| /* | |
| * drivers/pci/pci-sysfs.c | |
| * | |
| * (C) Copyright 2002-2004 Greg Kroah-Hartman <greg@kroah.com> | |
| * (C) Copyright 2002-2004 IBM Corp. | |
| * (C) Copyright 2003 Matthew Wilcox | |
| * (C) Copyright 2003 Hewlett-Packard | |
| * (C) Copyright 2004 Jon Smirl <jonsmirl@yahoo.com> | |
| * (C) Copyright 2004 Silicon Graphics, Inc. Jesse Barnes <jbarnes@sgi.com> | |
| * | |
| * File attributes for PCI devices | |
| * | |
| * Modeled after usb's driverfs.c | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/pci.h> | |
| #include <linux/stat.h> | |
| #include <linux/topology.h> | |
| #include <linux/mm.h> | |
| #include <linux/fs.h> | |
| #include <linux/capability.h> | |
| #include <linux/security.h> | |
| #include <linux/pci-aspm.h> | |
| #include <linux/slab.h> | |
| #include "pci.h" | |
| static int sysfs_initialized; /* = 0 */ | |
| /* show configuration fields */ | |
| #define pci_config_attr(field, format_string) \ | |
| static ssize_t \ | |
| field##_show(struct device *dev, struct device_attribute *attr, char *buf) \ | |
| { \ | |
| struct pci_dev *pdev; \ | |
| \ | |
| pdev = to_pci_dev (dev); \ | |
| return sprintf (buf, format_string, pdev->field); \ | |
| } | |
| pci_config_attr(vendor, "0x%04x\n"); | |
| pci_config_attr(device, "0x%04x\n"); | |
| pci_config_attr(subsystem_vendor, "0x%04x\n"); | |
| pci_config_attr(subsystem_device, "0x%04x\n"); | |
| pci_config_attr(class, "0x%06x\n"); | |
| pci_config_attr(irq, "%u\n"); | |
| static ssize_t broken_parity_status_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| return sprintf (buf, "%u\n", pdev->broken_parity_status); | |
| } | |
| static ssize_t broken_parity_status_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| unsigned long val; | |
| if (strict_strtoul(buf, 0, &val) < 0) | |
| return -EINVAL; | |
| pdev->broken_parity_status = !!val; | |
| return count; | |
| } | |
| static ssize_t local_cpus_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| const struct cpumask *mask; | |
| int len; | |
| #ifdef CONFIG_NUMA | |
| mask = (dev_to_node(dev) == -1) ? cpu_online_mask : | |
| cpumask_of_node(dev_to_node(dev)); | |
| #else | |
| mask = cpumask_of_pcibus(to_pci_dev(dev)->bus); | |
| #endif | |
| len = cpumask_scnprintf(buf, PAGE_SIZE-2, mask); | |
| buf[len++] = '\n'; | |
| buf[len] = '\0'; | |
| return len; | |
| } | |
| static ssize_t local_cpulist_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| const struct cpumask *mask; | |
| int len; | |
| #ifdef CONFIG_NUMA | |
| mask = (dev_to_node(dev) == -1) ? cpu_online_mask : | |
| cpumask_of_node(dev_to_node(dev)); | |
| #else | |
| mask = cpumask_of_pcibus(to_pci_dev(dev)->bus); | |
| #endif | |
| len = cpulist_scnprintf(buf, PAGE_SIZE-2, mask); | |
| buf[len++] = '\n'; | |
| buf[len] = '\0'; | |
| return len; | |
| } | |
| /* | |
| * PCI Bus Class Devices | |
| */ | |
| static ssize_t pci_bus_show_cpuaffinity(struct device *dev, | |
| int type, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| int ret; | |
| const struct cpumask *cpumask; | |
| cpumask = cpumask_of_pcibus(to_pci_bus(dev)); | |
| ret = type ? | |
| cpulist_scnprintf(buf, PAGE_SIZE-2, cpumask) : | |
| cpumask_scnprintf(buf, PAGE_SIZE-2, cpumask); | |
| buf[ret++] = '\n'; | |
| buf[ret] = '\0'; | |
| return ret; | |
| } | |
| static inline ssize_t pci_bus_show_cpumaskaffinity(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return pci_bus_show_cpuaffinity(dev, 0, attr, buf); | |
| } | |
| static inline ssize_t pci_bus_show_cpulistaffinity(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return pci_bus_show_cpuaffinity(dev, 1, attr, buf); | |
| } | |
| /* show resources */ | |
| static ssize_t | |
| resource_show(struct device * dev, struct device_attribute *attr, char * buf) | |
| { | |
| struct pci_dev * pci_dev = to_pci_dev(dev); | |
| char * str = buf; | |
| int i; | |
| int max; | |
| resource_size_t start, end; | |
| if (pci_dev->subordinate) | |
| max = DEVICE_COUNT_RESOURCE; | |
| else | |
| max = PCI_BRIDGE_RESOURCES; | |
| for (i = 0; i < max; i++) { | |
| struct resource *res = &pci_dev->resource[i]; | |
| pci_resource_to_user(pci_dev, i, res, &start, &end); | |
| str += sprintf(str,"0x%016llx 0x%016llx 0x%016llx\n", | |
| (unsigned long long)start, | |
| (unsigned long long)end, | |
| (unsigned long long)res->flags); | |
| } | |
| return (str - buf); | |
| } | |
| static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct pci_dev *pci_dev = to_pci_dev(dev); | |
| return sprintf(buf, "pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x\n", | |
| pci_dev->vendor, pci_dev->device, | |
| pci_dev->subsystem_vendor, pci_dev->subsystem_device, | |
