| /* | |
| * File: msi.c | |
| * Purpose: PCI Message Signaled Interrupt (MSI) | |
| * | |
| * Copyright (C) 2003-2004 Intel | |
| * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/mm.h> | |
| #include <linux/irq.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/pci.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/msi.h> | |
| #include <linux/smp.h> | |
| #include <linux/errno.h> | |
| #include <linux/io.h> | |
| #include <linux/slab.h> | |
| #include "pci.h" | |
| #include "msi.h" | |
| static int pci_msi_enable = 1; | |
| /* Arch hooks */ | |
| #ifndef arch_msi_check_device | |
| int arch_msi_check_device(struct pci_dev *dev, int nvec, int type) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| #ifndef arch_setup_msi_irqs | |
| # define arch_setup_msi_irqs default_setup_msi_irqs | |
| # define HAVE_DEFAULT_MSI_SETUP_IRQS | |
| #endif | |
| #ifdef HAVE_DEFAULT_MSI_SETUP_IRQS | |
| int default_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) | |
| { | |
| struct msi_desc *entry; | |
| int ret; | |
| /* | |
| * If an architecture wants to support multiple MSI, it needs to | |
| * override arch_setup_msi_irqs() | |
| */ | |
| if (type == PCI_CAP_ID_MSI && nvec > 1) | |
| return 1; | |
| list_for_each_entry(entry, &dev->msi_list, list) { | |
| ret = arch_setup_msi_irq(dev, entry); | |
| if (ret < 0) | |
| return ret; | |
| if (ret > 0) | |
| return -ENOSPC; | |
| } | |
| return 0; | |
| } | |
| #endif | |
| #ifndef arch_teardown_msi_irqs | |
| # define arch_teardown_msi_irqs default_teardown_msi_irqs | |
| # define HAVE_DEFAULT_MSI_TEARDOWN_IRQS | |
| #endif | |
| #ifdef HAVE_DEFAULT_MSI_TEARDOWN_IRQS | |
| void default_teardown_msi_irqs(struct pci_dev *dev) | |
| { | |
| struct msi_desc *entry; | |
| list_for_each_entry(entry, &dev->msi_list, list) { | |
| int i, nvec; | |
| if (entry->irq == 0) | |
| continue; | |
| nvec = 1 << entry->msi_attrib.multiple; | |
| for (i = 0; i < nvec; i++) | |
| arch_teardown_msi_irq(entry->irq + i); | |
| } | |
| } | |
| #endif | |
| static void msi_set_enable(struct pci_dev *dev, int pos, int enable) | |
| { | |
| u16 control; | |
| BUG_ON(!pos); | |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); | |
| control &= ~PCI_MSI_FLAGS_ENABLE; | |
| if (enable) | |
| control |= PCI_MSI_FLAGS_ENABLE; | |
| pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); | |
| } | |
| static void msix_set_enable(struct pci_dev *dev, int enable) | |
| { | |
| int pos; | |
| u16 control; | |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); | |
| if (pos) { | |
| pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); | |
| control &= ~PCI_MSIX_FLAGS_ENABLE; | |
| if (enable) | |
| control |= PCI_MSIX_FLAGS_ENABLE; | |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); | |
| } | |
| } | |
| static inline __attribute_const__ u32 msi_mask(unsigned x) | |
| { | |
| /* Don't shift by >= width of type */ | |
| if (x >= 5) | |
| return 0xffffffff; | |
| return (1 << (1 << x)) - 1; | |
| } | |
| static inline __attribute_const__ u32 msi_capable_mask(u16 control) | |
| { | |
| return msi_mask((control >> 1) & 7); | |
| } | |
| static inline __attribute_const__ u32 msi_enabled_mask(u16 control) | |
| { | |
| return msi_mask((control >> 4) & 7); | |
| } | |
| /* | |
| * PCI 2.3 does not specify mask bits for each MSI interrupt. Attempting to | |
| * mask all MSI interrupts by clearing the MSI enable bit does not work | |
| * reliably as devices without an INTx disable bit will then generate a | |
| * level IRQ which will never be cleared. | |
| */ | |
| static u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) | |
| { | |
| u32 mask_bits = desc->masked; | |
| if (!desc->msi_attrib.maskbit) | |
| return 0; | |
| mask_bits &= ~mask; | |
