| /* | |
| * Driver for the PN544 NFC chip. | |
| * | |
| * Copyright (C) Nokia Corporation | |
| * | |
| * Author: Jari Vanhala <ext-jari.vanhala@nokia.com> | |
| * Contact: Matti Aaltonen <matti.j.aaltonen@nokia.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * version 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/completion.h> | |
| #include <linux/crc-ccitt.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/nfc/pn544.h> | |
| #include <linux/poll.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/serial_core.h> /* for TCGETS */ | |
| #include <linux/slab.h> | |
| #define DRIVER_CARD "PN544 NFC" | |
| #define DRIVER_DESC "NFC driver for PN544" | |
| static struct i2c_device_id pn544_id_table[] = { | |
| { PN544_DRIVER_NAME, 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, pn544_id_table); | |
| #define HCI_MODE 0 | |
| #define FW_MODE 1 | |
| enum pn544_state { | |
| PN544_ST_COLD, | |
| PN544_ST_FW_READY, | |
| PN544_ST_READY, | |
| }; | |
| enum pn544_irq { | |
| PN544_NONE, | |
| PN544_INT, | |
| }; | |
| struct pn544_info { | |
| struct miscdevice miscdev; | |
| struct i2c_client *i2c_dev; | |
| struct regulator_bulk_data regs[3]; | |
| enum pn544_state state; | |
| wait_queue_head_t read_wait; | |
| loff_t read_offset; | |
| enum pn544_irq read_irq; | |
| struct mutex read_mutex; /* Serialize read_irq access */ | |
| struct mutex mutex; /* Serialize info struct access */ | |
| u8 *buf; | |
| size_t buflen; | |
| }; | |
| static const char reg_vdd_io[] = "Vdd_IO"; | |
| static const char reg_vbat[] = "VBat"; | |
| static const char reg_vsim[] = "VSim"; | |
| /* sysfs interface */ | |
| static ssize_t pn544_test(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct pn544_info *info = dev_get_drvdata(dev); | |
| struct i2c_client *client = info->i2c_dev; | |
| struct pn544_nfc_platform_data *pdata = client->dev.platform_data; | |
| return snprintf(buf, PAGE_SIZE, "%d\n", pdata->test()); | |
| } | |
| static int pn544_enable(struct pn544_info *info, int mode) | |
| { | |
| struct pn544_nfc_platform_data *pdata; | |
| struct i2c_client *client = info->i2c_dev; | |
| int r; | |
| r = regulator_bulk_enable(ARRAY_SIZE(info->regs), info->regs); | |
| if (r < 0) | |
| return r; | |
| pdata = client->dev.platform_data; | |
| info->read_irq = PN544_NONE; | |
| if (pdata->enable) | |
| pdata->enable(mode); | |
| if (mode) { | |
| info->state = PN544_ST_FW_READY; | |
| dev_dbg(&client->dev, "now in FW-mode\n"); | |
| } else { | |
| info->state = PN544_ST_READY; | |
| dev_dbg(&client->dev, "now in HCI-mode\n"); | |
| } | |
| usleep_range(10000, 15000); | |
| return 0; | |
| } | |
| static void pn544_disable(struct pn544_info *info) | |
| { | |
| struct pn544_nfc_platform_data *pdata; | |
| struct i2c_client *client = info->i2c_dev; | |
| pdata = client->dev.platform_data; | |
| if (pdata->disable) | |
| pdata->disable(); | |
| info->state = PN544_ST_COLD; | |
| dev_dbg(&client->dev, "Now in OFF-mode\n"); | |
| msleep(PN544_RESETVEN_TIME); | |
| info->read_irq = PN544_NONE; | |
| regulator_bulk_disable(ARRAY_SIZE(info->regs), info->regs); | |
