| /* | |
| * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs | |
| * | |
| * Copyright (C) 2010 Google, Inc. | |
| * Copyright (C) 2009 NVIDIA Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/platform_data/tegra_usb.h> | |
| #include <linux/irq.h> | |
| #include <linux/usb/otg.h> | |
| #include <mach/usb_phy.h> | |
| #define TEGRA_USB_DMA_ALIGN 32 | |
| struct tegra_ehci_hcd { | |
| struct ehci_hcd *ehci; | |
| struct tegra_usb_phy *phy; | |
| struct clk *clk; | |
| struct clk *emc_clk; | |
| struct otg_transceiver *transceiver; | |
| int host_resumed; | |
| int bus_suspended; | |
| int port_resuming; | |
| int power_down_on_bus_suspend; | |
| enum tegra_usb_phy_port_speed port_speed; | |
| }; | |
| static void tegra_ehci_power_up(struct usb_hcd *hcd) | |
| { | |
| struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); | |
| clk_enable(tegra->emc_clk); | |
| clk_enable(tegra->clk); | |
| tegra_usb_phy_power_on(tegra->phy); | |
| tegra->host_resumed = 1; | |
| } | |
| static void tegra_ehci_power_down(struct usb_hcd *hcd) | |
| { | |
| struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); | |
| tegra->host_resumed = 0; | |
| tegra_usb_phy_power_off(tegra->phy); | |
| clk_disable(tegra->clk); | |
| clk_disable(tegra->emc_clk); | |
| } | |
| static int tegra_ehci_internal_port_reset( | |
| struct ehci_hcd *ehci, | |
| u32 __iomem *portsc_reg | |
| ) | |
| { | |
| u32 temp; | |
| unsigned long flags; | |
| int retval = 0; | |
| int i, tries; | |
| u32 saved_usbintr; | |
| spin_lock_irqsave(&ehci->lock, flags); | |
| saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable); | |
| /* disable USB interrupt */ | |
| ehci_writel(ehci, 0, &ehci->regs->intr_enable); | |
| spin_unlock_irqrestore(&ehci->lock, flags); | |
| /* | |
| * Here we have to do Port Reset at most twice for | |
| * Port Enable bit to be set. | |
| */ | |
| for (i = 0; i < 2; i++) { | |
| temp = ehci_readl(ehci, portsc_reg); | |
| temp |= PORT_RESET; | |
| ehci_writel(ehci, temp, portsc_reg); | |
| mdelay(10); | |
| temp &= ~PORT_RESET; | |
| ehci_writel(ehci, temp, portsc_reg); | |
| mdelay(1); | |
| tries = 100; | |
| do { | |
| mdelay(1); | |
| /* | |
| * Up to this point, Port Enable bit is | |
| * expected to be set after 2 ms waiting. | |
| * USB1 usually takes extra 45 ms, for safety, | |
| * we take 100 ms as timeout. | |
| */ | |
| temp = ehci_readl(ehci, portsc_reg); | |
| } while (!(temp & PORT_PE) && tries--); | |
| if (temp & PORT_PE) | |
| break; | |
| } | |
| if (i == 2) | |
| retval = -ETIMEDOUT; | |
| /* | |
| * Clear Connect Status Change bit if it's set. | |
| * We can't clear PORT_PEC. It will also cause PORT_PE to be cleared. | |
| */ | |
| if (temp & PORT_CSC) | |
| ehci_writel(ehci, PORT_CSC, portsc_reg); | |
| /* | |
| * Write to clear any interrupt status bits that might be set | |
| * during port reset. | |
| */ | |
| temp = ehci_readl(ehci, &ehci->regs->status); | |
| ehci_writel(ehci, temp, &ehci->regs->status); | |
| /* restore original interrupt enable bits */ | |
| ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable); | |
| return retval; | |
| } | |
| static int tegra_ehci_hub_control( | |
| struct usb_hcd *hcd, | |
| u16 typeReq, | |
| u16 wValue, | |
| u16 wIndex, | |
| char *buf, | |
| u16 wLength | |
| ) | |
| { | |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
| struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); | |
| u32 __iomem *status_reg; | |
| u32 temp; | |
| unsigned long flags; | |
| int retval = 0; | |
| status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; | |
| spin_lock_irqsave(&ehci->lock, flags); | |
| /* | |
| * In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits | |
| * that are write on clear, by writing back the register read value, so | |
| * USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits | |
| */ | |
| if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) { | |
| temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS; | |
| ehci_writel(ehci, temp & ~PORT_PE, status_reg); | |
| goto done; | |
| } | |
| else if (typeReq == GetPortStatus) { | |
| temp = ehci_readl(ehci, status_reg); | |
| if (tegra->port_resuming && !(temp & PORT_SUSPEND)) { | |
| /* Resume completed, re-enable disconnect detection */ | |
| tegra->port_resuming = 0; | |
| tegra_usb_phy_postresume(tegra->phy); | |
| } | |
| } | |
| else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { | |
| temp = ehci_readl(ehci, status_reg); | |
| if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { | |
| retval = -EPIPE; | |
| goto done; | |
| } | |
| temp &= ~PORT_WKCONN_E; | |
| temp |= PORT_WKDISC_E | PORT_WKOC_E; | |
| ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); | |
| /* | |
| * If a transaction is in progress, there may be a delay in | |
| * suspending the port. Poll until the port is suspended. | |
| */ | |
| if (handshake(ehci, status_reg, PORT_SUSPEND, | |
| PORT_SUSPEND, 5000)) | |
| pr_err("%s: timeout waiting for SUSPEND\n", __func__); | |
| set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); | |
| goto done; | |
| } | |
| /* For USB1 port we need to issue Port Reset twice internally */ | |
| if (tegra->phy->instance == 0 && | |
| (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_RESET)) { | |
| spin_unlock_irqrestore(&ehci->lock, flags); | |
| return tegra_ehci_internal_port_reset(ehci, status_reg); | |
| } | |
| /* | |
| * Tegra host controller will time the resume operation to clear the bit | |
| * when the port control state switches to HS or FS Idle. This behavior | |
| * is different from EHCI where the host controller driver is required | |
| * to set this bit to a zero after the resume duration is timed in the | |
| * driver. | |
| */ | |
| else if (typeReq == ClearPortFeature && | |
| wValue == USB_PORT_FEAT_SUSPEND) { | |
| temp = ehci_readl(ehci, status_reg); | |
| if ((temp & PORT_RESET) || !(temp & PORT_PE)) { | |
| retval = -EPIPE; | |
| goto done; | |
| } | |
| if (!(temp & PORT_SUSPEND)) | |
| goto done; | |
| /* Disable disconnect detection during port resume */ | |
| tegra_usb_phy_preresume(tegra->phy); | |
| ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25); | |
| temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); | |
| /* start resume signalling */ | |
| ehci_writel(ehci, temp | PORT_RESUME, status_reg); | |
| spin_unlock_irqrestore(&ehci->lock, flags); | |
| msleep(20); | |
| spin_lock_irqsave(&ehci->lock, flags); | |
| /* Poll until the controller clears RESUME and SUSPEND */ | |
| if (handshake(ehci, status_reg, PORT_RESUME, 0, 2000)) | |
| pr_err("%s: timeout waiting for RESUME\n", __func__); | |
| if (handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000)) | |
| pr_err("%s: timeout waiting for SUSPEND\n", __func__); | |
| ehci->reset_done[wIndex-1] = 0; | |
| tegra->port_resuming = 1; | |
| goto done; | |
| } | |
| spin_unlock_irqrestore(&ehci->lock, flags); | |
| /* Handle the hub control events here */ | |
| return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); | |
| done: | |
| spin_unlock_irqrestore(&ehci->lock, flags); | |
| return retval; | |
| } | |
| static void tegra_ehci_restart(struct usb_hcd *hcd) | |
| { | |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
| ehci_reset(ehci); | |
| /* setup the frame list and Async q heads */ | |
| ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list); | |
| ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next); | |
