| menuconfig POWER_SUPPLY | |
| tristate "Power supply class support" | |
| help | |
| Say Y here to enable power supply class support. This allows | |
| power supply (batteries, AC, USB) monitoring by userspace | |
| via sysfs and uevent (if available) and/or APM kernel interface | |
| (if selected below). | |
| if POWER_SUPPLY | |
| config POWER_SUPPLY_DEBUG | |
| bool "Power supply debug" | |
| help | |
| Say Y here to enable debugging messages for power supply class | |
| and drivers. | |
| config PDA_POWER | |
| tristate "Generic PDA/phone power driver" | |
| depends on !S390 | |
| help | |
| Say Y here to enable generic power driver for PDAs and phones with | |
| one or two external power supplies (AC/USB) connected to main and | |
| backup batteries, and optional builtin charger. | |
| config APM_POWER | |
| tristate "APM emulation for class batteries" | |
| depends on APM_EMULATION | |
| help | |
| Say Y here to enable support APM status emulation using | |
| battery class devices. | |
| config MAX8925_POWER | |
| tristate "MAX8925 battery charger support" | |
| depends on MFD_MAX8925 | |
| help | |
| Say Y here to enable support for the battery charger in the Maxim | |
| MAX8925 PMIC. | |
| config WM831X_BACKUP | |
| tristate "WM831X backup battery charger support" | |
| depends on MFD_WM831X | |
| help | |
| Say Y here to enable support for the backup battery charger | |
| in the Wolfson Microelectronics WM831x PMICs. | |
| config WM831X_POWER | |
| tristate "WM831X PMU support" | |
| depends on MFD_WM831X | |
| help | |
| Say Y here to enable support for the power management unit | |
| provided by Wolfson Microelectronics WM831x PMICs. | |
| config WM8350_POWER | |
| tristate "WM8350 PMU support" | |
| depends on MFD_WM8350 | |
| help | |
| Say Y here to enable support for the power management unit | |
| provided by the Wolfson Microelectronics WM8350 PMIC. | |
| config TEST_POWER | |
| tristate "Test power driver" | |
| help | |
| This driver is used for testing. It's safe to say M here. | |
| config BATTERY_DS2760 | |
| tristate "DS2760 battery driver (HP iPAQ & others)" | |
| depends on W1 && W1_SLAVE_DS2760 | |
| help | |
| Say Y here to enable support for batteries with ds2760 chip. | |
| config BATTERY_DS2780 | |
| tristate "DS2780 battery driver" | |
| select W1 | |
| select W1_SLAVE_DS2780 | |
| help | |
| Say Y here to enable support for batteries with ds2780 chip. | |
| config BATTERY_DS2782 | |
| tristate "DS2782/DS2786 standalone gas-gauge" | |
| depends on I2C | |
| help | |
| Say Y here to enable support for the DS2782/DS2786 standalone battery | |
| gas-gauge. | |
| config BATTERY_PMU | |
| tristate "Apple PMU battery" | |
| depends on PPC32 && ADB_PMU | |
| help | |
| Say Y here to expose battery information on Apple machines | |
| through the generic battery class. | |
| config BATTERY_OLPC | |
| tristate "One Laptop Per Child battery" | |
| depends on X86_32 && OLPC | |
| help | |
| Say Y to enable support for the battery on the OLPC laptop. | |
| config BATTERY_TOSA | |
| tristate "Sharp SL-6000 (tosa) battery" | |
| depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX | |
| help | |
| Say Y to enable support for the battery on the Sharp Zaurus | |
| SL-6000 (tosa) models. | |
| config BATTERY_COLLIE | |
| tristate "Sharp SL-5500 (collie) battery" | |
| depends on SA1100_COLLIE && MCP_UCB1200 | |
| help | |
| Say Y to enable support for the battery on the Sharp Zaurus | |
| SL-5500 (collie) models. | |
| config BATTERY_WM97XX | |
| bool "WM97xx generic battery driver" | |
| depends on TOUCHSCREEN_WM97XX=y | |
| help | |
| Say Y to enable support for battery measured by WM97xx aux port. | |
| config BATTERY_BQ20Z75 | |
| tristate "TI BQ20z75 gas gauge" | |
