| # SPDX-License-Identifier: GPL-2.0-only | |
| # | |
| # Magnetometer sensors | |
| # | |
| # When adding new entries keep the list in alphabetical order | |
| menu "Magnetometer sensors" | |
| config AF8133J | |
| tristate "Voltafield AF8133J 3-Axis Magnetometer" | |
| depends on I2C | |
| depends on OF | |
| select REGMAP_I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Voltafield AF8133J I2C-based | |
| 3-axis magnetometer chip. | |
| To compile this driver as a module, choose M here: the module | |
| will be called af8133j. | |
| config AK8974 | |
| tristate "Asahi Kasei AK8974 3-Axis Magnetometer" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Asahi Kasei AK8974, AMI305 or | |
| AMI306 I2C-based 3-axis magnetometer chips. | |
| To compile this driver as a module, choose M here: the module | |
| will be called ak8974. | |
| config AK8975 | |
| tristate "Asahi Kasei AK8975 3-Axis Magnetometer" | |
| depends on I2C | |
| depends on GPIOLIB || COMPILE_TEST | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Asahi Kasei AK8975, AK8963, | |
| AK09911, AK09912, AK09916 or AK09918 3-Axis Magnetometer. | |
| To compile this driver as a module, choose M here: the module | |
| will be called ak8975. | |
| config AK09911 | |
| tristate "Asahi Kasei AK09911 3-axis Compass" | |
| depends on I2C | |
| depends on GPIOLIB || COMPILE_TEST | |
| select AK8975 | |
| help | |
| Deprecated: AK09911 is now supported by AK8975 driver. | |
| config ALS31300 | |
| tristate "Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for the Allegro MicroSystems | |
| ALS31300 Hall Effect Sensor through its I2C interface. | |
| To compile this driver as a module, choose M here: the | |
| module will be called als31300. | |
| config BMC150_MAGN | |
| tristate | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| config BMC150_MAGN_I2C | |
| tristate "Bosch BMC150 I2C Magnetometer Driver" | |
| depends on I2C | |
| select BMC150_MAGN | |
| select REGMAP_I2C | |
| help | |
| Say yes here to build support for the BMC150 magnetometer with | |
| I2C interface. | |
| This is a combo module with both accelerometer and magnetometer. | |
| This driver is only implementing magnetometer part, which has | |
| its own address and register map. | |
| This driver also supports I2C Bosch BMC156 and BMM150 chips. | |
| To compile this driver as a module, choose M here: the module will be | |
| called bmc150_magn_i2c. | |
| config BMC150_MAGN_SPI | |
| tristate "Bosch BMC150 SPI Magnetometer Driver" | |
| depends on SPI | |
| select BMC150_MAGN | |
| select REGMAP_SPI | |
| help | |
| Say yes here to build support for the BMC150 magnetometer with | |
| SPI interface. | |
| This is a combo module with both accelerometer and magnetometer. | |
| This driver is only implementing magnetometer part, which has | |
| its own address and register map. | |
| This driver also supports SPI Bosch BMC156 and BMM150 chips. | |
| To compile this driver as a module, choose M here: the module will be | |
| called bmc150_magn_spi. | |
| config MAG3110 | |
| tristate "Freescale MAG3110 3-Axis Magnetometer" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for the Freescale MAG3110 3-Axis | |
| magnetometer. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mag3110. | |
| config HID_SENSOR_MAGNETOMETER_3D | |
| depends on HID_SENSOR_HUB | |
| select IIO_BUFFER | |
| select HID_SENSOR_IIO_COMMON | |
| select HID_SENSOR_IIO_TRIGGER | |
| tristate "HID Magnetometer 3D" | |
| help | |
| Say yes here to build support for the HID SENSOR | |
| Magnetometer 3D. | |
| config MMC35240 | |
| tristate "MEMSIC MMC35240 3-axis magnetic sensor" | |
| select REGMAP_I2C | |
| depends on I2C | |
| help | |
| Say yes here to build support for the MEMSIC MMC35240 3-axis | |
| magnetic sensor. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mmc35240. | |
| config MMC5633 | |
| tristate "MEMSIC MMC5633 3-axis magnetic sensor" | |
| select REGMAP_I2C | |
| select REGMAP_I3C if I3C | |
| depends on I3C_OR_I2C | |
| help | |
| Say yes here to build support for the MEMSIC MMC5633 3-axis | |
| magnetic sensor. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mmc5633 | |
| config MMC5983 | |
| tristate "MEMSIC MMC5983 3-axis magnetic sensor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say yes here to build support for the MEMSIC MMC5983 3-axis | |
| magnetic sensor. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mmc5983 | |
| config IIO_ST_MAGN_3AXIS | |
| tristate "STMicroelectronics magnetometers 3-Axis Driver" | |
| depends on (I2C || SPI_MASTER) && SYSFS | |
| select IIO_ST_SENSORS_CORE | |
| select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) | |
| help | |
| Say yes here to build support for STMicroelectronics magnetometers: | |
| LSM303C, LSM303DLHC, LSM303DLM, LIS3MDL. | |
