |
| } | |
| out: | |
| mutex_unlock(&nic_data->mdio_lock); | |
| return rc; | |
| } | |
| /* Read an MDIO register of a PHY connected to Falcon. */ | |
| static int falcon_mdio_read(struct net_device *net_dev, | |
| int prtad, int devad, u16 addr) | |
| { | |
| struct efx_nic *efx = netdev_priv(net_dev); | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| efx_oword_t reg; | |
| int rc; | |
| mutex_lock(&nic_data->mdio_lock); | |
| /* Check MDIO not currently being accessed */ | |
| rc = falcon_gmii_wait(efx); | |
| if (rc) | |
| goto out; | |
| EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr); | |
| efx_writeo(efx, ®, FR_AB_MD_PHY_ADR); | |
| EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad, | |
| FRF_AB_MD_DEV_ADR, devad); | |
| efx_writeo(efx, ®, FR_AB_MD_ID); | |
| /* Request data to be read */ | |
| EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_RDC, 1, FRF_AB_MD_GC, 0); | |
| efx_writeo(efx, ®, FR_AB_MD_CS); | |
| /* Wait for data to become available */ | |
| rc = falcon_gmii_wait(efx); | |
| if (rc == 0) { | |
| efx_reado(efx, ®, FR_AB_MD_RXD); | |
| rc = EFX_OWORD_FIELD(reg, FRF_AB_MD_RXD); | |
| netif_vdbg(efx, hw, efx->net_dev, | |
| "read from MDIO %d register %d.%d, got %04x\n", | |
| prtad, devad, addr, rc); | |
| } else { | |
| /* Abort the read operation */ | |
| EFX_POPULATE_OWORD_2(reg, | |
| FRF_AB_MD_RIC, 0, | |
| FRF_AB_MD_GC, 1); | |
| efx_writeo(efx, ®, FR_AB_MD_CS); | |
| netif_dbg(efx, hw, efx->net_dev, | |
| "read from MDIO %d register %d.%d, got error %d\n", | |
| prtad, devad, addr, rc); | |
| } | |
| out: | |
| mutex_unlock(&nic_data->mdio_lock); | |
| return rc; | |
| } | |
| /* This call is responsible for hooking in the MAC and PHY operations */ | |
| static int falcon_probe_port(struct efx_nic *efx) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| int rc; | |
| switch (efx->phy_type) { | |
| case PHY_TYPE_SFX7101: | |
| efx->phy_op = &falcon_sfx7101_phy_ops; | |
| break; | |
| case PHY_TYPE_QT2022C2: | |
| case PHY_TYPE_QT2025C: | |
| efx->phy_op = &falcon_qt202x_phy_ops; | |
| break; | |
| case PHY_TYPE_TXC43128: | |
| efx->phy_op = &falcon_txc_phy_ops; | |
| break; | |
| default: | |
| netif_err(efx, probe, efx->net_dev, "Unknown PHY type %d\n", | |
| efx->phy_type); | |
| return -ENODEV; | |
| } | |
| /* Fill out MDIO structure and loopback modes */ | |
| mutex_init(&nic_data->mdio_lock); | |
| efx->mdio.mdio_read = falcon_mdio_read; | |
| efx->mdio.mdio_write = falcon_mdio_write; | |
| rc = efx->phy_op->probe(efx); | |
| if (rc != 0) | |
| return rc; | |
| /* Initial assumption */ | |
| efx->link_state.speed = 10000; | |
| efx->link_state.fd = true; | |
| /* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */ | |
| if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) | |
| efx->wanted_fc = EFX_FC_RX | EFX_FC_TX; | |
| else | |
| efx->wanted_fc = EFX_FC_RX; | |
| if (efx->mdio.mmds & MDIO_DEVS_AN) | |
| efx->wanted_fc |= EFX_FC_AUTO; | |
| /* Allocate buffer for stats */ | |
| rc = efx_nic_alloc_buffer(efx, &efx->stats_buffer, | |
| FALCON_MAC_STATS_SIZE); | |
| if (rc) | |
| return rc; | |
| netif_dbg(efx, probe, efx->net_dev, | |
| "stats buffer at %llx (virt %p phys %llx)\n", | |
| (u64)efx->stats_buffer.dma_addr, | |
| efx->stats_buffer.addr, | |
| (u64)virt_to_phys(efx->stats_buffer.addr)); | |
| nic_data->stats_dma_done = efx->stats_buffer.addr + XgDmaDone_offset; | |
| return 0; | |
| } | |
| static void falcon_remove_port(struct efx_nic *efx) | |
| { | |
| efx->phy_op->remove(efx); | |
| efx_nic_free_buffer(efx, &efx->stats_buffer); | |
| } | |
| /* Global events are basically PHY events */ | |
| static bool | |
| falcon_handle_global_event(struct efx_channel *channel, efx_qword_t *event) | |
| { | |
| struct efx_nic *efx = channel->efx; | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| if (EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_G_PHY0_INTR) || | |
| EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_XG_PHY0_INTR) || | |
| EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_XFP_PHY0_INTR)) | |
| /* Ignored */ | |
| return true; | |
| if ((efx_nic_rev(efx) == EFX_REV_FALCON_B0) && | |
| EFX_QWORD_FIELD(*event, FSF_BB_GLB_EV_XG_MGT_INTR)) { | |
| nic_data->xmac_poll_required = true; | |