| (u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8), | |
| (u8)(pci_dev->class)); | |
| } | |
| static ssize_t is_enabled_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, | |
| size_t count) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| unsigned long val; | |
| ssize_t result = strict_strtoul(buf, 0, &val); | |
| if (result < 0) | |
| return result; | |
| /* this can crash the machine when done on the "wrong" device */ | |
| if (!capable(CAP_SYS_ADMIN)) | |
| return -EPERM; | |
| if (!val) { | |
| if (pci_is_enabled(pdev)) | |
| pci_disable_device(pdev); | |
| else | |
| result = -EIO; | |
| } else | |
| result = pci_enable_device(pdev); | |
| return result < 0 ? result : count; | |
| } | |
| static ssize_t is_enabled_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct pci_dev *pdev; | |
| pdev = to_pci_dev (dev); | |
| return sprintf (buf, "%u\n", atomic_read(&pdev->enable_cnt)); | |
| } | |
| #ifdef CONFIG_NUMA | |
| static ssize_t | |
| numa_node_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| return sprintf (buf, "%d\n", dev->numa_node); | |
| } | |
| #endif | |
| static ssize_t | |
| dma_mask_bits_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| return sprintf (buf, "%d\n", fls64(pdev->dma_mask)); | |
| } | |
| static ssize_t | |
| consistent_dma_mask_bits_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf (buf, "%d\n", fls64(dev->coherent_dma_mask)); | |
| } | |
| static ssize_t | |
| msi_bus_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| if (!pdev->subordinate) | |
| return 0; | |
| return sprintf (buf, "%u\n", | |
| !(pdev->subordinate->bus_flags & PCI_BUS_FLAGS_NO_MSI)); | |
| } | |
| static ssize_t | |
| msi_bus_store(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| unsigned long val; | |
| if (strict_strtoul(buf, 0, &val) < 0) | |
| return -EINVAL; | |
| /* bad things may happen if the no_msi flag is changed | |
| * while some drivers are loaded */ | |
| if (!capable(CAP_SYS_ADMIN)) | |
| return -EPERM; | |
| /* Maybe pci devices without subordinate busses shouldn't even have this | |
| * attribute in the first place? */ | |
| if (!pdev->subordinate) | |
| return count; | |
| /* Is the flag going to change, or keep the value it already had? */ | |
| if (!(pdev->subordinate->bus_flags & PCI_BUS_FLAGS_NO_MSI) ^ | |
| !!val) { | |
| pdev->subordinate->bus_flags ^= PCI_BUS_FLAGS_NO_MSI; | |
| dev_warn(&pdev->dev, "forced subordinate bus to%s support MSI," | |
| " bad things could happen\n", val ? "" : " not"); | |
| } | |
| return count; | |
| } | |
| #ifdef CONFIG_HOTPLUG | |
| static DEFINE_MUTEX(pci_remove_rescan_mutex); | |
| static ssize_t bus_rescan_store(struct bus_type *bus, const char *buf, | |
| size_t count) | |
| { | |
| unsigned long val; | |
| struct pci_bus *b = NULL; | |
| if (strict_strtoul(buf, 0, &val) < 0) | |
| return -EINVAL; | |
| if (val) { | |
| mutex_lock(&pci_remove_rescan_mutex); | |
| while ((b = pci_find_next_bus(b)) != NULL) | |
| pci_rescan_bus(b); | |
| mutex_unlock(&pci_remove_rescan_mutex); | |
| } | |
| return count; | |
| } | |
| struct bus_attribute pci_bus_attrs[] = { | |
| __ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, bus_rescan_store), | |
| __ATTR_NULL | |
| }; | |
| static ssize_t | |
| dev_rescan_store(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| unsigned long val; | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| if (strict_strtoul(buf, 0, &val) < 0) | |
| return -EINVAL; | |
| if (val) { | |
| mutex_lock(&pci_remove_rescan_mutex); | |
| pci_rescan_bus(pdev->bus); | |
| mutex_unlock(&pci_remove_rescan_mutex); | |
| } | |
| return count; | |
| } | |
| static void remove_callback(struct device *dev) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| mutex_lock(&pci_remove_rescan_mutex); | |
| pci_remove_bus_device(pdev); | |
| mutex_unlock(&pci_remove_rescan_mutex); | |
| } | |
| static ssize_t | |
| remove_store(struct device *dev, struct device_attribute *dummy, | |
| const char *buf, size_t count) | |
| { | |
| int ret = 0; | |
| unsigned long val; | |
| if (strict_strtoul(buf, 0, &val) < 0) | |
| return -EINVAL; | |
| /* An attribute cannot be unregistered by one of its own methods, | |
| * so we have to use this roundabout approach. | |
| */ | |
| if (val) | |
| ret = device_schedule_callback(dev, remove_callback); | |
| if (ret) | |
| count = ret; | |
| return count; | |
| } | |
| static ssize_t | |
| dev_bus_rescan_store(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| unsigned long val; | |
| struct pci_bus *bus = to_pci_bus(dev); | |
| if (strict_strtoul(buf, 0, &val) < 0) | |
| return -EINVAL; | |
| if (val) { | |