| Also need to enable at least one of I2C and SPI interface drivers | |
| below. | |
| config IIO_ST_MAGN_I2C_3AXIS | |
| tristate "STMicroelectronics magnetometers 3-Axis I2C Interface" | |
| depends on I2C && IIO_ST_MAGN_3AXIS | |
| default I2C && IIO_ST_MAGN_3AXIS | |
| select IIO_ST_SENSORS_I2C | |
| help | |
| Build support for STMicroelectronics magnetometers I2C interface. | |
| To compile this driver as a module, choose M here. The module | |
| will be called st_magn_i2c. | |
| config IIO_ST_MAGN_SPI_3AXIS | |
| tristate "STMicroelectronics magnetometers 3-Axis SPI Interface" | |
| depends on SPI_MASTER && IIO_ST_MAGN_3AXIS | |
| default SPI_MASTER && IIO_ST_MAGN_3AXIS | |
| select IIO_ST_SENSORS_SPI | |
| help | |
| Build support for STMicroelectronics magnetometers SPI interface. | |
| To compile this driver as a module, choose M here. The module | |
| will be called st_magn_spi. | |
| config INFINEON_TLV493D | |
| tristate "Infineon TLV493D Low-Power 3D Magnetic Sensor" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say Y here to add support for the Infineon TLV493D-A1B6 Low- | |
| Power 3D Magnetic Sensor. | |
| This driver can also be compiled as a module. | |
| To compile this driver as a module, choose M here: the module | |
| will be called tlv493d. | |
| config QMC5883L | |
| tristate "QST QMC5883L 3-Axis Magnetic Sensor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say Y here to add support driver for QST QMC5883L 3-Axis | |
| Magnetic Sensor. | |
| To compile this driver as a module, choose M here: the | |
| module will be called qmc5883l. | |
| config QMC6308 | |
| tristate "QST QMC6308 3-Axis Magnetic Sensor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say Y here to add support for the QST QMC6308 3-Axis | |
| Magnetic Sensor. | |
| To compile this driver as a module, choose M here: the | |
| module will be called qmc6308. | |
| config SENSORS_HMC5843 | |
| tristate | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| config SENSORS_HMC5843_I2C | |
| tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" | |
| depends on I2C | |
| select SENSORS_HMC5843 | |
| select REGMAP_I2C | |
| help | |
| Say Y here to add support for the Honeywell HMC5843, HMC5883 and | |
| HMC5883L 3-Axis Magnetometer (digital compass). | |
| This driver can also be compiled as a set of modules. | |
| If so, these modules will be created: | |
| - hmc5843_core (core functions) | |
| - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) | |
| config SENSORS_HMC5843_SPI | |
| tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" | |
| depends on SPI_MASTER | |
| select SENSORS_HMC5843 | |
| select REGMAP_SPI | |
| help | |
| Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer | |
| (digital compass). | |
| This driver can also be compiled as a set of modules. | |
| If so, these modules will be created: | |
| - hmc5843_core (core functions) | |
| - hmc5843_spi (support for HMC5983) | |
| config SENSORS_RM3100 | |
| tristate | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| config SENSORS_RM3100_I2C | |
| tristate "PNI RM3100 3-Axis Magnetometer (I2C)" | |
| depends on I2C | |
| select SENSORS_RM3100 | |
| select REGMAP_I2C | |
| help | |
| Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. | |
| This driver can also be compiled as a module. | |
| To compile this driver as a module, choose M here: the module | |
| will be called rm3100-i2c. | |
| config SENSORS_RM3100_SPI | |
| tristate "PNI RM3100 3-Axis Magnetometer (SPI)" | |
| depends on SPI_MASTER | |
| select SENSORS_RM3100 | |
| select REGMAP_SPI | |
| help | |
| Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. | |
| This driver can also be compiled as a module. | |
| To compile this driver as a module, choose M here: the module | |
| will be called rm3100-spi. | |
| config SI7210 | |
| tristate "SI7210 Hall effect sensor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say Y here to add support for the SI7210 Hall effect sensor. | |
| This driver can also be compiled as a module. | |
| To compile this driver as a module, choose M here: the module | |
| will be called si7210. | |
| config TI_TMAG5273 | |
| tristate "TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say Y here to add support for the TI TMAG5273 Low-Power | |
| Linear 3D Hall-Effect Sensor. | |
| This driver can also be compiled as a module. | |
| To compile this driver as a module, choose M here: the module | |
| will be called tmag5273. | |
| config YAMAHA_YAS530 | |
| tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say Y here to add support for the Yamaha YAS530 series of | |
| 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are | |
| supported. | |
| This driver can also be compiled as a module. | |
| To compile this driver as a module, choose M here: the module | |
| will be called yamaha-yas. | |
| endmenu |