| /* | |
| * This file is provided under a dual BSD/GPLv2 license. When using or | |
| * redistributing this file, you may do so under either license. | |
| * | |
| * GPL LICENSE SUMMARY | |
| * | |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of version 2 of the GNU General Public License as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
| * The full GNU General Public License is included in this distribution | |
| * in the file called LICENSE.GPL. | |
| * | |
| * BSD LICENSE | |
| * | |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in | |
| * the documentation and/or other materials provided with the | |
| * distribution. | |
| * * Neither the name of Intel Corporation nor the names of its | |
| * contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/firmware.h> | |
| #include <linux/efi.h> | |
| #include <asm/string.h> | |
| #include "isci.h" | |
| #include "task.h" | |
| #include "probe_roms.h" | |
| static struct scsi_transport_template *isci_transport_template; | |
| static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = { | |
| { PCI_VDEVICE(INTEL, 0x1D61),}, | |
| { PCI_VDEVICE(INTEL, 0x1D63),}, | |
| { PCI_VDEVICE(INTEL, 0x1D65),}, | |
| { PCI_VDEVICE(INTEL, 0x1D67),}, | |
| { PCI_VDEVICE(INTEL, 0x1D69),}, | |
| { PCI_VDEVICE(INTEL, 0x1D6B),}, | |
| { PCI_VDEVICE(INTEL, 0x1D60),}, | |
| { PCI_VDEVICE(INTEL, 0x1D62),}, | |
| { PCI_VDEVICE(INTEL, 0x1D64),}, | |
| { PCI_VDEVICE(INTEL, 0x1D66),}, | |
| { PCI_VDEVICE(INTEL, 0x1D68),}, | |
| { PCI_VDEVICE(INTEL, 0x1D6A),}, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(pci, isci_id_table); | |
| /* linux isci specific settings */ | |
| unsigned char no_outbound_task_to = 20; | |
| module_param(no_outbound_task_to, byte, 0); | |
| MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)"); | |
| u16 ssp_max_occ_to = 20; | |
| module_param(ssp_max_occ_to, ushort, 0); | |
| MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)"); | |
| u16 stp_max_occ_to = 5; | |
| module_param(stp_max_occ_to, ushort, 0); | |
| MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)"); | |
| u16 ssp_inactive_to = 5; | |
| module_param(ssp_inactive_to, ushort, 0); | |
| MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)"); | |
| u16 stp_inactive_to = 5; | |
| module_param(stp_inactive_to, ushort, 0); | |
| MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)"); | |
| unsigned char phy_gen = 3; | |
| module_param(phy_gen, byte, 0); | |
| MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)"); | |
| unsigned char max_concurr_spinup = 1; | |
| module_param(max_concurr_spinup, byte, 0); | |
| MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); | |
| static struct scsi_host_template isci_sht = { | |
| .module = THIS_MODULE, | |
| .name = DRV_NAME, | |
| .proc_name = DRV_NAME, | |
| .queuecommand = sas_queuecommand, | |
| .target_alloc = sas_target_alloc, | |
| .slave_configure = sas_slave_configure, | |
| .slave_destroy = sas_slave_destroy, | |
| .scan_finished = isci_host_scan_finished, | |
| .scan_start = isci_host_scan_start, | |
| .change_queue_depth = sas_change_queue_depth, | |
| .change_queue_type = sas_change_queue_type, | |
| .bios_param = sas_bios_param, | |
| .can_queue = ISCI_CAN_QUEUE_VAL, | |
| .cmd_per_lun = 1, | |
| .this_id = -1, | |
| .sg_tablesize = SG_ALL, | |
| .max_sectors = SCSI_DEFAULT_MAX_SECTORS, | |
| .use_clustering = ENABLE_CLUSTERING, | |
| .eh_device_reset_handler = sas_eh_device_reset_handler, | |
| .eh_bus_reset_handler = isci_bus_reset_handler, | |
| .slave_alloc = sas_slave_alloc, | |
| .target_destroy = sas_target_destroy, | |
| .ioctl = sas_ioctl, | |
| }; | |
| static struct sas_domain_function_template isci_transport_ops = { | |
| /* The class calls these to notify the LLDD of an event. */ | |
| .lldd_port_formed = isci_port_formed, | |
