| /* | |
| * Copyright (C) 2008-2009 MontaVista Software Inc. | |
| * Copyright (C) 2008-2009 Texas Instruments Inc | |
| * | |
| * Based on the LCD driver for TI Avalanche processors written by | |
| * Ajay Singh and Shalom Hai. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option)any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/fb.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/clk.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/console.h> | |
| #include <linux/slab.h> | |
| #include <video/da8xx-fb.h> | |
| #define DRIVER_NAME "da8xx_lcdc" | |
| /* LCD Status Register */ | |
| #define LCD_END_OF_FRAME1 BIT(9) | |
| #define LCD_END_OF_FRAME0 BIT(8) | |
| #define LCD_PL_LOAD_DONE BIT(6) | |
| #define LCD_FIFO_UNDERFLOW BIT(5) | |
| #define LCD_SYNC_LOST BIT(2) | |
| /* LCD DMA Control Register */ | |
| #define LCD_DMA_BURST_SIZE(x) ((x) << 4) | |
| #define LCD_DMA_BURST_1 0x0 | |
| #define LCD_DMA_BURST_2 0x1 | |
| #define LCD_DMA_BURST_4 0x2 | |
| #define LCD_DMA_BURST_8 0x3 | |
| #define LCD_DMA_BURST_16 0x4 | |
| #define LCD_END_OF_FRAME_INT_ENA BIT(2) | |
| #define LCD_DUAL_FRAME_BUFFER_ENABLE BIT(0) | |
| /* LCD Control Register */ | |
| #define LCD_CLK_DIVISOR(x) ((x) << 8) | |
| #define LCD_RASTER_MODE 0x01 | |
| /* LCD Raster Control Register */ | |
| #define LCD_PALETTE_LOAD_MODE(x) ((x) << 20) | |
| #define PALETTE_AND_DATA 0x00 | |
| #define PALETTE_ONLY 0x01 | |
| #define DATA_ONLY 0x02 | |
| #define LCD_MONO_8BIT_MODE BIT(9) | |
| #define LCD_RASTER_ORDER BIT(8) | |
| #define LCD_TFT_MODE BIT(7) | |
| #define LCD_UNDERFLOW_INT_ENA BIT(6) | |
| #define LCD_PL_ENABLE BIT(4) | |
| #define LCD_MONOCHROME_MODE BIT(1) | |
| #define LCD_RASTER_ENABLE BIT(0) | |
| #define LCD_TFT_ALT_ENABLE BIT(23) | |
| #define LCD_STN_565_ENABLE BIT(24) | |
| /* LCD Raster Timing 2 Register */ | |
| #define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16) | |
| #define LCD_AC_BIAS_FREQUENCY(x) ((x) << 8) | |
| #define LCD_SYNC_CTRL BIT(25) | |
| #define LCD_SYNC_EDGE BIT(24) | |
| #define LCD_INVERT_PIXEL_CLOCK BIT(22) | |
| #define LCD_INVERT_LINE_CLOCK BIT(21) | |
| #define LCD_INVERT_FRAME_CLOCK BIT(20) | |
| /* LCD Block */ | |
| #define LCD_CTRL_REG 0x4 | |
| #define LCD_STAT_REG 0x8 | |
| #define LCD_RASTER_CTRL_REG 0x28 | |
| #define LCD_RASTER_TIMING_0_REG 0x2C | |
| #define LCD_RASTER_TIMING_1_REG 0x30 | |
| #define LCD_RASTER_TIMING_2_REG 0x34 | |
| #define LCD_DMA_CTRL_REG 0x40 | |
| #define LCD_DMA_FRM_BUF_BASE_ADDR_0_REG 0x44 | |
| #define LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG 0x48 | |
| #define LCD_DMA_FRM_BUF_BASE_ADDR_1_REG 0x4C | |
| #define LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG 0x50 | |
| #define LCD_NUM_BUFFERS 2 | |
| #define WSI_TIMEOUT 50 | |
| #define PALETTE_SIZE 256 | |
| #define LEFT_MARGIN 64 | |
| #define RIGHT_MARGIN 64 | |
| #define UPPER_MARGIN 32 | |
| #define LOWER_MARGIN 32 | |
| static resource_size_t da8xx_fb_reg_base; | |
| static struct resource *lcdc_regs; | |
| static inline unsigned int lcdc_read(unsigned int addr) | |
| { | |
| return (unsigned int)__raw_readl(da8xx_fb_reg_base + (addr)); | |
| } | |
| static inline void lcdc_write(unsigned int val, unsigned int addr) | |
| { | |
| __raw_writel(val, da8xx_fb_reg_base + (addr)); | |
| } | |
| struct da8xx_fb_par { | |
| resource_size_t p_palette_base; | |
| unsigned char *v_palette_base; | |
| dma_addr_t vram_phys; | |
| unsigned long vram_size; | |
| void *vram_virt; | |
| unsigned int dma_start; | |
| unsigned int dma_end; | |
| struct clk *lcdc_clk; | |
| int irq; | |
| unsigned short pseudo_palette[16]; | |
| unsigned int palette_sz; | |
| unsigned int pxl_clk; | |
| int blank; | |
| wait_queue_head_t vsync_wait; | |
| int vsync_flag; | |
| int vsync_timeout; | |
| #ifdef CONFIG_CPU_FREQ | |
| struct notifier_block freq_transition; | |
| #endif | |
| void (*panel_power_ctrl)(int); | |
| }; | |
| /* Variable Screen Information */ | |
| static struct fb_var_screeninfo da8xx_fb_var __devinitdata = { | |
| .xoffset = 0, | |
| .yoffset = 0, | |
| .transp = {0, 0, 0}, | |
