| /* | |
| * Freescale STMP378X SPI master driver | |
| * | |
| * Author: dmitry pervushin <dimka@embeddedalley.com> | |
| * | |
| * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. | |
| * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. | |
| */ | |
| /* | |
| * The code contained herein is licensed under the GNU General Public | |
| * License. You may obtain a copy of the GNU General Public License | |
| * Version 2 or later at the following locations: | |
| * | |
| * http://www.opensource.org/licenses/gpl-license.html | |
| * http://www.gnu.org/copyleft/gpl.html | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/err.h> | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/delay.h> | |
| #include <mach/platform.h> | |
| #include <mach/stmp3xxx.h> | |
| #include <mach/dma.h> | |
| #include <mach/regs-ssp.h> | |
| #include <mach/regs-apbh.h> | |
| /* 0 means DMA mode(recommended, default), !0 - PIO mode */ | |
| static int pio; | |
| static int clock; | |
| /* default timeout for busy waits is 2 seconds */ | |
| #define STMP_SPI_TIMEOUT (2 * HZ) | |
| struct stmp_spi { | |
| int id; | |
| void * __iomem regs; /* vaddr of the control registers */ | |
| int irq, err_irq; | |
| u32 dma; | |
| struct stmp3xxx_dma_descriptor d; | |
| u32 speed_khz; | |
| u32 saved_timings; | |
| u32 divider; | |
| struct clk *clk; | |
| struct device *master_dev; | |
| struct work_struct work; | |
| struct workqueue_struct *workqueue; | |
| /* lock protects queue access */ | |
| spinlock_t lock; | |
| struct list_head queue; | |
| struct completion done; | |
| }; | |
| #define busy_wait(cond) \ | |
| ({ \ | |
| unsigned long end_jiffies = jiffies + STMP_SPI_TIMEOUT; \ | |
| bool succeeded = false; \ | |
| do { \ | |
| if (cond) { \ | |
| succeeded = true; \ | |
| break; \ | |
| } \ | |
| cpu_relax(); \ | |
| } while (time_before(jiffies, end_jiffies)); \ | |
| succeeded; \ | |
| }) | |
| /** | |
| * stmp_spi_init_hw | |
| * Initialize the SSP port | |
| */ | |
| static int stmp_spi_init_hw(struct stmp_spi *ss) | |
| { | |
| int err = 0; | |
| void *pins = ss->master_dev->platform_data; | |
| err = stmp3xxx_request_pin_group(pins, dev_name(ss->master_dev)); | |
| if (err) | |
| goto out; | |
| ss->clk = clk_get(NULL, "ssp"); | |
| if (IS_ERR(ss->clk)) { | |
| err = PTR_ERR(ss->clk); | |
| goto out_free_pins; | |
| } | |
| clk_enable(ss->clk); | |
| stmp3xxx_reset_block(ss->regs, false); | |
| stmp3xxx_dma_reset_channel(ss->dma); | |
| return 0; | |
| out_free_pins: | |
| stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); | |
| out: | |
| return err; | |
| } | |
| static void stmp_spi_release_hw(struct stmp_spi *ss) | |
| { | |
| void *pins = ss->master_dev->platform_data; | |
| if (ss->clk && !IS_ERR(ss->clk)) { | |
| clk_disable(ss->clk); | |
| clk_put(ss->clk); | |
| } | |
| stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); | |
| } | |
| static int stmp_spi_setup_transfer(struct spi_device *spi, | |
| struct spi_transfer *t) | |
| { | |
| u8 bits_per_word; | |
| u32 hz; | |