| .lldd_port_deformed = isci_port_deformed, | |
| /* The class calls these when a device is found or gone. */ | |
| .lldd_dev_found = isci_remote_device_found, | |
| .lldd_dev_gone = isci_remote_device_gone, | |
| .lldd_execute_task = isci_task_execute_task, | |
| /* Task Management Functions. Must be called from process context. */ | |
| .lldd_abort_task = isci_task_abort_task, | |
| .lldd_abort_task_set = isci_task_abort_task_set, | |
| .lldd_clear_aca = isci_task_clear_aca, | |
| .lldd_clear_task_set = isci_task_clear_task_set, | |
| .lldd_I_T_nexus_reset = isci_task_I_T_nexus_reset, | |
| .lldd_lu_reset = isci_task_lu_reset, | |
| .lldd_query_task = isci_task_query_task, | |
| /* Port and Adapter management */ | |
| .lldd_clear_nexus_port = isci_task_clear_nexus_port, | |
| .lldd_clear_nexus_ha = isci_task_clear_nexus_ha, | |
| /* Phy management */ | |
| .lldd_control_phy = isci_phy_control, | |
| }; | |
| /****************************************************************************** | |
| * P R O T E C T E D M E T H O D S | |
| ******************************************************************************/ | |
| /** | |
| * isci_register_sas_ha() - This method initializes various lldd | |
| * specific members of the sas_ha struct and calls the libsas | |
| * sas_register_ha() function. | |
| * @isci_host: This parameter specifies the lldd specific wrapper for the | |
| * libsas sas_ha struct. | |
| * | |
| * This method returns an error code indicating sucess or failure. The user | |
| * should check for possible memory allocation error return otherwise, a zero | |
| * indicates success. | |
| */ | |
| static int isci_register_sas_ha(struct isci_host *isci_host) | |
| { | |
| int i; | |
| struct sas_ha_struct *sas_ha = &(isci_host->sas_ha); | |
| struct asd_sas_phy **sas_phys; | |
| struct asd_sas_port **sas_ports; | |
| sas_phys = devm_kzalloc(&isci_host->pdev->dev, | |
| SCI_MAX_PHYS * sizeof(void *), | |
| GFP_KERNEL); | |
| if (!sas_phys) | |
| return -ENOMEM; | |
| sas_ports = devm_kzalloc(&isci_host->pdev->dev, | |
| SCI_MAX_PORTS * sizeof(void *), | |
| GFP_KERNEL); | |
| if (!sas_ports) | |
| return -ENOMEM; | |
| /*----------------- Libsas Initialization Stuff---------------------- | |
| * Set various fields in the sas_ha struct: | |
| */ | |
| sas_ha->sas_ha_name = DRV_NAME; | |
| sas_ha->lldd_module = THIS_MODULE; | |
| sas_ha->sas_addr = &isci_host->phys[0].sas_addr[0]; | |
| /* set the array of phy and port structs. */ | |
| for (i = 0; i < SCI_MAX_PHYS; i++) { | |
| sas_phys[i] = &isci_host->phys[i].sas_phy; | |
| sas_ports[i] = &isci_host->ports[i].sas_port; | |
| } | |
| sas_ha->sas_phy = sas_phys; | |
| sas_ha->sas_port = sas_ports; | |
| sas_ha->num_phys = SCI_MAX_PHYS; | |
| sas_ha->lldd_queue_size = ISCI_CAN_QUEUE_VAL; | |
| sas_ha->lldd_max_execute_num = 1; | |
| sas_ha->strict_wide_ports = 1; | |
| sas_register_ha(sas_ha); | |
| return 0; | |
| } | |
| static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); | |
| struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); | |
| struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha); | |
| return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id); | |
| } | |
| static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL); | |
| static void isci_unregister(struct isci_host *isci_host) | |
| { | |
| struct Scsi_Host *shost; | |
| if (!isci_host) | |
| return; | |
| shost = isci_host->shost; | |
| device_remove_file(&shost->shost_dev, &dev_attr_isci_id); | |
| sas_unregister_ha(&isci_host->sas_ha); | |
| sas_remove_host(isci_host->shost); | |
| scsi_remove_host(isci_host->shost); | |
| scsi_host_put(isci_host->shost); | |
| } | |
| static int __devinit isci_pci_init(struct pci_dev *pdev) | |
| { | |
| int err, bar_num, bar_mask = 0; | |
| void __iomem * const *iomap; | |