| } | |
| static int check_crc(u8 *buf, int buflen) | |
| { | |
| u8 len; | |
| u16 crc; | |
| len = buf[0] + 1; | |
| if (len < 4 || len != buflen || len > PN544_MSG_MAX_SIZE) { | |
| pr_err(PN544_DRIVER_NAME | |
| ": CRC; corrupt packet len %u (%d)\n", len, buflen); | |
| print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE, | |
| 16, 2, buf, buflen, false); | |
| return -EPERM; | |
| } | |
| crc = crc_ccitt(0xffff, buf, len - 2); | |
| crc = ~crc; | |
| if (buf[len-2] != (crc & 0xff) || buf[len-1] != (crc >> 8)) { | |
| pr_err(PN544_DRIVER_NAME ": CRC error 0x%x != 0x%x 0x%x\n", | |
| crc, buf[len-1], buf[len-2]); | |
| print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE, | |
| 16, 2, buf, buflen, false); | |
| return -EPERM; | |
| } | |
| return 0; | |
| } | |
| static int pn544_i2c_write(struct i2c_client *client, u8 *buf, int len) | |
| { | |
| int r; | |
| if (len < 4 || len != (buf[0] + 1)) { | |
| dev_err(&client->dev, "%s: Illegal message length: %d\n", | |
| __func__, len); | |
| return -EINVAL; | |
| } | |
| if (check_crc(buf, len)) | |
| return -EINVAL; | |
| usleep_range(3000, 6000); | |
| r = i2c_master_send(client, buf, len); | |
| dev_dbg(&client->dev, "send: %d\n", r); | |
| if (r == -EREMOTEIO) { /* Retry, chip was in standby */ | |
| usleep_range(6000, 10000); | |
| r = i2c_master_send(client, buf, len); | |
| dev_dbg(&client->dev, "send2: %d\n", r); | |
| } | |
| if (r != len) | |
| return -EREMOTEIO; | |
| return r; | |
| } | |
| static int pn544_i2c_read(struct i2c_client *client, u8 *buf, int buflen) | |
| { | |
| int r; | |
| u8 len; | |
| /* | |
| * You could read a packet in one go, but then you'd need to read | |
| * max size and rest would be 0xff fill, so we do split reads. | |
| */ | |
| r = i2c_master_recv(client, &len, 1); | |
| dev_dbg(&client->dev, "recv1: %d\n", r); | |
| if (r != 1) | |
| return -EREMOTEIO; | |
| if (len < PN544_LLC_HCI_OVERHEAD) | |
| len = PN544_LLC_HCI_OVERHEAD; | |
| else if (len > (PN544_MSG_MAX_SIZE - 1)) | |
| len = PN544_MSG_MAX_SIZE - 1; | |
| if (1 + len > buflen) /* len+(data+crc16) */ | |
| return -EMSGSIZE; | |
| buf[0] = len; | |
| r = i2c_master_recv(client, buf + 1, len); | |
| dev_dbg(&client->dev, "recv2: %d\n", r); | |
| if (r != len) | |
| return -EREMOTEIO; | |
| usleep_range(3000, 6000); | |
| return r + 1; | |
| } | |
| static int pn544_fw_write(struct i2c_client *client, u8 *buf, int len) | |
| { | |
| int r; | |
| dev_dbg(&client->dev, "%s\n", __func__); | |
| if (len < PN544_FW_HEADER_SIZE || | |
| (PN544_FW_HEADER_SIZE + (buf[1] << 8) + buf[2]) != len) | |
| return -EINVAL; | |
| r = i2c_master_send(client, buf, len); | |
| dev_dbg(&client->dev, "fw send: %d\n", r); | |
| if (r == -EREMOTEIO) { /* Retry, chip was in standby */ | |
| usleep_range(6000, 10000); | |
| r = i2c_master_send(client, buf, len); | |
| dev_dbg(&client->dev, "fw send2: %d\n", r); | |
| } | |
| if (r != len) | |
| return -EREMOTEIO; | |
| return r; | |
| } | |
| static int pn544_fw_read(struct i2c_client *client, u8 *buf, int buflen) | |
| { | |