| mask_bits |= flag; | |
| pci_write_config_dword(desc->dev, desc->mask_pos, mask_bits); | |
| return mask_bits; | |
| } | |
| static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) | |
| { | |
| desc->masked = __msi_mask_irq(desc, mask, flag); | |
| } | |
| /* | |
| * This internal function does not flush PCI writes to the device. | |
| * All users must ensure that they read from the device before either | |
| * assuming that the device state is up to date, or returning out of this | |
| * file. This saves a few milliseconds when initialising devices with lots | |
| * of MSI-X interrupts. | |
| */ | |
| static u32 __msix_mask_irq(struct msi_desc *desc, u32 flag) | |
| { | |
| u32 mask_bits = desc->masked; | |
| unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + | |
| PCI_MSIX_ENTRY_VECTOR_CTRL; | |
| mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT; | |
| if (flag) | |
| mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT; | |
| writel(mask_bits, desc->mask_base + offset); | |
| return mask_bits; | |
| } | |
| static void msix_mask_irq(struct msi_desc *desc, u32 flag) | |
| { | |
| desc->masked = __msix_mask_irq(desc, flag); | |
| } | |
| static void msi_set_mask_bit(struct irq_data *data, u32 flag) | |
| { | |
| struct msi_desc *desc = irq_data_get_msi(data); | |
| if (desc->msi_attrib.is_msix) { | |
| msix_mask_irq(desc, flag); | |
| readl(desc->mask_base); /* Flush write to device */ | |
| } else { | |
| unsigned offset = data->irq - desc->dev->irq; | |
| msi_mask_irq(desc, 1 << offset, flag << offset); | |
| } | |
| } | |
| void mask_msi_irq(struct irq_data *data) | |
| { | |
| msi_set_mask_bit(data, 1); | |
| } | |
| void unmask_msi_irq(struct irq_data *data) | |
| { | |
| msi_set_mask_bit(data, 0); | |
| } | |
| void __read_msi_msg(struct msi_desc *entry, struct msi_msg *msg) | |
| { | |
| BUG_ON(entry->dev->current_state != PCI_D0); | |
| if (entry->msi_attrib.is_msix) { | |
| void __iomem *base = entry->mask_base + | |
| entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; | |
| msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR); | |
| msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR); | |
| msg->data = readl(base + PCI_MSIX_ENTRY_DATA); | |
| } else { | |
| struct pci_dev *dev = entry->dev; | |
| int pos = entry->msi_attrib.pos; | |
| u16 data; | |
| pci_read_config_dword(dev, msi_lower_address_reg(pos), | |
| &msg->address_lo); | |
| if (entry->msi_attrib.is_64) { | |
| pci_read_config_dword(dev, msi_upper_address_reg(pos), | |
| &msg->address_hi); | |
| pci_read_config_word(dev, msi_data_reg(pos, 1), &data); | |
| } else { | |
| msg->address_hi = 0; | |
| pci_read_config_word(dev, msi_data_reg(pos, 0), &data); | |
| } | |
| msg->data = data; | |
| } | |
| } | |
| void read_msi_msg(unsigned int irq, struct msi_msg *msg) | |
| { | |
| struct msi_desc *entry = irq_get_msi_desc(irq); | |
| __read_msi_msg(entry, msg); | |
| } | |
| void __get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg) | |
| { | |
| /* Assert that the cache is valid, assuming that | |
| * valid messages are not all-zeroes. */ | |
| BUG_ON(!(entry->msg.address_hi | entry->msg.address_lo | | |
| entry->msg.data)); | |
| *msg = entry->msg; | |
| } | |
| void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg) | |
| { | |
| struct msi_desc *entry = irq_get_msi_desc(irq); | |
| __get_cached_msi_msg(entry, msg); | |
| } | |
| void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg) | |
| { | |
| if (entry->dev->current_state != PCI_D0) { | |
| /* Don't touch the hardware now */ | |
| } else if (entry->msi_attrib.is_msix) { | |
| void __iomem *base; | |
| base = entry->mask_base + | |
| entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; | |
| writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR); | |
| writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR); | |
| writel(msg->data, base + PCI_MSIX_ENTRY_DATA); | |
| } else { | |
| struct pci_dev *dev = entry->dev; | |
| int pos = entry->msi_attrib.pos; | |
| u16 msgctl; | |
| pci_read_config_word(dev, msi_control_reg(pos), &msgctl); | |
| msgctl &= ~PCI_MSI_FLAGS_QSIZE; | |
| msgctl |= entry->msi_attrib.multiple << 4; | |
| pci_write_config_word(dev, msi_control_reg(pos), msgctl); | |
| pci_write_config_dword(dev, msi_lower_address_reg(pos), | |
| msg->address_lo); | |
| if (entry->msi_attrib.is_64) { | |
| pci_write_config_dword(dev, msi_upper_address_reg(pos), | |
| msg->address_hi); | |
| pci_write_config_word(dev, msi_data_reg(pos, 1), | |
| msg->data); | |
| } else { | |
| pci_write_config_word(dev, msi_data_reg(pos, 0), | |
| msg->data); | |
| } | |
| } | |
| entry->msg = *msg; | |
| } | |
| void write_msi_msg(unsigned int irq, struct msi_msg *msg) | |
| { | |
| struct msi_desc *entry = irq_get_msi_desc(irq); | |
| __write_msi_msg(entry, msg); | |
| } | |
| static void free_msi_irqs(struct pci_dev *dev) | |
| { | |
| struct msi_desc *entry, *tmp; | |
| list_for_each_entry(entry, &dev->msi_list, list) { | |
| int i, nvec; | |
| if (!entry->irq) | |
| continue; | |
| nvec = 1 << entry->msi_attrib.multiple; | |
| for (i = 0; i < nvec; i++) | |
| BUG_ON(irq_has_action(entry->irq + i)); | |
| } | |
| arch_teardown_msi_irqs(dev); | |
| list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) { | |
| if (entry->msi_attrib.is_msix) { | |
| if (list_is_last(&entry->list, &dev->msi_list)) | |
| iounmap(entry->mask_base); | |
| } | |
| list_del(&entry->list); | |
| kfree(entry); | |
| } | |
| } | |
| static struct msi_desc *alloc_msi_entry(struct pci_dev *dev) | |
| { | |
| struct msi_desc *desc = kzalloc(sizeof(*desc), GFP_KERNEL); | |
| if (!desc) | |
| return NULL; | |
| INIT_LIST_HEAD(&desc->list); | |
| desc->dev = dev; | |
| return desc; | |
| } | |
| static void pci_intx_for_msi(struct pci_dev *dev, int enable) | |
| { | |
| if (!(dev->dev_flags & PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG)) | |
| pci_intx(dev, enable); | |
| } | |
| static void __pci_restore_msi_state(struct pci_dev *dev) | |
| { | |
| int pos; | |
| u16 control; | |
| struct msi_desc *entry; | |
| if (!dev->msi_enabled) | |
| return; | |
| entry = irq_get_msi_desc(dev->irq); | |
| pos = entry->msi_attrib.pos; | |
| pci_intx_for_msi(dev, 0); | |
| msi_set_enable(dev, pos, 0); | |
| write_msi_msg(dev->irq, &entry->msg); | |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); | |
| msi_mask_irq(entry, msi_capable_mask(control), entry->masked); | |
| control &= ~PCI_MSI_FLAGS_QSIZE; | |
| control |= (entry->msi_attrib.multiple << 4) | PCI_MSI_FLAGS_ENABLE; | |
| pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); | |
| } | |
| static void __pci_restore_msix_state(struct pci_dev *dev) | |
| { | |
| int pos; | |
| struct msi_desc *entry; | |
| u16 control; | |
| if (!dev->msix_enabled) | |
| return; | |
| BUG_ON(list_empty(&dev->msi_list)); | |
| entry = list_first_entry(&dev->msi_list, struct msi_desc, list); | |
| pos = entry->msi_attrib.pos; | |
| pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); | |
| /* route the table */ | |
| pci_intx_for_msi(dev, 0); | |
| control |= PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL; | |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); | |
| list_for_each_entry(entry, &dev->msi_list, list) { | |
| write_msi_msg(entry->irq, &entry->msg); | |
| msix_mask_irq(entry, entry->masked); | |
| } | |
| control &= ~PCI_MSIX_FLAGS_MASKALL; | |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); | |
| } | |
| void pci_restore_msi_state(struct pci_dev *dev) | |
| { | |