| err = pcim_enable_device(pdev); | |
| if (err) { | |
| dev_err(&pdev->dev, | |
| "failed enable PCI device %s!\n", | |
| pci_name(pdev)); | |
| return err; | |
| } | |
| for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++) | |
| bar_mask |= 1 << (bar_num * 2); | |
| err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME); | |
| if (err) | |
| return err; | |
| iomap = pcim_iomap_table(pdev); | |
| if (!iomap) | |
| return -ENOMEM; | |
| pci_set_master(pdev); | |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); | |
| if (err) { | |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); | |
| if (err) | |
| return err; | |
| } | |
| err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); | |
| if (err) { | |
| err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); | |
| if (err) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static int num_controllers(struct pci_dev *pdev) | |
| { | |
| /* bar size alone can tell us if we are running with a dual controller | |
| * part, no need to trust revision ids that might be under broken firmware | |
| * control | |
| */ | |
| resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2); | |
| resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2); | |
| if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS && | |
| smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS) | |
| return SCI_MAX_CONTROLLERS; | |
| else | |
| return 1; | |
| } | |
| static int isci_setup_interrupts(struct pci_dev *pdev) | |
| { | |
| int err, i, num_msix; | |
| struct isci_host *ihost; | |
| struct isci_pci_info *pci_info = to_pci_info(pdev); | |
| /* | |
| * Determine the number of vectors associated with this | |
| * PCI function. | |
| */ | |
| num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT; | |
| for (i = 0; i < num_msix; i++) | |
| pci_info->msix_entries[i].entry = i; | |
| err = pci_enable_msix(pdev, pci_info->msix_entries, num_msix); | |
| if (err) | |
| goto intx; | |
| for (i = 0; i < num_msix; i++) { | |
| int id = i / SCI_NUM_MSI_X_INT; | |
| struct msix_entry *msix = &pci_info->msix_entries[i]; | |
| irq_handler_t isr; | |
| ihost = pci_info->hosts[id]; | |
| /* odd numbered vectors are error interrupts */ | |
| if (i & 1) | |
| isr = isci_error_isr; | |
| else | |
| isr = isci_msix_isr; | |
| err = devm_request_irq(&pdev->dev, msix->vector, isr, 0, | |
| DRV_NAME"-msix", ihost); | |
| if (!err) | |
| continue; | |
| dev_info(&pdev->dev, "msix setup failed falling back to intx\n"); | |
| while (i--) { | |
| id = i / SCI_NUM_MSI_X_INT; | |
| ihost = pci_info->hosts[id]; | |
| msix = &pci_info->msix_entries[i]; | |
| devm_free_irq(&pdev->dev, msix->vector, ihost); | |
| } | |
| pci_disable_msix(pdev); | |
| goto intx; | |
| } | |
| return 0; | |
| intx: | |
| for_each_isci_host(i, ihost, pdev) { | |
| err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr, | |
| IRQF_SHARED, DRV_NAME"-intx", ihost); | |
| if (err) | |
| break; | |
| } | |
| return err; | |
| } | |
| static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) | |
| { | |
| struct isci_host *isci_host; | |
| struct Scsi_Host *shost; | |
| int err; | |
| isci_host = devm_kzalloc(&pdev->dev, sizeof(*isci_host), GFP_KERNEL); | |
| if (!isci_host) | |
| return NULL; | |
| isci_host->pdev = pdev; | |
| isci_host->id = id; | |
| shost = scsi_host_alloc(&isci_sht, sizeof(void *)); | |
| if (!shost) | |
| return NULL; | |
| isci_host->shost = shost; | |
| err = isci_host_init(isci_host); | |
| if (err) | |
| goto err_shost; | |
| SHOST_TO_SAS_HA(shost) = &isci_host->sas_ha; | |
| isci_host->sas_ha.core.shost = shost; | |
| shost->transportt = isci_transport_template; | |
| shost->max_id = ~0; | |
| shost->max_lun = ~0; | |
| shost->max_cmd_len = MAX_COMMAND_SIZE; | |
| err = scsi_add_host(shost, &pdev->dev); | |