| int r, len; | |
| if (buflen < PN544_FW_HEADER_SIZE) | |
| return -EINVAL; | |
| r = i2c_master_recv(client, buf, PN544_FW_HEADER_SIZE); | |
| dev_dbg(&client->dev, "FW recv1: %d\n", r); | |
| if (r < 0) | |
| return r; | |
| if (r < PN544_FW_HEADER_SIZE) | |
| return -EINVAL; | |
| len = (buf[1] << 8) + buf[2]; | |
| if (len == 0) /* just header, no additional data */ | |
| return r; | |
| if (len > buflen - PN544_FW_HEADER_SIZE) | |
| return -EMSGSIZE; | |
| r = i2c_master_recv(client, buf + PN544_FW_HEADER_SIZE, len); | |
| dev_dbg(&client->dev, "fw recv2: %d\n", r); | |
| if (r != len) | |
| return -EINVAL; | |
| return r + PN544_FW_HEADER_SIZE; | |
| } | |
| static irqreturn_t pn544_irq_thread_fn(int irq, void *dev_id) | |
| { | |
| struct pn544_info *info = dev_id; | |
| struct i2c_client *client = info->i2c_dev; | |
| BUG_ON(!info); | |
| BUG_ON(irq != info->i2c_dev->irq); | |
| dev_dbg(&client->dev, "IRQ\n"); | |
| mutex_lock(&info->read_mutex); | |
| info->read_irq = PN544_INT; | |
| mutex_unlock(&info->read_mutex); | |
| wake_up_interruptible(&info->read_wait); | |
| return IRQ_HANDLED; | |
| } | |
| static enum pn544_irq pn544_irq_state(struct pn544_info *info) | |
| { | |
| enum pn544_irq irq; | |
| mutex_lock(&info->read_mutex); | |
| irq = info->read_irq; | |
| mutex_unlock(&info->read_mutex); | |
| /* | |
| * XXX: should we check GPIO-line status directly? | |
| * return pdata->irq_status() ? PN544_INT : PN544_NONE; | |
| */ | |
| return irq; | |
| } | |
| static ssize_t pn544_read(struct file *file, char __user *buf, | |
| size_t count, loff_t *offset) | |
| { | |
| struct pn544_info *info = container_of(file->private_data, | |
| struct pn544_info, miscdev); | |
| struct i2c_client *client = info->i2c_dev; | |
| enum pn544_irq irq; | |
| size_t len; | |
| int r = 0; | |
| dev_dbg(&client->dev, "%s: info: %p, count: %zu\n", __func__, | |
| info, count); | |
| mutex_lock(&info->mutex); | |
| if (info->state == PN544_ST_COLD) { | |
| r = -ENODEV; | |
| goto out; | |
| } | |
| irq = pn544_irq_state(info); | |
| if (irq == PN544_NONE) { | |
| if (file->f_flags & O_NONBLOCK) { | |
| r = -EAGAIN; | |
| goto out; | |
| } | |
| if (wait_event_interruptible(info->read_wait, | |
| (info->read_irq == PN544_INT))) { | |
| r = -ERESTARTSYS; | |
| goto out; | |
| } | |
| } | |
| if (info->state == PN544_ST_FW_READY) { | |
| len = min(count, info->buflen); | |
| mutex_lock(&info->read_mutex); | |
| r = pn544_fw_read(info->i2c_dev, info->buf, len); | |
| info->read_irq = PN544_NONE; | |
| mutex_unlock(&info->read_mutex); | |
| if (r < 0) { | |
| dev_err(&info->i2c_dev->dev, "FW read failed: %d\n", r); | |
| goto out; | |
| } | |
| print_hex_dump(KERN_DEBUG, "FW read: ", DUMP_PREFIX_NONE, | |
| 16, 2, info->buf, r, false); | |
| *offset += r; | |
| if (copy_to_user(buf, info->buf, r)) { | |
| r = -EFAULT; | |
| goto out; | |
| } | |
| } else { | |
| len = min(count, info->buflen); | |
| mutex_lock(&info->read_mutex); | |
| r = pn544_i2c_read(info->i2c_dev, info->buf, len); | |
| info->read_irq = PN544_NONE; | |
| mutex_unlock(&info->read_mutex); | |
