| menuconfig REGULATOR | |
| bool "Voltage and Current Regulator Support" | |
| help | |
| Generic Voltage and Current Regulator support. | |
| This framework is designed to provide a generic interface to voltage | |
| and current regulators within the Linux kernel. It's intended to | |
| provide voltage and current control to client or consumer drivers and | |
| also provide status information to user space applications through a | |
| sysfs interface. | |
| The intention is to allow systems to dynamically control regulator | |
| output in order to save power and prolong battery life. This applies | |
| to both voltage regulators (where voltage output is controllable) and | |
| current sinks (where current output is controllable). | |
| This framework safely compiles out if not selected so that client | |
| drivers can still be used in systems with no software controllable | |
| regulators. | |
| If unsure, say no. | |
| if REGULATOR | |
| config REGULATOR_DEBUG | |
| bool "Regulator debug support" | |
| help | |
| Say yes here to enable debugging support. | |
| config REGULATOR_DUMMY | |
| bool "Provide a dummy regulator if regulator lookups fail" | |
| help | |
| If this option is enabled then when a regulator lookup fails | |
| and the board has not specified that it has provided full | |
| constraints then the regulator core will provide an always | |
| enabled dummy regulator will be provided, allowing consumer | |
| drivers to continue. | |
| A warning will be generated when this substitution is done. | |
| config REGULATOR_FIXED_VOLTAGE | |
| tristate "Fixed voltage regulator support" | |
| help | |
| This driver provides support for fixed voltage regulators, | |
| useful for systems which use a combination of software | |
| managed regulators and simple non-configurable regulators. | |
| config REGULATOR_VIRTUAL_CONSUMER | |
| tristate "Virtual regulator consumer support" | |
| help | |
| This driver provides a virtual consumer for the voltage and | |
| current regulator API which provides sysfs controls for | |
| configuring the supplies requested. This is mainly useful | |
| for test purposes. | |
| If unsure, say no. | |
| config REGULATOR_USERSPACE_CONSUMER | |
| tristate "Userspace regulator consumer support" | |
| help | |
| There are some classes of devices that are controlled entirely | |
| from user space. Userspace consumer driver provides ability to | |
| control power supplies for such devices. | |
| If unsure, say no. | |
| config REGULATOR_BQ24022 | |
| tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" | |
| help | |
| This driver controls a TI bq24022 Charger attached via | |
| GPIOs. The provided current regulator can enable/disable | |
| charging select between 100 mA and 500 mA charging current | |
| limit. | |
| config REGULATOR_MAX1586 | |
| tristate "Maxim 1586/1587 voltage regulator" | |
| depends on I2C | |
| help | |
| This driver controls a Maxim 1586 or 1587 voltage output | |
| regulator via I2C bus. The provided regulator is suitable | |
| for PXA27x chips to control VCC_CORE and VCC_USIM voltages. | |
| config REGULATOR_MAX8649 | |
| tristate "Maxim 8649 voltage regulator" | |
| depends on I2C | |
| help | |
| This driver controls a Maxim 8649 voltage output regulator via | |
| I2C bus. | |
| config REGULATOR_MAX8660 | |
| tristate "Maxim 8660/8661 voltage regulator" | |
| depends on I2C | |
| help | |
| This driver controls a Maxim 8660/8661 voltage output | |
| regulator via I2C bus. | |
| config REGULATOR_MAX8925 | |
| tristate "Maxim MAX8925 Power Management IC" | |
| depends on MFD_MAX8925 | |
| help | |
| Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. | |
| config REGULATOR_MAX8952 | |
| tristate "Maxim MAX8952 Power Management IC" | |
| depends on I2C | |
| help | |
| This driver controls a Maxim 8952 voltage output regulator | |
| via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS | |
| modes ranging from 0.77V to 1.40V by 0.01V steps. | |
| config REGULATOR_MAX8997 | |
| tristate "Maxim 8997/8966 regulator" | |
| depends on MFD_MAX8997 | |
| help | |
| This driver controls a Maxim 8997/8966 regulator | |
| via I2C bus. The provided regulator is suitable for S5PC110, | |
| S5PV210, and Exynos-4 chips to control VCC_CORE and | |
| VCC_USIM voltages. | |
| config REGULATOR_MAX8998 | |
| tristate "Maxim 8998 voltage regulator" | |
| depends on MFD_MAX8998 | |
| help | |
| This driver controls a Maxim 8998 voltage output regulator | |
| via I2C bus. The provided regulator is suitable for S3C6410 | |
| and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. | |
| config REGULATOR_TWL4030 | |
| bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" | |
| depends on TWL4030_CORE | |
| help | |
| This driver supports the voltage regulators provided by | |
| this family of companion chips. | |
| config REGULATOR_WM831X | |
| tristate "Wolfson Microelcronics WM831x PMIC regulators" | |
| depends on MFD_WM831X | |
| help | |
| Support the voltage and current regulators of the WM831x series | |
| of PMIC devices. | |
| config REGULATOR_WM8350 | |
| tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" | |
| depends on MFD_WM8350 | |
| help | |
| This driver provides support for the voltage and current regulators | |