| .nonstd = 0, | |
| .activate = 0, | |
| .height = -1, | |
| .width = -1, | |
| .pixclock = 46666, /* 46us - AUO display */ | |
| .accel_flags = 0, | |
| .left_margin = LEFT_MARGIN, | |
| .right_margin = RIGHT_MARGIN, | |
| .upper_margin = UPPER_MARGIN, | |
| .lower_margin = LOWER_MARGIN, | |
| .sync = 0, | |
| .vmode = FB_VMODE_NONINTERLACED | |
| }; | |
| static struct fb_fix_screeninfo da8xx_fb_fix __devinitdata = { | |
| .id = "DA8xx FB Drv", | |
| .type = FB_TYPE_PACKED_PIXELS, | |
| .type_aux = 0, | |
| .visual = FB_VISUAL_PSEUDOCOLOR, | |
| .xpanstep = 0, | |
| .ypanstep = 1, | |
| .ywrapstep = 0, | |
| .accel = FB_ACCEL_NONE | |
| }; | |
| struct da8xx_panel { | |
| const char name[25]; /* Full name <vendor>_<model> */ | |
| unsigned short width; | |
| unsigned short height; | |
| int hfp; /* Horizontal front porch */ | |
| int hbp; /* Horizontal back porch */ | |
| int hsw; /* Horizontal Sync Pulse Width */ | |
| int vfp; /* Vertical front porch */ | |
| int vbp; /* Vertical back porch */ | |
| int vsw; /* Vertical Sync Pulse Width */ | |
| unsigned int pxl_clk; /* Pixel clock */ | |
| unsigned char invert_pxl_clk; /* Invert Pixel clock */ | |
| }; | |
| static struct da8xx_panel known_lcd_panels[] = { | |
| /* Sharp LCD035Q3DG01 */ | |
| [0] = { | |
| .name = "Sharp_LCD035Q3DG01", | |
| .width = 320, | |
| .height = 240, | |
| .hfp = 8, | |
| .hbp = 6, | |
| .hsw = 0, | |
| .vfp = 2, | |
| .vbp = 2, | |
| .vsw = 0, | |
| .pxl_clk = 4608000, | |
| .invert_pxl_clk = 1, | |
| }, | |
| /* Sharp LK043T1DG01 */ | |
| [1] = { | |
| .name = "Sharp_LK043T1DG01", | |
| .width = 480, | |
| .height = 272, | |
| .hfp = 2, | |
| .hbp = 2, | |
| .hsw = 41, | |
| .vfp = 2, | |
| .vbp = 2, | |
| .vsw = 10, | |
| .pxl_clk = 7833600, | |
| .invert_pxl_clk = 0, | |
| }, | |
| }; | |
| /* Enable the Raster Engine of the LCD Controller */ | |
| static inline void lcd_enable_raster(void) | |
| { | |
| u32 reg; | |
| reg = lcdc_read(LCD_RASTER_CTRL_REG); | |
| if (!(reg & LCD_RASTER_ENABLE)) | |
| lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG); | |
| } | |
| /* Disable the Raster Engine of the LCD Controller */ | |
| static inline void lcd_disable_raster(void) | |
| { | |
| u32 reg; | |
| reg = lcdc_read(LCD_RASTER_CTRL_REG); | |
| if (reg & LCD_RASTER_ENABLE) | |
| lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG); | |
| } | |
| static void lcd_blit(int load_mode, struct da8xx_fb_par *par) | |
| { | |
| u32 start; | |
| u32 end; | |
| u32 reg_ras; | |
| u32 reg_dma; | |
| /* init reg to clear PLM (loading mode) fields */ | |
| reg_ras = lcdc_read(LCD_RASTER_CTRL_REG); | |
| reg_ras &= ~(3 << 20); | |
| reg_dma = lcdc_read(LCD_DMA_CTRL_REG); | |
| if (load_mode == LOAD_DATA) { | |
| start = par->dma_start; | |
| end = par->dma_end; | |
| reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY); | |
| reg_dma |= LCD_END_OF_FRAME_INT_ENA; | |
| reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE; | |
| lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); | |
| lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); | |
| lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); | |
| lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); | |
| } else if (load_mode == LOAD_PALETTE) { | |
| start = par->p_palette_base; | |
| end = start + par->palette_sz - 1; | |
| reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY); | |
| reg_ras |= LCD_PL_ENABLE; | |
| lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); | |
| lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); | |
| } | |
| lcdc_write(reg_dma, LCD_DMA_CTRL_REG); | |
| lcdc_write(reg_ras, LCD_RASTER_CTRL_REG); | |
| /* | |
| * The Raster enable bit must be set after all other control fields are | |
| * set. | |
| */ | |
| lcd_enable_raster(); | |
| } | |
| /* Configure the Burst Size of DMA */ | |
| static int lcd_cfg_dma(int burst_size) | |
| { | |
| u32 reg; | |
| reg = lcdc_read(LCD_DMA_CTRL_REG) & 0x00000001; | |
| switch (burst_size) { | |
| case 1: | |
| reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1); | |