| mutex_lock(&pci_remove_rescan_mutex); | |
| pci_rescan_bus(bus); | |
| mutex_unlock(&pci_remove_rescan_mutex); | |
| } | |
| return count; | |
| } | |
| #endif | |
| struct device_attribute pci_dev_attrs[] = { | |
| __ATTR_RO(resource), | |
| __ATTR_RO(vendor), | |
| __ATTR_RO(device), | |
| __ATTR_RO(subsystem_vendor), | |
| __ATTR_RO(subsystem_device), | |
| __ATTR_RO(class), | |
| __ATTR_RO(irq), | |
| __ATTR_RO(local_cpus), | |
| __ATTR_RO(local_cpulist), | |
| __ATTR_RO(modalias), | |
| #ifdef CONFIG_NUMA | |
| __ATTR_RO(numa_node), | |
| #endif | |
| __ATTR_RO(dma_mask_bits), | |
| __ATTR_RO(consistent_dma_mask_bits), | |
| __ATTR(enable, 0600, is_enabled_show, is_enabled_store), | |
| __ATTR(broken_parity_status,(S_IRUGO|S_IWUSR), | |
| broken_parity_status_show,broken_parity_status_store), | |
| __ATTR(msi_bus, 0644, msi_bus_show, msi_bus_store), | |
| #ifdef CONFIG_HOTPLUG | |
| __ATTR(remove, (S_IWUSR|S_IWGRP), NULL, remove_store), | |
| __ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_rescan_store), | |
| #endif | |
| __ATTR_NULL, | |
| }; | |
| struct device_attribute pcibus_dev_attrs[] = { | |
| #ifdef CONFIG_HOTPLUG | |
| __ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_bus_rescan_store), | |
| #endif | |
| __ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpumaskaffinity, NULL), | |
| __ATTR(cpulistaffinity, S_IRUGO, pci_bus_show_cpulistaffinity, NULL), | |
| __ATTR_NULL, | |
| }; | |
| static ssize_t | |
| boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| return sprintf(buf, "%u\n", | |
| !!(pdev->resource[PCI_ROM_RESOURCE].flags & | |
| IORESOURCE_ROM_SHADOW)); | |
| } | |
| struct device_attribute vga_attr = __ATTR_RO(boot_vga); | |
| static ssize_t | |
| pci_read_config(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *bin_attr, | |
| char *buf, loff_t off, size_t count) | |
| { | |
| struct pci_dev *dev = to_pci_dev(container_of(kobj,struct device,kobj)); | |
| unsigned int size = 64; | |
| loff_t init_off = off; | |
| u8 *data = (u8*) buf; | |
| /* Several chips lock up trying to read undefined config space */ | |
| if (security_capable(&init_user_ns, filp->f_cred, CAP_SYS_ADMIN) == 0) { | |
| size = dev->cfg_size; | |
| } else if (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { | |
| size = 128; | |
| } | |
| if (off > size) | |
| return 0; | |
| if (off + count > size) { | |
| size -= off; | |
| count = size; | |
| } else { | |
| size = count; | |
| } | |
| if ((off & 1) && size) { | |
| u8 val; | |
| pci_user_read_config_byte(dev, off, &val); | |
| data[off - init_off] = val; | |
| off++; | |
| size--; | |
| } | |
| if ((off & 3) && size > 2) { | |
| u16 val; | |
| pci_user_read_config_word(dev, off, &val); | |
| data[off - init_off] = val & 0xff; | |
| data[off - init_off + 1] = (val >> 8) & 0xff; | |
| off += 2; | |
| size -= 2; | |
| } | |
| while (size > 3) { | |
| u32 val; | |
| pci_user_read_config_dword(dev, off, &val); | |
| data[off - init_off] = val & 0xff; | |
| data[off - init_off + 1] = (val >> 8) & 0xff; | |
| data[off - init_off + 2] = (val >> 16) & 0xff; | |
| data[off - init_off + 3] = (val >> 24) & 0xff; | |
| off += 4; | |
| size -= 4; | |
| } | |
| if (size >= 2) { | |
| u16 val; | |
| pci_user_read_config_word(dev, off, &val); | |
| data[off - init_off] = val & 0xff; | |
| data[off - init_off + 1] = (val >> 8) & 0xff; | |
| off += 2; | |
| size -= 2; | |
| } | |
| if (size > 0) { | |
| u8 val; | |
| pci_user_read_config_byte(dev, off, &val); | |
| data[off - init_off] = val; | |
| off++; | |
| --size; | |
| } | |
| return count; | |
| } | |
| static ssize_t | |
| pci_write_config(struct file* filp, struct kobject *kobj, | |
| struct bin_attribute *bin_attr, | |
| char *buf, loff_t off, size_t count) | |
| { | |
| struct pci_dev *dev = to_pci_dev(container_of(kobj,struct device,kobj)); | |
| unsigned int size = count; | |
| loff_t init_off = off; | |
| u8 *data = (u8*) buf; | |
| if (off > dev->cfg_size) | |
| return 0; | |
| if (off + count > dev->cfg_size) { | |
| size = dev->cfg_size - off; | |
| count = size; | |
| } | |
| if ((off & 1) && size) { | |
| pci_user_write_config_byte(dev, off, data[off - init_off]); | |
| off++; | |
| size--; | |
| } | |
| if ((off & 3) && size > 2) { | |
| u16 val = data[off - init_off]; | |
| val |= (u16) data[off - init_off + 1] << 8; | |
| pci_user_write_config_word(dev, off, val); | |
| off += 2; | |
| size -= 2; | |
| } | |
| while (size > 3) { | |
| u32 val = data[off - init_off]; | |
| val |= (u32) data[off - init_off + 1] << 8; | |
| val |= (u32) data[off - init_off + 2] << 16; | |
| val |= (u32) data[off - init_off + 3] << 24; | |
| pci_user_write_config_dword(dev, off, val); | |