| return true; | |
| } | |
| if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1 ? | |
| EFX_QWORD_FIELD(*event, FSF_AA_GLB_EV_RX_RECOVERY) : | |
| EFX_QWORD_FIELD(*event, FSF_BB_GLB_EV_RX_RECOVERY)) { | |
| netif_err(efx, rx_err, efx->net_dev, | |
| "channel %d seen global RX_RESET event. Resetting.\n", | |
| channel->channel); | |
| atomic_inc(&efx->rx_reset); | |
| efx_schedule_reset(efx, EFX_WORKAROUND_6555(efx) ? | |
| RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE); | |
| return true; | |
| } | |
| return false; | |
| } | |
| /************************************************************************** | |
| * | |
| * Falcon test code | |
| * | |
| **************************************************************************/ | |
| static int | |
| falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| struct falcon_nvconfig *nvconfig; | |
| struct efx_spi_device *spi; | |
| void *region; | |
| int rc, magic_num, struct_ver; | |
| __le16 *word, *limit; | |
| u32 csum; | |
| if (efx_spi_present(&nic_data->spi_flash)) | |
| spi = &nic_data->spi_flash; | |
| else if (efx_spi_present(&nic_data->spi_eeprom)) | |
| spi = &nic_data->spi_eeprom; | |
| else | |
| return -EINVAL; | |
| region = kmalloc(FALCON_NVCONFIG_END, GFP_KERNEL); | |
| if (!region) | |
| return -ENOMEM; | |
| nvconfig = region + FALCON_NVCONFIG_OFFSET; | |
| mutex_lock(&nic_data->spi_lock); | |
| rc = falcon_spi_read(efx, spi, 0, FALCON_NVCONFIG_END, NULL, region); | |
| mutex_unlock(&nic_data->spi_lock); | |
| if (rc) { | |
| netif_err(efx, hw, efx->net_dev, "Failed to read %s\n", | |
| efx_spi_present(&nic_data->spi_flash) ? | |
| "flash" : "EEPROM"); | |
| rc = -EIO; | |
| goto out; | |
| } | |
| magic_num = le16_to_cpu(nvconfig->board_magic_num); | |
| struct_ver = le16_to_cpu(nvconfig->board_struct_ver); | |
| rc = -EINVAL; | |
| if (magic_num != FALCON_NVCONFIG_BOARD_MAGIC_NUM) { | |
| netif_err(efx, hw, efx->net_dev, | |
| "NVRAM bad magic 0x%x\n", magic_num); | |
| goto out; | |
| } | |
| if (struct_ver < 2) { | |
| netif_err(efx, hw, efx->net_dev, | |
| "NVRAM has ancient version 0x%x\n", struct_ver); | |
| goto out; | |
| } else if (struct_ver < 4) { | |
| word = &nvconfig->board_magic_num; | |
| limit = (__le16 *) (nvconfig + 1); | |
| } else { | |
| word = region; | |
| limit = region + FALCON_NVCONFIG_END; | |
| } | |
| for (csum = 0; word < limit; ++word) | |
| csum += le16_to_cpu(*word); | |
| if (~csum & 0xffff) { | |
| netif_err(efx, hw, efx->net_dev, | |
| "NVRAM has incorrect checksum\n"); | |
| goto out; | |
| } | |
| rc = 0; | |
| if (nvconfig_out) | |
| memcpy(nvconfig_out, nvconfig, sizeof(*nvconfig)); | |
| out: | |
| kfree(region); | |
| return rc; | |
| } | |
| static int falcon_test_nvram(struct efx_nic *efx) | |
| { | |
| return falcon_read_nvram(efx, NULL); | |
| } | |
| static const struct efx_nic_register_test falcon_b0_register_tests[] = { | |
| { FR_AZ_ADR_REGION, | |
| EFX_OWORD32(0x0003FFFF, 0x0003FFFF, 0x0003FFFF, 0x0003FFFF) }, | |
| { FR_AZ_RX_CFG, | |
| EFX_OWORD32(0xFFFFFFFE, 0x00017FFF, 0x00000000, 0x00000000) }, | |
| { FR_AZ_TX_CFG, | |
| EFX_OWORD32(0x7FFF0037, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AZ_TX_RESERVED, | |
| EFX_OWORD32(0xFFFEFE80, 0x1FFFFFFF, 0x020000FE, 0x007FFFFF) }, | |
| { FR_AB_MAC_CTRL, | |
| EFX_OWORD32(0xFFFF0000, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AZ_SRM_TX_DC_CFG, | |
| EFX_OWORD32(0x001FFFFF, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AZ_RX_DC_CFG, | |
| EFX_OWORD32(0x0000000F, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AZ_RX_DC_PF_WM, | |
| EFX_OWORD32(0x000003FF, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_BZ_DP_CTRL, | |
| EFX_OWORD32(0x00000FFF, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AB_GM_CFG2, | |
| EFX_OWORD32(0x00007337, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AB_GMF_CFG0, | |
| EFX_OWORD32(0x00001F1F, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AB_XM_GLB_CFG, | |
| EFX_OWORD32(0x00000C68, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AB_XM_TX_CFG, | |
| EFX_OWORD32(0x00080164, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AB_XM_RX_CFG, | |
| EFX_OWORD32(0x07100A0C, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AB_XM_RX_PARAM, | |