| break; | |
| case 2: | |
| reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2); | |
| break; | |
| case 4: | |
| reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4); | |
| break; | |
| case 8: | |
| reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8); | |
| break; | |
| case 16: | |
| reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| lcdc_write(reg, LCD_DMA_CTRL_REG); | |
| return 0; | |
| } | |
| static void lcd_cfg_ac_bias(int period, int transitions_per_int) | |
| { | |
| u32 reg; | |
| /* Set the AC Bias Period and Number of Transisitons per Interrupt */ | |
| reg = lcdc_read(LCD_RASTER_TIMING_2_REG) & 0xFFF00000; | |
| reg |= LCD_AC_BIAS_FREQUENCY(period) | | |
| LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int); | |
| lcdc_write(reg, LCD_RASTER_TIMING_2_REG); | |
| } | |
| static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width, | |
| int front_porch) | |
| { | |
| u32 reg; | |
| reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0xf; | |
| reg |= ((back_porch & 0xff) << 24) | |
| | ((front_porch & 0xff) << 16) | |
| | ((pulse_width & 0x3f) << 10); | |
| lcdc_write(reg, LCD_RASTER_TIMING_0_REG); | |
| } | |
| static void lcd_cfg_vertical_sync(int back_porch, int pulse_width, | |
| int front_porch) | |
| { | |
| u32 reg; | |
| reg = lcdc_read(LCD_RASTER_TIMING_1_REG) & 0x3ff; | |
| reg |= ((back_porch & 0xff) << 24) | |
| | ((front_porch & 0xff) << 16) | |
| | ((pulse_width & 0x3f) << 10); | |
| lcdc_write(reg, LCD_RASTER_TIMING_1_REG); | |
| } | |
| static int lcd_cfg_display(const struct lcd_ctrl_config *cfg) | |
| { | |
| u32 reg; | |
| reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(LCD_TFT_MODE | | |
| LCD_MONO_8BIT_MODE | | |
| LCD_MONOCHROME_MODE); | |
| switch (cfg->p_disp_panel->panel_shade) { | |
| case MONOCHROME: | |
| reg |= LCD_MONOCHROME_MODE; | |
| if (cfg->mono_8bit_mode) | |
| reg |= LCD_MONO_8BIT_MODE; | |
| break; | |
| case COLOR_ACTIVE: | |
| reg |= LCD_TFT_MODE; | |
| if (cfg->tft_alt_mode) | |
| reg |= LCD_TFT_ALT_ENABLE; | |
| break; | |
| case COLOR_PASSIVE: | |
| if (cfg->stn_565_mode) | |
| reg |= LCD_STN_565_ENABLE; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| /* enable additional interrupts here */ | |
| reg |= LCD_UNDERFLOW_INT_ENA; | |
| lcdc_write(reg, LCD_RASTER_CTRL_REG); | |
| reg = lcdc_read(LCD_RASTER_TIMING_2_REG); | |
| if (cfg->sync_ctrl) | |
| reg |= LCD_SYNC_CTRL; | |
| else | |
| reg &= ~LCD_SYNC_CTRL; | |
| if (cfg->sync_edge) | |
| reg |= LCD_SYNC_EDGE; | |
| else | |
| reg &= ~LCD_SYNC_EDGE; | |
| if (cfg->invert_line_clock) | |
| reg |= LCD_INVERT_LINE_CLOCK; | |
| else | |
| reg &= ~LCD_INVERT_LINE_CLOCK; | |
| if (cfg->invert_frm_clock) | |
| reg |= LCD_INVERT_FRAME_CLOCK; | |
| else | |
| reg &= ~LCD_INVERT_FRAME_CLOCK; | |
| lcdc_write(reg, LCD_RASTER_TIMING_2_REG); | |
| return 0; | |
| } | |
| static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, | |
| u32 bpp, u32 raster_order) | |
| { | |
| u32 reg; | |
| /* Set the Panel Width */ | |
| /* Pixels per line = (PPL + 1)*16 */ | |
| /*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/ | |
| width &= 0x3f0; | |
| reg = lcdc_read(LCD_RASTER_TIMING_0_REG); | |
| reg &= 0xfffffc00; | |
| reg |= ((width >> 4) - 1) << 4; | |
| lcdc_write(reg, LCD_RASTER_TIMING_0_REG); | |
| /* Set the Panel Height */ | |
| reg = lcdc_read(LCD_RASTER_TIMING_1_REG); | |
| reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00); | |
| lcdc_write(reg, LCD_RASTER_TIMING_1_REG); | |
| /* Set the Raster Order of the Frame Buffer */ | |
| reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(1 << 8); | |
| if (raster_order) | |
| reg |= LCD_RASTER_ORDER; | |
| lcdc_write(reg, LCD_RASTER_CTRL_REG); | |
| switch (bpp) { | |
| case 1: | |
| case 2: | |
| case 4: | |
| case 16: | |
| par->palette_sz = 16 * 2; | |
| break; | |
| case 8: | |
| par->palette_sz = 256 * 2; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, | |
| unsigned blue, unsigned transp, | |
| struct fb_info *info) | |
| { | |
| struct da8xx_fb_par *par = info->par; | |