| depends on I2C | |
| help | |
| Say Y to include support for TI BQ20z75 SBS-compliant | |
| gas gauge and protection IC. | |
| config BATTERY_BQ27x00 | |
| tristate "BQ27x00 battery driver" | |
| help | |
| Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips. | |
| config BATTERY_BQ27X00_I2C | |
| bool "BQ27200/BQ27500 support" | |
| depends on BATTERY_BQ27x00 | |
| depends on I2C | |
| default y | |
| help | |
| Say Y here to enable support for batteries with BQ27x00 (I2C) chips. | |
| config BATTERY_BQ27X00_PLATFORM | |
| bool "BQ27000 support" | |
| depends on BATTERY_BQ27x00 | |
| default y | |
| help | |
| Say Y here to enable support for batteries with BQ27000 (HDQ) chips. | |
| config BATTERY_DA9030 | |
| tristate "DA9030 battery driver" | |
| depends on PMIC_DA903X | |
| help | |
| Say Y here to enable support for batteries charger integrated into | |
| DA9030 PMIC. | |
| config BATTERY_MAX17040 | |
| tristate "Maxim MAX17040 Fuel Gauge" | |
| depends on I2C | |
| help | |
| MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries | |
| in handheld and portable equipment. The MAX17040 is configured | |
| to operate with a single lithium cell | |
| config BATTERY_MAX17042 | |
| tristate "Maxim MAX17042/8997/8966 Fuel Gauge" | |
| depends on I2C | |
| help | |
| MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries | |
| in handheld and portable equipment. The MAX17042 is configured | |
| to operate with a single lithium cell. MAX8997 and MAX8966 are | |
| multi-function devices that include fuel gauages that are compatible | |
| with MAX17042. | |
| config BATTERY_Z2 | |
| tristate "Z2 battery driver" | |
| depends on I2C && MACH_ZIPIT2 | |
| help | |
| Say Y to include support for the battery on the Zipit Z2. | |
| config BATTERY_S3C_ADC | |
| tristate "Battery driver for Samsung ADC based monitoring" | |
| depends on S3C_ADC | |
| help | |
| Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery | |
| config CHARGER_PCF50633 | |
| tristate "NXP PCF50633 MBC" | |
| depends on MFD_PCF50633 | |
| help | |
| Say Y to include support for NXP PCF50633 Main Battery Charger. | |
| config BATTERY_JZ4740 | |
| tristate "Ingenic JZ4740 battery" | |
| depends on MACH_JZ4740 | |
| depends on MFD_JZ4740_ADC | |
| help | |
| Say Y to enable support for the battery on Ingenic JZ4740 based | |
| boards. | |
| This driver can be build as a module. If so, the module will be | |
| called jz4740-battery. | |
| config BATTERY_INTEL_MID | |
| tristate "Battery driver for Intel MID platforms" | |
| depends on INTEL_SCU_IPC && SPI | |
| help | |
| Say Y here to enable the battery driver on Intel MID | |
| platforms. | |
| config CHARGER_ISP1704 | |
| tristate "ISP1704 USB Charger Detection" | |
| depends on USB_OTG_UTILS | |
| help | |
| Say Y to enable support for USB Charger Detection with | |
| ISP1707/ISP1704 USB transceivers. | |
| config CHARGER_MAX8903 | |
| tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power" | |
| depends on GENERIC_HARDIRQS | |
| help | |
| Say Y to enable support for the MAX8903 DC-DC charger and sysfs. | |
| The driver supports controlling charger-enable and current-limit | |
| pins based on the status of charger connections with interrupt | |
| handlers. | |
| config CHARGER_TWL4030 | |
| tristate "OMAP TWL4030 BCI charger driver" | |
| depends on TWL4030_CORE | |
| help | |
| Say Y here to enable support for TWL4030 Battery Charge Interface. | |
| config CHARGER_GPIO | |
| tristate "GPIO charger" | |
| depends on GPIOLIB | |
| help | |
| Say Y to include support for chargers which report their online status | |
| through a GPIO pin. | |
| This driver can be build as a module. If so, the module will be | |
| called gpio-charger. | |
| endif # POWER_SUPPLY |