| EFX_OWORD32(0x00001FF8, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AB_XM_FC, | |
| EFX_OWORD32(0xFFFF0001, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AB_XM_ADR_LO, | |
| EFX_OWORD32(0xFFFFFFFF, 0x00000000, 0x00000000, 0x00000000) }, | |
| { FR_AB_XX_SD_CTL, | |
| EFX_OWORD32(0x0003FF0F, 0x00000000, 0x00000000, 0x00000000) }, | |
| }; | |
| static int falcon_b0_test_registers(struct efx_nic *efx) | |
| { | |
| return efx_nic_test_registers(efx, falcon_b0_register_tests, | |
| ARRAY_SIZE(falcon_b0_register_tests)); | |
| } | |
| /************************************************************************** | |
| * | |
| * Device reset | |
| * | |
| ************************************************************************** | |
| */ | |
| /* Resets NIC to known state. This routine must be called in process | |
| * context and is allowed to sleep. */ | |
| static int __falcon_reset_hw(struct efx_nic *efx, enum reset_type method) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| efx_oword_t glb_ctl_reg_ker; | |
| int rc; | |
| netif_dbg(efx, hw, efx->net_dev, "performing %s hardware reset\n", | |
| RESET_TYPE(method)); | |
| /* Initiate device reset */ | |
| if (method == RESET_TYPE_WORLD) { | |
| rc = pci_save_state(efx->pci_dev); | |
| if (rc) { | |
| netif_err(efx, drv, efx->net_dev, | |
| "failed to backup PCI state of primary " | |
| "function prior to hardware reset\n"); | |
| goto fail1; | |
| } | |
| if (efx_nic_is_dual_func(efx)) { | |
| rc = pci_save_state(nic_data->pci_dev2); | |
| if (rc) { | |
| netif_err(efx, drv, efx->net_dev, | |
| "failed to backup PCI state of " | |
| "secondary function prior to " | |
| "hardware reset\n"); | |
| goto fail2; | |
| } | |
| } | |
| EFX_POPULATE_OWORD_2(glb_ctl_reg_ker, | |
| FRF_AB_EXT_PHY_RST_DUR, | |
| FFE_AB_EXT_PHY_RST_DUR_10240US, | |
| FRF_AB_SWRST, 1); | |
| } else { | |
| EFX_POPULATE_OWORD_7(glb_ctl_reg_ker, | |
| /* exclude PHY from "invisible" reset */ | |
| FRF_AB_EXT_PHY_RST_CTL, | |
| method == RESET_TYPE_INVISIBLE, | |
| /* exclude EEPROM/flash and PCIe */ | |
| FRF_AB_PCIE_CORE_RST_CTL, 1, | |
| FRF_AB_PCIE_NSTKY_RST_CTL, 1, | |
| FRF_AB_PCIE_SD_RST_CTL, 1, | |
| FRF_AB_EE_RST_CTL, 1, | |
| FRF_AB_EXT_PHY_RST_DUR, | |
| FFE_AB_EXT_PHY_RST_DUR_10240US, | |
| FRF_AB_SWRST, 1); | |
| } | |
| efx_writeo(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL); | |
| netif_dbg(efx, hw, efx->net_dev, "waiting for hardware reset\n"); | |
| schedule_timeout_uninterruptible(HZ / 20); | |
| /* Restore PCI configuration if needed */ | |
| if (method == RESET_TYPE_WORLD) { | |
| if (efx_nic_is_dual_func(efx)) | |
| pci_restore_state(nic_data->pci_dev2); | |
| pci_restore_state(efx->pci_dev); | |
| netif_dbg(efx, drv, efx->net_dev, | |
| "successfully restored PCI config\n"); | |
| } | |
| /* Assert that reset complete */ | |
| efx_reado(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL); | |
| if (EFX_OWORD_FIELD(glb_ctl_reg_ker, FRF_AB_SWRST) != 0) { | |
| rc = -ETIMEDOUT; | |
| netif_err(efx, hw, efx->net_dev, | |
| "timed out waiting for hardware reset\n"); | |
| goto fail3; | |
| } | |
| netif_dbg(efx, hw, efx->net_dev, "hardware reset complete\n"); | |
| return 0; | |
| /* pci_save_state() and pci_restore_state() MUST be called in pairs */ | |
| fail2: | |
| pci_restore_state(efx->pci_dev); | |
| fail1: | |
| fail3: | |
| return rc; | |
| } | |
| static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| int rc; | |
| mutex_lock(&nic_data->spi_lock); | |
| rc = __falcon_reset_hw(efx, method); | |
| mutex_unlock(&nic_data->spi_lock); | |
| return rc; | |
| } | |
| static void falcon_monitor(struct efx_nic *efx) | |
| { | |
| bool link_changed; | |
| int rc; | |
| BUG_ON(!mutex_is_locked(&efx->mac_lock)); | |
| rc = falcon_board(efx)->type->monitor(efx); | |
| if (rc) { | |
| netif_err(efx, hw, efx->net_dev, | |
| "Board sensor %s; shutting down PHY\n", | |
| (rc == -ERANGE) ? "reported fault" : "failed"); | |
| efx->phy_mode |= PHY_MODE_LOW_POWER; | |
| rc = __efx_reconfigure_port(efx); | |
| WARN_ON(rc); | |
| } | |
| if (LOOPBACK_INTERNAL(efx)) | |
| link_changed = falcon_loopback_link_poll(efx); | |
| else | |
| link_changed = efx->phy_op->poll(efx); | |
| if (link_changed) { | |
| falcon_stop_nic_stats(efx); | |
| falcon_deconfigure_mac_wrapper(efx); | |