| unsigned short *palette = (unsigned short *) par->v_palette_base; | |
| u_short pal; | |
| int update_hw = 0; | |
| if (regno > 255) | |
| return 1; | |
| if (info->fix.visual == FB_VISUAL_DIRECTCOLOR) | |
| return 1; | |
| if (info->var.bits_per_pixel == 8) { | |
| red >>= 4; | |
| green >>= 8; | |
| blue >>= 12; | |
| pal = (red & 0x0f00); | |
| pal |= (green & 0x00f0); | |
| pal |= (blue & 0x000f); | |
| if (palette[regno] != pal) { | |
| update_hw = 1; | |
| palette[regno] = pal; | |
| } | |
| } else if ((info->var.bits_per_pixel == 16) && regno < 16) { | |
| red >>= (16 - info->var.red.length); | |
| red <<= info->var.red.offset; | |
| green >>= (16 - info->var.green.length); | |
| green <<= info->var.green.offset; | |
| blue >>= (16 - info->var.blue.length); | |
| blue <<= info->var.blue.offset; | |
| par->pseudo_palette[regno] = red | green | blue; | |
| if (palette[0] != 0x4000) { | |
| update_hw = 1; | |
| palette[0] = 0x4000; | |
| } | |
| } | |
| /* Update the palette in the h/w as needed. */ | |
| if (update_hw) | |
| lcd_blit(LOAD_PALETTE, par); | |
| return 0; | |
| } | |
| static void lcd_reset(struct da8xx_fb_par *par) | |
| { | |
| /* Disable the Raster if previously Enabled */ | |
| lcd_disable_raster(); | |
| /* DMA has to be disabled */ | |
| lcdc_write(0, LCD_DMA_CTRL_REG); | |
| lcdc_write(0, LCD_RASTER_CTRL_REG); | |
| } | |
| static void lcd_calc_clk_divider(struct da8xx_fb_par *par) | |
| { | |
| unsigned int lcd_clk, div; | |
| lcd_clk = clk_get_rate(par->lcdc_clk); | |
| div = lcd_clk / par->pxl_clk; | |
| /* Configure the LCD clock divisor. */ | |
| lcdc_write(LCD_CLK_DIVISOR(div) | | |
| (LCD_RASTER_MODE & 0x1), LCD_CTRL_REG); | |
| } | |
| static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, | |
| struct da8xx_panel *panel) | |
| { | |
| u32 bpp; | |
| int ret = 0; | |
| lcd_reset(par); | |
| /* Calculate the divider */ | |
| lcd_calc_clk_divider(par); | |
| if (panel->invert_pxl_clk) | |
| lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) | | |
| LCD_INVERT_PIXEL_CLOCK), LCD_RASTER_TIMING_2_REG); | |
| else | |
| lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) & | |
| ~LCD_INVERT_PIXEL_CLOCK), LCD_RASTER_TIMING_2_REG); | |
| /* Configure the DMA burst size. */ | |
| ret = lcd_cfg_dma(cfg->dma_burst_sz); | |
| if (ret < 0) | |
| return ret; | |
| /* Configure the AC bias properties. */ | |
| lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt); | |
| /* Configure the vertical and horizontal sync properties. */ | |
| lcd_cfg_vertical_sync(panel->vbp, panel->vsw, panel->vfp); | |
| lcd_cfg_horizontal_sync(panel->hbp, panel->hsw, panel->hfp); | |
| /* Configure for disply */ | |
| ret = lcd_cfg_display(cfg); | |
| if (ret < 0) | |
| return ret; | |
| if (QVGA != cfg->p_disp_panel->panel_type) | |
| return -EINVAL; | |
| if (cfg->bpp <= cfg->p_disp_panel->max_bpp && | |
| cfg->bpp >= cfg->p_disp_panel->min_bpp) | |
| bpp = cfg->bpp; | |
| else | |
| bpp = cfg->p_disp_panel->max_bpp; | |
| if (bpp == 12) | |
| bpp = 16; | |
| ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->width, | |
| (unsigned int)panel->height, bpp, | |
| cfg->raster_order); | |
| if (ret < 0) | |
| return ret; | |
| /* Configure FDD */ | |
| lcdc_write((lcdc_read(LCD_RASTER_CTRL_REG) & 0xfff00fff) | | |
| (cfg->fdd << 12), LCD_RASTER_CTRL_REG); | |
| return 0; | |
| } | |
| static irqreturn_t lcdc_irq_handler(int irq, void *arg) | |
| { | |
| struct da8xx_fb_par *par = arg; | |
| u32 stat = lcdc_read(LCD_STAT_REG); | |
| u32 reg_ras; | |
| if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { | |
| lcd_disable_raster(); | |
| lcdc_write(stat, LCD_STAT_REG); | |
| lcd_enable_raster(); | |
| } else if (stat & LCD_PL_LOAD_DONE) { | |
| /* | |
| * Must disable raster before changing state of any control bit. | |
| * And also must be disabled before clearing the PL loading | |
| * interrupt via the following write to the status register. If | |
| * this is done after then one gets multiple PL done interrupts. | |
| */ | |
| lcd_disable_raster(); | |
| lcdc_write(stat, LCD_STAT_REG); | |
| /* Disable PL completion inerrupt */ | |