| of the WM8350 AudioPlus PMIC. | |
| config REGULATOR_WM8400 | |
| tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" | |
| depends on MFD_WM8400 | |
| help | |
| This driver provides support for the voltage regulators of the | |
| WM8400 AudioPlus PMIC. | |
| config REGULATOR_WM8994 | |
| tristate "Wolfson Microelectronics WM8994 CODEC" | |
| depends on MFD_WM8994 | |
| help | |
| This driver provides support for the voltage regulators on the | |
| WM8994 CODEC. | |
| config REGULATOR_DA903X | |
| tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" | |
| depends on PMIC_DA903X | |
| help | |
| Say y here to support the BUCKs and LDOs regulators found on | |
| Dialog Semiconductor DA9030/DA9034 PMIC. | |
| config REGULATOR_PCF50633 | |
| tristate "PCF50633 regulator driver" | |
| depends on MFD_PCF50633 | |
| help | |
| Say Y here to support the voltage regulators and convertors | |
| on PCF50633 | |
| config REGULATOR_LP3971 | |
| tristate "National Semiconductors LP3971 PMIC regulator driver" | |
| depends on I2C | |
| help | |
| Say Y here to support the voltage regulators and convertors | |
| on National Semiconductors LP3971 PMIC | |
| config REGULATOR_LP3972 | |
| tristate "National Semiconductors LP3972 PMIC regulator driver" | |
| depends on I2C | |
| help | |
| Say Y here to support the voltage regulators and convertors | |
| on National Semiconductors LP3972 PMIC | |
| config REGULATOR_PCAP | |
| tristate "PCAP2 regulator driver" | |
| depends on EZX_PCAP | |
| help | |
| This driver provides support for the voltage regulators of the | |
| PCAP2 PMIC. | |
| config REGULATOR_MC13XXX_CORE | |
| tristate | |
| config REGULATOR_MC13783 | |
| tristate "Support regulators on Freescale MC13783 PMIC" | |
| depends on MFD_MC13783 | |
| select REGULATOR_MC13XXX_CORE | |
| help | |
| Say y here to support the regulators found on the Freescale MC13783 | |
| PMIC. | |
| config REGULATOR_MC13892 | |
| tristate "Support regulators on Freescale MC13892 PMIC" | |
| depends on MFD_MC13XXX | |
| select REGULATOR_MC13XXX_CORE | |
| help | |
| Say y here to support the regulators found on the Freescale MC13892 | |
| PMIC. | |
| config REGULATOR_AB3100 | |
| tristate "ST-Ericsson AB3100 Regulator functions" | |
| depends on AB3100_CORE | |
| default y if AB3100_CORE | |
| help | |
| These regulators correspond to functionality in the | |
| AB3100 analog baseband dealing with power regulators | |
| for the system. | |
| config REGULATOR_TPS6105X | |
| tristate "TI TPS6105X Power regulators" | |
| depends on TPS6105X | |
| default y if TPS6105X | |
| help | |
| This driver supports TPS61050/TPS61052 voltage regulator chips. | |
| It is a single boost converter primarily for white LEDs and | |
| audio amplifiers. | |
| config REGULATOR_TPS65023 | |
| tristate "TI TPS65023 Power regulators" | |
| depends on I2C | |
| help | |
| This driver supports TPS65023 voltage regulator chips. TPS65023 provides | |
| three step-down converters and two general-purpose LDO voltage regulators. | |
| It supports TI's software based Class-2 SmartReflex implementation. | |
| config REGULATOR_TPS6507X | |
| tristate "TI TPS6507X Power regulators" | |
| depends on I2C | |
| help | |
| This driver supports TPS6507X voltage regulator chips. TPS6507X provides | |
| three step-down converters and two general-purpose LDO voltage regulators. | |
| It supports TI's software based Class-2 SmartReflex implementation. | |
| config REGULATOR_88PM8607 | |
| bool "Marvell 88PM8607 Power regulators" | |
| depends on MFD_88PM860X=y | |
| help | |
| This driver supports 88PM8607 voltage regulator chips. | |
| config REGULATOR_ISL6271A | |
| tristate "Intersil ISL6271A Power regulator" | |
| depends on I2C | |
| help | |
| This driver supports ISL6271A voltage regulator chip. | |
| config REGULATOR_AD5398 | |
| tristate "Analog Devices AD5398/AD5821 regulators" | |
| depends on I2C | |
| help | |
| This driver supports AD5398 and AD5821 current regulator chips. | |
| If building into module, its name is ad5398.ko. | |
| config REGULATOR_AB8500 | |
| bool "ST-Ericsson AB8500 Power Regulators" | |
| depends on AB8500_CORE | |
| help | |
| This driver supports the regulators found on the ST-Ericsson mixed | |
| signal AB8500 PMIC | |
| config REGULATOR_DB8500_PRCMU | |
| bool "ST-Ericsson DB8500 Voltage Domain Regulators" | |
| depends on MFD_DB8500_PRCMU | |
| help | |
| This driver supports the voltage domain regulators controlled by the | |
| DB8500 PRCMU | |
| config REGULATOR_TPS6586X | |
| tristate "TI TPS6586X Power regulators" | |
| depends on MFD_TPS6586X | |
| help | |
| This driver supports TPS6586X voltage regulator chips. | |
| config REGULATOR_TPS6524X | |
| tristate "TI TPS6524X Power regulators" | |
| depends on SPI | |
| help | |
| This driver supports TPS6524X voltage regulator chips. TPS6524X | |
| provides three step-down converters and two general-purpose LDO | |
| voltage regulators. This device is interfaced using a customized | |
| serial interface currently supported on the sequencer serial | |
| port controller. | |
| config REGULATOR_TPS65910 | |
| tristate "TI TPS65910 Power Regulator" | |
| depends on MFD_TPS65910 | |
| help | |
| This driver supports TPS65910 voltage regulator chips. | |
| endif | |