| /****************************************************************************** | |
| * | |
| * (C)Copyright 1998,1999 SysKonnect, | |
| * a business unit of Schneider & Koch & Co. Datensysteme GmbH. | |
| * | |
| * See the file "skfddi.c" for further information. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * The information in this file is provided "AS IS" without warranty. | |
| * | |
| ******************************************************************************/ | |
| /* | |
| * ******************************************************************* | |
| * This SBA code implements the Synchronous Bandwidth Allocation | |
| * functions described in the "FDDI Synchronous Forum Implementer's | |
| * Agreement" dated December 1th, 1993. | |
| * ******************************************************************* | |
| * | |
| * PURPOSE: The purpose of this function is to control | |
| * synchronous allocations on a single FDDI segment. | |
| * Allocations are limited to the primary FDDI ring. | |
| * The SBM provides recovery mechanisms to recover | |
| * unused bandwidth also resolves T_Neg and | |
| * reconfiguration changes. Many of the SBM state | |
| * machine inputs are sourced by the underlying | |
| * FDDI sub-system supporting the SBA application. | |
| * | |
| * ******************************************************************* | |
| */ | |
| #include "h/types.h" | |
| #include "h/fddi.h" | |
| #include "h/smc.h" | |
| #include "h/smt_p.h" | |
| #ifndef SLIM_SMT | |
| #ifdef ESS | |
| #ifndef lint | |
| static const char ID_sccs[] = "@(#)ess.c 1.10 96/02/23 (C) SK" ; | |
| #define LINT_USE(x) | |
| #else | |
| #define LINT_USE(x) (x)=(x) | |
| #endif | |
| #define MS2BCLK(x) ((x)*12500L) | |
| /* | |
| ------------------------------------------------------------- | |
| LOCAL VARIABLES: | |
| ------------------------------------------------------------- | |
| */ | |
| static const u_short plist_raf_alc_res[] = { SMT_P0012, SMT_P320B, SMT_P320F, | |
| SMT_P3210, SMT_P0019, SMT_P001A, | |
| SMT_P001D, 0 } ; | |
| static const u_short plist_raf_chg_req[] = { SMT_P320B, SMT_P320F, SMT_P3210, | |
| SMT_P001A, 0 } ; | |
| static const struct fddi_addr smt_sba_da = {{0x80,0x01,0x43,0x00,0x80,0x0C}} ; | |
| static const struct fddi_addr null_addr = {{0,0,0,0,0,0}} ; | |
| /* | |
| ------------------------------------------------------------- | |
| GLOBAL VARIABLES: | |
| ------------------------------------------------------------- | |
| */ | |
| /* | |
| ------------------------------------------------------------- | |
| LOCAL FUNCTIONS: | |
| ------------------------------------------------------------- | |
| */ | |
| static void ess_send_response(struct s_smc *smc, struct smt_header *sm, | |
| int sba_cmd); | |
| static void ess_config_fifo(struct s_smc *smc); | |
| static void ess_send_alc_req(struct s_smc *smc); | |
| static void ess_send_frame(struct s_smc *smc, SMbuf *mb); | |
| /* | |
| ------------------------------------------------------------- | |