| reg_ras = lcdc_read(LCD_RASTER_CTRL_REG); | |
| reg_ras &= ~LCD_PL_ENABLE; | |
| lcdc_write(reg_ras, LCD_RASTER_CTRL_REG); | |
| /* Setup and start data loading mode */ | |
| lcd_blit(LOAD_DATA, par); | |
| } else { | |
| lcdc_write(stat, LCD_STAT_REG); | |
| if (stat & LCD_END_OF_FRAME0) { | |
| lcdc_write(par->dma_start, | |
| LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); | |
| lcdc_write(par->dma_end, | |
| LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); | |
| par->vsync_flag = 1; | |
| wake_up_interruptible(&par->vsync_wait); | |
| } | |
| if (stat & LCD_END_OF_FRAME1) { | |
| lcdc_write(par->dma_start, | |
| LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); | |
| lcdc_write(par->dma_end, | |
| LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); | |
| par->vsync_flag = 1; | |
| wake_up_interruptible(&par->vsync_wait); | |
| } | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int fb_check_var(struct fb_var_screeninfo *var, | |
| struct fb_info *info) | |
| { | |
| int err = 0; | |
| switch (var->bits_per_pixel) { | |
| case 1: | |
| case 8: | |
| var->red.offset = 0; | |
| var->red.length = 8; | |
| var->green.offset = 0; | |
| var->green.length = 8; | |
| var->blue.offset = 0; | |
| var->blue.length = 8; | |
| var->transp.offset = 0; | |
| var->transp.length = 0; | |
| break; | |
| case 4: | |
| var->red.offset = 0; | |
| var->red.length = 4; | |
| var->green.offset = 0; | |
| var->green.length = 4; | |
| var->blue.offset = 0; | |
| var->blue.length = 4; | |
| var->transp.offset = 0; | |
| var->transp.length = 0; | |
| break; | |
| case 16: /* RGB 565 */ | |
| var->red.offset = 11; | |
| var->red.length = 5; | |
| var->green.offset = 5; | |
| var->green.length = 6; | |
| var->blue.offset = 0; | |
| var->blue.length = 5; | |
| var->transp.offset = 0; | |
| var->transp.length = 0; | |
| break; | |
| default: | |
| err = -EINVAL; | |
| } | |
| var->red.msb_right = 0; | |
| var->green.msb_right = 0; | |
| var->blue.msb_right = 0; | |
| var->transp.msb_right = 0; | |
| return err; | |
| } | |
| #ifdef CONFIG_CPU_FREQ | |
| static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb, | |
| unsigned long val, void *data) | |
| { | |
| struct da8xx_fb_par *par; | |
| par = container_of(nb, struct da8xx_fb_par, freq_transition); | |
| if (val == CPUFREQ_PRECHANGE) { | |
| lcd_disable_raster(); | |
| } else if (val == CPUFREQ_POSTCHANGE) { | |
| lcd_calc_clk_divider(par); | |
| lcd_enable_raster(); | |
| } | |
| return 0; | |
| } | |
| static inline int lcd_da8xx_cpufreq_register(struct da8xx_fb_par *par) | |
| { | |
| par->freq_transition.notifier_call = lcd_da8xx_cpufreq_transition; | |
| return cpufreq_register_notifier(&par->freq_transition, | |
| CPUFREQ_TRANSITION_NOTIFIER); | |
| } | |
| static inline void lcd_da8xx_cpufreq_deregister(struct da8xx_fb_par *par) | |
| { | |
| cpufreq_unregister_notifier(&par->freq_transition, | |
| CPUFREQ_TRANSITION_NOTIFIER); | |
| } | |
| #endif | |
| static int __devexit fb_remove(struct platform_device *dev) | |
| { | |
| struct fb_info *info = dev_get_drvdata(&dev->dev); | |
| if (info) { | |
| struct da8xx_fb_par *par = info->par; | |
| #ifdef CONFIG_CPU_FREQ | |
| lcd_da8xx_cpufreq_deregister(par); | |
| #endif | |
| if (par->panel_power_ctrl) | |
| par->panel_power_ctrl(0); | |
| lcd_disable_raster(); | |
| lcdc_write(0, LCD_RASTER_CTRL_REG); | |
| /* disable DMA */ | |
| lcdc_write(0, LCD_DMA_CTRL_REG); | |
| unregister_framebuffer(info); | |
| fb_dealloc_cmap(&info->cmap); | |
| dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base, | |
| par->p_palette_base); | |
| dma_free_coherent(NULL, par->vram_size, par->vram_virt, | |
| par->vram_phys); | |
| free_irq(par->irq, par); | |
| clk_disable(par->lcdc_clk); | |
| clk_put(par->lcdc_clk); | |
| framebuffer_release(info); | |
| iounmap((void __iomem *)da8xx_fb_reg_base); | |
| release_mem_region(lcdc_regs->start, resource_size(lcdc_regs)); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Function to wait for vertical sync which for this LCD peripheral | |