| __pci_restore_msi_state(dev); | |
| __pci_restore_msix_state(dev); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_restore_msi_state); | |
| /** | |
| * msi_capability_init - configure device's MSI capability structure | |
| * @dev: pointer to the pci_dev data structure of MSI device function | |
| * @nvec: number of interrupts to allocate | |
| * | |
| * Setup the MSI capability structure of the device with the requested | |
| * number of interrupts. A return value of zero indicates the successful | |
| * setup of an entry with the new MSI irq. A negative return value indicates | |
| * an error, and a positive return value indicates the number of interrupts | |
| * which could have been allocated. | |
| */ | |
| static int msi_capability_init(struct pci_dev *dev, int nvec) | |
| { | |
| struct msi_desc *entry; | |
| int pos, ret; | |
| u16 control; | |
| unsigned mask; | |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSI); | |
| msi_set_enable(dev, pos, 0); /* Disable MSI during set up */ | |
| pci_read_config_word(dev, msi_control_reg(pos), &control); | |
| /* MSI Entry Initialization */ | |
| entry = alloc_msi_entry(dev); | |
| if (!entry) | |
| return -ENOMEM; | |
| entry->msi_attrib.is_msix = 0; | |
| entry->msi_attrib.is_64 = is_64bit_address(control); | |
| entry->msi_attrib.entry_nr = 0; | |
| entry->msi_attrib.maskbit = is_mask_bit_support(control); | |
| entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */ | |
| entry->msi_attrib.pos = pos; | |
| entry->mask_pos = msi_mask_reg(pos, entry->msi_attrib.is_64); | |
| /* All MSIs are unmasked by default, Mask them all */ | |
| if (entry->msi_attrib.maskbit) | |
| pci_read_config_dword(dev, entry->mask_pos, &entry->masked); | |
| mask = msi_capable_mask(control); | |
| msi_mask_irq(entry, mask, mask); | |
| list_add_tail(&entry->list, &dev->msi_list); | |
| /* Configure MSI capability structure */ | |
| ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI); | |
| if (ret) { | |
| msi_mask_irq(entry, mask, ~mask); | |
| free_msi_irqs(dev); | |
| return ret; | |
| } | |
| /* Set MSI enabled bits */ | |
| pci_intx_for_msi(dev, 0); | |
| msi_set_enable(dev, pos, 1); | |
| dev->msi_enabled = 1; | |
| dev->irq = entry->irq; | |
| return 0; | |
| } | |
| static void __iomem *msix_map_region(struct pci_dev *dev, unsigned pos, | |
| unsigned nr_entries) | |
| { | |
| resource_size_t phys_addr; | |
| u32 table_offset; | |
| u8 bir; | |
| pci_read_config_dword(dev, msix_table_offset_reg(pos), &table_offset); | |
| bir = (u8)(table_offset & PCI_MSIX_FLAGS_BIRMASK); | |
| table_offset &= ~PCI_MSIX_FLAGS_BIRMASK; | |
| phys_addr = pci_resource_start(dev, bir) + table_offset; | |
| return ioremap_nocache(phys_addr, nr_entries * PCI_MSIX_ENTRY_SIZE); | |
| } | |
| static int msix_setup_entries(struct pci_dev *dev, unsigned pos, | |
| void __iomem *base, struct msix_entry *entries, | |
| int nvec) | |
| { | |
| struct msi_desc *entry; | |
| int i; | |
| for (i = 0; i < nvec; i++) { | |
| entry = alloc_msi_entry(dev); | |
| if (!entry) { | |
| if (!i) | |
| iounmap(base); | |
| else | |
| free_msi_irqs(dev); | |
| /* No enough memory. Don't try again */ | |
| return -ENOMEM; | |
| } | |
| entry->msi_attrib.is_msix = 1; | |
| entry->msi_attrib.is_64 = 1; | |
| entry->msi_attrib.entry_nr = entries[i].entry; | |
| entry->msi_attrib.default_irq = dev->irq; | |
| entry->msi_attrib.pos = pos; | |
| entry->mask_base = base; | |
| list_add_tail(&entry->list, &dev->msi_list); | |
| } | |
| return 0; | |
| } | |
| static void msix_program_entries(struct pci_dev *dev, | |
| struct msix_entry *entries) | |
| { | |
| struct msi_desc *entry; | |
| int i = 0; | |
| list_for_each_entry(entry, &dev->msi_list, list) { | |
| int offset = entries[i].entry * PCI_MSIX_ENTRY_SIZE + | |