| EXTERNAL FUNCTIONS: | |
| ------------------------------------------------------------- | |
| */ | |
| /* | |
| ------------------------------------------------------------- | |
| PUBLIC FUNCTIONS: | |
| ------------------------------------------------------------- | |
| */ | |
| void ess_timer_poll(struct s_smc *smc); | |
| void ess_para_change(struct s_smc *smc); | |
| int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm, | |
| int fs); | |
| static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead); | |
| /* | |
| * -------------------------------------------------------------------------- | |
| * End Station Support (ESS) | |
| * -------------------------------------------------------------------------- | |
| */ | |
| /* | |
| * evaluate the RAF frame | |
| */ | |
| int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm, | |
| int fs) | |
| { | |
| void *p ; /* universal pointer */ | |
| struct smt_p_0016 *cmd ; /* para: command for the ESS */ | |
| SMbuf *db ; | |
| u_long msg_res_type ; /* recource type */ | |
| u_long payload, overhead ; | |
| int local ; | |
| int i ; | |
| /* | |
| * Message Processing Code | |
| */ | |
| local = ((fs & L_INDICATOR) != 0) ; | |
| /* | |
| * get the resource type | |
| */ | |
| if (!(p = (void *) sm_to_para(smc,sm,SMT_P0015))) { | |
| DB_ESS("ESS: RAF frame error, parameter type not found\n",0,0) ; | |
| return fs; | |
| } | |
| msg_res_type = ((struct smt_p_0015 *)p)->res_type ; | |
| /* | |
| * get the pointer to the ESS command | |
| */ | |
| if (!(cmd = (struct smt_p_0016 *) sm_to_para(smc,sm,SMT_P0016))) { | |
| /* | |
| * error in frame: para ESS command was not found | |
| */ | |
| DB_ESS("ESS: RAF frame error, parameter command not found\n",0,0); | |
| return fs; | |
| } | |
| DB_ESSN(2,"fc %x ft %x\n",sm->smt_class,sm->smt_type) ; | |
| DB_ESSN(2,"ver %x tran %lx\n",sm->smt_version,sm->smt_tid) ; | |
| DB_ESSN(2,"stn_id %s\n",addr_to_string(&sm->smt_source),0) ; | |
| DB_ESSN(2,"infolen %x res %x\n",sm->smt_len, msg_res_type) ; | |
| DB_ESSN(2,"sbacmd %x\n",cmd->sba_cmd,0) ; | |
| /* | |
| * evaluate the ESS command | |
| */ | |
| switch (cmd->sba_cmd) { | |
| /* | |
| * Process an ESS Allocation Request | |
| */ | |
| case REQUEST_ALLOCATION : | |
| /* | |
| * check for an RAF Request (Allocation Request) | |
| */ | |
| if (sm->smt_type == SMT_REQUEST) { | |
| /* | |
| * process the Allocation request only if the frame is | |
| * local and no static allocation is used | |
| */ | |
| if (!local || smc->mib.fddiESSPayload) | |
| return fs; | |
| p = (void *) sm_to_para(smc,sm,SMT_P0019) ; | |
| for (i = 0; i < 5; i++) { | |
| if (((struct smt_p_0019 *)p)->alloc_addr.a[i]) { | |
| return fs; | |
| } | |
| } | |
| /* | |
| * Note: The Application should send a LAN_LOC_FRAME. | |
| * The ESS do not send the Frame to the network! | |
| */ | |
| smc->ess.alloc_trans_id = sm->smt_tid ; | |
| DB_ESS("ESS: save Alloc Req Trans ID %lx\n",sm->smt_tid,0); | |
| p = (void *) sm_to_para(smc,sm,SMT_P320F) ; | |
| ((struct smt_p_320f *)p)->mib_payload = | |