| * translates into waiting for the current raster frame to complete. | |
| */ | |
| static int fb_wait_for_vsync(struct fb_info *info) | |
| { | |
| struct da8xx_fb_par *par = info->par; | |
| int ret; | |
| /* | |
| * Set flag to 0 and wait for isr to set to 1. It would seem there is a | |
| * race condition here where the ISR could have occurred just before or | |
| * just after this set. But since we are just coarsely waiting for | |
| * a frame to complete then that's OK. i.e. if the frame completed | |
| * just before this code executed then we have to wait another full | |
| * frame time but there is no way to avoid such a situation. On the | |
| * other hand if the frame completed just after then we don't need | |
| * to wait long at all. Either way we are guaranteed to return to the | |
| * user immediately after a frame completion which is all that is | |
| * required. | |
| */ | |
| par->vsync_flag = 0; | |
| ret = wait_event_interruptible_timeout(par->vsync_wait, | |
| par->vsync_flag != 0, | |
| par->vsync_timeout); | |
| if (ret < 0) | |
| return ret; | |
| if (ret == 0) | |
| return -ETIMEDOUT; | |
| return 0; | |
| } | |
| static int fb_ioctl(struct fb_info *info, unsigned int cmd, | |
| unsigned long arg) | |
| { | |
| struct lcd_sync_arg sync_arg; | |
| switch (cmd) { | |
| case FBIOGET_CONTRAST: | |
| case FBIOPUT_CONTRAST: | |
| case FBIGET_BRIGHTNESS: | |
| case FBIPUT_BRIGHTNESS: | |
| case FBIGET_COLOR: | |
| case FBIPUT_COLOR: | |
| return -ENOTTY; | |
| case FBIPUT_HSYNC: | |
| if (copy_from_user(&sync_arg, (char *)arg, | |
| sizeof(struct lcd_sync_arg))) | |
| return -EFAULT; | |
| lcd_cfg_horizontal_sync(sync_arg.back_porch, | |
| sync_arg.pulse_width, | |
| sync_arg.front_porch); | |
| break; | |
| case FBIPUT_VSYNC: | |
| if (copy_from_user(&sync_arg, (char *)arg, | |
| sizeof(struct lcd_sync_arg))) | |
| return -EFAULT; | |
| lcd_cfg_vertical_sync(sync_arg.back_porch, | |
| sync_arg.pulse_width, | |
| sync_arg.front_porch); | |
| break; | |
| case FBIO_WAITFORVSYNC: | |
| return fb_wait_for_vsync(info); | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int cfb_blank(int blank, struct fb_info *info) | |
| { | |
| struct da8xx_fb_par *par = info->par; | |
| int ret = 0; | |
| if (par->blank == blank) | |
| return 0; | |
| par->blank = blank; | |
| switch (blank) { | |
| case FB_BLANK_UNBLANK: | |
| if (par->panel_power_ctrl) | |
| par->panel_power_ctrl(1); | |
| lcd_enable_raster(); | |
| break; | |
| case FB_BLANK_POWERDOWN: | |
| if (par->panel_power_ctrl) | |
| par->panel_power_ctrl(0); | |
| lcd_disable_raster(); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Set new x,y offsets in the virtual display for the visible area and switch | |
| * to the new mode. | |
| */ | |
| static int da8xx_pan_display(struct fb_var_screeninfo *var, | |
| struct fb_info *fbi) | |
| { | |
| int ret = 0; | |
| struct fb_var_screeninfo new_var; | |
| struct da8xx_fb_par *par = fbi->par; | |
| struct fb_fix_screeninfo *fix = &fbi->fix; | |
| unsigned int end; | |
| unsigned int start; | |
| if (var->xoffset != fbi->var.xoffset || | |
| var->yoffset != fbi->var.yoffset) { | |
| memcpy(&new_var, &fbi->var, sizeof(new_var)); | |
| new_var.xoffset = var->xoffset; | |
| new_var.yoffset = var->yoffset; | |
| if (fb_check_var(&new_var, fbi)) | |
| ret = -EINVAL; | |
| else { | |
| memcpy(&fbi->var, &new_var, sizeof(new_var)); | |
| start = fix->smem_start + | |
| new_var.yoffset * fix->line_length + | |
| new_var.xoffset * var->bits_per_pixel / 8; | |
| end = start + var->yres * fix->line_length - 1; | |
| par->dma_start = start; | |
| par->dma_end = end; | |
| } | |
| } | |
| return ret; | |
| } | |
| static struct fb_ops da8xx_fb_ops = { | |
| .owner = THIS_MODULE, | |
| .fb_check_var = fb_check_var, | |
| .fb_setcolreg = fb_setcolreg, | |
| .fb_pan_display = da8xx_pan_display, | |
| .fb_ioctl = fb_ioctl, | |
| .fb_fillrect = cfb_fillrect, | |
| .fb_copyarea = cfb_copyarea, | |
| .fb_imageblit = cfb_imageblit, | |
| .fb_blank = cfb_blank, | |
| }; | |
| static int __devinit fb_probe(struct platform_device *device) | |