| struct stmp_spi *ss = spi_master_get_devdata(spi->master); | |
| u16 rate; | |
| bits_per_word = spi->bits_per_word; | |
| if (t && t->bits_per_word) | |
| bits_per_word = t->bits_per_word; | |
| /* | |
| * Calculate speed: | |
| * - by default, use maximum speed from ssp clk | |
| * - if device overrides it, use it | |
| * - if transfer specifies other speed, use transfer's one | |
| */ | |
| hz = 1000 * ss->speed_khz / ss->divider; | |
| if (spi->max_speed_hz) | |
| hz = min(hz, spi->max_speed_hz); | |
| if (t && t->speed_hz) | |
| hz = min(hz, t->speed_hz); | |
| if (hz == 0) { | |
| dev_err(&spi->dev, "Cannot continue with zero clock\n"); | |
| return -EINVAL; | |
| } | |
| if (bits_per_word != 8) { | |
| dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", | |
| __func__, bits_per_word); | |
| return -EINVAL; | |
| } | |
| dev_dbg(&spi->dev, "Requested clk rate = %uHz, max = %uHz/%d = %uHz\n", | |
| hz, ss->speed_khz, ss->divider, | |
| ss->speed_khz * 1000 / ss->divider); | |
| if (ss->speed_khz * 1000 / ss->divider < hz) { | |
| dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n", | |
| __func__, hz); | |
| return -EINVAL; | |
| } | |
| rate = 1000 * ss->speed_khz/ss->divider/hz; | |
| writel(BF(ss->divider, SSP_TIMING_CLOCK_DIVIDE) | | |
| BF(rate - 1, SSP_TIMING_CLOCK_RATE), | |
| HW_SSP_TIMING + ss->regs); | |
| writel(BF(1 /* mode SPI */, SSP_CTRL1_SSP_MODE) | | |
| BF(4 /* 8 bits */, SSP_CTRL1_WORD_LENGTH) | | |
| ((spi->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) | | |
| ((spi->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0) | | |
| (pio ? 0 : BM_SSP_CTRL1_DMA_ENABLE), | |
| ss->regs + HW_SSP_CTRL1); | |
| return 0; | |
| } | |
| static int stmp_spi_setup(struct spi_device *spi) | |
| { | |
| /* spi_setup() does basic checks, | |
| * stmp_spi_setup_transfer() does more later | |
| */ | |
| if (spi->bits_per_word != 8) { | |
| dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", | |
| __func__, spi->bits_per_word); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static inline u32 stmp_spi_cs(unsigned cs) | |
| { | |
| return ((cs & 1) ? BM_SSP_CTRL0_WAIT_FOR_CMD : 0) | | |
| ((cs & 2) ? BM_SSP_CTRL0_WAIT_FOR_IRQ : 0); | |
| } | |
| static int stmp_spi_txrx_dma(struct stmp_spi *ss, int cs, | |
| unsigned char *buf, dma_addr_t dma_buf, int len, | |
| int first, int last, bool write) | |
| { | |
| u32 c0 = 0; | |
| dma_addr_t spi_buf_dma = dma_buf; | |
| int status = 0; | |
| enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE; | |
| c0 |= (first ? BM_SSP_CTRL0_LOCK_CS : 0); | |
| c0 |= (last ? BM_SSP_CTRL0_IGNORE_CRC : 0); | |
| c0 |= (write ? 0 : BM_SSP_CTRL0_READ); | |
| c0 |= BM_SSP_CTRL0_DATA_XFER; | |
| c0 |= stmp_spi_cs(cs); | |
| c0 |= BF(len, SSP_CTRL0_XFER_COUNT); | |
| if (!dma_buf) | |
| spi_buf_dma = dma_map_single(ss->master_dev, buf, len, dir); | |
| ss->d.command->cmd = | |
| BF(len, APBH_CHn_CMD_XFER_COUNT) | | |
| BF(1, APBH_CHn_CMD_CMDWORDS) | | |
| BM_APBH_CHn_CMD_WAIT4ENDCMD | | |
| BM_APBH_CHn_CMD_IRQONCMPLT | | |
| BF(write ? BV_APBH_CHn_CMD_COMMAND__DMA_READ : | |