| smc->mib.a[PATH0].fddiPATHSbaPayload ; | |
| p = (void *) sm_to_para(smc,sm,SMT_P3210) ; | |
| ((struct smt_p_3210 *)p)->mib_overhead = | |
| smc->mib.a[PATH0].fddiPATHSbaOverhead ; | |
| sm->smt_dest = smt_sba_da ; | |
| if (smc->ess.local_sba_active) | |
| return fs | I_INDICATOR; | |
| if (!(db = smt_get_mbuf(smc))) | |
| return fs; | |
| db->sm_len = mb->sm_len ; | |
| db->sm_off = mb->sm_off ; | |
| memcpy(((char *)(db->sm_data+db->sm_off)),(char *)sm, | |
| (int)db->sm_len) ; | |
| dump_smt(smc, | |
| (struct smt_header *)(db->sm_data+db->sm_off), | |
| "RAF") ; | |
| smt_send_frame(smc,db,FC_SMT_INFO,0) ; | |
| return fs; | |
| } | |
| /* | |
| * The RAF frame is an Allocation Response ! | |
| * check the parameters | |
| */ | |
| if (smt_check_para(smc,sm,plist_raf_alc_res)) { | |
| DB_ESS("ESS: RAF with para problem, ignoring\n",0,0) ; | |
| return fs; | |
| } | |
| /* | |
| * VERIFY THE FRAME IS WELL BUILT: | |
| * | |
| * 1. path index = primary ring only | |
| * 2. resource type = sync bw only | |
| * 3. trans action id = alloc_trans_id | |
| * 4. reason code = success | |
| * | |
| * If any are violated, discard the RAF frame | |
| */ | |
| if ((((struct smt_p_320b *)sm_to_para(smc,sm,SMT_P320B))->path_index | |
| != PRIMARY_RING) || | |
| (msg_res_type != SYNC_BW) || | |
| (((struct smt_p_reason *)sm_to_para(smc,sm,SMT_P0012))->rdf_reason | |
| != SMT_RDF_SUCCESS) || | |
| (sm->smt_tid != smc->ess.alloc_trans_id)) { | |
| DB_ESS("ESS: Allocation Response not accepted\n",0,0) ; | |
| return fs; | |
| } | |
| /* | |
| * Extract message parameters | |
| */ | |
| p = (void *) sm_to_para(smc,sm,SMT_P320F) ; | |
| if (!p) { | |
| printk(KERN_ERR "ESS: sm_to_para failed"); | |
| return fs; | |
| } | |
| payload = ((struct smt_p_320f *)p)->mib_payload ; | |
| p = (void *) sm_to_para(smc,sm,SMT_P3210) ; | |
| if (!p) { | |
| printk(KERN_ERR "ESS: sm_to_para failed"); | |
| return fs; | |
| } | |
| overhead = ((struct smt_p_3210 *)p)->mib_overhead ; | |
| DB_ESSN(2,"payload= %lx overhead= %lx\n",payload,overhead) ; | |
| /* | |
| * process the bandwidth allocation | |
| */ | |
| (void)process_bw_alloc(smc,(long)payload,(long)overhead) ; | |
| return fs; | |
| /* end of Process Allocation Request */ | |
| /* | |
| * Process an ESS Change Request | |
| */ | |
| case CHANGE_ALLOCATION : | |
| /* | |
| * except only replies | |
| */ | |
| if (sm->smt_type != SMT_REQUEST) { | |
| DB_ESS("ESS: Do not process Change Responses\n",0,0) ; | |
| return fs; | |
| } | |
| /* | |
| * check the para for the Change Request | |
| */ | |
| if (smt_check_para(smc,sm,plist_raf_chg_req)) { | |
| DB_ESS("ESS: RAF with para problem, ignoring\n",0,0) ; | |
| return fs; | |
| } | |
| /* | |
| * Verify the path index and resource | |
| * type are correct. If any of | |
| * these are false, don't process this | |
| * change request frame. | |
| */ | |
| if ((((struct smt_p_320b *)sm_to_para(smc,sm,SMT_P320B))->path_index | |
| != PRIMARY_RING) || (msg_res_type != SYNC_BW)) { | |