| off += 4; | |
| size -= 4; | |
| } | |
| if (size >= 2) { | |
| u16 val = data[off - init_off]; | |
| val |= (u16) data[off - init_off + 1] << 8; | |
| pci_user_write_config_word(dev, off, val); | |
| off += 2; | |
| size -= 2; | |
| } | |
| if (size) { | |
| pci_user_write_config_byte(dev, off, data[off - init_off]); | |
| off++; | |
| --size; | |
| } | |
| return count; | |
| } | |
| static ssize_t | |
| read_vpd_attr(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *bin_attr, | |
| char *buf, loff_t off, size_t count) | |
| { | |
| struct pci_dev *dev = | |
| to_pci_dev(container_of(kobj, struct device, kobj)); | |
| if (off > bin_attr->size) | |
| count = 0; | |
| else if (count > bin_attr->size - off) | |
| count = bin_attr->size - off; | |
| return pci_read_vpd(dev, off, count, buf); | |
| } | |
| static ssize_t | |
| write_vpd_attr(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *bin_attr, | |
| char *buf, loff_t off, size_t count) | |
| { | |
| struct pci_dev *dev = | |
| to_pci_dev(container_of(kobj, struct device, kobj)); | |
| if (off > bin_attr->size) | |
| count = 0; | |
| else if (count > bin_attr->size - off) | |
| count = bin_attr->size - off; | |
| return pci_write_vpd(dev, off, count, buf); | |
| } | |
| #ifdef HAVE_PCI_LEGACY | |
| /** | |
| * pci_read_legacy_io - read byte(s) from legacy I/O port space | |
| * @filp: open sysfs file | |
| * @kobj: kobject corresponding to file to read from | |
| * @bin_attr: struct bin_attribute for this file | |
| * @buf: buffer to store results | |
| * @off: offset into legacy I/O port space | |
| * @count: number of bytes to read | |
| * | |
| * Reads 1, 2, or 4 bytes from legacy I/O port space using an arch specific | |
| * callback routine (pci_legacy_read). | |
| */ | |
| static ssize_t | |
| pci_read_legacy_io(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *bin_attr, | |
| char *buf, loff_t off, size_t count) | |
| { | |
| struct pci_bus *bus = to_pci_bus(container_of(kobj, | |
| struct device, | |
| kobj)); | |
| /* Only support 1, 2 or 4 byte accesses */ | |
| if (count != 1 && count != 2 && count != 4) | |
| return -EINVAL; | |
| return pci_legacy_read(bus, off, (u32 *)buf, count); | |
| } | |
| /** | |
| * pci_write_legacy_io - write byte(s) to legacy I/O port space | |
| * @filp: open sysfs file | |
| * @kobj: kobject corresponding to file to read from | |
| * @bin_attr: struct bin_attribute for this file | |
| * @buf: buffer containing value to be written | |
| * @off: offset into legacy I/O port space | |
| * @count: number of bytes to write | |
| * | |
| * Writes 1, 2, or 4 bytes from legacy I/O port space using an arch specific | |
| * callback routine (pci_legacy_write). | |
| */ | |
| static ssize_t | |
| pci_write_legacy_io(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *bin_attr, | |
| char *buf, loff_t off, size_t count) | |
| { | |
| struct pci_bus *bus = to_pci_bus(container_of(kobj, | |
| struct device, | |
| kobj)); | |
| /* Only support 1, 2 or 4 byte accesses */ | |
| if (count != 1 && count != 2 && count != 4) | |
| return -EINVAL; | |
| return pci_legacy_write(bus, off, *(u32 *)buf, count); | |
| } | |
| /** | |
| * pci_mmap_legacy_mem - map legacy PCI memory into user memory space | |
| * @filp: open sysfs file | |
| * @kobj: kobject corresponding to device to be mapped | |
| * @attr: struct bin_attribute for this file | |
| * @vma: struct vm_area_struct passed to mmap | |
| * | |
| * Uses an arch specific callback, pci_mmap_legacy_mem_page_range, to mmap | |
| * legacy memory space (first meg of bus space) into application virtual | |
| * memory space. | |
| */ | |
| static int | |
| pci_mmap_legacy_mem(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *attr, | |
| struct vm_area_struct *vma) | |
| { | |
| struct pci_bus *bus = to_pci_bus(container_of(kobj, | |
| struct device, | |
| kobj)); | |
| return pci_mmap_legacy_page_range(bus, vma, pci_mmap_mem); | |
| } | |
| /** | |
| * pci_mmap_legacy_io - map legacy PCI IO into user memory space | |
| * @filp: open sysfs file | |
| * @kobj: kobject corresponding to device to be mapped | |
| * @attr: struct bin_attribute for this file | |
| * @vma: struct vm_area_struct passed to mmap | |
| * | |
| * Uses an arch specific callback, pci_mmap_legacy_io_page_range, to mmap | |
| * legacy IO space (first meg of bus space) into application virtual | |
| * memory space. Returns -ENOSYS if the operation isn't supported | |
| */ | |
| static int | |
| pci_mmap_legacy_io(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *attr, | |
| struct vm_area_struct *vma) | |
| { | |
| struct pci_bus *bus = to_pci_bus(container_of(kobj, | |