| PCI_MSIX_ENTRY_VECTOR_CTRL; | |
| entries[i].vector = entry->irq; | |
| irq_set_msi_desc(entry->irq, entry); | |
| entry->masked = readl(entry->mask_base + offset); | |
| msix_mask_irq(entry, 1); | |
| i++; | |
| } | |
| } | |
| /** | |
| * msix_capability_init - configure device's MSI-X capability | |
| * @dev: pointer to the pci_dev data structure of MSI-X device function | |
| * @entries: pointer to an array of struct msix_entry entries | |
| * @nvec: number of @entries | |
| * | |
| * Setup the MSI-X capability structure of device function with a | |
| * single MSI-X irq. A return of zero indicates the successful setup of | |
| * requested MSI-X entries with allocated irqs or non-zero for otherwise. | |
| **/ | |
| static int msix_capability_init(struct pci_dev *dev, | |
| struct msix_entry *entries, int nvec) | |
| { | |
| int pos, ret; | |
| u16 control; | |
| void __iomem *base; | |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); | |
| pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); | |
| /* Ensure MSI-X is disabled while it is set up */ | |
| control &= ~PCI_MSIX_FLAGS_ENABLE; | |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); | |
| /* Request & Map MSI-X table region */ | |
| base = msix_map_region(dev, pos, multi_msix_capable(control)); | |
| if (!base) | |
| return -ENOMEM; | |
| ret = msix_setup_entries(dev, pos, base, entries, nvec); | |
| if (ret) | |
| return ret; | |
| ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX); | |
| if (ret) | |
| goto error; | |
| /* | |
| * Some devices require MSI-X to be enabled before we can touch the | |
| * MSI-X registers. We need to mask all the vectors to prevent | |
| * interrupts coming in before they're fully set up. | |
| */ | |
| control |= PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE; | |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); | |
| msix_program_entries(dev, entries); | |
| /* Set MSI-X enabled bits and unmask the function */ | |
| pci_intx_for_msi(dev, 0); | |
| dev->msix_enabled = 1; | |
| control &= ~PCI_MSIX_FLAGS_MASKALL; | |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); | |
| return 0; | |
| error: | |
| if (ret < 0) { | |
| /* | |
| * If we had some success, report the number of irqs | |
| * we succeeded in setting up. | |
| */ | |
| struct msi_desc *entry; | |
| int avail = 0; | |
| list_for_each_entry(entry, &dev->msi_list, list) { | |
| if (entry->irq != 0) | |
| avail++; | |
| } | |
| if (avail != 0) | |
| ret = avail; | |
| } | |
| free_msi_irqs(dev); | |
| return ret; | |
| } | |
| /** | |
| * pci_msi_check_device - check whether MSI may be enabled on a device | |
| * @dev: pointer to the pci_dev data structure of MSI device function | |
| * @nvec: how many MSIs have been requested ? | |
| * @type: are we checking for MSI or MSI-X ? | |
| * | |
| * Look at global flags, the device itself, and its parent busses | |
| * to determine if MSI/-X are supported for the device. If MSI/-X is | |
| * supported return 0, else return an error code. | |
| **/ | |
| static int pci_msi_check_device(struct pci_dev *dev, int nvec, int type) | |
| { | |
| struct pci_bus *bus; | |
| int ret; | |
| /* MSI must be globally enabled and supported by the device */ | |
| if (!pci_msi_enable || !dev || dev->no_msi) | |
| return -EINVAL; | |
| /* | |
| * You can't ask to have 0 or less MSIs configured. | |
| * a) it's stupid .. | |
| * b) the list manipulation code assumes nvec >= 1. | |
| */ | |
| if (nvec < 1) | |
| return -ERANGE; | |
| /* | |
| * Any bridge which does NOT route MSI transactions from its | |
| * secondary bus to its primary bus must set NO_MSI flag on | |
| * the secondary pci_bus. | |
| * We expect only arch-specific PCI host bus controller driver | |