| DB_ESS("ESS: RAF frame with para problem, ignoring\n",0,0) ; | |
| return fs; | |
| } | |
| /* | |
| * Extract message queue parameters | |
| */ | |
| p = (void *) sm_to_para(smc,sm,SMT_P320F) ; | |
| payload = ((struct smt_p_320f *)p)->mib_payload ; | |
| p = (void *) sm_to_para(smc,sm,SMT_P3210) ; | |
| overhead = ((struct smt_p_3210 *)p)->mib_overhead ; | |
| DB_ESSN(2,"ESS: Change Request from %s\n", | |
| addr_to_string(&sm->smt_source),0) ; | |
| DB_ESSN(2,"payload= %lx overhead= %lx\n",payload,overhead) ; | |
| /* | |
| * process the bandwidth allocation | |
| */ | |
| if(!process_bw_alloc(smc,(long)payload,(long)overhead)) | |
| return fs; | |
| /* | |
| * send an RAF Change Reply | |
| */ | |
| ess_send_response(smc,sm,CHANGE_ALLOCATION) ; | |
| return fs; | |
| /* end of Process Change Request */ | |
| /* | |
| * Process Report Response | |
| */ | |
| case REPORT_ALLOCATION : | |
| /* | |
| * except only requests | |
| */ | |
| if (sm->smt_type != SMT_REQUEST) { | |
| DB_ESS("ESS: Do not process a Report Reply\n",0,0) ; | |
| return fs; | |
| } | |
| DB_ESSN(2,"ESS: Report Request from %s\n", | |
| addr_to_string(&(sm->smt_source)),0) ; | |
| /* | |
| * verify that the resource type is sync bw only | |
| */ | |
| if (msg_res_type != SYNC_BW) { | |
| DB_ESS("ESS: ignoring RAF with para problem\n",0,0) ; | |
| return fs; | |
| } | |
| /* | |
| * send an RAF Change Reply | |
| */ | |
| ess_send_response(smc,sm,REPORT_ALLOCATION) ; | |
| return fs; | |
| /* end of Process Report Request */ | |
| default: | |
| /* | |
| * error in frame | |
| */ | |
| DB_ESS("ESS: ignoring RAF with bad sba_cmd\n",0,0) ; | |
| break ; | |
| } | |
| return fs; | |
| } | |
| /* | |
| * determines the synchronous bandwidth, set the TSYNC register and the | |
| * mib variables SBAPayload, SBAOverhead and fddiMACT-NEG. | |
| */ | |
| static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead) | |
| { | |
| /* | |
| * determine the synchronous bandwidth (sync_bw) in bytes per T-NEG, | |
| * if the payload is greater than zero. | |
| * For the SBAPayload and the SBAOverhead we have the following | |
| * unite quations | |
| * _ _ | |
| * | bytes | | |
| * SBAPayload = | 8000 ------ | | |
| * | s | | |
| * - - | |
| * _ _ | |
| * | bytes | | |
| * SBAOverhead = | ------ | | |
| * | T-NEG | | |
| * - - | |
| * | |
| * T-NEG is described by the equation: | |
| * | |
| * (-) fddiMACT-NEG | |
| * T-NEG = ------------------- | |
| * 12500000 1/s | |
| * | |
| * The number of bytes we are able to send is the payload | |
| * plus the overhead. | |
| * | |
| * bytes T-NEG SBAPayload 8000 bytes/s | |
| * sync_bw = SBAOverhead ------ + ----------------------------- | |
| * T-NEG T-NEG | |
| * | |
| * | |
| * 1 | |
| * sync_bw = SBAOverhead + ---- (-)fddiMACT-NEG * SBAPayload | |
| * 1562 | |
| * | |
| */ | |
| /* | |
| * set the mib attributes fddiPATHSbaOverhead, fddiPATHSbaPayload | |
| */ | |
| /* if (smt_set_obj(smc,SMT_P320F,payload,S_SET)) { | |
| DB_ESS("ESS: SMT does not accept the payload value\n",0,0) ; | |
