| /* | |
| Keyspan USB to Serial Converter driver | |
| (C) Copyright (C) 2000-2001 | |
| Hugh Blemings <hugh@blemings.org> | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2 of the License, or | |
| (at your option) any later version. | |
| See http://blemings.org/hugh/keyspan.html for more information. | |
| Code in this driver inspired by and in a number of places taken | |
| from Brian Warner's original Keyspan-PDA driver. | |
| This driver has been put together with the support of Innosys, Inc. | |
| and Keyspan, Inc the manufacturers of the Keyspan USB-serial products. | |
| Thanks Guys :) | |
| Thanks to Paulus for miscellaneous tidy ups, some largish chunks | |
| of much nicer and/or completely new code and (perhaps most uniquely) | |
| having the patience to sit down and explain why and where he'd changed | |
| stuff. | |
| Tip 'o the hat to IBM (and previously Linuxcare :) for supporting | |
| staff in their work on open source projects. | |
| See keyspan.c for update history. | |
| */ | |
| #ifndef __LINUX_USB_SERIAL_KEYSPAN_H | |
| #define __LINUX_USB_SERIAL_KEYSPAN_H | |
| /* Function prototypes for Keyspan serial converter */ | |
| static int keyspan_open (struct tty_struct *tty, | |
| struct usb_serial_port *port); | |
| static void keyspan_close (struct usb_serial_port *port); | |
| static void keyspan_dtr_rts (struct usb_serial_port *port, int on); | |
| static int keyspan_startup (struct usb_serial *serial); | |
| static void keyspan_disconnect (struct usb_serial *serial); | |
| static void keyspan_release (struct usb_serial *serial); | |
| static int keyspan_write_room (struct tty_struct *tty); | |
| static int keyspan_write (struct tty_struct *tty, | |
| struct usb_serial_port *port, | |
| const unsigned char *buf, | |
| int count); | |
| static void keyspan_send_setup (struct usb_serial_port *port, | |
| int reset_port); | |
| static void keyspan_set_termios (struct tty_struct *tty, | |
| struct usb_serial_port *port, | |
| struct ktermios *old); | |
| static void keyspan_break_ctl (struct tty_struct *tty, | |
| int break_state); | |
| static int keyspan_tiocmget (struct tty_struct *tty); | |
| static int keyspan_tiocmset (struct tty_struct *tty, | |
| unsigned int set, | |
| unsigned int clear); | |
| static int keyspan_fake_startup (struct usb_serial *serial); | |
| static int keyspan_usa19_calc_baud (u32 baud_rate, u32 baudclk, | |
| u8 *rate_hi, u8 *rate_low, | |
| u8 *prescaler, int portnum); | |
| static int keyspan_usa19w_calc_baud (u32 baud_rate, u32 baudclk, | |
| u8 *rate_hi, u8 *rate_low, | |
| u8 *prescaler, int portnum); | |
| static int keyspan_usa28_calc_baud (u32 baud_rate, u32 baudclk, | |
| u8 *rate_hi, u8 *rate_low, | |
| u8 *prescaler, int portnum); | |
| static int keyspan_usa19hs_calc_baud (u32 baud_rate, u32 baudclk, | |
| u8 *rate_hi, u8 *rate_low, | |
| u8 *prescaler, int portnum); | |
| static int keyspan_usa28_send_setup (struct usb_serial *serial, | |
| struct usb_serial_port *port, | |
| int reset_port); | |
| static int keyspan_usa26_send_setup (struct usb_serial *serial, | |
| struct usb_serial_port *port, | |
| int reset_port); | |
| static int keyspan_usa49_send_setup (struct usb_serial *serial, | |
| struct usb_serial_port *port, | |
| int reset_port); | |
| static int keyspan_usa90_send_setup (struct usb_serial *serial, | |
| struct usb_serial_port *port, | |
| int reset_port); | |
| static int keyspan_usa67_send_setup (struct usb_serial *serial, | |
| struct usb_serial_port *port, | |
| int reset_port); | |
| /* Values used for baud rate calculation - device specific */ | |
| #define KEYSPAN_INVALID_BAUD_RATE (-1) | |
| #define KEYSPAN_BAUD_RATE_OK (0) | |
| #define KEYSPAN_USA18X_BAUDCLK (12000000L) /* a guess */ | |
| #define KEYSPAN_USA19_BAUDCLK (12000000L) | |
| #define KEYSPAN_USA19W_BAUDCLK (24000000L) | |
| #define KEYSPAN_USA19HS_BAUDCLK (14769231L) | |
| #define KEYSPAN_USA28_BAUDCLK (1843200L) | |
| #define KEYSPAN_USA28X_BAUDCLK (12000000L) | |