| struct device, | |
| kobj)); | |
| return pci_mmap_legacy_page_range(bus, vma, pci_mmap_io); | |
| } | |
| /** | |
| * pci_adjust_legacy_attr - adjustment of legacy file attributes | |
| * @b: bus to create files under | |
| * @mmap_type: I/O port or memory | |
| * | |
| * Stub implementation. Can be overridden by arch if necessary. | |
| */ | |
| void __weak | |
| pci_adjust_legacy_attr(struct pci_bus *b, enum pci_mmap_state mmap_type) | |
| { | |
| return; | |
| } | |
| /** | |
| * pci_create_legacy_files - create legacy I/O port and memory files | |
| * @b: bus to create files under | |
| * | |
| * Some platforms allow access to legacy I/O port and ISA memory space on | |
| * a per-bus basis. This routine creates the files and ties them into | |
| * their associated read, write and mmap files from pci-sysfs.c | |
| * | |
| * On error unwind, but don't propagate the error to the caller | |
| * as it is ok to set up the PCI bus without these files. | |
| */ | |
| void pci_create_legacy_files(struct pci_bus *b) | |
| { | |
| int error; | |
| b->legacy_io = kzalloc(sizeof(struct bin_attribute) * 2, | |
| GFP_ATOMIC); | |
| if (!b->legacy_io) | |
| goto kzalloc_err; | |
| sysfs_bin_attr_init(b->legacy_io); | |
| b->legacy_io->attr.name = "legacy_io"; | |
| b->legacy_io->size = 0xffff; | |
| b->legacy_io->attr.mode = S_IRUSR | S_IWUSR; | |
| b->legacy_io->read = pci_read_legacy_io; | |
| b->legacy_io->write = pci_write_legacy_io; | |
| b->legacy_io->mmap = pci_mmap_legacy_io; | |
| pci_adjust_legacy_attr(b, pci_mmap_io); | |
| error = device_create_bin_file(&b->dev, b->legacy_io); | |
| if (error) | |
| goto legacy_io_err; | |
| /* Allocated above after the legacy_io struct */ | |
| b->legacy_mem = b->legacy_io + 1; | |
| sysfs_bin_attr_init(b->legacy_mem); | |
| b->legacy_mem->attr.name = "legacy_mem"; | |
| b->legacy_mem->size = 1024*1024; | |
| b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR; | |
| b->legacy_mem->mmap = pci_mmap_legacy_mem; | |
| pci_adjust_legacy_attr(b, pci_mmap_mem); | |
| error = device_create_bin_file(&b->dev, b->legacy_mem); | |
| if (error) | |
| goto legacy_mem_err; | |
| return; | |
| legacy_mem_err: | |
| device_remove_bin_file(&b->dev, b->legacy_io); | |
| legacy_io_err: | |
| kfree(b->legacy_io); | |
| b->legacy_io = NULL; | |
| kzalloc_err: | |
| printk(KERN_WARNING "pci: warning: could not create legacy I/O port " | |
| "and ISA memory resources to sysfs\n"); | |
| return; | |
| } | |
| void pci_remove_legacy_files(struct pci_bus *b) | |
| { | |
| if (b->legacy_io) { | |
| device_remove_bin_file(&b->dev, b->legacy_io); | |
| device_remove_bin_file(&b->dev, b->legacy_mem); | |
| kfree(b->legacy_io); /* both are allocated here */ | |
| } | |
| } | |
| #endif /* HAVE_PCI_LEGACY */ | |
| #ifdef HAVE_PCI_MMAP | |
| int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma, | |
| enum pci_mmap_api mmap_api) | |
| { | |
| unsigned long nr, start, size, pci_start; | |
| if (pci_resource_len(pdev, resno) == 0) | |
| return 0; | |
| nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; | |
| start = vma->vm_pgoff; | |
| size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1; | |
| pci_start = (mmap_api == PCI_MMAP_PROCFS) ? | |
| pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0; | |
| if (start >= pci_start && start < pci_start + size && | |
| start + nr <= pci_start + size) | |
| return 1; | |
| return 0; | |
| } | |
| /** | |
| * pci_mmap_resource - map a PCI resource into user memory space | |
| * @kobj: kobject for mapping | |
| * @attr: struct bin_attribute for the file being mapped | |
| * @vma: struct vm_area_struct passed into the mmap | |
| * @write_combine: 1 for write_combine mapping | |
| * | |
| * Use the regular PCI mapping routines to map a PCI resource into userspace. | |
| */ | |
| static int | |
| pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, | |
| struct vm_area_struct *vma, int write_combine) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(container_of(kobj, | |
| struct device, kobj)); | |
| struct resource *res = attr->private; | |
| enum pci_mmap_state mmap_type; | |
| resource_size_t start, end; | |
| int i; | |
| for (i = 0; i < PCI_ROM_RESOURCE; i++) | |
| if (res == &pdev->resource[i]) | |
| break; | |
| if (i >= PCI_ROM_RESOURCE) | |
| return -ENODEV; | |
| if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) { | |
| WARN(1, "process \"%s\" tried to map 0x%08lx bytes " | |
| "at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n", | |
| current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff, | |
| pci_name(pdev), i, | |
| (u64)pci_resource_start(pdev, i), | |