| falcon_reset_macs(efx); | |
| rc = efx->mac_op->reconfigure(efx); | |
| BUG_ON(rc); | |
| falcon_start_nic_stats(efx); | |
| efx_link_status_changed(efx); | |
| } | |
| falcon_poll_xmac(efx); | |
| } | |
| /* Zeroes out the SRAM contents. This routine must be called in | |
| * process context and is allowed to sleep. | |
| */ | |
| static int falcon_reset_sram(struct efx_nic *efx) | |
| { | |
| efx_oword_t srm_cfg_reg_ker, gpio_cfg_reg_ker; | |
| int count; | |
| /* Set the SRAM wake/sleep GPIO appropriately. */ | |
| efx_reado(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL); | |
| EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OEN, 1); | |
| EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OUT, 1); | |
| efx_writeo(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL); | |
| /* Initiate SRAM reset */ | |
| EFX_POPULATE_OWORD_2(srm_cfg_reg_ker, | |
| FRF_AZ_SRM_INIT_EN, 1, | |
| FRF_AZ_SRM_NB_SZ, 0); | |
| efx_writeo(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG); | |
| /* Wait for SRAM reset to complete */ | |
| count = 0; | |
| do { | |
| netif_dbg(efx, hw, efx->net_dev, | |
| "waiting for SRAM reset (attempt %d)...\n", count); | |
| /* SRAM reset is slow; expect around 16ms */ | |
| schedule_timeout_uninterruptible(HZ / 50); | |
| /* Check for reset complete */ | |
| efx_reado(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG); | |
| if (!EFX_OWORD_FIELD(srm_cfg_reg_ker, FRF_AZ_SRM_INIT_EN)) { | |
| netif_dbg(efx, hw, efx->net_dev, | |
| "SRAM reset complete\n"); | |
| return 0; | |
| } | |
| } while (++count < 20); /* wait up to 0.4 sec */ | |
| netif_err(efx, hw, efx->net_dev, "timed out waiting for SRAM reset\n"); | |
| return -ETIMEDOUT; | |
| } | |
| static void falcon_spi_device_init(struct efx_nic *efx, | |
| struct efx_spi_device *spi_device, | |
| unsigned int device_id, u32 device_type) | |
| { | |
| if (device_type != 0) { | |
| spi_device->device_id = device_id; | |
| spi_device->size = | |
| 1 << SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_SIZE); | |
| spi_device->addr_len = | |
| SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ADDR_LEN); | |
| spi_device->munge_address = (spi_device->size == 1 << 9 && | |
| spi_device->addr_len == 1); | |
| spi_device->erase_command = | |
| SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ERASE_CMD); | |
| spi_device->erase_size = | |
| 1 << SPI_DEV_TYPE_FIELD(device_type, | |
| SPI_DEV_TYPE_ERASE_SIZE); | |
| spi_device->block_size = | |
| 1 << SPI_DEV_TYPE_FIELD(device_type, | |
| SPI_DEV_TYPE_BLOCK_SIZE); | |
| } else { | |
| spi_device->size = 0; | |
| } | |
| } | |
| /* Extract non-volatile configuration */ | |
| static int falcon_probe_nvconfig(struct efx_nic *efx) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| struct falcon_nvconfig *nvconfig; | |
| int rc; | |
| nvconfig = kmalloc(sizeof(*nvconfig), GFP_KERNEL); | |
| if (!nvconfig) | |
| return -ENOMEM; | |
| rc = falcon_read_nvram(efx, nvconfig); | |
| if (rc) | |
| goto out; | |
| efx->phy_type = nvconfig->board_v2.port0_phy_type; | |
| efx->mdio.prtad = nvconfig->board_v2.port0_phy_addr; | |
| if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) { | |
| falcon_spi_device_init( | |
| efx, &nic_data->spi_flash, FFE_AB_SPI_DEVICE_FLASH, | |
| le32_to_cpu(nvconfig->board_v3 | |
| .spi_device_type[FFE_AB_SPI_DEVICE_FLASH])); | |
| falcon_spi_device_init( | |
| efx, &nic_data->spi_eeprom, FFE_AB_SPI_DEVICE_EEPROM, | |
| le32_to_cpu(nvconfig->board_v3 | |
| .spi_device_type[FFE_AB_SPI_DEVICE_EEPROM])); | |
| } | |
| /* Read the MAC addresses */ | |
| memcpy(efx->net_dev->perm_addr, nvconfig->mac_address[0], ETH_ALEN); | |
| netif_dbg(efx, probe, efx->net_dev, "PHY is %d phy_id %d\n", | |
| efx->phy_type, efx->mdio.prtad); | |
| rc = falcon_probe_board(efx, | |
| le16_to_cpu(nvconfig->board_v2.board_revision)); | |
| out: | |
| kfree(nvconfig); | |
| return rc; | |
| } | |
| /* Probe all SPI devices on the NIC */ | |
| static void falcon_probe_spi_devices(struct efx_nic *efx) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| efx_oword_t nic_stat, gpio_ctl, ee_vpd_cfg; | |
| int boot_dev; | |
| efx_reado(efx, &gpio_ctl, FR_AB_GPIO_CTL); | |
| efx_reado(efx, &nic_stat, FR_AB_NIC_STAT); | |