| BV_APBH_CHn_CMD_COMMAND__DMA_WRITE, | |
| APBH_CHn_CMD_COMMAND); | |
| ss->d.command->pio_words[0] = c0; | |
| ss->d.command->buf_ptr = spi_buf_dma; | |
| stmp3xxx_dma_reset_channel(ss->dma); | |
| stmp3xxx_dma_clear_interrupt(ss->dma); | |
| stmp3xxx_dma_enable_interrupt(ss->dma); | |
| init_completion(&ss->done); | |
| stmp3xxx_dma_go(ss->dma, &ss->d, 1); | |
| wait_for_completion(&ss->done); | |
| if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & BM_SSP_CTRL0_RUN)) | |
| status = -ETIMEDOUT; | |
| if (!dma_buf) | |
| dma_unmap_single(ss->master_dev, spi_buf_dma, len, dir); | |
| return status; | |
| } | |
| static inline void stmp_spi_enable(struct stmp_spi *ss) | |
| { | |
| stmp3xxx_setl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); | |
| stmp3xxx_clearl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); | |
| } | |
| static inline void stmp_spi_disable(struct stmp_spi *ss) | |
| { | |
| stmp3xxx_clearl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); | |
| stmp3xxx_setl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); | |
| } | |
| static int stmp_spi_txrx_pio(struct stmp_spi *ss, int cs, | |
| unsigned char *buf, int len, | |
| bool first, bool last, bool write) | |
| { | |
| if (first) | |
| stmp_spi_enable(ss); | |
| stmp3xxx_setl(stmp_spi_cs(cs), ss->regs + HW_SSP_CTRL0); | |
| while (len--) { | |
| if (last && len <= 0) | |
| stmp_spi_disable(ss); | |
| stmp3xxx_clearl(BM_SSP_CTRL0_XFER_COUNT, | |
| ss->regs + HW_SSP_CTRL0); | |
| stmp3xxx_setl(1, ss->regs + HW_SSP_CTRL0); | |
| if (write) | |
| stmp3xxx_clearl(BM_SSP_CTRL0_READ, | |
| ss->regs + HW_SSP_CTRL0); | |
| else | |
| stmp3xxx_setl(BM_SSP_CTRL0_READ, | |
| ss->regs + HW_SSP_CTRL0); | |
| /* Run! */ | |
| stmp3xxx_setl(BM_SSP_CTRL0_RUN, ss->regs + HW_SSP_CTRL0); | |
| if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & | |
| BM_SSP_CTRL0_RUN)) | |
| break; | |
| if (write) | |
| writel(*buf, ss->regs + HW_SSP_DATA); | |
| /* Set TRANSFER */ | |
| stmp3xxx_setl(BM_SSP_CTRL0_DATA_XFER, ss->regs + HW_SSP_CTRL0); | |
| if (!write) { | |
| if (busy_wait((readl(ss->regs + HW_SSP_STATUS) & | |
| BM_SSP_STATUS_FIFO_EMPTY))) | |
| break; | |
| *buf = readl(ss->regs + HW_SSP_DATA) & 0xFF; | |
| } | |
| if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & | |
| BM_SSP_CTRL0_RUN)) | |
| break; | |
| /* advance to the next byte */ | |
| buf++; | |
| } | |
| return len < 0 ? 0 : -ETIMEDOUT; | |
| } | |
| static int stmp_spi_handle_message(struct stmp_spi *ss, struct spi_message *m) | |
| { | |
| bool first, last; | |
| struct spi_transfer *t, *tmp_t; | |
| int status = 0; | |
| int cs; | |
| cs = m->spi->chip_select; | |
| list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) { | |
| first = (&t->transfer_list == m->transfers.next); | |
| last = (&t->transfer_list == m->transfers.prev); | |
| if (first || t->speed_hz || t->bits_per_word) | |
| stmp_spi_setup_transfer(m->spi, t); | |
| /* reject "not last" transfers which request to change cs */ | |
| if (t->cs_change && !last) { | |
| dev_err(&m->spi->dev, | |