| (u64)pci_resource_len(pdev, i)); | |
| return -EINVAL; | |
| } | |
| /* pci_mmap_page_range() expects the same kind of entry as coming | |
| * from /proc/bus/pci/ which is a "user visible" value. If this is | |
| * different from the resource itself, arch will do necessary fixup. | |
| */ | |
| pci_resource_to_user(pdev, i, res, &start, &end); | |
| vma->vm_pgoff += start >> PAGE_SHIFT; | |
| mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io; | |
| if (res->flags & IORESOURCE_MEM && iomem_is_exclusive(start)) | |
| return -EINVAL; | |
| return pci_mmap_page_range(pdev, vma, mmap_type, write_combine); | |
| } | |
| static int | |
| pci_mmap_resource_uc(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *attr, | |
| struct vm_area_struct *vma) | |
| { | |
| return pci_mmap_resource(kobj, attr, vma, 0); | |
| } | |
| static int | |
| pci_mmap_resource_wc(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *attr, | |
| struct vm_area_struct *vma) | |
| { | |
| return pci_mmap_resource(kobj, attr, vma, 1); | |
| } | |
| static ssize_t | |
| pci_resource_io(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *attr, char *buf, | |
| loff_t off, size_t count, bool write) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(container_of(kobj, | |
| struct device, kobj)); | |
| struct resource *res = attr->private; | |
| unsigned long port = off; | |
| int i; | |
| for (i = 0; i < PCI_ROM_RESOURCE; i++) | |
| if (res == &pdev->resource[i]) | |
| break; | |
| if (i >= PCI_ROM_RESOURCE) | |
| return -ENODEV; | |
| port += pci_resource_start(pdev, i); | |
| if (port > pci_resource_end(pdev, i)) | |
| return 0; | |
| if (port + count - 1 > pci_resource_end(pdev, i)) | |
| return -EINVAL; | |
| switch (count) { | |
| case 1: | |
| if (write) | |
| outb(*(u8 *)buf, port); | |
| else | |
| *(u8 *)buf = inb(port); | |
| return 1; | |
| case 2: | |
| if (write) | |
| outw(*(u16 *)buf, port); | |
| else | |
| *(u16 *)buf = inw(port); | |
| return 2; | |
| case 4: | |
| if (write) | |
| outl(*(u32 *)buf, port); | |
| else | |
| *(u32 *)buf = inl(port); | |
| return 4; | |
| } | |
| return -EINVAL; | |
| } | |
| static ssize_t | |
| pci_read_resource_io(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *attr, char *buf, | |
| loff_t off, size_t count) | |
| { | |
| return pci_resource_io(filp, kobj, attr, buf, off, count, false); | |
| } | |
| static ssize_t | |
| pci_write_resource_io(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *attr, char *buf, | |
| loff_t off, size_t count) | |
| { | |
| return pci_resource_io(filp, kobj, attr, buf, off, count, true); | |
| } | |
| /** | |
| * pci_remove_resource_files - cleanup resource files | |
| * @pdev: dev to cleanup | |
| * | |
| * If we created resource files for @pdev, remove them from sysfs and | |
| * free their resources. | |
| */ | |
| static void | |
| pci_remove_resource_files(struct pci_dev *pdev) | |
| { | |
| int i; | |
| for (i = 0; i < PCI_ROM_RESOURCE; i++) { | |
| struct bin_attribute *res_attr; | |
| res_attr = pdev->res_attr[i]; | |
| if (res_attr) { | |
| sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); | |
| kfree(res_attr); | |
| } | |
| res_attr = pdev->res_attr_wc[i]; | |
| if (res_attr) { | |
| sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); | |
| kfree(res_attr); | |
| } | |
| } | |
| } | |
| static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine) | |
| { | |
| /* allocate attribute structure, piggyback attribute name */ | |
| int name_len = write_combine ? 13 : 10; | |
| struct bin_attribute *res_attr; | |
| int retval; | |
| res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC); | |
| if (res_attr) { | |
| char *res_attr_name = (char *)(res_attr + 1); | |
| sysfs_bin_attr_init(res_attr); | |
| if (write_combine) { | |
| pdev->res_attr_wc[num] = res_attr; | |
| sprintf(res_attr_name, "resource%d_wc", num); | |
| res_attr->mmap = pci_mmap_resource_wc; | |
| } else { | |
| pdev->res_attr[num] = res_attr; | |
| sprintf(res_attr_name, "resource%d", num); | |
| res_attr->mmap = pci_mmap_resource_uc; | |
| } | |
| if (pci_resource_flags(pdev, num) & IORESOURCE_IO) { | |
| res_attr->read = pci_read_resource_io; | |
| res_attr->write = pci_write_resource_io; | |
| } | |
| res_attr->attr.name = res_attr_name; | |
| res_attr->attr.mode = S_IRUSR | S_IWUSR; | |
| res_attr->size = pci_resource_len(pdev, num); | |
| res_attr->private = &pdev->resource[num]; | |
| retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); | |
| } else | |
| retval = -ENOMEM; | |
| return retval; | |
| } | |
| /** | |
| * pci_create_resource_files - create resource files in sysfs for @dev | |