| #define KEYSPAN_USA49W_BAUDCLK (48000000L) | |
| /* Some constants used to characterise each device. */ | |
| #define KEYSPAN_MAX_NUM_PORTS (4) | |
| #define KEYSPAN_MAX_FLIPS (2) | |
| /* Device info for the Keyspan serial converter, used | |
| by the overall usb-serial probe function */ | |
| #define KEYSPAN_VENDOR_ID (0x06cd) | |
| /* Product IDs for the products supported, pre-renumeration */ | |
| #define keyspan_usa18x_pre_product_id 0x0105 | |
| #define keyspan_usa19_pre_product_id 0x0103 | |
| #define keyspan_usa19qi_pre_product_id 0x010b | |
| #define keyspan_mpr_pre_product_id 0x011b | |
| #define keyspan_usa19qw_pre_product_id 0x0118 | |
| #define keyspan_usa19w_pre_product_id 0x0106 | |
| #define keyspan_usa28_pre_product_id 0x0101 | |
| #define keyspan_usa28x_pre_product_id 0x0102 | |
| #define keyspan_usa28xa_pre_product_id 0x0114 | |
| #define keyspan_usa28xb_pre_product_id 0x0113 | |
| #define keyspan_usa49w_pre_product_id 0x0109 | |
| #define keyspan_usa49wlc_pre_product_id 0x011a | |
| /* Product IDs post-renumeration. Note that the 28x and 28xb | |
| have the same id's post-renumeration but behave identically | |
| so it's not an issue. As such, the 28xb is not listed in any | |
| of the device tables. */ | |
| #define keyspan_usa18x_product_id 0x0112 | |
| #define keyspan_usa19_product_id 0x0107 | |
| #define keyspan_usa19qi_product_id 0x010c | |
| #define keyspan_usa19hs_product_id 0x0121 | |
| #define keyspan_mpr_product_id 0x011c | |
| #define keyspan_usa19qw_product_id 0x0119 | |
| #define keyspan_usa19w_product_id 0x0108 | |
| #define keyspan_usa28_product_id 0x010f | |
| #define keyspan_usa28x_product_id 0x0110 | |
| #define keyspan_usa28xa_product_id 0x0115 | |
| #define keyspan_usa28xb_product_id 0x0110 | |
| #define keyspan_usa28xg_product_id 0x0135 | |
| #define keyspan_usa49w_product_id 0x010a | |
| #define keyspan_usa49wlc_product_id 0x012a | |
| #define keyspan_usa49wg_product_id 0x0131 | |
| struct keyspan_device_details { | |
| /* product ID value */ | |
| int product_id; | |
| enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format; | |
| /* Number of physical ports */ | |
| int num_ports; | |
| /* 1 if endpoint flipping used on input, 0 if not */ | |
| int indat_endp_flip; | |
| /* 1 if endpoint flipping used on output, 0 if not */ | |
| int outdat_endp_flip; | |
| /* Table mapping input data endpoint IDs to physical | |
| port number and flip if used */ | |
| int indat_endpoints[KEYSPAN_MAX_NUM_PORTS]; | |
| /* Same for output endpoints */ | |
| int outdat_endpoints[KEYSPAN_MAX_NUM_PORTS]; | |
| /* Input acknowledge endpoints */ | |
| int inack_endpoints[KEYSPAN_MAX_NUM_PORTS]; | |
| /* Output control endpoints */ | |
| int outcont_endpoints[KEYSPAN_MAX_NUM_PORTS]; | |
| /* Endpoint used for input status */ | |
| int instat_endpoint; | |
| /* Endpoint used for input data 49WG only */ | |
| int indat_endpoint; | |
| /* Endpoint used for global control functions */ | |
| int glocont_endpoint; | |
| int (*calculate_baud_rate) (u32 baud_rate, u32 baudclk, | |
| u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); | |
| u32 baudclk; | |
| }; | |
| /* Now for each device type we setup the device detail | |
| structure with the appropriate information (provided | |
| in Keyspan's documentation) */ | |
| static const struct keyspan_device_details usa18x_device_details = { | |
| .product_id = keyspan_usa18x_product_id, | |
| .msg_format = msg_usa26, | |
| .num_ports = 1, | |
| .indat_endp_flip = 0, | |
| .outdat_endp_flip = 1, | |
| .indat_endpoints = {0x81}, | |
| .outdat_endpoints = {0x01}, | |
| .inack_endpoints = {0x85}, | |
| .outcont_endpoints = {0x05}, | |
| .instat_endpoint = 0x87, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = 0x07, | |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, | |
| .baudclk = KEYSPAN_USA18X_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details usa19_device_details = { | |
| .product_id = keyspan_usa19_product_id, | |
| .msg_format = msg_usa28, | |
| .num_ports = 1, | |