| return FALSE; | |
| } | |
| if (smt_set_obj(smc,SMT_P3210,overhead,S_SET)) { | |
| DB_ESS("ESS: SMT does not accept the overhead value\n",0,0) ; | |
| return FALSE; | |
| } */ | |
| /* premliminary */ | |
| if (payload > MAX_PAYLOAD || overhead > 5000) { | |
| DB_ESS("ESS: payload / overhead not accepted\n",0,0) ; | |
| return FALSE; | |
| } | |
| /* | |
| * start the iterative allocation process if the payload or the overhead | |
| * are smaller than the parsed values | |
| */ | |
| if (smc->mib.fddiESSPayload && | |
| ((u_long)payload != smc->mib.fddiESSPayload || | |
| (u_long)overhead != smc->mib.fddiESSOverhead)) { | |
| smc->ess.raf_act_timer_poll = TRUE ; | |
| smc->ess.timer_count = 0 ; | |
| } | |
| /* | |
| * evulate the Payload | |
| */ | |
| if (payload) { | |
| DB_ESSN(2,"ESS: turn SMT_ST_SYNC_SERVICE bit on\n",0,0) ; | |
| smc->ess.sync_bw_available = TRUE ; | |
| smc->ess.sync_bw = overhead - | |
| (long)smc->mib.m[MAC0].fddiMACT_Neg * | |
| payload / 1562 ; | |
| } | |
| else { | |
| DB_ESSN(2,"ESS: turn SMT_ST_SYNC_SERVICE bit off\n",0,0) ; | |
| smc->ess.sync_bw_available = FALSE ; | |
| smc->ess.sync_bw = 0 ; | |
| overhead = 0 ; | |
| } | |
| smc->mib.a[PATH0].fddiPATHSbaPayload = payload ; | |
| smc->mib.a[PATH0].fddiPATHSbaOverhead = overhead ; | |
| DB_ESSN(2,"tsync = %lx\n",smc->ess.sync_bw,0) ; | |
| ess_config_fifo(smc) ; | |
| set_formac_tsync(smc,smc->ess.sync_bw) ; | |
| return TRUE; | |
| } | |
| static void ess_send_response(struct s_smc *smc, struct smt_header *sm, | |
| int sba_cmd) | |
| { | |
| struct smt_sba_chg *chg ; | |
| SMbuf *mb ; | |
| void *p ; | |
| /* | |
| * get and initialize the response frame | |
| */ | |
| if (sba_cmd == CHANGE_ALLOCATION) { | |
| if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY, | |
| sizeof(struct smt_sba_chg)))) | |
| return ; | |
| } | |
| else { | |
| if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY, | |
| sizeof(struct smt_sba_rep_res)))) | |
| return ; | |
| } | |
| chg = smtod(mb,struct smt_sba_chg *) ; | |
| chg->smt.smt_tid = sm->smt_tid ; | |
| chg->smt.smt_dest = sm->smt_source ; | |
| /* set P15 */ | |
| chg->s_type.para.p_type = SMT_P0015 ; | |
| chg->s_type.para.p_len = sizeof(struct smt_p_0015) - PARA_LEN ; | |
| chg->s_type.res_type = SYNC_BW ; | |
| /* set P16 */ | |
| chg->cmd.para.p_type = SMT_P0016 ; | |
| chg->cmd.para.p_len = sizeof(struct smt_p_0016) - PARA_LEN ; | |
| chg->cmd.sba_cmd = sba_cmd ; | |
| /* set P320B */ | |
| chg->path.para.p_type = SMT_P320B ; | |
| chg->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ; | |
| chg->path.mib_index = SBAPATHINDEX ; | |
| chg->path.path_pad = 0; | |
| chg->path.path_index = PRIMARY_RING ; | |
| /* set P320F */ | |
| chg->payload.para.p_type = SMT_P320F ; | |
| chg->payload.para.p_len = sizeof(struct smt_p_320f) - PARA_LEN ; | |
| chg->payload.mib_index = SBAPATHINDEX ; | |
| chg->payload.mib_payload = smc->mib.a[PATH0].fddiPATHSbaPayload ; | |
| /* set P3210 */ | |
| chg->overhead.para.p_type = SMT_P3210 ; | |