| "Message with t->cs_change has been skipped\n"); | |
| continue; | |
| } | |
| if (t->tx_buf) { | |
| status = pio ? | |
| stmp_spi_txrx_pio(ss, cs, (void *)t->tx_buf, | |
| t->len, first, last, true) : | |
| stmp_spi_txrx_dma(ss, cs, (void *)t->tx_buf, | |
| t->tx_dma, t->len, first, last, true); | |
| #ifdef DEBUG | |
| if (t->len < 0x10) | |
| print_hex_dump_bytes("Tx ", | |
| DUMP_PREFIX_OFFSET, | |
| t->tx_buf, t->len); | |
| else | |
| pr_debug("Tx: %d bytes\n", t->len); | |
| #endif | |
| } | |
| if (t->rx_buf) { | |
| status = pio ? | |
| stmp_spi_txrx_pio(ss, cs, t->rx_buf, | |
| t->len, first, last, false) : | |
| stmp_spi_txrx_dma(ss, cs, t->rx_buf, | |
| t->rx_dma, t->len, first, last, false); | |
| #ifdef DEBUG | |
| if (t->len < 0x10) | |
| print_hex_dump_bytes("Rx ", | |
| DUMP_PREFIX_OFFSET, | |
| t->rx_buf, t->len); | |
| else | |
| pr_debug("Rx: %d bytes\n", t->len); | |
| #endif | |
| } | |
| if (t->delay_usecs) | |
| udelay(t->delay_usecs); | |
| if (status) | |
| break; | |
| } | |
| return status; | |
| } | |
| /** | |
| * stmp_spi_handle - handle messages from the queue | |
| */ | |
| static void stmp_spi_handle(struct work_struct *w) | |
| { | |
| struct stmp_spi *ss = container_of(w, struct stmp_spi, work); | |
| unsigned long flags; | |
| struct spi_message *m; | |
| spin_lock_irqsave(&ss->lock, flags); | |
| while (!list_empty(&ss->queue)) { | |
| m = list_entry(ss->queue.next, struct spi_message, queue); | |
| list_del_init(&m->queue); | |
| spin_unlock_irqrestore(&ss->lock, flags); | |
| m->status = stmp_spi_handle_message(ss, m); | |
| m->complete(m->context); | |
| spin_lock_irqsave(&ss->lock, flags); | |
| } | |
| spin_unlock_irqrestore(&ss->lock, flags); | |
| return; | |
| } | |
| /** | |
| * stmp_spi_transfer - perform message transfer. | |
| * Called indirectly from spi_async, queues all the messages to | |
| * spi_handle_message. | |
| * @spi: spi device | |
| * @m: message to be queued | |
| */ | |
| static int stmp_spi_transfer(struct spi_device *spi, struct spi_message *m) | |
| { | |
| struct stmp_spi *ss = spi_master_get_devdata(spi->master); | |
| unsigned long flags; | |
| m->status = -EINPROGRESS; | |
| spin_lock_irqsave(&ss->lock, flags); | |
| list_add_tail(&m->queue, &ss->queue); | |
| queue_work(ss->workqueue, &ss->work); | |
| spin_unlock_irqrestore(&ss->lock, flags); | |
| return 0; | |
| } | |
| static irqreturn_t stmp_spi_irq(int irq, void *dev_id) | |
| { | |
| struct stmp_spi *ss = dev_id; | |
| stmp3xxx_dma_clear_interrupt(ss->dma); | |
| complete(&ss->done); | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t stmp_spi_irq_err(int irq, void *dev_id) | |
| { | |
| struct stmp_spi *ss = dev_id; | |
| u32 c1, st; | |
| c1 = readl(ss->regs + HW_SSP_CTRL1); | |
| st = readl(ss->regs + HW_SSP_STATUS); | |
| dev_err(ss->master_dev, "%s: status = 0x%08X, c1 = 0x%08X\n", | |
| __func__, st, c1); | |
| stmp3xxx_clearl(c1 & 0xCCCC0000, ss->regs + HW_SSP_CTRL1); | |
| return IRQ_HANDLED; | |
| } | |
| static int __devinit stmp_spi_probe(struct platform_device *dev) | |