| if (r < 0) { | |
| dev_err(&info->i2c_dev->dev, "read failed (%d)\n", r); | |
| goto out; | |
| } | |
| print_hex_dump(KERN_DEBUG, "read: ", DUMP_PREFIX_NONE, | |
| 16, 2, info->buf, r, false); | |
| *offset += r; | |
| if (copy_to_user(buf, info->buf, r)) { | |
| r = -EFAULT; | |
| goto out; | |
| } | |
| } | |
| out: | |
| mutex_unlock(&info->mutex); | |
| return r; | |
| } | |
| static unsigned int pn544_poll(struct file *file, poll_table *wait) | |
| { | |
| struct pn544_info *info = container_of(file->private_data, | |
| struct pn544_info, miscdev); | |
| struct i2c_client *client = info->i2c_dev; | |
| int r = 0; | |
| dev_dbg(&client->dev, "%s: info: %p\n", __func__, info); | |
| mutex_lock(&info->mutex); | |
| if (info->state == PN544_ST_COLD) { | |
| r = -ENODEV; | |
| goto out; | |
| } | |
| poll_wait(file, &info->read_wait, wait); | |
| if (pn544_irq_state(info) == PN544_INT) { | |
| r = POLLIN | POLLRDNORM; | |
| goto out; | |
| } | |
| out: | |
| mutex_unlock(&info->mutex); | |
| return r; | |
| } | |
| static ssize_t pn544_write(struct file *file, const char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct pn544_info *info = container_of(file->private_data, | |
| struct pn544_info, miscdev); | |
| struct i2c_client *client = info->i2c_dev; | |
| ssize_t len; | |
| int r; | |
| dev_dbg(&client->dev, "%s: info: %p, count %zu\n", __func__, | |
| info, count); | |
| mutex_lock(&info->mutex); | |
| if (info->state == PN544_ST_COLD) { | |
| r = -ENODEV; | |
| goto out; | |
| } | |
| /* | |
| * XXX: should we detect rset-writes and clean possible | |
| * read_irq state | |
| */ | |
| if (info->state == PN544_ST_FW_READY) { | |
| size_t fw_len; | |
| if (count < PN544_FW_HEADER_SIZE) { | |
| r = -EINVAL; | |
| goto out; | |
| } | |
| len = min(count, info->buflen); | |
| if (copy_from_user(info->buf, buf, len)) { | |
| r = -EFAULT; | |
| goto out; | |
| } | |
| print_hex_dump(KERN_DEBUG, "FW write: ", DUMP_PREFIX_NONE, | |
| 16, 2, info->buf, len, false); | |
| fw_len = PN544_FW_HEADER_SIZE + (info->buf[1] << 8) + | |
| info->buf[2]; | |
| if (len > fw_len) /* 1 msg at a time */ | |
| len = fw_len; | |
| r = pn544_fw_write(info->i2c_dev, info->buf, len); | |
| } else { | |
| if (count < PN544_LLC_MIN_SIZE) { | |
| r = -EINVAL; | |
| goto out; | |
| } | |
| len = min(count, info->buflen); | |
| if (copy_from_user(info->buf, buf, len)) { | |
| r = -EFAULT; | |
| goto out; | |
| } | |
| print_hex_dump(KERN_DEBUG, "write: ", DUMP_PREFIX_NONE, | |
| 16, 2, info->buf, len, false); | |
| if (len > (info->buf[0] + 1)) /* 1 msg at a time */ | |
| len = info->buf[0] + 1; | |
| r = pn544_i2c_write(info->i2c_dev, info->buf, len); | |
| } | |
| out: | |
| mutex_unlock(&info->mutex); | |
| return r; | |
| } | |
| static long pn544_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | |
| { | |
| struct pn544_info *info = container_of(file->private_data, | |
| struct pn544_info, miscdev); | |
| struct i2c_client *client = info->i2c_dev; | |
| struct pn544_nfc_platform_data *pdata; | |
| unsigned int val; | |
| int r = 0; | |