| /* setup the command register and set the controller in RUN mode */ | |
| ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); | |
| ehci->command |= CMD_RUN; | |
| ehci_writel(ehci, ehci->command, &ehci->regs->command); | |
| down_write(&ehci_cf_port_reset_rwsem); | |
| ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); | |
| /* flush posted writes */ | |
| ehci_readl(ehci, &ehci->regs->command); | |
| up_write(&ehci_cf_port_reset_rwsem); | |
| } | |
| static int tegra_usb_suspend(struct usb_hcd *hcd) | |
| { | |
| struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); | |
| struct ehci_regs __iomem *hw = tegra->ehci->regs; | |
| unsigned long flags; | |
| spin_lock_irqsave(&tegra->ehci->lock, flags); | |
| tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; | |
| ehci_halt(tegra->ehci); | |
| clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); | |
| spin_unlock_irqrestore(&tegra->ehci->lock, flags); | |
| tegra_ehci_power_down(hcd); | |
| return 0; | |
| } | |
| static int tegra_usb_resume(struct usb_hcd *hcd) | |
| { | |
| struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); | |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
| struct ehci_regs __iomem *hw = ehci->regs; | |
| unsigned long val; | |
| set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); | |
| tegra_ehci_power_up(hcd); | |
| if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { | |
| /* Wait for the phy to detect new devices | |
| * before we restart the controller */ | |
| msleep(10); | |
| goto restart; | |
| } | |
| /* Force the phy to keep data lines in suspend state */ | |
| tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); | |
| /* Enable host mode */ | |
| tdi_reset(ehci); | |
| /* Enable Port Power */ | |
| val = readl(&hw->port_status[0]); | |
| val |= PORT_POWER; | |
| writel(val, &hw->port_status[0]); | |
| udelay(10); | |
| /* Check if the phy resume from LP0. When the phy resume from LP0 | |
| * USB register will be reset. */ | |
| if (!readl(&hw->async_next)) { | |
| /* Program the field PTC based on the saved speed mode */ | |
| val = readl(&hw->port_status[0]); | |
| val &= ~PORT_TEST(~0); | |
| if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) | |
| val |= PORT_TEST_FORCE; | |
| else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) | |
| val |= PORT_TEST(6); | |
| else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) | |
| val |= PORT_TEST(7); | |
| writel(val, &hw->port_status[0]); | |
| udelay(10); | |
| /* Disable test mode by setting PTC field to NORMAL_OP */ | |
| val = readl(&hw->port_status[0]); | |
| val &= ~PORT_TEST(~0); | |
| writel(val, &hw->port_status[0]); | |
| udelay(10); | |
| } | |
| /* Poll until CCS is enabled */ | |
| if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, | |
| PORT_CONNECT, 2000)) { | |
| pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); | |
| goto restart; | |
| } | |
| /* Poll until PE is enabled */ | |
| if (handshake(ehci, &hw->port_status[0], PORT_PE, | |
| PORT_PE, 2000)) { | |
| pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); | |
| goto restart; | |
| } | |
| /* Clear the PCI status, to avoid an interrupt taken upon resume */ | |
| val = readl(&hw->status); | |
| val |= STS_PCD; | |
| writel(val, &hw->status); | |
| /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ | |
| val = readl(&hw->port_status[0]); | |
| if ((val & PORT_POWER) && (val & PORT_PE)) { | |
| val |= PORT_SUSPEND; | |
| writel(val, &hw->port_status[0]); | |
| /* Wait until port suspend completes */ | |
| if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, | |
| PORT_SUSPEND, 1000)) { | |
| pr_err("%s: timeout waiting for PORT_SUSPEND\n", | |
| __func__); | |
| goto restart; | |
| } | |
| } | |