| { | |
| int err = 0; | |
| struct spi_master *master; | |
| struct stmp_spi *ss; | |
| struct resource *r; | |
| master = spi_alloc_master(&dev->dev, sizeof(struct stmp_spi)); | |
| if (master == NULL) { | |
| err = -ENOMEM; | |
| goto out0; | |
| } | |
| master->flags = SPI_MASTER_HALF_DUPLEX; | |
| ss = spi_master_get_devdata(master); | |
| platform_set_drvdata(dev, master); | |
| /* Get resources(memory, IRQ) associated with the device */ | |
| r = platform_get_resource(dev, IORESOURCE_MEM, 0); | |
| if (r == NULL) { | |
| err = -ENODEV; | |
| goto out_put_master; | |
| } | |
| ss->regs = ioremap(r->start, resource_size(r)); | |
| if (!ss->regs) { | |
| err = -EINVAL; | |
| goto out_put_master; | |
| } | |
| ss->master_dev = &dev->dev; | |
| ss->id = dev->id; | |
| INIT_WORK(&ss->work, stmp_spi_handle); | |
| INIT_LIST_HEAD(&ss->queue); | |
| spin_lock_init(&ss->lock); | |
| ss->workqueue = create_singlethread_workqueue(dev_name(&dev->dev)); | |
| if (!ss->workqueue) { | |
| err = -ENXIO; | |
| goto out_put_master; | |
| } | |
| master->transfer = stmp_spi_transfer; | |
| master->setup = stmp_spi_setup; | |
| /* the spi->mode bits understood by this driver: */ | |
| master->mode_bits = SPI_CPOL | SPI_CPHA; | |
| ss->irq = platform_get_irq(dev, 0); | |
| if (ss->irq < 0) { | |
| err = ss->irq; | |
| goto out_put_master; | |
| } | |
| ss->err_irq = platform_get_irq(dev, 1); | |
| if (ss->err_irq < 0) { | |
| err = ss->err_irq; | |
| goto out_put_master; | |
| } | |
| r = platform_get_resource(dev, IORESOURCE_DMA, 0); | |
| if (r == NULL) { | |
| err = -ENODEV; | |
| goto out_put_master; | |
| } | |
| ss->dma = r->start; | |
| err = stmp3xxx_dma_request(ss->dma, &dev->dev, dev_name(&dev->dev)); | |
| if (err) | |
| goto out_put_master; | |
| err = stmp3xxx_dma_allocate_command(ss->dma, &ss->d); | |
| if (err) | |
| goto out_free_dma; | |
| master->bus_num = dev->id; | |
| master->num_chipselect = 1; | |
| /* SPI controller initializations */ | |
| err = stmp_spi_init_hw(ss); | |
| if (err) { | |
| dev_dbg(&dev->dev, "cannot initialize hardware\n"); | |
| goto out_free_dma_desc; | |
| } | |
| if (clock) { | |
| dev_info(&dev->dev, "clock rate forced to %d\n", clock); | |
| clk_set_rate(ss->clk, clock); | |
| } | |
| ss->speed_khz = clk_get_rate(ss->clk); | |
| ss->divider = 2; | |
| dev_info(&dev->dev, "max possible speed %d = %ld/%d kHz\n", | |
| ss->speed_khz, clk_get_rate(ss->clk), ss->divider); | |
| /* Register for SPI interrupt */ | |
| err = request_irq(ss->irq, stmp_spi_irq, 0, | |
| dev_name(&dev->dev), ss); | |
| if (err) { | |
| dev_dbg(&dev->dev, "request_irq failed, %d\n", err); | |
| goto out_release_hw; | |
| } | |
| /* ..and shared interrupt for all SSP controllers */ | |
| err = request_irq(ss->err_irq, stmp_spi_irq_err, IRQF_SHARED, | |
| dev_name(&dev->dev), ss); | |
| if (err) { | |
| dev_dbg(&dev->dev, "request_irq(error) failed, %d\n", err); | |
| goto out_free_irq; | |
| } | |
| err = spi_register_master(master); | |
| if (err) { | |
| dev_dbg(&dev->dev, "cannot register spi master, %d\n", err); | |