| dev_dbg(&client->dev, "%s: info: %p, cmd: 0x%x\n", __func__, info, cmd); | |
| mutex_lock(&info->mutex); | |
| if (info->state == PN544_ST_COLD) { | |
| r = -ENODEV; | |
| goto out; | |
| } | |
| pdata = info->i2c_dev->dev.platform_data; | |
| switch (cmd) { | |
| case PN544_GET_FW_MODE: | |
| dev_dbg(&client->dev, "%s: PN544_GET_FW_MODE\n", __func__); | |
| val = (info->state == PN544_ST_FW_READY); | |
| if (copy_to_user((void __user *)arg, &val, sizeof(val))) { | |
| r = -EFAULT; | |
| goto out; | |
| } | |
| break; | |
| case PN544_SET_FW_MODE: | |
| dev_dbg(&client->dev, "%s: PN544_SET_FW_MODE\n", __func__); | |
| if (copy_from_user(&val, (void __user *)arg, sizeof(val))) { | |
| r = -EFAULT; | |
| goto out; | |
| } | |
| if (val) { | |
| if (info->state == PN544_ST_FW_READY) | |
| break; | |
| pn544_disable(info); | |
| r = pn544_enable(info, FW_MODE); | |
| if (r < 0) | |
| goto out; | |
| } else { | |
| if (info->state == PN544_ST_READY) | |
| break; | |
| pn544_disable(info); | |
| r = pn544_enable(info, HCI_MODE); | |
| if (r < 0) | |
| goto out; | |
| } | |
| file->f_pos = info->read_offset; | |
| break; | |
| case TCGETS: | |
| dev_dbg(&client->dev, "%s: TCGETS\n", __func__); | |
| r = -ENOIOCTLCMD; | |
| break; | |
| default: | |
| dev_err(&client->dev, "Unknown ioctl 0x%x\n", cmd); | |
| r = -ENOIOCTLCMD; | |
| break; | |
| } | |
| out: | |
| mutex_unlock(&info->mutex); | |
| return r; | |
| } | |
| static int pn544_open(struct inode *inode, struct file *file) | |
| { | |
| struct pn544_info *info = container_of(file->private_data, | |
| struct pn544_info, miscdev); | |
| struct i2c_client *client = info->i2c_dev; | |
| int r = 0; | |
| dev_dbg(&client->dev, "%s: info: %p, client %p\n", __func__, | |
| info, info->i2c_dev); | |
| mutex_lock(&info->mutex); | |
| /* | |
| * Only 1 at a time. | |
| * XXX: maybe user (counter) would work better | |
| */ | |
| if (info->state != PN544_ST_COLD) { | |
| r = -EBUSY; | |
| goto out; | |
| } | |
| file->f_pos = info->read_offset; | |
| r = pn544_enable(info, HCI_MODE); | |
| out: | |
| mutex_unlock(&info->mutex); | |
| return r; | |
| } | |
| static int pn544_close(struct inode *inode, struct file *file) | |
| { | |
| struct pn544_info *info = container_of(file->private_data, | |
| struct pn544_info, miscdev); | |
| struct i2c_client *client = info->i2c_dev; | |
| dev_dbg(&client->dev, "%s: info: %p, client %p\n", | |
| __func__, info, info->i2c_dev); | |
| mutex_lock(&info->mutex); | |
| pn544_disable(info); | |
| mutex_unlock(&info->mutex); | |
| return 0; | |
| } | |
| static const struct file_operations pn544_fops = { | |
| .owner = THIS_MODULE, | |
| .llseek = no_llseek, | |
| .read = pn544_read, | |
| .write = pn544_write, | |
| .poll = pn544_poll, | |
| .open = pn544_open, | |
| .release = pn544_close, | |
| .unlocked_ioctl = pn544_ioctl, | |
| }; | |
| #ifdef CONFIG_PM | |
| static int pn544_suspend(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct pn544_info *info; | |
| int r = 0; | |
| dev_info(&client->dev, "***\n%s: client %p\n***\n", __func__, client); | |