| tegra_ehci_phy_restore_end(tegra->phy); | |
| return 0; | |
| restart: | |
| if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) | |
| tegra_ehci_phy_restore_end(tegra->phy); | |
| tegra_ehci_restart(hcd); | |
| return 0; | |
| } | |
| static void tegra_ehci_shutdown(struct usb_hcd *hcd) | |
| { | |
| struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); | |
| /* ehci_shutdown touches the USB controller registers, make sure | |
| * controller has clocks to it */ | |
| if (!tegra->host_resumed) | |
| tegra_ehci_power_up(hcd); | |
| ehci_shutdown(hcd); | |
| } | |
| static int tegra_ehci_setup(struct usb_hcd *hcd) | |
| { | |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
| int retval; | |
| /* EHCI registers start at offset 0x100 */ | |
| ehci->caps = hcd->regs + 0x100; | |
| ehci->regs = hcd->regs + 0x100 + | |
| HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase)); | |
| dbg_hcs_params(ehci, "reset"); | |
| dbg_hcc_params(ehci, "reset"); | |
| /* cache this readonly data; minimize chip reads */ | |
| ehci->hcs_params = readl(&ehci->caps->hcs_params); | |
| /* switch to host mode */ | |
| hcd->has_tt = 1; | |
| ehci_reset(ehci); | |
| retval = ehci_halt(ehci); | |
| if (retval) | |
| return retval; | |
| /* data structure init */ | |
| retval = ehci_init(hcd); | |
| if (retval) | |
| return retval; | |
| ehci->sbrn = 0x20; | |
| ehci_port_power(ehci, 1); | |
| return retval; | |
| } | |
| #ifdef CONFIG_PM | |
| static int tegra_ehci_bus_suspend(struct usb_hcd *hcd) | |
| { | |
| struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); | |
| int error_status = 0; | |
| error_status = ehci_bus_suspend(hcd); | |
| if (!error_status && tegra->power_down_on_bus_suspend) { | |
| tegra_usb_suspend(hcd); | |
| tegra->bus_suspended = 1; | |
| } | |
| return error_status; | |
| } | |
| static int tegra_ehci_bus_resume(struct usb_hcd *hcd) | |
| { | |
| struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); | |
| if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) { | |
| tegra_usb_resume(hcd); | |
| tegra->bus_suspended = 0; | |
| } | |
| tegra_usb_phy_preresume(tegra->phy); | |
| tegra->port_resuming = 1; | |
| return ehci_bus_resume(hcd); | |
| } | |
| #endif | |
| struct temp_buffer { | |
| void *kmalloc_ptr; | |
| void *old_xfer_buffer; | |
| u8 data[0]; | |
| }; | |
| static void free_temp_buffer(struct urb *urb) | |
| { | |
| enum dma_data_direction dir; | |
| struct temp_buffer *temp; | |
| if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) | |
| return; | |
| dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; | |
| temp = container_of(urb->transfer_buffer, struct temp_buffer, | |
| data); | |
| if (dir == DMA_FROM_DEVICE) | |
| memcpy(temp->old_xfer_buffer, temp->data, | |
| urb->transfer_buffer_length); | |
| urb->transfer_buffer = temp->old_xfer_buffer; | |
| kfree(temp->kmalloc_ptr); | |
| urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; | |
| } | |
| static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags) | |
| { | |
| enum dma_data_direction dir; | |
| struct temp_buffer *temp, *kmalloc_ptr; | |
| size_t kmalloc_size; | |
| if (urb->num_sgs || urb->sg || | |
| urb->transfer_buffer_length == 0 || | |
| !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1))) | |
| return 0; | |
| dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; | |
| /* Allocate a buffer with enough padding for alignment */ | |
| kmalloc_size = urb->transfer_buffer_length + | |
| sizeof(struct temp_buffer) + TEGRA_USB_DMA_ALIGN - 1; | |
| kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); | |
| if (!kmalloc_ptr) | |
| return -ENOMEM; | |
| /* Position our struct temp_buffer such that data is aligned */ | |
| temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1; | |
| temp->kmalloc_ptr = kmalloc_ptr; | |
| temp->old_xfer_buffer = urb->transfer_buffer; | |
| if (dir == DMA_TO_DEVICE) | |
| memcpy(temp->data, urb->transfer_buffer, | |
| urb->transfer_buffer_length); | |
| urb->transfer_buffer = temp->data; | |
| urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; | |
| return 0; | |
| } | |
| static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, | |
| gfp_t mem_flags) | |
| { | |
| int ret; | |
| ret = alloc_temp_buffer(urb, mem_flags); | |
| if (ret) | |
| return ret; | |
| ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); | |
| if (ret) | |
| free_temp_buffer(urb); | |
| return ret; | |
| } | |
| static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) | |
| { | |
| usb_hcd_unmap_urb_for_dma(hcd, urb); | |
| free_temp_buffer(urb); | |
| } | |
| static const struct hc_driver tegra_ehci_hc_driver = { | |
| .description = hcd_name, | |
| .product_desc = "Tegra EHCI Host Controller", | |
| .hcd_priv_size = sizeof(struct ehci_hcd), | |
| .flags = HCD_USB2 | HCD_MEMORY, | |
| .reset = tegra_ehci_setup, | |
| .irq = ehci_irq, | |
| .start = ehci_run, | |
| .stop = ehci_stop, | |
| .shutdown = tegra_ehci_shutdown, | |
| .urb_enqueue = ehci_urb_enqueue, | |
| .urb_dequeue = ehci_urb_dequeue, | |
| .map_urb_for_dma = tegra_ehci_map_urb_for_dma, | |
| .unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma, | |
| .endpoint_disable = ehci_endpoint_disable, | |
| .endpoint_reset = ehci_endpoint_reset, | |
| .get_frame_number = ehci_get_frame, | |
| .hub_status_data = ehci_hub_status_data, | |
| .hub_control = tegra_ehci_hub_control, | |
| .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, | |
| #ifdef CONFIG_PM | |
| .bus_suspend = tegra_ehci_bus_suspend, | |
| .bus_resume = tegra_ehci_bus_resume, | |
| #endif | |
| .relinquish_port = ehci_relinquish_port, | |
| .port_handed_over = ehci_port_handed_over, | |
| }; | |
| static int tegra_ehci_probe(struct platform_device *pdev) | |
| { | |
| struct resource *res; | |
| struct usb_hcd *hcd; | |
| struct tegra_ehci_hcd *tegra; | |
| struct tegra_ehci_platform_data *pdata; | |
| int err = 0; | |
| int irq; | |
| int instance = pdev->id; | |
| pdata = pdev->dev.platform_data; | |
| if (!pdata) { | |
| dev_err(&pdev->dev, "Platform data missing\n"); | |
| return -EINVAL; | |
| } | |
| tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL); | |
| if (!tegra) | |
| return -ENOMEM; | |
| hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev, | |
| dev_name(&pdev->dev)); | |
| if (!hcd) { | |
| dev_err(&pdev->dev, "Unable to create HCD\n"); | |
| err = -ENOMEM; | |
| goto fail_hcd; | |
| } | |
| platform_set_drvdata(pdev, tegra); | |
| tegra->clk = clk_get(&pdev->dev, NULL); | |
| if (IS_ERR(tegra->clk)) { | |
| dev_err(&pdev->dev, "Can't get ehci clock\n"); | |
| err = PTR_ERR(tegra->clk); | |
| goto fail_clk; | |
| } | |
| err = clk_enable(tegra->clk); | |
| if (err) | |
| goto fail_clken; | |
| tegra->emc_clk = clk_get(&pdev->dev, "emc"); | |
| if (IS_ERR(tegra->emc_clk)) { | |
| dev_err(&pdev->dev, "Can't get emc clock\n"); | |
| err = PTR_ERR(tegra->emc_clk); | |
| goto fail_emc_clk; | |
| } | |
| clk_enable(tegra->emc_clk); | |
| clk_set_rate(tegra->emc_clk, 400000000); | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) { | |
| dev_err(&pdev->dev, "Failed to get I/O memory\n"); | |
| err = -ENXIO; | |
| goto fail_io; | |
| } | |
| hcd->rsrc_start = res->start; | |
| hcd->rsrc_len = resource_size(res); | |
| hcd->regs = ioremap(res->start, resource_size(res)); | |
| if (!hcd->regs) { | |
| dev_err(&pdev->dev, "Failed to remap I/O memory\n"); | |
| err = -ENOMEM; | |
| goto fail_io; | |
| } | |