| if (err) | |
| goto err_shost; | |
| err = isci_register_sas_ha(isci_host); | |
| if (err) | |
| goto err_shost_remove; | |
| err = device_create_file(&shost->shost_dev, &dev_attr_isci_id); | |
| if (err) | |
| goto err_unregister_ha; | |
| return isci_host; | |
| err_unregister_ha: | |
| sas_unregister_ha(&(isci_host->sas_ha)); | |
| err_shost_remove: | |
| scsi_remove_host(shost); | |
| err_shost: | |
| scsi_host_put(shost); | |
| return NULL; | |
| } | |
| static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) | |
| { | |
| struct isci_pci_info *pci_info; | |
| int err, i; | |
| struct isci_host *isci_host; | |
| const struct firmware *fw = NULL; | |
| struct isci_orom *orom = NULL; | |
| char *source = "(platform)"; | |
| dev_info(&pdev->dev, "driver configured for rev: %d silicon\n", | |
| pdev->revision); | |
| pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL); | |
| if (!pci_info) | |
| return -ENOMEM; | |
| pci_set_drvdata(pdev, pci_info); | |
| if (efi_enabled) | |
| orom = isci_get_efi_var(pdev); | |
| if (!orom) | |
| orom = isci_request_oprom(pdev); | |
| for (i = 0; orom && i < num_controllers(pdev); i++) { | |
| if (sci_oem_parameters_validate(&orom->ctrl[i])) { | |
| dev_warn(&pdev->dev, | |
| "[%d]: invalid oem parameters detected, falling back to firmware\n", i); | |
| orom = NULL; | |
| break; | |
| } | |
| } | |
| if (!orom) { | |
| source = "(firmware)"; | |
| orom = isci_request_firmware(pdev, fw); | |
| if (!orom) { | |
| /* TODO convert this to WARN_TAINT_ONCE once the | |
| * orom/efi parameter support is widely available | |
| */ | |
| dev_warn(&pdev->dev, | |
| "Loading user firmware failed, using default " | |
| "values\n"); | |
| dev_warn(&pdev->dev, | |
| "Default OEM configuration being used: 4 " | |
| "narrow ports, and default SAS Addresses\n"); | |
| } | |
| } | |
| if (orom) | |
| dev_info(&pdev->dev, | |
| "OEM SAS parameters (version: %u.%u) loaded %s\n", | |
| (orom->hdr.version & 0xf0) >> 4, | |
| (orom->hdr.version & 0xf), source); | |
| pci_info->orom = orom; | |
| err = isci_pci_init(pdev); | |
| if (err) | |
| return err; | |
| for (i = 0; i < num_controllers(pdev); i++) { | |
| struct isci_host *h = isci_host_alloc(pdev, i); | |
| if (!h) { | |
| err = -ENOMEM; | |
| goto err_host_alloc; | |
| } | |
| pci_info->hosts[i] = h; | |
| } | |
| err = isci_setup_interrupts(pdev); | |
| if (err) | |
| goto err_host_alloc; | |
| for_each_isci_host(i, isci_host, pdev) | |
| scsi_scan_host(isci_host->shost); | |
| return 0; | |
| err_host_alloc: | |
| for_each_isci_host(i, isci_host, pdev) | |
| isci_unregister(isci_host); | |
| return err; | |
| } | |
| static void __devexit isci_pci_remove(struct pci_dev *pdev) | |
| { | |
| struct isci_host *ihost; | |
| int i; | |
| for_each_isci_host(i, ihost, pdev) { | |
| isci_unregister(ihost); | |
| isci_host_deinit(ihost); | |
| sci_controller_disable_interrupts(ihost); | |
| } | |
| } | |
| static struct pci_driver isci_pci_driver = { | |
| .name = DRV_NAME, | |
| .id_table = isci_id_table, | |
| .probe = isci_pci_probe, | |
| .remove = __devexit_p(isci_pci_remove), | |
| }; | |
| static __init int isci_init(void) | |
| { | |
| int err; | |
| pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME); | |
| isci_transport_template = sas_domain_attach_transport(&isci_transport_ops); | |
| if (!isci_transport_template) | |
| return -ENOMEM; | |
| err = pci_register_driver(&isci_pci_driver); | |
| if (err) | |
| sas_release_transport(isci_transport_template); | |
| return err; | |
| } | |
| static __exit void isci_exit(void) | |
| { | |
| pci_unregister_driver(&isci_pci_driver); | |
| sas_release_transport(isci_transport_template); | |
| } | |
| MODULE_LICENSE("Dual BSD/GPL"); | |
| MODULE_FIRMWARE(ISCI_FW_NAME); | |
| module_init(isci_init); | |
| module_exit(isci_exit); |