| info = i2c_get_clientdata(client); | |
| dev_info(&client->dev, "%s: info: %p, client %p\n", __func__, | |
| info, client); | |
| mutex_lock(&info->mutex); | |
| switch (info->state) { | |
| case PN544_ST_FW_READY: | |
| /* Do not suspend while upgrading FW, please! */ | |
| r = -EPERM; | |
| break; | |
| case PN544_ST_READY: | |
| /* | |
| * CHECK: Device should be in standby-mode. No way to check? | |
| * Allowing low power mode for the regulator is potentially | |
| * dangerous if pn544 does not go to suspension. | |
| */ | |
| break; | |
| case PN544_ST_COLD: | |
| break; | |
| }; | |
| mutex_unlock(&info->mutex); | |
| return r; | |
| } | |
| static int pn544_resume(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct pn544_info *info = i2c_get_clientdata(client); | |
| int r = 0; | |
| dev_dbg(&client->dev, "%s: info: %p, client %p\n", __func__, | |
| info, client); | |
| mutex_lock(&info->mutex); | |
| switch (info->state) { | |
| case PN544_ST_READY: | |
| /* | |
| * CHECK: If regulator low power mode is allowed in | |
| * pn544_suspend, we should go back to normal mode | |
| * here. | |
| */ | |
| break; | |
| case PN544_ST_COLD: | |
| break; | |
| case PN544_ST_FW_READY: | |
| break; | |
| }; | |
| mutex_unlock(&info->mutex); | |
| return r; | |
| } | |
| static SIMPLE_DEV_PM_OPS(pn544_pm_ops, pn544_suspend, pn544_resume); | |
| #endif | |
| static struct device_attribute pn544_attr = | |
| __ATTR(nfc_test, S_IRUGO, pn544_test, NULL); | |
| static int __devinit pn544_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct pn544_info *info; | |
| struct pn544_nfc_platform_data *pdata; | |
| int r = 0; | |
| dev_dbg(&client->dev, "%s\n", __func__); | |
| dev_dbg(&client->dev, "IRQ: %d\n", client->irq); | |
| /* private data allocation */ | |
| info = kzalloc(sizeof(struct pn544_info), GFP_KERNEL); | |
| if (!info) { | |
| dev_err(&client->dev, | |
| "Cannot allocate memory for pn544_info.\n"); | |
| r = -ENOMEM; | |
| goto err_info_alloc; | |
| } | |
| info->buflen = max(PN544_MSG_MAX_SIZE, PN544_MAX_I2C_TRANSFER); | |
| info->buf = kzalloc(info->buflen, GFP_KERNEL); | |
| if (!info->buf) { | |
| dev_err(&client->dev, | |
| "Cannot allocate memory for pn544_info->buf.\n"); | |
| r = -ENOMEM; | |
| goto err_buf_alloc; | |
| } | |
| info->regs[0].supply = reg_vdd_io; | |
| info->regs[1].supply = reg_vbat; | |
| info->regs[2].supply = reg_vsim; | |
| r = regulator_bulk_get(&client->dev, ARRAY_SIZE(info->regs), | |
| info->regs); | |
| if (r < 0) | |
| goto err_kmalloc; | |
| info->i2c_dev = client; | |
| info->state = PN544_ST_COLD; | |
| info->read_irq = PN544_NONE; | |
| mutex_init(&info->read_mutex); | |
| mutex_init(&info->mutex); | |
| init_waitqueue_head(&info->read_wait); | |
| i2c_set_clientdata(client, info); | |
| pdata = client->dev.platform_data; | |
| if (!pdata) { | |
| dev_err(&client->dev, "No platform data\n"); | |
| r = -EINVAL; | |
| goto err_reg; | |
| } | |
| if (!pdata->request_resources) { | |
| dev_err(&client->dev, "request_resources() missing\n"); | |
| r = -EINVAL; | |
| goto err_reg; | |
| } | |
