| From 3bda2e5df476417b6d08967e2d84234a59d57b1c Mon Sep 17 00:00:00 2001 |
| From: Guangbin Huang <huangguangbin2@huawei.com> |
| Date: Wed, 27 Oct 2021 20:11:43 +0800 |
| Subject: net: hns3: fix pause config problem after autoneg disabled |
| |
| From: Guangbin Huang <huangguangbin2@huawei.com> |
| |
| commit 3bda2e5df476417b6d08967e2d84234a59d57b1c upstream. |
| |
| If a TP port is configured by follow steps: |
| 1.ethtool -s ethx autoneg off speed 100 duplex full |
| 2.ethtool -A ethx rx on tx on |
| 3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off) |
| 4.ethtool -s ethx autoneg off speed 100 duplex full |
| |
| In step 3, driver will set rx&tx pause parameters of hardware to off as |
| pause parameters negotiated with link partner are off. |
| |
| After step 4, the "ethtool -a ethx" command shows both rx and tx pause |
| parameters are on. However, pause parameters of hardware are still off |
| and port has no flow control function actually. |
| |
| To fix this problem, if autoneg is disabled, driver uses its saved |
| parameters to restore pause of hardware. If the speed is not changed in |
| this case, there is no link state changed for phy, it will cause the pause |
| parameter is not taken effect, so we need to force phy to go down and up. |
| |
| Fixes: aacbe27e82f0 ("net: hns3: modify how pause options is displayed") |
| Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> |
| Signed-off-by: David S. Miller <davem@davemloft.net> |
| Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
| --- |
| drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 |
| drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 33 +++++++++++----- |
| drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 30 ++++++++++++++ |
| drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 |
| drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 1 |
| 5 files changed, 57 insertions(+), 10 deletions(-) |
| |
| --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h |
| +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h |
| @@ -568,6 +568,7 @@ struct hnae3_ae_ops { |
| u32 *auto_neg, u32 *rx_en, u32 *tx_en); |
| int (*set_pauseparam)(struct hnae3_handle *handle, |
| u32 auto_neg, u32 rx_en, u32 tx_en); |
| + int (*restore_pauseparam)(struct hnae3_handle *handle); |
| |
| int (*set_autoneg)(struct hnae3_handle *handle, bool enable); |
| int (*get_autoneg)(struct hnae3_handle *handle); |
| --- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c |
| +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c |
| @@ -838,6 +838,26 @@ static int hns3_check_ksettings_param(co |
| return 0; |
| } |
| |
| +static int hns3_set_phy_link_ksettings(struct net_device *netdev, |
| + const struct ethtool_link_ksettings *cmd) |
| +{ |
| + struct hnae3_handle *handle = hns3_get_handle(netdev); |
| + const struct hnae3_ae_ops *ops = handle->ae_algo->ops; |
| + int ret; |
| + |
| + if (cmd->base.speed == SPEED_1000 && |
| + cmd->base.autoneg == AUTONEG_DISABLE) |
| + return -EINVAL; |
| + |
| + if (cmd->base.autoneg == AUTONEG_DISABLE && ops->restore_pauseparam) { |
| + ret = ops->restore_pauseparam(handle); |
| + if (ret) |
| + return ret; |
| + } |
| + |
| + return phy_ethtool_ksettings_set(netdev->phydev, cmd); |
| +} |
| + |
| static int hns3_set_link_ksettings(struct net_device *netdev, |
| const struct ethtool_link_ksettings *cmd) |