| .indat_endp_flip = 1, | |
| .outdat_endp_flip = 1, | |
| .indat_endpoints = {0x81}, | |
| .outdat_endpoints = {0x01}, | |
| .inack_endpoints = {0x83}, | |
| .outcont_endpoints = {0x03}, | |
| .instat_endpoint = 0x84, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = -1, | |
| .calculate_baud_rate = keyspan_usa19_calc_baud, | |
| .baudclk = KEYSPAN_USA19_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details usa19qi_device_details = { | |
| .product_id = keyspan_usa19qi_product_id, | |
| .msg_format = msg_usa28, | |
| .num_ports = 1, | |
| .indat_endp_flip = 1, | |
| .outdat_endp_flip = 1, | |
| .indat_endpoints = {0x81}, | |
| .outdat_endpoints = {0x01}, | |
| .inack_endpoints = {0x83}, | |
| .outcont_endpoints = {0x03}, | |
| .instat_endpoint = 0x84, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = -1, | |
| .calculate_baud_rate = keyspan_usa28_calc_baud, | |
| .baudclk = KEYSPAN_USA19_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details mpr_device_details = { | |
| .product_id = keyspan_mpr_product_id, | |
| .msg_format = msg_usa28, | |
| .num_ports = 1, | |
| .indat_endp_flip = 1, | |
| .outdat_endp_flip = 1, | |
| .indat_endpoints = {0x81}, | |
| .outdat_endpoints = {0x01}, | |
| .inack_endpoints = {0x83}, | |
| .outcont_endpoints = {0x03}, | |
| .instat_endpoint = 0x84, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = -1, | |
| .calculate_baud_rate = keyspan_usa28_calc_baud, | |
| .baudclk = KEYSPAN_USA19_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details usa19qw_device_details = { | |
| .product_id = keyspan_usa19qw_product_id, | |
| .msg_format = msg_usa26, | |
| .num_ports = 1, | |
| .indat_endp_flip = 0, | |
| .outdat_endp_flip = 1, | |
| .indat_endpoints = {0x81}, | |
| .outdat_endpoints = {0x01}, | |
| .inack_endpoints = {0x85}, | |
| .outcont_endpoints = {0x05}, | |
| .instat_endpoint = 0x87, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = 0x07, | |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, | |
| .baudclk = KEYSPAN_USA19W_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details usa19w_device_details = { | |
| .product_id = keyspan_usa19w_product_id, | |
| .msg_format = msg_usa26, | |
| .num_ports = 1, | |
| .indat_endp_flip = 0, | |
| .outdat_endp_flip = 1, | |
| .indat_endpoints = {0x81}, | |
| .outdat_endpoints = {0x01}, | |
| .inack_endpoints = {0x85}, | |
| .outcont_endpoints = {0x05}, | |
| .instat_endpoint = 0x87, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = 0x07, | |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, | |
| .baudclk = KEYSPAN_USA19W_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details usa19hs_device_details = { | |
| .product_id = keyspan_usa19hs_product_id, | |
| .msg_format = msg_usa90, | |
| .num_ports = 1, | |
| .indat_endp_flip = 0, | |
| .outdat_endp_flip = 0, | |
| .indat_endpoints = {0x81}, | |
| .outdat_endpoints = {0x01}, | |
| .inack_endpoints = {-1}, | |
| .outcont_endpoints = {0x02}, | |
| .instat_endpoint = 0x82, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = -1, | |
| .calculate_baud_rate = keyspan_usa19hs_calc_baud, | |
| .baudclk = KEYSPAN_USA19HS_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details usa28_device_details = { | |
| .product_id = keyspan_usa28_product_id, | |
| .msg_format = msg_usa28, | |
| .num_ports = 2, | |
| .indat_endp_flip = 1, | |
| .outdat_endp_flip = 1, | |
| .indat_endpoints = {0x81, 0x83}, | |
| .outdat_endpoints = {0x01, 0x03}, | |
| .inack_endpoints = {0x85, 0x86}, | |
| .outcont_endpoints = {0x05, 0x06}, | |
| .instat_endpoint = 0x87, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = 0x07, | |
| .calculate_baud_rate = keyspan_usa28_calc_baud, | |
| .baudclk = KEYSPAN_USA28_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details usa28x_device_details = { | |
| .product_id = keyspan_usa28x_product_id, | |
| .msg_format = msg_usa26, | |
| .num_ports = 2, | |
| .indat_endp_flip = 0, | |
| .outdat_endp_flip = 1, | |
| .indat_endpoints = {0x81, 0x83}, | |