| * or quirks for specific PCI bridges to be setting NO_MSI. | |
| */ | |
| for (bus = dev->bus; bus; bus = bus->parent) | |
| if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI) | |
| return -EINVAL; | |
| ret = arch_msi_check_device(dev, nvec, type); | |
| if (ret) | |
| return ret; | |
| if (!pci_find_capability(dev, type)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| /** | |
| * pci_enable_msi_block - configure device's MSI capability structure | |
| * @dev: device to configure | |
| * @nvec: number of interrupts to configure | |
| * | |
| * Allocate IRQs for a device with the MSI capability. | |
| * This function returns a negative errno if an error occurs. If it | |
| * is unable to allocate the number of interrupts requested, it returns | |
| * the number of interrupts it might be able to allocate. If it successfully | |
| * allocates at least the number of interrupts requested, it returns 0 and | |
| * updates the @dev's irq member to the lowest new interrupt number; the | |
| * other interrupt numbers allocated to this device are consecutive. | |
| */ | |
| int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec) | |
| { | |
| int status, pos, maxvec; | |
| u16 msgctl; | |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSI); | |
| if (!pos) | |
| return -EINVAL; | |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl); | |
| maxvec = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1); | |
| if (nvec > maxvec) | |
| return maxvec; | |
| status = pci_msi_check_device(dev, nvec, PCI_CAP_ID_MSI); | |
| if (status) | |
| return status; | |
| WARN_ON(!!dev->msi_enabled); | |
| /* Check whether driver already requested MSI-X irqs */ | |
| if (dev->msix_enabled) { | |
| dev_info(&dev->dev, "can't enable MSI " | |
| "(MSI-X already enabled)\n"); | |
| return -EINVAL; | |
| } | |
| status = msi_capability_init(dev, nvec); | |
| return status; | |
| } | |
| EXPORT_SYMBOL(pci_enable_msi_block); | |
| void pci_msi_shutdown(struct pci_dev *dev) | |
| { | |
| struct msi_desc *desc; | |
| u32 mask; | |
| u16 ctrl; | |
| unsigned pos; | |
| if (!pci_msi_enable || !dev || !dev->msi_enabled) | |
| return; | |
| BUG_ON(list_empty(&dev->msi_list)); | |
| desc = list_first_entry(&dev->msi_list, struct msi_desc, list); | |
| pos = desc->msi_attrib.pos; | |
| msi_set_enable(dev, pos, 0); | |
| pci_intx_for_msi(dev, 1); | |
| dev->msi_enabled = 0; | |
| /* Return the device with MSI unmasked as initial states */ | |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl); | |
| mask = msi_capable_mask(ctrl); | |
| /* Keep cached state to be restored */ | |
| __msi_mask_irq(desc, mask, ~mask); | |
| /* Restore dev->irq to its default pin-assertion irq */ | |
| dev->irq = desc->msi_attrib.default_irq; | |
| } | |
| void pci_disable_msi(struct pci_dev *dev) | |
| { | |
| if (!pci_msi_enable || !dev || !dev->msi_enabled) | |
| return; | |
| pci_msi_shutdown(dev); | |
| free_msi_irqs(dev); | |
| } | |
| EXPORT_SYMBOL(pci_disable_msi); | |
| /** | |
| * pci_msix_table_size - return the number of device's MSI-X table entries | |
| * @dev: pointer to the pci_dev data structure of MSI-X device function | |
| */ | |
| int pci_msix_table_size(struct pci_dev *dev) | |
| { | |
| int pos; | |
| u16 control; | |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); | |
| if (!pos) | |
| return 0; | |
| pci_read_config_word(dev, msi_control_reg(pos), &control); | |
| return multi_msix_capable(control); | |
| } | |
| /** | |
| * pci_enable_msix - configure device's MSI-X capability structure | |
| * @dev: pointer to the pci_dev data structure of MSI-X device function | |
| * @entries: pointer to an array of MSI-X entries | |
| * @nvec: number of MSI-X irqs requested for allocation by device driver | |
