| /* | |
| * File: htirq.c | |
| * Purpose: Hypertransport Interrupt Capability | |
| * | |
| * Copyright (C) 2006 Linux Networx | |
| * Copyright (C) Eric Biederman <ebiederman@lnxi.com> | |
| */ | |
| #include <linux/irq.h> | |
| #include <linux/pci.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/slab.h> | |
| #include <linux/htirq.h> | |
| /* Global ht irq lock. | |
| * | |
| * This is needed to serialize access to the data port in hypertransport | |
| * irq capability. | |
| * | |
| * With multiple simultaneous hypertransport irq devices it might pay | |
| * to make this more fine grained. But start with simple, stupid, and correct. | |
| */ | |
| static DEFINE_SPINLOCK(ht_irq_lock); | |
| struct ht_irq_cfg { | |
| struct pci_dev *dev; | |
| /* Update callback used to cope with buggy hardware */ | |
| ht_irq_update_t *update; | |
| unsigned pos; | |
| unsigned idx; | |
| struct ht_irq_msg msg; | |
| }; | |
| void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg) | |
| { | |
| struct ht_irq_cfg *cfg = irq_get_handler_data(irq); | |
| unsigned long flags; | |
| spin_lock_irqsave(&ht_irq_lock, flags); | |
| if (cfg->msg.address_lo != msg->address_lo) { | |
| pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); | |
| pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_lo); | |
| } | |
| if (cfg->msg.address_hi != msg->address_hi) { | |
| pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1); | |
| pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_hi); | |
| } | |
| if (cfg->update) | |
| cfg->update(cfg->dev, irq, msg); | |
| spin_unlock_irqrestore(&ht_irq_lock, flags); | |
| cfg->msg = *msg; | |
| } | |
| void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg) | |
| { | |
| struct ht_irq_cfg *cfg = irq_get_handler_data(irq); | |
| *msg = cfg->msg; | |
| } | |
| void mask_ht_irq(struct irq_data *data) | |
| { | |
| struct ht_irq_cfg *cfg = irq_data_get_irq_handler_data(data); | |
| struct ht_irq_msg msg = cfg->msg; | |
| msg.address_lo |= 1; | |
| write_ht_irq_msg(data->irq, &msg); | |
| } | |
| void unmask_ht_irq(struct irq_data *data) | |
| { | |
| struct ht_irq_cfg *cfg = irq_data_get_irq_handler_data(data); | |
| struct ht_irq_msg msg = cfg->msg; | |
| msg.address_lo &= ~1; | |
| write_ht_irq_msg(data->irq, &msg); | |
| } | |
| /** | |
| * __ht_create_irq - create an irq and attach it to a device. | |
| * @dev: The hypertransport device to find the irq capability on. | |
| * @idx: Which of the possible irqs to attach to. | |
| * @update: Function to be called when changing the htirq message | |
| * | |
| * The irq number of the new irq or a negative error value is returned. | |
| */ | |
| int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update) | |
| { | |
| struct ht_irq_cfg *cfg; | |
| unsigned long flags; | |
| u32 data; | |
| int max_irq; | |
| int pos; | |
| int irq; | |
| int node; | |
| pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ); | |
| if (!pos) | |
| return -EINVAL; | |
| /* Verify the idx I want to use is in range */ | |
| spin_lock_irqsave(&ht_irq_lock, flags); | |
| pci_write_config_byte(dev, pos + 2, 1); | |
| pci_read_config_dword(dev, pos + 4, &data); | |
| spin_unlock_irqrestore(&ht_irq_lock, flags); | |
| max_irq = (data >> 16) & 0xff; | |
| if ( idx > max_irq) | |
| return -EINVAL; | |
| cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); | |
| if (!cfg) | |
| return -ENOMEM; | |
| cfg->dev = dev; | |
| cfg->update = update; | |
| cfg->pos = pos; | |
| cfg->idx = 0x10 + (idx * 2); | |
| /* Initialize msg to a value that will never match the first write. */ | |
| cfg->msg.address_lo = 0xffffffff; | |
| cfg->msg.address_hi = 0xffffffff; | |
| node = dev_to_node(&dev->dev); | |
| irq = create_irq_nr(0, node); | |
| if (irq <= 0) { | |
| kfree(cfg); | |
| return -EBUSY; | |
| } | |
| irq_set_handler_data(irq, cfg); | |
| if (arch_setup_ht_irq(irq, dev) < 0) { | |
| ht_destroy_irq(irq); | |
| return -EBUSY; | |
| } | |
| return irq; | |
| } | |
| /** | |
| * ht_create_irq - create an irq and attach it to a device. | |
| * @dev: The hypertransport device to find the irq capability on. | |
| * @idx: Which of the possible irqs to attach to. | |
| * | |
| * ht_create_irq needs to be called for all hypertransport devices | |
| * that generate irqs. | |
| * | |
| * The irq number of the new irq or a negative error value is returned. | |
| */ | |
| int ht_create_irq(struct pci_dev *dev, int idx) | |
| { | |
| return __ht_create_irq(dev, idx, NULL); | |
| } | |
| /** | |
| * ht_destroy_irq - destroy an irq created with ht_create_irq | |
| * @irq: irq to be destroyed | |
| * | |
| * This reverses ht_create_irq removing the specified irq from | |
| * existence. The irq should be free before this happens. | |
| */ | |
| void ht_destroy_irq(unsigned int irq) | |
| { | |
| struct ht_irq_cfg *cfg; | |
| cfg = irq_get_handler_data(irq); | |
| irq_set_chip(irq, NULL); | |
| irq_set_handler_data(irq, NULL); | |
| destroy_irq(irq); | |
| kfree(cfg); | |
| } | |
| EXPORT_SYMBOL(__ht_create_irq); | |
| EXPORT_SYMBOL(ht_create_irq); | |
| EXPORT_SYMBOL(ht_destroy_irq); |