| { | |
| struct da8xx_lcdc_platform_data *fb_pdata = | |
| device->dev.platform_data; | |
| struct lcd_ctrl_config *lcd_cfg; | |
| struct da8xx_panel *lcdc_info; | |
| struct fb_info *da8xx_fb_info; | |
| struct clk *fb_clk = NULL; | |
| struct da8xx_fb_par *par; | |
| resource_size_t len; | |
| int ret, i; | |
| if (fb_pdata == NULL) { | |
| dev_err(&device->dev, "Can not get platform data\n"); | |
| return -ENOENT; | |
| } | |
| lcdc_regs = platform_get_resource(device, IORESOURCE_MEM, 0); | |
| if (!lcdc_regs) { | |
| dev_err(&device->dev, | |
| "Can not get memory resource for LCD controller\n"); | |
| return -ENOENT; | |
| } | |
| len = resource_size(lcdc_regs); | |
| lcdc_regs = request_mem_region(lcdc_regs->start, len, lcdc_regs->name); | |
| if (!lcdc_regs) | |
| return -EBUSY; | |
| da8xx_fb_reg_base = (resource_size_t)ioremap(lcdc_regs->start, len); | |
| if (!da8xx_fb_reg_base) { | |
| ret = -EBUSY; | |
| goto err_request_mem; | |
| } | |
| fb_clk = clk_get(&device->dev, NULL); | |
| if (IS_ERR(fb_clk)) { | |
| dev_err(&device->dev, "Can not get device clock\n"); | |
| ret = -ENODEV; | |
| goto err_ioremap; | |
| } | |
| ret = clk_enable(fb_clk); | |
| if (ret) | |
| goto err_clk_put; | |
| for (i = 0, lcdc_info = known_lcd_panels; | |
| i < ARRAY_SIZE(known_lcd_panels); | |
| i++, lcdc_info++) { | |
| if (strcmp(fb_pdata->type, lcdc_info->name) == 0) | |
| break; | |
| } | |
| if (i == ARRAY_SIZE(known_lcd_panels)) { | |
| dev_err(&device->dev, "GLCD: No valid panel found\n"); | |
| ret = -ENODEV; | |
| goto err_clk_disable; | |
| } else | |
| dev_info(&device->dev, "GLCD: Found %s panel\n", | |
| fb_pdata->type); | |
| lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data; | |
| da8xx_fb_info = framebuffer_alloc(sizeof(struct da8xx_fb_par), | |
| &device->dev); | |
| if (!da8xx_fb_info) { | |
| dev_dbg(&device->dev, "Memory allocation failed for fb_info\n"); | |
| ret = -ENOMEM; | |
| goto err_clk_disable; | |
| } | |
| par = da8xx_fb_info->par; | |
| par->lcdc_clk = fb_clk; | |
| par->pxl_clk = lcdc_info->pxl_clk; | |
| if (fb_pdata->panel_power_ctrl) { | |
| par->panel_power_ctrl = fb_pdata->panel_power_ctrl; | |
| par->panel_power_ctrl(1); | |
| } | |
| if (lcd_init(par, lcd_cfg, lcdc_info) < 0) { | |
| dev_err(&device->dev, "lcd_init failed\n"); | |
| ret = -EFAULT; | |
| goto err_release_fb; | |
| } | |
| /* allocate frame buffer */ | |
| par->vram_size = lcdc_info->width * lcdc_info->height * lcd_cfg->bpp; | |
| par->vram_size = PAGE_ALIGN(par->vram_size/8); | |
| par->vram_size = par->vram_size * LCD_NUM_BUFFERS; | |
| par->vram_virt = dma_alloc_coherent(NULL, | |
| par->vram_size, | |
| (resource_size_t *) &par->vram_phys, | |
| GFP_KERNEL | GFP_DMA); | |
| if (!par->vram_virt) { | |
| dev_err(&device->dev, | |
| "GLCD: kmalloc for frame buffer failed\n"); | |
| ret = -EINVAL; | |
| goto err_release_fb; | |
| } | |
| da8xx_fb_info->screen_base = (char __iomem *) par->vram_virt; | |
| da8xx_fb_fix.smem_start = par->vram_phys; | |
| da8xx_fb_fix.smem_len = par->vram_size; | |
| da8xx_fb_fix.line_length = (lcdc_info->width * lcd_cfg->bpp) / 8; | |
| par->dma_start = par->vram_phys; | |
| par->dma_end = par->dma_start + lcdc_info->height * | |
| da8xx_fb_fix.line_length - 1; | |
| /* allocate palette buffer */ | |
| par->v_palette_base = dma_alloc_coherent(NULL, | |
| PALETTE_SIZE, | |
| (resource_size_t *) | |
| &par->p_palette_base, | |
| GFP_KERNEL | GFP_DMA); | |
| if (!par->v_palette_base) { | |
| dev_err(&device->dev, | |
| "GLCD: kmalloc for palette buffer failed\n"); | |
| ret = -EINVAL; | |
| goto err_release_fb_mem; | |
| } | |
| memset(par->v_palette_base, 0, PALETTE_SIZE); | |
| par->irq = platform_get_irq(device, 0); | |
| if (par->irq < 0) { | |
| ret = -ENOENT; | |
| goto err_release_pl_mem; | |
| } | |
| /* Initialize par */ | |
| da8xx_fb_info->var.bits_per_pixel = lcd_cfg->bpp; | |
| da8xx_fb_var.xres = lcdc_info->width; | |
| da8xx_fb_var.xres_virtual = lcdc_info->width; | |
| da8xx_fb_var.yres = lcdc_info->height; | |
| da8xx_fb_var.yres_virtual = lcdc_info->height * LCD_NUM_BUFFERS; | |