| chg->overhead.para.p_len = sizeof(struct smt_p_3210) - PARA_LEN ; | |
| chg->overhead.mib_index = SBAPATHINDEX ; | |
| chg->overhead.mib_overhead = smc->mib.a[PATH0].fddiPATHSbaOverhead ; | |
| if (sba_cmd == CHANGE_ALLOCATION) { | |
| /* set P1A */ | |
| chg->cat.para.p_type = SMT_P001A ; | |
| chg->cat.para.p_len = sizeof(struct smt_p_001a) - PARA_LEN ; | |
| p = (void *) sm_to_para(smc,sm,SMT_P001A) ; | |
| chg->cat.category = ((struct smt_p_001a *)p)->category ; | |
| } | |
| dump_smt(smc,(struct smt_header *)chg,"RAF") ; | |
| ess_send_frame(smc,mb) ; | |
| } | |
| void ess_timer_poll(struct s_smc *smc) | |
| { | |
| if (!smc->ess.raf_act_timer_poll) | |
| return ; | |
| DB_ESSN(2,"ESS: timer_poll\n",0,0) ; | |
| smc->ess.timer_count++ ; | |
| if (smc->ess.timer_count == 10) { | |
| smc->ess.timer_count = 0 ; | |
| ess_send_alc_req(smc) ; | |
| } | |
| } | |
| static void ess_send_alc_req(struct s_smc *smc) | |
| { | |
| struct smt_sba_alc_req *req ; | |
| SMbuf *mb ; | |
| /* | |
| * send never allocation request where the requested payload and | |
| * overhead is zero or deallocate bandwidth when no bandwidth is | |
| * parsed | |
| */ | |
| if (!smc->mib.fddiESSPayload) { | |
| smc->mib.fddiESSOverhead = 0 ; | |
| } | |
| else { | |
| if (!smc->mib.fddiESSOverhead) | |
| smc->mib.fddiESSOverhead = DEFAULT_OV ; | |
| } | |
| if (smc->mib.fddiESSOverhead == | |
| smc->mib.a[PATH0].fddiPATHSbaOverhead && | |
| smc->mib.fddiESSPayload == | |
| smc->mib.a[PATH0].fddiPATHSbaPayload){ | |
| smc->ess.raf_act_timer_poll = FALSE ; | |
| smc->ess.timer_count = 7 ; /* next RAF alc req after 3 s */ | |
| return ; | |
| } | |
| /* | |
| * get and initialize the response frame | |
| */ | |
| if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REQUEST, | |
| sizeof(struct smt_sba_alc_req)))) | |
| return ; | |
| req = smtod(mb,struct smt_sba_alc_req *) ; | |
| req->smt.smt_tid = smc->ess.alloc_trans_id = smt_get_tid(smc) ; | |
| req->smt.smt_dest = smt_sba_da ; | |
| /* set P15 */ | |
| req->s_type.para.p_type = SMT_P0015 ; | |
| req->s_type.para.p_len = sizeof(struct smt_p_0015) - PARA_LEN ; | |
| req->s_type.res_type = SYNC_BW ; | |
| /* set P16 */ | |
| req->cmd.para.p_type = SMT_P0016 ; | |
| req->cmd.para.p_len = sizeof(struct smt_p_0016) - PARA_LEN ; | |
| req->cmd.sba_cmd = REQUEST_ALLOCATION ; | |
| /* | |
| * set the parameter type and parameter length of all used | |
| * parameters | |
| */ | |
| /* set P320B */ | |
| req->path.para.p_type = SMT_P320B ; | |
| req->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ; | |
| req->path.mib_index = SBAPATHINDEX ; | |
| req->path.path_pad = 0; | |
| req->path.path_index = PRIMARY_RING ; | |
| /* set P0017 */ | |
| req->pl_req.para.p_type = SMT_P0017 ; | |
| req->pl_req.para.p_len = sizeof(struct smt_p_0017) - PARA_LEN ; | |
| req->pl_req.sba_pl_req = smc->mib.fddiESSPayload - | |
| smc->mib.a[PATH0].fddiPATHSbaPayload ; | |
| /* set P0018 */ | |
| req->ov_req.para.p_type = SMT_P0018 ; | |
| req->ov_req.para.p_len = sizeof(struct smt_p_0018) - PARA_LEN ; | |