| { |
| @@ -856,16 +876,11 @@ static int hns3_set_link_ksettings(struc |
| cmd->base.autoneg, cmd->base.speed, cmd->base.duplex); |
| |
| /* Only support ksettings_set for netdev with phy attached for now */ |
| - if (netdev->phydev) { |
| - if (cmd->base.speed == SPEED_1000 && |
| - cmd->base.autoneg == AUTONEG_DISABLE) |
| - return -EINVAL; |
| - |
| - return phy_ethtool_ksettings_set(netdev->phydev, cmd); |
| - } else if (test_bit(HNAE3_DEV_SUPPORT_PHY_IMP_B, ae_dev->caps) && |
| - ops->set_phy_link_ksettings) { |
| + if (netdev->phydev) |
| + return hns3_set_phy_link_ksettings(netdev, cmd); |
| + else if (test_bit(HNAE3_DEV_SUPPORT_PHY_IMP_B, ae_dev->caps) && |
| + ops->set_phy_link_ksettings) |
| return ops->set_phy_link_ksettings(handle, cmd); |
| - } |
| |
| if (ae_dev->dev_version < HNAE3_DEVICE_VERSION_V2) |
| return -EOPNOTSUPP; |
| --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c |
| +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c |
| @@ -11014,6 +11014,35 @@ static int hclge_set_pauseparam(struct h |
| return -EOPNOTSUPP; |
| } |
| |
| +static int hclge_restore_pauseparam(struct hnae3_handle *handle) |
| +{ |
| + struct hclge_vport *vport = hclge_get_vport(handle); |
| + struct hclge_dev *hdev = vport->back; |
| + u32 auto_neg, rx_pause, tx_pause; |
| + int ret; |
| + |
| + hclge_get_pauseparam(handle, &auto_neg, &rx_pause, &tx_pause); |
| + /* when autoneg is disabled, the pause setting of phy has no effect |
| + * unless the link goes down. |
| + */ |
| + ret = phy_suspend(hdev->hw.mac.phydev); |
| + if (ret) |
| + return ret; |
| + |
| + phy_set_asym_pause(hdev->hw.mac.phydev, rx_pause, tx_pause); |
| + |
| + ret = phy_resume(hdev->hw.mac.phydev); |
| + if (ret) |
| + return ret; |
| + |
| + ret = hclge_mac_pause_setup_hw(hdev); |
| + if (ret) |
| + dev_err(&hdev->pdev->dev, |
| + "restore pauseparam error, ret = %d.\n", ret); |
| + |
| + return ret; |
| +} |
| + |
| static void hclge_get_ksettings_an_result(struct hnae3_handle *handle, |
| u8 *auto_neg, u32 *speed, u8 *duplex) |
| { |
| @@ -12943,6 +12972,7 @@ static const struct hnae3_ae_ops hclge_o |
| .halt_autoneg = hclge_halt_autoneg, |
| .get_pauseparam = hclge_get_pauseparam, |
| .set_pauseparam = hclge_set_pauseparam, |
| + .restore_pauseparam = hclge_restore_pauseparam, |
| .set_mtu = hclge_set_mtu, |
| .reset_queue = hclge_reset_tqp, |
| .get_stats = hclge_get_stats, |
| --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c |
| +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c |
| @@ -1435,7 +1435,7 @@ static int hclge_bp_setup_hw(struct hclg |
| return 0; |
| } |
| |
| -static int hclge_mac_pause_setup_hw(struct hclge_dev *hdev) |
| +int hclge_mac_pause_setup_hw(struct hclge_dev *hdev) |
| { |
| bool tx_en, rx_en; |
| |
| --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h |
| +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h |
| @@ -244,6 +244,7 @@ int hclge_tm_get_pri_weight(struct hclge |
| int hclge_tm_get_pri_shaper(struct hclge_dev *hdev, u8 pri_id, |
| enum hclge_opcode_type cmd, |
| struct hclge_tm_shaper_para *para); |
| +int hclge_mac_pause_setup_hw(struct hclge_dev *hdev); |
| int hclge_tm_get_q_to_qs_map(struct hclge_dev *hdev, u16 q_id, u16 *qset_id); |
| int hclge_tm_get_q_to_tc(struct hclge_dev *hdev, u16 q_id, u8 *tc_id); |
| int hclge_tm_get_pg_to_pri_map(struct hclge_dev *hdev, u8 pg_id, |