| da8xx_fb_var.grayscale = | |
| lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0; | |
| da8xx_fb_var.bits_per_pixel = lcd_cfg->bpp; | |
| da8xx_fb_var.hsync_len = lcdc_info->hsw; | |
| da8xx_fb_var.vsync_len = lcdc_info->vsw; | |
| /* Initialize fbinfo */ | |
| da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT; | |
| da8xx_fb_info->fix = da8xx_fb_fix; | |
| da8xx_fb_info->var = da8xx_fb_var; | |
| da8xx_fb_info->fbops = &da8xx_fb_ops; | |
| da8xx_fb_info->pseudo_palette = par->pseudo_palette; | |
| da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ? | |
| FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; | |
| ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0); | |
| if (ret) | |
| goto err_release_pl_mem; | |
| da8xx_fb_info->cmap.len = par->palette_sz; | |
| /* initialize var_screeninfo */ | |
| da8xx_fb_var.activate = FB_ACTIVATE_FORCE; | |
| fb_set_var(da8xx_fb_info, &da8xx_fb_var); | |
| dev_set_drvdata(&device->dev, da8xx_fb_info); | |
| /* initialize the vsync wait queue */ | |
| init_waitqueue_head(&par->vsync_wait); | |
| par->vsync_timeout = HZ / 5; | |
| /* Register the Frame Buffer */ | |
| if (register_framebuffer(da8xx_fb_info) < 0) { | |
| dev_err(&device->dev, | |
| "GLCD: Frame Buffer Registration Failed!\n"); | |
| ret = -EINVAL; | |
| goto err_dealloc_cmap; | |
| } | |
| #ifdef CONFIG_CPU_FREQ | |
| ret = lcd_da8xx_cpufreq_register(par); | |
| if (ret) { | |
| dev_err(&device->dev, "failed to register cpufreq\n"); | |
| goto err_cpu_freq; | |
| } | |
| #endif | |
| ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par); | |
| if (ret) | |
| goto irq_freq; | |
| return 0; | |
| irq_freq: | |
| #ifdef CONFIG_CPU_FREQ | |
| lcd_da8xx_cpufreq_deregister(par); | |
| #endif | |
| err_cpu_freq: | |
| unregister_framebuffer(da8xx_fb_info); | |
| err_dealloc_cmap: | |
| fb_dealloc_cmap(&da8xx_fb_info->cmap); | |
| err_release_pl_mem: | |
| dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base, | |
| par->p_palette_base); | |
| err_release_fb_mem: | |
| dma_free_coherent(NULL, par->vram_size, par->vram_virt, par->vram_phys); | |
| err_release_fb: | |
| framebuffer_release(da8xx_fb_info); | |
| err_clk_disable: | |
| clk_disable(fb_clk); | |
| err_clk_put: | |
| clk_put(fb_clk); | |
| err_ioremap: | |
| iounmap((void __iomem *)da8xx_fb_reg_base); | |
| err_request_mem: | |
| release_mem_region(lcdc_regs->start, len); | |
| return ret; | |
| } | |
| #ifdef CONFIG_PM | |
| static int fb_suspend(struct platform_device *dev, pm_message_t state) | |
| { | |
| struct fb_info *info = platform_get_drvdata(dev); | |
| struct da8xx_fb_par *par = info->par; | |
| console_lock(); | |
| if (par->panel_power_ctrl) | |
| par->panel_power_ctrl(0); | |
| fb_set_suspend(info, 1); | |
| lcd_disable_raster(); | |
| clk_disable(par->lcdc_clk); | |
| console_unlock(); | |
| return 0; | |
| } | |
| static int fb_resume(struct platform_device *dev) | |
| { | |
| struct fb_info *info = platform_get_drvdata(dev); | |
| struct da8xx_fb_par *par = info->par; | |
| console_lock(); | |
| if (par->panel_power_ctrl) | |
| par->panel_power_ctrl(1); | |
| clk_enable(par->lcdc_clk); | |
| lcd_enable_raster(); | |
| fb_set_suspend(info, 0); | |
| console_unlock(); | |
| return 0; | |
| } | |
| #else | |
| #define fb_suspend NULL | |
| #define fb_resume NULL | |
| #endif | |
| static struct platform_driver da8xx_fb_driver = { | |
| .probe = fb_probe, | |
| .remove = __devexit_p(fb_remove), | |
| .suspend = fb_suspend, | |
| .resume = fb_resume, | |
| .driver = { | |
| .name = DRIVER_NAME, | |
| .owner = THIS_MODULE, | |
| }, | |
| }; | |
| static int __init da8xx_fb_init(void) | |
| { | |
| return platform_driver_register(&da8xx_fb_driver); | |
| } | |
| static void __exit da8xx_fb_cleanup(void) | |
| { | |
| platform_driver_unregister(&da8xx_fb_driver); | |
| } | |
| module_init(da8xx_fb_init); | |
| module_exit(da8xx_fb_cleanup); | |
| MODULE_DESCRIPTION("Framebuffer driver for TI da8xx/omap-l1xx"); | |
| MODULE_AUTHOR("Texas Instruments"); | |
| MODULE_LICENSE("GPL"); |