| .outdat_endpoints = {0x01, 0x03}, | |
| .inack_endpoints = {0x85, 0x86}, | |
| .outcont_endpoints = {0x05, 0x06}, | |
| .instat_endpoint = 0x87, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = 0x07, | |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, | |
| .baudclk = KEYSPAN_USA28X_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details usa28xa_device_details = { | |
| .product_id = keyspan_usa28xa_product_id, | |
| .msg_format = msg_usa26, | |
| .num_ports = 2, | |
| .indat_endp_flip = 0, | |
| .outdat_endp_flip = 1, | |
| .indat_endpoints = {0x81, 0x83}, | |
| .outdat_endpoints = {0x01, 0x03}, | |
| .inack_endpoints = {0x85, 0x86}, | |
| .outcont_endpoints = {0x05, 0x06}, | |
| .instat_endpoint = 0x87, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = 0x07, | |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, | |
| .baudclk = KEYSPAN_USA28X_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details usa28xg_device_details = { | |
| .product_id = keyspan_usa28xg_product_id, | |
| .msg_format = msg_usa67, | |
| .num_ports = 2, | |
| .indat_endp_flip = 0, | |
| .outdat_endp_flip = 0, | |
| .indat_endpoints = {0x84, 0x88}, | |
| .outdat_endpoints = {0x02, 0x06}, | |
| .inack_endpoints = {-1, -1}, | |
| .outcont_endpoints = {-1, -1}, | |
| .instat_endpoint = 0x81, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = 0x01, | |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, | |
| .baudclk = KEYSPAN_USA28X_BAUDCLK, | |
| }; | |
| /* We don't need a separate entry for the usa28xb as it appears as a 28x anyway */ | |
| static const struct keyspan_device_details usa49w_device_details = { | |
| .product_id = keyspan_usa49w_product_id, | |
| .msg_format = msg_usa49, | |
| .num_ports = 4, | |
| .indat_endp_flip = 0, | |
| .outdat_endp_flip = 0, | |
| .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, | |
| .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, | |
| .inack_endpoints = {-1, -1, -1, -1}, | |
| .outcont_endpoints = {-1, -1, -1, -1}, | |
| .instat_endpoint = 0x87, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = 0x07, | |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, | |
| .baudclk = KEYSPAN_USA49W_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details usa49wlc_device_details = { | |
| .product_id = keyspan_usa49wlc_product_id, | |
| .msg_format = msg_usa49, | |
| .num_ports = 4, | |
| .indat_endp_flip = 0, | |
| .outdat_endp_flip = 0, | |
| .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, | |
| .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, | |
| .inack_endpoints = {-1, -1, -1, -1}, | |
| .outcont_endpoints = {-1, -1, -1, -1}, | |
| .instat_endpoint = 0x87, | |
| .indat_endpoint = -1, | |
| .glocont_endpoint = 0x07, | |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, | |
| .baudclk = KEYSPAN_USA19W_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details usa49wg_device_details = { | |
| .product_id = keyspan_usa49wg_product_id, | |
| .msg_format = msg_usa49, | |
| .num_ports = 4, | |
| .indat_endp_flip = 0, | |
| .outdat_endp_flip = 0, | |
| .indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */ | |
| .outdat_endpoints = {0x01, 0x02, 0x04, 0x06}, | |
| .inack_endpoints = {-1, -1, -1, -1}, | |
| .outcont_endpoints = {-1, -1, -1, -1}, | |
| .instat_endpoint = 0x81, | |
| .indat_endpoint = 0x88, | |
| .glocont_endpoint = 0x00, /* uses control EP */ | |
| .calculate_baud_rate = keyspan_usa19w_calc_baud, | |
| .baudclk = KEYSPAN_USA19W_BAUDCLK, | |
| }; | |
| static const struct keyspan_device_details *keyspan_devices[] = { | |
| &usa18x_device_details, | |
| &usa19_device_details, | |
| &usa19qi_device_details, | |
| &mpr_device_details, | |
| &usa19qw_device_details, | |
| &usa19w_device_details, | |
| &usa19hs_device_details, | |
| &usa28_device_details, | |
| &usa28x_device_details, | |
| &usa28xa_device_details, | |
| &usa28xg_device_details, | |
| /* 28xb not required as it renumerates as a 28x */ | |
| &usa49w_device_details, | |