| efx_reado(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0); | |
| if (EFX_OWORD_FIELD(gpio_ctl, FRF_AB_GPIO3_PWRUP_VALUE)) { | |
| boot_dev = (EFX_OWORD_FIELD(nic_stat, FRF_AB_SF_PRST) ? | |
| FFE_AB_SPI_DEVICE_FLASH : FFE_AB_SPI_DEVICE_EEPROM); | |
| netif_dbg(efx, probe, efx->net_dev, "Booted from %s\n", | |
| boot_dev == FFE_AB_SPI_DEVICE_FLASH ? | |
| "flash" : "EEPROM"); | |
| } else { | |
| /* Disable VPD and set clock dividers to safe | |
| * values for initial programming. */ | |
| boot_dev = -1; | |
| netif_dbg(efx, probe, efx->net_dev, | |
| "Booted from internal ASIC settings;" | |
| " setting SPI config\n"); | |
| EFX_POPULATE_OWORD_3(ee_vpd_cfg, FRF_AB_EE_VPD_EN, 0, | |
| /* 125 MHz / 7 ~= 20 MHz */ | |
| FRF_AB_EE_SF_CLOCK_DIV, 7, | |
| /* 125 MHz / 63 ~= 2 MHz */ | |
| FRF_AB_EE_EE_CLOCK_DIV, 63); | |
| efx_writeo(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0); | |
| } | |
| mutex_init(&nic_data->spi_lock); | |
| if (boot_dev == FFE_AB_SPI_DEVICE_FLASH) | |
| falcon_spi_device_init(efx, &nic_data->spi_flash, | |
| FFE_AB_SPI_DEVICE_FLASH, | |
| default_flash_type); | |
| if (boot_dev == FFE_AB_SPI_DEVICE_EEPROM) | |
| falcon_spi_device_init(efx, &nic_data->spi_eeprom, | |
| FFE_AB_SPI_DEVICE_EEPROM, | |
| large_eeprom_type); | |
| } | |
| static int falcon_probe_nic(struct efx_nic *efx) | |
| { | |
| struct falcon_nic_data *nic_data; | |
| struct falcon_board *board; | |
| int rc; | |
| /* Allocate storage for hardware specific data */ | |
| nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL); | |
| if (!nic_data) | |
| return -ENOMEM; | |
| efx->nic_data = nic_data; | |
| rc = -ENODEV; | |
| if (efx_nic_fpga_ver(efx) != 0) { | |
| netif_err(efx, probe, efx->net_dev, | |
| "Falcon FPGA not supported\n"); | |
| goto fail1; | |
| } | |
| if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) { | |
| efx_oword_t nic_stat; | |
| struct pci_dev *dev; | |
| u8 pci_rev = efx->pci_dev->revision; | |
| if ((pci_rev == 0xff) || (pci_rev == 0)) { | |
| netif_err(efx, probe, efx->net_dev, | |
| "Falcon rev A0 not supported\n"); | |
| goto fail1; | |
| } | |
| efx_reado(efx, &nic_stat, FR_AB_NIC_STAT); | |
| if (EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_10G) == 0) { | |
| netif_err(efx, probe, efx->net_dev, | |
| "Falcon rev A1 1G not supported\n"); | |
| goto fail1; | |
| } | |
| if (EFX_OWORD_FIELD(nic_stat, FRF_AA_STRAP_PCIE) == 0) { | |
| netif_err(efx, probe, efx->net_dev, | |
| "Falcon rev A1 PCI-X not supported\n"); | |
| goto fail1; | |
| } | |
| dev = pci_dev_get(efx->pci_dev); | |
| while ((dev = pci_get_device(EFX_VENDID_SFC, FALCON_A_S_DEVID, | |
| dev))) { | |
| if (dev->bus == efx->pci_dev->bus && | |
| dev->devfn == efx->pci_dev->devfn + 1) { | |
| nic_data->pci_dev2 = dev; | |
| break; | |
| } | |
| } | |
| if (!nic_data->pci_dev2) { | |
| netif_err(efx, probe, efx->net_dev, | |
| "failed to find secondary function\n"); | |
| rc = -ENODEV; | |
| goto fail2; | |
| } | |
| } | |
| /* Now we can reset the NIC */ | |
| rc = __falcon_reset_hw(efx, RESET_TYPE_ALL); | |
| if (rc) { | |
| netif_err(efx, probe, efx->net_dev, "failed to reset NIC\n"); | |
| goto fail3; | |
| } | |
| /* Allocate memory for INT_KER */ | |
| rc = efx_nic_alloc_buffer(efx, &efx->irq_status, sizeof(efx_oword_t)); | |
| if (rc) | |
| goto fail4; | |
| BUG_ON(efx->irq_status.dma_addr & 0x0f); | |
| netif_dbg(efx, probe, efx->net_dev, | |
| "INT_KER at %llx (virt %p phys %llx)\n", | |
| (u64)efx->irq_status.dma_addr, | |
| efx->irq_status.addr, | |
| (u64)virt_to_phys(efx->irq_status.addr)); | |
| falcon_probe_spi_devices(efx); | |
| /* Read in the non-volatile configuration */ | |
| rc = falcon_probe_nvconfig(efx); | |
| if (rc) { | |
| if (rc == -EINVAL) | |
| netif_err(efx, probe, efx->net_dev, "NVRAM is invalid\n"); | |
| goto fail5; | |
| } | |
| /* Initialise I2C adapter */ | |
| board = falcon_board(efx); | |
| board->i2c_adap.owner = THIS_MODULE; | |
| board->i2c_data = falcon_i2c_bit_operations; | |
| board->i2c_data.data = efx; | |
| board->i2c_adap.algo_data = &board->i2c_data; | |
| board->i2c_adap.dev.parent = &efx->pci_dev->dev; | |
| strlcpy(board->i2c_adap.name, "SFC4000 GPIO", | |
| sizeof(board->i2c_adap.name)); | |
| rc = i2c_bit_add_bus(&board->i2c_adap); | |
| if (rc) | |
| goto fail5; | |