| goto out_free_irq_2; | |
| } | |
| dev_info(&dev->dev, "at (mapped) 0x%08X, irq=%d, bus %d, %s mode\n", | |
| (u32)ss->regs, ss->irq, master->bus_num, | |
| pio ? "PIO" : "DMA"); | |
| return 0; | |
| out_free_irq_2: | |
| free_irq(ss->err_irq, ss); | |
| out_free_irq: | |
| free_irq(ss->irq, ss); | |
| out_free_dma_desc: | |
| stmp3xxx_dma_free_command(ss->dma, &ss->d); | |
| out_free_dma: | |
| stmp3xxx_dma_release(ss->dma); | |
| out_release_hw: | |
| stmp_spi_release_hw(ss); | |
| out_put_master: | |
| if (ss->workqueue) | |
| destroy_workqueue(ss->workqueue); | |
| if (ss->regs) | |
| iounmap(ss->regs); | |
| platform_set_drvdata(dev, NULL); | |
| spi_master_put(master); | |
| out0: | |
| return err; | |
| } | |
| static int __devexit stmp_spi_remove(struct platform_device *dev) | |
| { | |
| struct stmp_spi *ss; | |
| struct spi_master *master; | |
| master = platform_get_drvdata(dev); | |
| if (master == NULL) | |
| goto out0; | |
| ss = spi_master_get_devdata(master); | |
| spi_unregister_master(master); | |
| free_irq(ss->err_irq, ss); | |
| free_irq(ss->irq, ss); | |
| stmp3xxx_dma_free_command(ss->dma, &ss->d); | |
| stmp3xxx_dma_release(ss->dma); | |
| stmp_spi_release_hw(ss); | |
| destroy_workqueue(ss->workqueue); | |
| iounmap(ss->regs); | |
| spi_master_put(master); | |
| platform_set_drvdata(dev, NULL); | |
| out0: | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int stmp_spi_suspend(struct platform_device *pdev, pm_message_t pmsg) | |
| { | |
| struct stmp_spi *ss; | |
| struct spi_master *master; | |
| master = platform_get_drvdata(pdev); | |
| ss = spi_master_get_devdata(master); | |
| ss->saved_timings = readl(HW_SSP_TIMING + ss->regs); | |
| clk_disable(ss->clk); | |
| return 0; | |
| } | |
| static int stmp_spi_resume(struct platform_device *pdev) | |
| { | |
| struct stmp_spi *ss; | |
| struct spi_master *master; | |
| master = platform_get_drvdata(pdev); | |
| ss = spi_master_get_devdata(master); | |
| clk_enable(ss->clk); | |
| stmp3xxx_reset_block(ss->regs, false); | |
| writel(ss->saved_timings, ss->regs + HW_SSP_TIMING); | |
| return 0; | |
| } | |
| #else | |
| #define stmp_spi_suspend NULL | |
| #define stmp_spi_resume NULL | |
| #endif | |
| static struct platform_driver stmp_spi_driver = { | |
| .probe = stmp_spi_probe, | |
| .remove = __devexit_p(stmp_spi_remove), | |
| .driver = { | |
| .name = "stmp3xxx_ssp", | |
| .owner = THIS_MODULE, | |
| }, | |
| .suspend = stmp_spi_suspend, | |
| .resume = stmp_spi_resume, | |
| }; | |
| static int __init stmp_spi_init(void) | |
| { | |
| return platform_driver_register(&stmp_spi_driver); | |
| } | |
| static void __exit stmp_spi_exit(void) | |
| { | |
| platform_driver_unregister(&stmp_spi_driver); | |
| } | |
| module_init(stmp_spi_init); | |
| module_exit(stmp_spi_exit); | |
| module_param(pio, int, S_IRUGO); | |
| module_param(clock, int, S_IRUGO); | |
| MODULE_AUTHOR("dmitry pervushin <dpervushin@embeddedalley.com>"); | |
| MODULE_DESCRIPTION("STMP3xxx SPI/SSP driver"); | |
| MODULE_LICENSE("GPL"); |