| &usa49wlc_device_details, | |
| &usa49wg_device_details, | |
| NULL, | |
| }; | |
| static const struct usb_device_id keyspan_ids_combined[] = { | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)}, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, | |
| { } /* Terminating entry */ | |
| }; | |
| MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); | |
| static struct usb_driver keyspan_driver = { | |
| .name = "keyspan", | |
| .probe = usb_serial_probe, | |
| .disconnect = usb_serial_disconnect, | |
| .id_table = keyspan_ids_combined, | |
| .no_dynamic_id = 1, | |
| }; | |
| /* usb_device_id table for the pre-firmware download keyspan devices */ | |
| static const struct usb_device_id keyspan_pre_ids[] = { | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, | |
| { } /* Terminating entry */ | |
| }; | |
| static const struct usb_device_id keyspan_1port_ids[] = { | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, | |
| { } /* Terminating entry */ | |
| }; | |
| static const struct usb_device_id keyspan_2port_ids[] = { | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, | |
| { } /* Terminating entry */ | |
| }; | |
| static const struct usb_device_id keyspan_4port_ids[] = { | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) }, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, | |
| { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, | |
| { } /* Terminating entry */ | |
| }; | |
| /* Structs for the devices, pre and post renumeration. */ | |
| static struct usb_serial_driver keyspan_pre_device = { | |
| .driver = { | |
| .owner = THIS_MODULE, | |
| .name = "keyspan_no_firm", | |
| }, | |
| .description = "Keyspan - (without firmware)", | |
| .usb_driver = &keyspan_driver, | |
| .id_table = keyspan_pre_ids, | |
| .num_ports = 1, | |
| .attach = keyspan_fake_startup, | |
| }; | |
| static struct usb_serial_driver keyspan_1port_device = { | |
| .driver = { | |
| .owner = THIS_MODULE, | |
| .name = "keyspan_1", | |
| }, | |
| .description = "Keyspan 1 port adapter", | |
| .usb_driver = &keyspan_driver, | |
| .id_table = keyspan_1port_ids, | |
| .num_ports = 1, | |
| .open = keyspan_open, | |
| .close = keyspan_close, | |
| .dtr_rts = keyspan_dtr_rts, | |
| .write = keyspan_write, | |
| .write_room = keyspan_write_room, | |
| .set_termios = keyspan_set_termios, | |
| .break_ctl = keyspan_break_ctl, | |
| .tiocmget = keyspan_tiocmget, | |
| .tiocmset = keyspan_tiocmset, | |
| .attach = keyspan_startup, | |
| .disconnect = keyspan_disconnect, | |
| .release = keyspan_release, | |
| }; | |
| static struct usb_serial_driver keyspan_2port_device = { | |
| .driver = { | |
| .owner = THIS_MODULE, | |
| .name = "keyspan_2", | |
| }, | |
| .description = "Keyspan 2 port adapter", | |
| .usb_driver = &keyspan_driver, | |
| .id_table = keyspan_2port_ids, | |
| .num_ports = 2, | |
| .open = keyspan_open, | |
| .close = keyspan_close, | |
| .dtr_rts = keyspan_dtr_rts, | |
| .write = keyspan_write, | |
| .write_room = keyspan_write_room, | |
| .set_termios = keyspan_set_termios, | |
| .break_ctl = keyspan_break_ctl, | |
| .tiocmget = keyspan_tiocmget, | |
| .tiocmset = keyspan_tiocmset, | |
| .attach = keyspan_startup, | |
| .disconnect = keyspan_disconnect, | |
| .release = keyspan_release, | |
| }; | |
| static struct usb_serial_driver keyspan_4port_device = { | |
| .driver = { | |
| .owner = THIS_MODULE, | |
| .name = "keyspan_4", | |
| }, | |
| .description = "Keyspan 4 port adapter", | |
| .usb_driver = &keyspan_driver, | |
| .id_table = keyspan_4port_ids, | |
| .num_ports = 4, | |
| .open = keyspan_open, | |
| .close = keyspan_close, | |
| .dtr_rts = keyspan_dtr_rts, | |
| .write = keyspan_write, | |
| .write_room = keyspan_write_room, | |
| .set_termios = keyspan_set_termios, | |
| .break_ctl = keyspan_break_ctl, | |
| .tiocmget = keyspan_tiocmget, | |
| .tiocmset = keyspan_tiocmset, | |
| .attach = keyspan_startup, | |
| .disconnect = keyspan_disconnect, | |
| .release = keyspan_release, | |
| }; | |
| #endif |