queue-6.6/ata-libata-scsi-fix-cdl-control.patch

From 58768b0563916ddcb73d8ed26ede664915f8df31 Mon Sep 17 00:00:00 2001
From: Igor Pylypiv <ipylypiv@google.com>
Date: Wed, 13 Aug 2025 19:22:56 -0700
Subject: ata: libata-scsi: Fix CDL control

From: Igor Pylypiv <ipylypiv@google.com>

commit 58768b0563916ddcb73d8ed26ede664915f8df31 upstream.

Delete extra checks for the ATA_DFLAG_CDL_ENABLED flag that prevent
SET FEATURES command from being issued to a drive when NCQ commands
are active.

ata_mselect_control_ata_feature() sets / clears the ATA_DFLAG_CDL_ENABLED
flag during the translation of MODE SELECT to SET FEATURES. If SET FEATURES
gets deferred due to outstanding NCQ commands, the original MODE SELECT
command will be re-queued. When the re-queued MODE SELECT goes through
the ata_mselect_control_ata_feature() translation again, SET FEATURES
will not be issued because ATA_DFLAG_CDL_ENABLED has been already set or
cleared by the initial translation of MODE SELECT.

The ATA_DFLAG_CDL_ENABLED checks in ata_mselect_control_ata_feature()
are safe to remove because scsi_cdl_enable() implements a similar logic
that avoids enabling CDL if it has been enabled already.

Fixes: 17e897a45675 ("ata: libata-scsi: Improve CDL control")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ata/libata-scsi.c |   11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3782,21 +3782,16 @@ static int ata_mselect_control_ata_featu
 	/* Check cdl_ctrl */
 	switch (buf[0] & 0x03) {
 	case 0:
-		/* Disable CDL if it is enabled */
-		if (!(dev->flags & ATA_DFLAG_CDL_ENABLED))
-			return 0;
+		/* Disable CDL */
 		ata_dev_dbg(dev, "Disabling CDL\n");
 		cdl_action = 0;
 		dev->flags &= ~ATA_DFLAG_CDL_ENABLED;
 		break;
 	case 0x02:
 		/*
-		 * Enable CDL if not already enabled. Since this is mutually
-		 * exclusive with NCQ priority, allow this only if NCQ priority
-		 * is disabled.
+		 * Enable CDL. Since CDL is mutually exclusive with NCQ
+		 * priority, allow this only if NCQ priority is disabled.
 		 */
-		if (dev->flags & ATA_DFLAG_CDL_ENABLED)
-			return 0;
 		if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED) {
 			ata_dev_err(dev,
 				"NCQ priority must be disabled to enable CDL\n");