| rc = falcon_board(efx)->type->init(efx); | |
| if (rc) { | |
| netif_err(efx, probe, efx->net_dev, | |
| "failed to initialise board\n"); | |
| goto fail6; | |
| } | |
| nic_data->stats_disable_count = 1; | |
| setup_timer(&nic_data->stats_timer, &falcon_stats_timer_func, | |
| (unsigned long)efx); | |
| return 0; | |
| fail6: | |
| BUG_ON(i2c_del_adapter(&board->i2c_adap)); | |
| memset(&board->i2c_adap, 0, sizeof(board->i2c_adap)); | |
| fail5: | |
| efx_nic_free_buffer(efx, &efx->irq_status); | |
| fail4: | |
| fail3: | |
| if (nic_data->pci_dev2) { | |
| pci_dev_put(nic_data->pci_dev2); | |
| nic_data->pci_dev2 = NULL; | |
| } | |
| fail2: | |
| fail1: | |
| kfree(efx->nic_data); | |
| return rc; | |
| } | |
| static void falcon_init_rx_cfg(struct efx_nic *efx) | |
| { | |
| /* Prior to Siena the RX DMA engine will split each frame at | |
| * intervals of RX_USR_BUF_SIZE (32-byte units). We set it to | |
| * be so large that that never happens. */ | |
| const unsigned huge_buf_size = (3 * 4096) >> 5; | |
| /* RX control FIFO thresholds (32 entries) */ | |
| const unsigned ctrl_xon_thr = 20; | |
| const unsigned ctrl_xoff_thr = 25; | |
| efx_oword_t reg; | |
| efx_reado(efx, ®, FR_AZ_RX_CFG); | |
| if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) { | |
| /* Data FIFO size is 5.5K */ | |
| EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_DESC_PUSH_EN, 0); | |
| EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_USR_BUF_SIZE, | |
| huge_buf_size); | |
| EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_MAC_TH, 512 >> 8); | |
| EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_MAC_TH, 2048 >> 8); | |
| EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_TX_TH, ctrl_xon_thr); | |
| EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_TX_TH, ctrl_xoff_thr); | |
| } else { | |
| /* Data FIFO size is 80K; register fields moved */ | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_DESC_PUSH_EN, 0); | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_USR_BUF_SIZE, | |
| huge_buf_size); | |
| /* Send XON and XOFF at ~3 * max MTU away from empty/full */ | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_MAC_TH, 27648 >> 8); | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_MAC_TH, 54272 >> 8); | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_TX_TH, ctrl_xon_thr); | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_TX_TH, ctrl_xoff_thr); | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1); | |
| /* Enable hash insertion. This is broken for the | |
| * 'Falcon' hash so also select Toeplitz TCP/IPv4 and | |
| * IPv4 hashes. */ | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_HASH_INSRT_HDR, 1); | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_HASH_ALG, 1); | |
| EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_IP_HASH, 1); | |
| } | |
| /* Always enable XOFF signal from RX FIFO. We enable | |
| * or disable transmission of pause frames at the MAC. */ | |
| EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1); | |
| efx_writeo(efx, ®, FR_AZ_RX_CFG); | |
| } | |
| /* This call performs hardware-specific global initialisation, such as | |
| * defining the descriptor cache sizes and number of RSS channels. | |
| * It does not set up any buffers, descriptor rings or event queues. | |
| */ | |
| static int falcon_init_nic(struct efx_nic *efx) | |
| { | |
| efx_oword_t temp; | |
| int rc; | |
| /* Use on-chip SRAM */ | |
| efx_reado(efx, &temp, FR_AB_NIC_STAT); | |
| EFX_SET_OWORD_FIELD(temp, FRF_AB_ONCHIP_SRAM, 1); | |
| efx_writeo(efx, &temp, FR_AB_NIC_STAT); | |
| rc = falcon_reset_sram(efx); | |
| if (rc) | |
| return rc; | |
| /* Clear the parity enables on the TX data fifos as | |
| * they produce false parity errors because of timing issues | |
| */ | |
| if (EFX_WORKAROUND_5129(efx)) { | |
| efx_reado(efx, &temp, FR_AZ_CSR_SPARE); | |
| EFX_SET_OWORD_FIELD(temp, FRF_AB_MEM_PERR_EN_TX_DATA, 0); | |
| efx_writeo(efx, &temp, FR_AZ_CSR_SPARE); | |
| } | |
| if (EFX_WORKAROUND_7244(efx)) { | |
| efx_reado(efx, &temp, FR_BZ_RX_FILTER_CTL); | |
| EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_FULL_SRCH_LIMIT, 8); | |
| EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_WILD_SRCH_LIMIT, 8); | |
| EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_FULL_SRCH_LIMIT, 8); | |
| EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_WILD_SRCH_LIMIT, 8); | |
| efx_writeo(efx, &temp, FR_BZ_RX_FILTER_CTL); | |
| } | |
| /* XXX This is documented only for Falcon A0/A1 */ | |
| /* Setup RX. Wait for descriptor is broken and must | |
| * be disabled. RXDP recovery shouldn't be needed, but is. | |
| */ | |
| efx_reado(efx, &temp, FR_AA_RX_SELF_RST); | |
| EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_NODESC_WAIT_DIS, 1); | |
| EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_SELF_RST_EN, 1); | |
| if (EFX_WORKAROUND_5583(efx)) | |
| EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_ISCSI_DIS, 1); | |
| efx_writeo(efx, &temp, FR_AA_RX_SELF_RST); | |
| /* Do not enable TX_NO_EOP_DISC_EN, since it limits packets to 16 | |
| * descriptors (which is bad). | |
| */ | |
| efx_reado(efx, &temp, FR_AZ_TX_CFG); | |
| EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_NO_EOP_DISC_EN, 0); | |
| efx_writeo(efx, &temp, FR_AZ_TX_CFG); | |
| falcon_init_rx_cfg(efx); | |
| if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) { | |
| /* Set hash key for IPv4 */ | |
| memcpy(&temp, efx->rx_hash_key, sizeof(temp)); | |
| efx_writeo(efx, &temp, FR_BZ_RX_RSS_TKEY); | |
| /* Set destination of both TX and RX Flush events */ | |
| EFX_POPULATE_OWORD_1(temp, FRF_BZ_FLS_EVQ_ID, 0); | |
| efx_writeo(efx, &temp, FR_BZ_DP_CTRL); | |
| } | |
| efx_nic_init_common(efx); | |
| return 0; | |
| } | |
| static void falcon_remove_nic(struct efx_nic *efx) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| struct falcon_board *board = falcon_board(efx); | |
| int rc; | |
| board->type->fini(efx); | |
| /* Remove I2C adapter and clear it in preparation for a retry */ | |
| rc = i2c_del_adapter(&board->i2c_adap); | |
| BUG_ON(rc); | |
| memset(&board->i2c_adap, 0, sizeof(board->i2c_adap)); | |
| efx_nic_free_buffer(efx, &efx->irq_status); | |
| __falcon_reset_hw(efx, RESET_TYPE_ALL); | |
| /* Release the second function after the reset */ | |
| if (nic_data->pci_dev2) { | |
| pci_dev_put(nic_data->pci_dev2); | |
| nic_data->pci_dev2 = NULL; | |
| } | |
| /* Tear down the private nic state */ | |
| kfree(efx->nic_data); | |
| efx->nic_data = NULL; | |
| } | |
| static void falcon_update_nic_stats(struct efx_nic *efx) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| efx_oword_t cnt; | |
| if (nic_data->stats_disable_count) | |
| return; | |
| efx_reado(efx, &cnt, FR_AZ_RX_NODESC_DROP); | |
| efx->n_rx_nodesc_drop_cnt += | |
| EFX_OWORD_FIELD(cnt, FRF_AB_RX_NODESC_DROP_CNT); | |
| if (nic_data->stats_pending && | |
| *nic_data->stats_dma_done == FALCON_STATS_DONE) { | |
| nic_data->stats_pending = false; | |
| rmb(); /* read the done flag before the stats */ | |
| efx->mac_op->update_stats(efx); | |
| } | |
| } | |
| void falcon_start_nic_stats(struct efx_nic *efx) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| spin_lock_bh(&efx->stats_lock); | |
| if (--nic_data->stats_disable_count == 0) | |
| falcon_stats_request(efx); | |
| spin_unlock_bh(&efx->stats_lock); | |
| } | |
| void falcon_stop_nic_stats(struct efx_nic *efx) | |
| { | |
| struct falcon_nic_data *nic_data = efx->nic_data; | |
| int i; | |
| might_sleep(); | |
| spin_lock_bh(&efx->stats_lock); | |
| ++nic_data->stats_disable_count; | |
| spin_unlock_bh(&efx->stats_lock); | |
| del_timer_sync(&nic_data->stats_timer); | |
| /* Wait enough time for the most recent transfer to | |
| * complete. */ | |
| for (i = 0; i < 4 && nic_data->stats_pending; i++) { | |
| if (*nic_data->stats_dma_done == FALCON_STATS_DONE) | |
| break; | |
| msleep(1); | |
| } | |
| spin_lock_bh(&efx->stats_lock); | |
| falcon_stats_complete(efx); | |
| spin_unlock_bh(&efx->stats_lock); | |
| } | |
| static void falcon_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) | |
| { | |
| falcon_board(efx)->type->set_id_led(efx, mode); | |
| } | |
| /************************************************************************** | |
| * | |
| * Wake on LAN | |
| * | |
| ************************************************************************** | |
| */ | |
| static void falcon_get_wol(struct efx_nic *efx, struct ethtool_wolinfo *wol) | |
| { | |
| wol->supported = 0; | |
| wol->wolopts = 0; | |