| * @pdev: dev in question | |
| * | |
| * Walk the resources in @pdev creating files for each resource available. | |
| */ | |
| static int pci_create_resource_files(struct pci_dev *pdev) | |
| { | |
| int i; | |
| int retval; | |
| /* Expose the PCI resources from this device as files */ | |
| for (i = 0; i < PCI_ROM_RESOURCE; i++) { | |
| /* skip empty resources */ | |
| if (!pci_resource_len(pdev, i)) | |
| continue; | |
| retval = pci_create_attr(pdev, i, 0); | |
| /* for prefetchable resources, create a WC mappable file */ | |
| if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH) | |
| retval = pci_create_attr(pdev, i, 1); | |
| if (retval) { | |
| pci_remove_resource_files(pdev); | |
| return retval; | |
| } | |
| } | |
| return 0; | |
| } | |
| #else /* !HAVE_PCI_MMAP */ | |
| int __weak pci_create_resource_files(struct pci_dev *dev) { return 0; } | |
| void __weak pci_remove_resource_files(struct pci_dev *dev) { return; } | |
| #endif /* HAVE_PCI_MMAP */ | |
| /** | |
| * pci_write_rom - used to enable access to the PCI ROM display | |
| * @filp: sysfs file | |
| * @kobj: kernel object handle | |
| * @bin_attr: struct bin_attribute for this file | |
| * @buf: user input | |
| * @off: file offset | |
| * @count: number of byte in input | |
| * | |
| * writing anything except 0 enables it | |
| */ | |
| static ssize_t | |
| pci_write_rom(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *bin_attr, | |
| char *buf, loff_t off, size_t count) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj)); | |
| if ((off == 0) && (*buf == '0') && (count == 2)) | |
| pdev->rom_attr_enabled = 0; | |
| else | |
| pdev->rom_attr_enabled = 1; | |
| return count; | |
| } | |
| /** | |
| * pci_read_rom - read a PCI ROM | |
| * @filp: sysfs file | |
| * @kobj: kernel object handle | |
| * @bin_attr: struct bin_attribute for this file | |
| * @buf: where to put the data we read from the ROM | |
| * @off: file offset | |
| * @count: number of bytes to read | |
| * | |
| * Put @count bytes starting at @off into @buf from the ROM in the PCI | |
| * device corresponding to @kobj. | |
| */ | |
| static ssize_t | |
| pci_read_rom(struct file *filp, struct kobject *kobj, | |
| struct bin_attribute *bin_attr, | |
| char *buf, loff_t off, size_t count) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj)); | |
| void __iomem *rom; | |
| size_t size; | |
| if (!pdev->rom_attr_enabled) | |
| return -EINVAL; | |
| rom = pci_map_rom(pdev, &size); /* size starts out as PCI window size */ | |
| if (!rom || !size) | |
| return -EIO; | |
| if (off >= size) | |
| count = 0; | |
| else { | |
| if (off + count > size) | |
| count = size - off; | |
| memcpy_fromio(buf, rom + off, count); | |
| } | |
| pci_unmap_rom(pdev, rom); | |
| return count; | |
| } | |
| static struct bin_attribute pci_config_attr = { | |
| .attr = { | |
| .name = "config", | |
| .mode = S_IRUGO | S_IWUSR, | |
| }, | |
| .size = PCI_CFG_SPACE_SIZE, | |
| .read = pci_read_config, | |
| .write = pci_write_config, | |
| }; | |
| static struct bin_attribute pcie_config_attr = { | |
| .attr = { | |
| .name = "config", | |
| .mode = S_IRUGO | S_IWUSR, | |
| }, | |
| .size = PCI_CFG_SPACE_EXP_SIZE, | |
| .read = pci_read_config, | |
| .write = pci_write_config, | |
| }; | |
| int __attribute__ ((weak)) pcibios_add_platform_entries(struct pci_dev *dev) | |
| { | |
| return 0; | |
| } | |
| static ssize_t reset_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, | |
| size_t count) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| unsigned long val; | |
| ssize_t result = strict_strtoul(buf, 0, &val); | |
| if (result < 0) | |
| return result; | |
| if (val != 1) | |
| return -EINVAL; | |
| result = pci_reset_function(pdev); | |
| if (result < 0) | |
| return result; | |
| return count; | |
| } | |
| static struct device_attribute reset_attr = __ATTR(reset, 0200, NULL, reset_store); | |
| static int pci_create_capabilities_sysfs(struct pci_dev *dev) | |
| { | |
| int retval; | |
| struct bin_attribute *attr; | |
| /* If the device has VPD, try to expose it in sysfs. */ | |
| if (dev->vpd) { | |
| attr = kzalloc(sizeof(*attr), GFP_ATOMIC); | |
| if (!attr) | |
| return -ENOMEM; | |
| sysfs_bin_attr_init(attr); | |
| attr->size = dev->vpd->len; | |
| attr->attr.name = "vpd"; | |
| attr->attr.mode = S_IRUSR | S_IWUSR; | |
| attr->read = read_vpd_attr; | |
| attr->write = write_vpd_attr; | |
| retval = sysfs_create_bin_file(&dev->dev.kobj, attr); | |
| if (retval) { | |
| kfree(attr); | |
| return retval; | |
| } | |
| dev->vpd->attr = attr; | |
| } | |
| /* Active State Power Management */ | |
| pcie_aspm_create_sysfs_dev_files(dev); | |
