| # SPDX-License-Identifier: GPL-2.0-only | |
| menu "Distributed Switch Architecture drivers" | |
| depends on NET_DSA | |
| source "drivers/net/dsa/b53/Kconfig" | |
| config NET_DSA_BCM_SF2 | |
| tristate "Broadcom Starfighter 2 Ethernet switch support" | |
| depends on HAS_IOMEM | |
| select NET_DSA_TAG_BRCM | |
| select FIXED_PHY | |
| select BCM7XXX_PHY | |
| select MDIO_BCM_UNIMAC | |
| select B53 | |
| help | |
| This enables support for the Broadcom Starfighter 2 Ethernet | |
| switch chips. | |
| config NET_DSA_LOOP | |
| tristate "DSA mock-up Ethernet switch chip support" | |
| select NET_DSA_TAG_NONE | |
| select FIXED_PHY | |
| help | |
| This enables support for a fake mock-up switch chip which | |
| exercises the DSA APIs. | |
| source "drivers/net/dsa/hirschmann/Kconfig" | |
| source "drivers/net/dsa/lantiq/Kconfig" | |
| config NET_DSA_MT7530 | |
| tristate "MediaTek MT7530 and MT7531 Ethernet switch support" | |
| select NET_DSA_TAG_MTK | |
| select REGMAP_IRQ | |
| imply NET_DSA_MT7530_MDIO | |
| imply NET_DSA_MT7530_MMIO | |
| help | |
| This enables support for the MediaTek MT7530 and MT7531 Ethernet | |
| switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT, | |
| MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are | |
| supported as well. | |
| config NET_DSA_MT7530_MDIO | |
| tristate "MediaTek MT7530 MDIO interface driver" | |
| depends on NET_DSA_MT7530 | |
| select MEDIATEK_GE_PHY | |
| select PCS_MTK_LYNXI | |
| help | |
| This enables support for the MediaTek MT7530 and MT7531 switch | |
| chips which are connected via MDIO, as well as multi-chip | |
| module MT7530 which can be found in the MT7621AT, MT7621DAT, | |
| MT7621ST and MT7623AI SoCs. | |
| config NET_DSA_MT7530_MMIO | |
| tristate "MediaTek MT7530 MMIO interface driver" | |
| depends on NET_DSA_MT7530 | |
| depends on HAS_IOMEM | |
| imply MEDIATEK_GE_SOC_PHY | |
| help | |
| This enables support for the built-in Ethernet switch found | |
| in the MediaTek MT7988 SoC. | |
| The switch is a similar design as MT7531, but the switch registers | |
| are directly mapped into the SoCs register space rather than being | |
| accessible via MDIO. | |
| config NET_DSA_MT7628 | |
| tristate "MediaTek MT7628 Embedded Ethernet switch support" | |
| depends on HAS_IOMEM && (SOC_MT7620 || COMPILE_TEST) | |
| select NET_DSA_TAG_MT7628 | |
| select MEDIATEK_FE_SOC_PHY | |
| select REGMAP_MMIO | |
| help | |
| This enables support for the built-in Ethernet switch found | |
| in the MT7628 SoC. | |
| config NET_DSA_MV88E6060 | |
| tristate "Marvell 88E6060 ethernet switch chip support" | |
| select NET_DSA_TAG_TRAILER | |
| help | |
| This enables support for the Marvell 88E6060 ethernet switch | |
| chip. | |
| source "drivers/net/dsa/microchip/Kconfig" | |
| source "drivers/net/dsa/mv88e6xxx/Kconfig" | |
| source "drivers/net/dsa/mxl862xx/Kconfig" | |
| source "drivers/net/dsa/netc/Kconfig" | |
| source "drivers/net/dsa/ocelot/Kconfig" | |
| source "drivers/net/dsa/qca/Kconfig" | |
| source "drivers/net/dsa/sja1105/Kconfig" | |
| source "drivers/net/dsa/xrs700x/Kconfig" | |
| source "drivers/net/dsa/realtek/Kconfig" | |
| config NET_DSA_RZN1_A5PSW | |
| tristate "Renesas RZ/N1 A5PSW Ethernet switch support" | |
| depends on OF && (ARCH_RZN1 || COMPILE_TEST) | |
| select NET_DSA_TAG_RZN1_A5PSW | |
| select PCS_RZN1_MIIC | |
| help | |
| This driver supports the A5PSW switch, which is embedded in Renesas | |
| RZ/N1 SoC. | |
| config NET_DSA_KS8995 | |
| tristate "Micrel KS8995 family 5-ports 10/100 Ethernet switches" | |
| depends on SPI | |
| select NET_DSA_TAG_NONE | |
| help | |
| This driver supports the Micrel KS8995 family of 10/100 Mbit ethernet | |
| switches, managed over SPI. | |
| config NET_DSA_SMSC_LAN9303 | |
| tristate | |
| select NET_DSA_TAG_LAN9303 | |
| select REGMAP | |
| imply SMSC_PHY | |
| help | |
| This enables support for the Microchip LAN9303/LAN9354 3 port ethernet | |
| switch chips. | |
| config NET_DSA_SMSC_LAN9303_I2C | |
| tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode" | |
| depends on I2C | |
| depends on VLAN_8021Q || VLAN_8021Q=n | |
| select NET_DSA_SMSC_LAN9303 | |
| select REGMAP_I2C | |
| help | |
| Enable access functions if the SMSC/Microchip LAN9303 is configured | |
| for I2C managed mode. | |
| config NET_DSA_SMSC_LAN9303_MDIO | |
| tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode" | |
| select NET_DSA_SMSC_LAN9303 | |
| depends on VLAN_8021Q || VLAN_8021Q=n | |
| help | |
| Enable access functions if the Microchip LAN9303/LAN9354 is configured | |
| for MDIO managed mode. | |
| config NET_DSA_VITESSE_VSC73XX | |
| tristate | |
| select NET_DSA_TAG_VSC73XX_8021Q | |
| select FIXED_PHY | |
| select VITESSE_PHY | |
| select GPIOLIB | |
| help | |
| This enables support for the Vitesse VSC7385, VSC7388, | |
| VSC7395 and VSC7398 SparX integrated ethernet switches. | |
| config NET_DSA_VITESSE_VSC73XX_SPI | |
| tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support" | |
| depends on SPI | |
| select NET_DSA_VITESSE_VSC73XX | |
| help | |
| This enables support for the Vitesse VSC7385, VSC7388, VSC7395 | |
| and VSC7398 SparX integrated ethernet switches in SPI managed mode. | |
| config NET_DSA_VITESSE_VSC73XX_PLATFORM | |
| tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support" | |
| depends on HAS_IOMEM | |
| select NET_DSA_VITESSE_VSC73XX | |
| help | |
| This enables support for the Vitesse VSC7385, VSC7388, VSC7395 | |
| and VSC7398 SparX integrated ethernet switches, connected over | |
| a CPU-attached address bus and work in memory-mapped I/O mode. | |
| config NET_DSA_YT921X | |
| tristate "Motorcomm YT9215 ethernet switch chip support" | |
| select NET_DSA_TAG_YT921X | |
| select NET_IEEE8021Q_HELPERS if DCB | |
| help | |
| This enables support for the Motorcomm YT9215 ethernet switch | |
| chip. | |
| endmenu |