| r = pdata->request_resources(client); | |
| if (r) { | |
| dev_err(&client->dev, "Cannot get platform resources\n"); | |
| goto err_reg; | |
| } | |
| r = request_threaded_irq(client->irq, NULL, pn544_irq_thread_fn, | |
| IRQF_TRIGGER_RISING, PN544_DRIVER_NAME, | |
| info); | |
| if (r < 0) { | |
| dev_err(&client->dev, "Unable to register IRQ handler\n"); | |
| goto err_res; | |
| } | |
| /* If we don't have the test we don't need the sysfs file */ | |
| if (pdata->test) { | |
| r = device_create_file(&client->dev, &pn544_attr); | |
| if (r) { | |
| dev_err(&client->dev, | |
| "sysfs registration failed, error %d\n", r); | |
| goto err_irq; | |
| } | |
| } | |
| info->miscdev.minor = MISC_DYNAMIC_MINOR; | |
| info->miscdev.name = PN544_DRIVER_NAME; | |
| info->miscdev.fops = &pn544_fops; | |
| info->miscdev.parent = &client->dev; | |
| r = misc_register(&info->miscdev); | |
| if (r < 0) { | |
| dev_err(&client->dev, "Device registration failed\n"); | |
| goto err_sysfs; | |
| } | |
| dev_dbg(&client->dev, "%s: info: %p, pdata %p, client %p\n", | |
| __func__, info, pdata, client); | |
| return 0; | |
| err_sysfs: | |
| if (pdata->test) | |
| device_remove_file(&client->dev, &pn544_attr); | |
| err_irq: | |
| free_irq(client->irq, info); | |
| err_res: | |
| if (pdata->free_resources) | |
| pdata->free_resources(); | |
| err_reg: | |
| regulator_bulk_free(ARRAY_SIZE(info->regs), info->regs); | |
| err_kmalloc: | |
| kfree(info->buf); | |
| err_buf_alloc: | |
| kfree(info); | |
| err_info_alloc: | |
| return r; | |
| } | |
| static __devexit int pn544_remove(struct i2c_client *client) | |
| { | |
| struct pn544_info *info = i2c_get_clientdata(client); | |
| struct pn544_nfc_platform_data *pdata = client->dev.platform_data; | |
| dev_dbg(&client->dev, "%s\n", __func__); | |
| misc_deregister(&info->miscdev); | |
| if (pdata->test) | |
| device_remove_file(&client->dev, &pn544_attr); | |
| if (info->state != PN544_ST_COLD) { | |
| if (pdata->disable) | |
| pdata->disable(); | |
| info->read_irq = PN544_NONE; | |
| } | |
| free_irq(client->irq, info); | |
| if (pdata->free_resources) | |
| pdata->free_resources(); | |
| regulator_bulk_free(ARRAY_SIZE(info->regs), info->regs); | |
| kfree(info->buf); | |
| kfree(info); | |
| return 0; | |
| } | |
| static struct i2c_driver pn544_driver = { | |
| .driver = { | |
| .name = PN544_DRIVER_NAME, | |
| #ifdef CONFIG_PM | |
| .pm = &pn544_pm_ops, | |
| #endif | |
| }, | |
| .probe = pn544_probe, | |
| .id_table = pn544_id_table, | |
| .remove = __devexit_p(pn544_remove), | |
| }; | |
| static int __init pn544_init(void) | |
| { | |
| int r; | |
| pr_debug(DRIVER_DESC ": %s\n", __func__); | |
| r = i2c_add_driver(&pn544_driver); | |
| if (r) { | |
| pr_err(PN544_DRIVER_NAME ": driver registration failed\n"); | |
| return r; | |
| } | |
| return 0; | |
| } | |
| static void __exit pn544_exit(void) | |
| { | |
| i2c_del_driver(&pn544_driver); | |
| pr_info(DRIVER_DESC ", Exiting.\n"); | |
| } | |
| module_init(pn544_init); | |
| module_exit(pn544_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION(DRIVER_DESC); |