| # SPDX-License-Identifier: GPL-2.0 | |
| if LEDS_CLASS_FLASH | |
| config LEDS_AAT1290 | |
| tristate "LED support for the AAT1290" | |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS | |
| depends on GPIOLIB || COMPILE_TEST | |
| depends on OF | |
| depends on PINCTRL | |
| help | |
| This option enables support for the LEDs on the AAT1290. | |
| config LEDS_AS3645A | |
| tristate "AS3645A and LM3555 LED flash controllers support" | |
| depends on I2C | |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS | |
| help | |
| Enable LED flash class support for AS3645A LED flash | |
| controller. V4L2 flash API is provided as well if | |
| CONFIG_V4L2_FLASH_API is enabled. | |
| config LEDS_KTD2692 | |
| tristate "LED support for Kinetic KTD2692 flash LED controller" | |
| depends on OF | |
| depends on GPIOLIB | |
| select LEDS_EXPRESSWIRE | |
| help | |
| This option enables support for Kinetic KTD2692 LED flash connected | |
| through ExpressWire interface. | |
| Say Y to enable this driver. | |
| config LEDS_LM3601X | |
| tristate "LED support for LM3601x Chips" | |
| depends on LEDS_CLASS && I2C | |
| select REGMAP_I2C | |
| help | |
| This option enables support for the TI LM3601x family | |
| of flash, torch and indicator classes. | |
| config LEDS_MAX77693 | |
| tristate "LED support for MAX77693 Flash" | |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS | |
| depends on MFD_MAX77693 | |
| depends on OF | |
| help | |
| This option enables support for the flash part of the MAX77693 | |
| multifunction device. It has build in control for two leds in flash | |
| and torch mode. | |
| config LEDS_MT6360 | |
| tristate "LED Support for Mediatek MT6360 PMIC" | |
| depends on LEDS_CLASS && OF | |
| depends on LEDS_CLASS_FLASH | |
| depends on LEDS_CLASS_MULTICOLOR | |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS | |
| depends on MFD_MT6360 | |
| help | |
| This option enables support for dual Flash LED drivers found on | |
| Mediatek MT6360 PMIC. | |
| Independent current sources supply for each flash LED support torch | |
| and strobe mode. | |
| config LEDS_MT6370_FLASH | |
| tristate "Flash LED Support for MediaTek MT6370 PMIC" | |
| depends on LEDS_CLASS | |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS | |
| depends on MFD_MT6370 | |
| help | |
| Support 2 channels and torch/strobe mode. | |
| Say Y here to enable support for | |
| MT6370_FLASH_LED device. | |
| This driver can also be built as a module. If so, the module | |
| will be called "leds-mt6370-flash". | |
| config LEDS_QCOM_FLASH | |
| tristate "LED support for flash module inside Qualcomm PMIC" | |
| depends on MFD_SPMI_PMIC || COMPILE_TEST | |
| depends on LEDS_CLASS && OF | |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS | |
| select REGMAP | |
| help | |
| This option enables support for the flash module found in Qualcomm | |
| Technologies, Inc. PMICs. The flash module can have 3 or 4 flash LED | |
| channels and each channel is programmable to support up to 1.5 A full | |
| scale current. It also supports connecting two channels' output together | |
| to supply one LED component to achieve current up to 2 A. In such case, | |
| the total LED current will be split symmetrically on each channel and | |
| they will be enabled/disabled at the same time. | |
| This driver can be built as a module, it will be called "leds-qcom-flash". | |
| config LEDS_RT4505 | |
| tristate "LED support for RT4505 flashlight controller" | |
| depends on I2C && OF | |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS | |
| select REGMAP_I2C | |
| help | |
| This option enables support for the RT4505 flash LED controller. | |
| RT4505 includes torch and flash functions with programmable current. | |
| And it's commonly used to compensate the illuminance for the camera | |
| inside the mobile product like as phones or tablets. | |
| config LEDS_RT8515 | |
| tristate "LED support for Richtek RT8515 flash/torch LED" | |
| depends on GPIOLIB | |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS | |
| help | |
| This option enables support for the Richtek RT8515 flash | |
| and torch LEDs found on some mobile phones. | |
| To compile this driver as a module, choose M here: the module | |
| will be called leds-rt8515. | |
| config LEDS_S2M_FLASH | |
| tristate "Samsung S2M series PMICs flash/torch LED support" | |
| depends on LEDS_CLASS | |
| depends on MFD_SEC_CORE | |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS | |
| help | |
| This option enables support for the flash/torch LEDs found in certain | |
| Samsung S2M series PMICs, such as the S2MU005. It has a LED channel | |
| dedicated for every physical LED. The LEDs can be controlled in flash | |
| and torch modes. | |
| config LEDS_SGM3140 | |
| tristate "LED support for the SGM3140" | |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS | |
| help | |
| This option enables support for the SGM3140 500mA Buck/Boost Charge | |
| Pump LED Driver. | |
| config LEDS_SY7802 | |
| tristate "LED support for the Silergy SY7802" | |
| depends on I2C && OF | |
| depends on GPIOLIB | |
| select REGMAP_I2C | |
| help | |
| This option enables support for the SY7802 flash LED controller. | |
| SY7802 includes torch and flash functions with programmable current. | |
| This driver can be built as a module, it will be called "leds-sy7802". | |
| config LEDS_TPS6131X | |
| tristate "LED support for TI TPS6131x flash LED driver" | |
| depends on I2C && OF | |
| depends on GPIOLIB | |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS | |
| select REGMAP_I2C | |
| help | |
| This option enables support for Texas Instruments TPS61310/TPS61311 | |
| flash LED driver. | |
| This driver can be built as a module, it will be called "leds-tps6131x". | |
| endif # LEDS_CLASS_FLASH |