| req->ov_req.sba_ov_req = smc->mib.fddiESSOverhead - | |
| smc->mib.a[PATH0].fddiPATHSbaOverhead ; | |
| /* set P320F */ | |
| req->payload.para.p_type = SMT_P320F ; | |
| req->payload.para.p_len = sizeof(struct smt_p_320f) - PARA_LEN ; | |
| req->payload.mib_index = SBAPATHINDEX ; | |
| req->payload.mib_payload = smc->mib.a[PATH0].fddiPATHSbaPayload ; | |
| /* set P3210 */ | |
| req->overhead.para.p_type = SMT_P3210 ; | |
| req->overhead.para.p_len = sizeof(struct smt_p_3210) - PARA_LEN ; | |
| req->overhead.mib_index = SBAPATHINDEX ; | |
| req->overhead.mib_overhead = smc->mib.a[PATH0].fddiPATHSbaOverhead ; | |
| /* set P19 */ | |
| req->a_addr.para.p_type = SMT_P0019 ; | |
| req->a_addr.para.p_len = sizeof(struct smt_p_0019) - PARA_LEN ; | |
| req->a_addr.sba_pad = 0; | |
| req->a_addr.alloc_addr = null_addr ; | |
| /* set P1A */ | |
| req->cat.para.p_type = SMT_P001A ; | |
| req->cat.para.p_len = sizeof(struct smt_p_001a) - PARA_LEN ; | |
| req->cat.category = smc->mib.fddiESSCategory ; | |
| /* set P1B */ | |
| req->tneg.para.p_type = SMT_P001B ; | |
| req->tneg.para.p_len = sizeof(struct smt_p_001b) - PARA_LEN ; | |
| req->tneg.max_t_neg = smc->mib.fddiESSMaxTNeg ; | |
| /* set P1C */ | |
| req->segm.para.p_type = SMT_P001C ; | |
| req->segm.para.p_len = sizeof(struct smt_p_001c) - PARA_LEN ; | |
| req->segm.min_seg_siz = smc->mib.fddiESSMinSegmentSize ; | |
| dump_smt(smc,(struct smt_header *)req,"RAF") ; | |
| ess_send_frame(smc,mb) ; | |
| } | |
| static void ess_send_frame(struct s_smc *smc, SMbuf *mb) | |
| { | |
| /* | |
| * check if the frame must be send to the own ESS | |
| */ | |
| if (smc->ess.local_sba_active) { | |
| /* | |
| * Send the Change Reply to the local SBA | |
| */ | |
| DB_ESS("ESS:Send to the local SBA\n",0,0) ; | |
| if (!smc->ess.sba_reply_pend) | |
| smc->ess.sba_reply_pend = mb ; | |
| else { | |
| DB_ESS("Frame is lost - another frame was pending\n",0,0); | |
| smt_free_mbuf(smc,mb) ; | |
| } | |
| } | |
| else { | |
| /* | |
| * Send the SBA RAF Change Reply to the network | |
| */ | |
| DB_ESS("ESS:Send to the network\n",0,0) ; | |
| smt_send_frame(smc,mb,FC_SMT_INFO,0) ; | |
| } | |
| } | |
| void ess_para_change(struct s_smc *smc) | |
| { | |
| (void)process_bw_alloc(smc,(long)smc->mib.a[PATH0].fddiPATHSbaPayload, | |
| (long)smc->mib.a[PATH0].fddiPATHSbaOverhead) ; | |
| } | |
| static void ess_config_fifo(struct s_smc *smc) | |
| { | |
| /* | |
| * if nothing to do exit | |
| */ | |
| if (smc->mib.a[PATH0].fddiPATHSbaPayload) { | |
| if (smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON && | |
| (smc->hw.fp.fifo.fifo_config_mode&SEND_ASYNC_AS_SYNC) == | |
| smc->mib.fddiESSSynchTxMode) { | |
| return ; | |
| } | |
| } | |
| else { | |
| if (!(smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON)) { | |
| return ; | |
| } | |
| } | |
| /* | |
| * split up the FIFO and reinitialize the queues | |
| */ | |
| formac_reinit_tx(smc) ; | |
| } | |
| #endif /* ESS */ | |
| #endif /* no SLIM_SMT */ | |