| * | |
| * Setup the MSI-X capability structure of device function with the number | |
| * of requested irqs upon its software driver call to request for | |
| * MSI-X mode enabled on its hardware device function. A return of zero | |
| * indicates the successful configuration of MSI-X capability structure | |
| * with new allocated MSI-X irqs. A return of < 0 indicates a failure. | |
| * Or a return of > 0 indicates that driver request is exceeding the number | |
| * of irqs or MSI-X vectors available. Driver should use the returned value to | |
| * re-send its request. | |
| **/ | |
| int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) | |
| { | |
| int status, nr_entries; | |
| int i, j; | |
| if (!entries) | |
| return -EINVAL; | |
| status = pci_msi_check_device(dev, nvec, PCI_CAP_ID_MSIX); | |
| if (status) | |
| return status; | |
| nr_entries = pci_msix_table_size(dev); | |
| if (nvec > nr_entries) | |
| return nr_entries; | |
| /* Check for any invalid entries */ | |
| for (i = 0; i < nvec; i++) { | |
| if (entries[i].entry >= nr_entries) | |
| return -EINVAL; /* invalid entry */ | |
| for (j = i + 1; j < nvec; j++) { | |
| if (entries[i].entry == entries[j].entry) | |
| return -EINVAL; /* duplicate entry */ | |
| } | |
| } | |
| WARN_ON(!!dev->msix_enabled); | |
| /* Check whether driver already requested for MSI irq */ | |
| if (dev->msi_enabled) { | |
| dev_info(&dev->dev, "can't enable MSI-X " | |
| "(MSI IRQ already assigned)\n"); | |
| return -EINVAL; | |
| } | |
| status = msix_capability_init(dev, entries, nvec); | |
| return status; | |
| } | |
| EXPORT_SYMBOL(pci_enable_msix); | |
| void pci_msix_shutdown(struct pci_dev *dev) | |
| { | |
| struct msi_desc *entry; | |
| if (!pci_msi_enable || !dev || !dev->msix_enabled) | |
| return; | |
| /* Return the device with MSI-X masked as initial states */ | |
| list_for_each_entry(entry, &dev->msi_list, list) { | |
| /* Keep cached states to be restored */ | |
| __msix_mask_irq(entry, 1); | |
| } | |
| msix_set_enable(dev, 0); | |
| pci_intx_for_msi(dev, 1); | |
| dev->msix_enabled = 0; | |
| } | |
| void pci_disable_msix(struct pci_dev *dev) | |
| { | |
| if (!pci_msi_enable || !dev || !dev->msix_enabled) | |
| return; | |
| pci_msix_shutdown(dev); | |
| free_msi_irqs(dev); | |
| } | |
| EXPORT_SYMBOL(pci_disable_msix); | |
| /** | |
| * msi_remove_pci_irq_vectors - reclaim MSI(X) irqs to unused state | |
| * @dev: pointer to the pci_dev data structure of MSI(X) device function | |
| * | |
| * Being called during hotplug remove, from which the device function | |
| * is hot-removed. All previous assigned MSI/MSI-X irqs, if | |
| * allocated for this device function, are reclaimed to unused state, | |
| * which may be used later on. | |
| **/ | |
| void msi_remove_pci_irq_vectors(struct pci_dev *dev) | |
| { | |
| if (!pci_msi_enable || !dev) | |
| return; | |
| if (dev->msi_enabled || dev->msix_enabled) | |
| free_msi_irqs(dev); | |
| } | |
| void pci_no_msi(void) | |
| { | |
| pci_msi_enable = 0; | |
| } | |
| /** | |
| * pci_msi_enabled - is MSI enabled? | |
| * | |
| * Returns true if MSI has not been disabled by the command-line option | |
| * pci=nomsi. | |
| **/ | |
| int pci_msi_enabled(void) | |
| { | |
| return pci_msi_enable; | |
| } | |
| EXPORT_SYMBOL(pci_msi_enabled); | |
| void pci_msi_init_pci_dev(struct pci_dev *dev) | |
| { | |
| int pos; | |
| INIT_LIST_HEAD(&dev->msi_list); | |
| /* Disable the msi hardware to avoid screaming interrupts | |
| * during boot. This is the power on reset default so | |
| * usually this should be a noop. | |
| */ | |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSI); | |
| if (pos) | |
| msi_set_enable(dev, pos, 0); | |
| msix_set_enable(dev, 0); | |
| } |