| memset(&wol->sopass, 0, sizeof(wol->sopass)); | |
| } | |
| static int falcon_set_wol(struct efx_nic *efx, u32 type) | |
| { | |
| if (type != 0) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| /************************************************************************** | |
| * | |
| * Revision-dependent attributes used by efx.c and nic.c | |
| * | |
| ************************************************************************** | |
| */ | |
| const struct efx_nic_type falcon_a1_nic_type = { | |
| .probe = falcon_probe_nic, | |
| .remove = falcon_remove_nic, | |
| .init = falcon_init_nic, | |
| .fini = efx_port_dummy_op_void, | |
| .monitor = falcon_monitor, | |
| .reset = falcon_reset_hw, | |
| .probe_port = falcon_probe_port, | |
| .remove_port = falcon_remove_port, | |
| .handle_global_event = falcon_handle_global_event, | |
| .prepare_flush = falcon_prepare_flush, | |
| .finish_flush = efx_port_dummy_op_void, | |
| .update_stats = falcon_update_nic_stats, | |
| .start_stats = falcon_start_nic_stats, | |
| .stop_stats = falcon_stop_nic_stats, | |
| .set_id_led = falcon_set_id_led, | |
| .push_irq_moderation = falcon_push_irq_moderation, | |
| .push_multicast_hash = falcon_push_multicast_hash, | |
| .reconfigure_port = falcon_reconfigure_port, | |
| .get_wol = falcon_get_wol, | |
| .set_wol = falcon_set_wol, | |
| .resume_wol = efx_port_dummy_op_void, | |
| .test_nvram = falcon_test_nvram, | |
| .default_mac_ops = &falcon_xmac_operations, | |
| .revision = EFX_REV_FALCON_A1, | |
| .mem_map_size = 0x20000, | |
| .txd_ptr_tbl_base = FR_AA_TX_DESC_PTR_TBL_KER, | |
| .rxd_ptr_tbl_base = FR_AA_RX_DESC_PTR_TBL_KER, | |
| .buf_tbl_base = FR_AA_BUF_FULL_TBL_KER, | |
| .evq_ptr_tbl_base = FR_AA_EVQ_PTR_TBL_KER, | |
| .evq_rptr_tbl_base = FR_AA_EVQ_RPTR_KER, | |
| .max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH), | |
| .rx_buffer_padding = 0x24, | |
| .max_interrupt_mode = EFX_INT_MODE_MSI, | |
| .phys_addr_channels = 4, | |
| .tx_dc_base = 0x130000, | |
| .rx_dc_base = 0x100000, | |
| .offload_features = NETIF_F_IP_CSUM, | |
| .reset_world_flags = ETH_RESET_IRQ, | |
| }; | |
| const struct efx_nic_type falcon_b0_nic_type = { | |
| .probe = falcon_probe_nic, | |
| .remove = falcon_remove_nic, | |
| .init = falcon_init_nic, | |
| .fini = efx_port_dummy_op_void, | |
| .monitor = falcon_monitor, | |
| .reset = falcon_reset_hw, | |
| .probe_port = falcon_probe_port, | |
| .remove_port = falcon_remove_port, | |
| .handle_global_event = falcon_handle_global_event, | |
| .prepare_flush = falcon_prepare_flush, | |
| .finish_flush = efx_port_dummy_op_void, | |
| .update_stats = falcon_update_nic_stats, | |
| .start_stats = falcon_start_nic_stats, | |
| .stop_stats = falcon_stop_nic_stats, | |
| .set_id_led = falcon_set_id_led, | |
| .push_irq_moderation = falcon_push_irq_moderation, | |
| .push_multicast_hash = falcon_push_multicast_hash, | |
| .reconfigure_port = falcon_reconfigure_port, | |
| .get_wol = falcon_get_wol, | |
| .set_wol = falcon_set_wol, | |
| .resume_wol = efx_port_dummy_op_void, | |
| .test_registers = falcon_b0_test_registers, | |
| .test_nvram = falcon_test_nvram, | |
| .default_mac_ops = &falcon_xmac_operations, | |
| .revision = EFX_REV_FALCON_B0, | |
| /* Map everything up to and including the RSS indirection | |
| * table. Don't map MSI-X table, MSI-X PBA since Linux | |
| * requires that they not be mapped. */ | |
| .mem_map_size = (FR_BZ_RX_INDIRECTION_TBL + | |
| FR_BZ_RX_INDIRECTION_TBL_STEP * | |
| FR_BZ_RX_INDIRECTION_TBL_ROWS), | |
| .txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL, | |
| .rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL, | |
| .buf_tbl_base = FR_BZ_BUF_FULL_TBL, | |
| .evq_ptr_tbl_base = FR_BZ_EVQ_PTR_TBL, | |
| .evq_rptr_tbl_base = FR_BZ_EVQ_RPTR, | |
| .max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH), | |
| .rx_buffer_hash_size = 0x10, | |
| .rx_buffer_padding = 0, | |
| .max_interrupt_mode = EFX_INT_MODE_MSIX, | |
| .phys_addr_channels = 32, /* Hardware limit is 64, but the legacy | |
| * interrupt handler only supports 32 | |
| * channels */ | |
| .tx_dc_base = 0x130000, | |
| .rx_dc_base = 0x100000, | |
| .offload_features = NETIF_F_IP_CSUM | NETIF_F_RXHASH | NETIF_F_NTUPLE, | |
| .reset_world_flags = ETH_RESET_IRQ, | |
| }; | |