| tegra->phy = tegra_usb_phy_open(instance, hcd->regs, pdata->phy_config, | |
| TEGRA_USB_PHY_MODE_HOST); | |
| if (IS_ERR(tegra->phy)) { | |
| dev_err(&pdev->dev, "Failed to open USB phy\n"); | |
| err = -ENXIO; | |
| goto fail_phy; | |
| } | |
| err = tegra_usb_phy_power_on(tegra->phy); | |
| if (err) { | |
| dev_err(&pdev->dev, "Failed to power on the phy\n"); | |
| goto fail; | |
| } | |
| tegra->host_resumed = 1; | |
| tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend; | |
| tegra->ehci = hcd_to_ehci(hcd); | |
| irq = platform_get_irq(pdev, 0); | |
| if (!irq) { | |
| dev_err(&pdev->dev, "Failed to get IRQ\n"); | |
| err = -ENODEV; | |
| goto fail; | |
| } | |
| set_irq_flags(irq, IRQF_VALID); | |
| #ifdef CONFIG_USB_OTG_UTILS | |
| if (pdata->operating_mode == TEGRA_USB_OTG) { | |
| tegra->transceiver = otg_get_transceiver(); | |
| if (tegra->transceiver) | |
| otg_set_host(tegra->transceiver, &hcd->self); | |
| } | |
| #endif | |
| err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); | |
| if (err) { | |
| dev_err(&pdev->dev, "Failed to add USB HCD\n"); | |
| goto fail; | |
| } | |
| return err; | |
| fail: | |
| #ifdef CONFIG_USB_OTG_UTILS | |
| if (tegra->transceiver) { | |
| otg_set_host(tegra->transceiver, NULL); | |
| otg_put_transceiver(tegra->transceiver); | |
| } | |
| #endif | |
| tegra_usb_phy_close(tegra->phy); | |
| fail_phy: | |
| iounmap(hcd->regs); | |
| fail_io: | |
| clk_disable(tegra->emc_clk); | |
| clk_put(tegra->emc_clk); | |
| fail_emc_clk: | |
| clk_disable(tegra->clk); | |
| fail_clken: | |
| clk_put(tegra->clk); | |
| fail_clk: | |
| usb_put_hcd(hcd); | |
| fail_hcd: | |
| kfree(tegra); | |
| return err; | |
| } | |
| #ifdef CONFIG_PM | |
| static int tegra_ehci_resume(struct platform_device *pdev) | |
| { | |
| struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); | |
| struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); | |
| if (tegra->bus_suspended) | |
| return 0; | |
| return tegra_usb_resume(hcd); | |
| } | |
| static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state) | |
| { | |
| struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); | |
| struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); | |
| if (tegra->bus_suspended) | |
| return 0; | |
| if (time_before(jiffies, tegra->ehci->next_statechange)) | |
| msleep(10); | |
| return tegra_usb_suspend(hcd); | |
| } | |
| #endif | |
| static int tegra_ehci_remove(struct platform_device *pdev) | |
| { | |
| struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); | |
| struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); | |
| if (tegra == NULL || hcd == NULL) | |
| return -EINVAL; | |
| #ifdef CONFIG_USB_OTG_UTILS | |
| if (tegra->transceiver) { | |
| otg_set_host(tegra->transceiver, NULL); | |
| otg_put_transceiver(tegra->transceiver); | |
| } | |
| #endif | |
| usb_remove_hcd(hcd); | |
| usb_put_hcd(hcd); | |
| tegra_usb_phy_close(tegra->phy); | |
| iounmap(hcd->regs); | |
| clk_disable(tegra->clk); | |
| clk_put(tegra->clk); | |
| clk_disable(tegra->emc_clk); | |
| clk_put(tegra->emc_clk); | |
| kfree(tegra); | |
| return 0; | |
| } | |
| static void tegra_ehci_hcd_shutdown(struct platform_device *pdev) | |
| { | |
| struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); | |
| struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); | |
| if (hcd->driver->shutdown) | |
| hcd->driver->shutdown(hcd); | |
| } | |
| static struct platform_driver tegra_ehci_driver = { | |
| .probe = tegra_ehci_probe, | |
| .remove = tegra_ehci_remove, | |
| #ifdef CONFIG_PM | |
| .suspend = tegra_ehci_suspend, | |
| .resume = tegra_ehci_resume, | |
| #endif | |
| .shutdown = tegra_ehci_hcd_shutdown, | |
| .driver = { | |
| .name = "tegra-ehci", | |
| } | |
| }; |