| if (!pci_probe_reset_function(dev)) { | |
| retval = device_create_file(&dev->dev, &reset_attr); | |
| if (retval) | |
| goto error; | |
| dev->reset_fn = 1; | |
| } | |
| return 0; | |
| error: | |
| pcie_aspm_remove_sysfs_dev_files(dev); | |
| if (dev->vpd && dev->vpd->attr) { | |
| sysfs_remove_bin_file(&dev->dev.kobj, dev->vpd->attr); | |
| kfree(dev->vpd->attr); | |
| } | |
| return retval; | |
| } | |
| int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) | |
| { | |
| int retval; | |
| int rom_size = 0; | |
| struct bin_attribute *attr; | |
| if (!sysfs_initialized) | |
| return -EACCES; | |
| if (pdev->cfg_size < PCI_CFG_SPACE_EXP_SIZE) | |
| retval = sysfs_create_bin_file(&pdev->dev.kobj, &pci_config_attr); | |
| else | |
| retval = sysfs_create_bin_file(&pdev->dev.kobj, &pcie_config_attr); | |
| if (retval) | |
| goto err; | |
| retval = pci_create_resource_files(pdev); | |
| if (retval) | |
| goto err_config_file; | |
| if (pci_resource_len(pdev, PCI_ROM_RESOURCE)) | |
| rom_size = pci_resource_len(pdev, PCI_ROM_RESOURCE); | |
| else if (pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW) | |
| rom_size = 0x20000; | |
| /* If the device has a ROM, try to expose it in sysfs. */ | |
| if (rom_size) { | |
| attr = kzalloc(sizeof(*attr), GFP_ATOMIC); | |
| if (!attr) { | |
| retval = -ENOMEM; | |
| goto err_resource_files; | |
| } | |
| sysfs_bin_attr_init(attr); | |
| attr->size = rom_size; | |
| attr->attr.name = "rom"; | |
| attr->attr.mode = S_IRUSR | S_IWUSR; | |
| attr->read = pci_read_rom; | |
| attr->write = pci_write_rom; | |
| retval = sysfs_create_bin_file(&pdev->dev.kobj, attr); | |
| if (retval) { | |
| kfree(attr); | |
| goto err_resource_files; | |
| } | |
| pdev->rom_attr = attr; | |
| } | |
| if ((pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA) { | |
| retval = device_create_file(&pdev->dev, &vga_attr); | |
| if (retval) | |
| goto err_rom_file; | |
| } | |
| /* add platform-specific attributes */ | |
| retval = pcibios_add_platform_entries(pdev); | |
| if (retval) | |
| goto err_vga_file; | |
| /* add sysfs entries for various capabilities */ | |
| retval = pci_create_capabilities_sysfs(pdev); | |
| if (retval) | |
| goto err_vga_file; | |
| pci_create_firmware_label_files(pdev); | |
| return 0; | |
| err_vga_file: | |
| if ((pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA) | |
| device_remove_file(&pdev->dev, &vga_attr); | |
| err_rom_file: | |
| if (rom_size) { | |
| sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr); | |
| kfree(pdev->rom_attr); | |
| pdev->rom_attr = NULL; | |
| } | |
| err_resource_files: | |
| pci_remove_resource_files(pdev); | |
| err_config_file: | |
| if (pdev->cfg_size < PCI_CFG_SPACE_EXP_SIZE) | |
| sysfs_remove_bin_file(&pdev->dev.kobj, &pci_config_attr); | |
| else | |
| sysfs_remove_bin_file(&pdev->dev.kobj, &pcie_config_attr); | |
| err: | |
| return retval; | |
| } | |
| static void pci_remove_capabilities_sysfs(struct pci_dev *dev) | |
| { | |
| if (dev->vpd && dev->vpd->attr) { | |
| sysfs_remove_bin_file(&dev->dev.kobj, dev->vpd->attr); | |
| kfree(dev->vpd->attr); | |
| } | |
| pcie_aspm_remove_sysfs_dev_files(dev); | |
| if (dev->reset_fn) { | |
| device_remove_file(&dev->dev, &reset_attr); | |
| dev->reset_fn = 0; | |
| } | |
| } | |
| /** | |
| * pci_remove_sysfs_dev_files - cleanup PCI specific sysfs files | |
| * @pdev: device whose entries we should free | |
| * | |
| * Cleanup when @pdev is removed from sysfs. | |
| */ | |
| void pci_remove_sysfs_dev_files(struct pci_dev *pdev) | |
| { | |
| int rom_size = 0; | |
| if (!sysfs_initialized) | |
| return; | |
| pci_remove_capabilities_sysfs(pdev); | |
| if (pdev->cfg_size < PCI_CFG_SPACE_EXP_SIZE) | |
| sysfs_remove_bin_file(&pdev->dev.kobj, &pci_config_attr); | |
| else | |
| sysfs_remove_bin_file(&pdev->dev.kobj, &pcie_config_attr); | |
| pci_remove_resource_files(pdev); | |
| if (pci_resource_len(pdev, PCI_ROM_RESOURCE)) | |
| rom_size = pci_resource_len(pdev, PCI_ROM_RESOURCE); | |
| else if (pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW) | |
| rom_size = 0x20000; | |
| if (rom_size && pdev->rom_attr) { | |
| sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr); | |
| kfree(pdev->rom_attr); | |
| } | |
| pci_remove_firmware_label_files(pdev); | |
| } | |
| static int __init pci_sysfs_init(void) | |
| { | |
| struct pci_dev *pdev = NULL; | |
| int retval; | |
| sysfs_initialized = 1; | |
| for_each_pci_dev(pdev) { | |
| retval = pci_create_sysfs_dev_files(pdev); | |
| if (retval) { | |
| pci_dev_put(pdev); | |
| return retval; | |
| } | |
| } | |
| return 0; | |
| } | |
| late_initcall(pci_sysfs_init); |