| From 3687f641307eeff6f7fe31a88dc39db88e89238b Mon Sep 17 00:00:00 2001 |
| From: Peter Stuge <peter@stuge.se> |
| Date: Mon, 10 Oct 2011 03:34:54 +0200 |
| Subject: USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board |
| |
| From: Peter Stuge <peter@stuge.se> |
| |
| commit 3687f641307eeff6f7fe31a88dc39db88e89238b upstream. |
| |
| Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard, |
| and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger |
| Interface Board. The ICDI board can also be used stand-alone, for |
| other boards and chips than the kit it came with. The ICDI has both |
| old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm |
| pitch connector. |
| |
| Tested with EK-LM3S9B90, where the BD-ICDI board is included. |
| |
| Signed-off-by: Peter Stuge <peter@stuge.se> |
| Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
| |
| --- |
| drivers/usb/serial/ftdi_sio.c | 2 ++ |
| drivers/usb/serial/ftdi_sio_ids.h | 1 + |
| 2 files changed, 3 insertions(+) |
| |
| --- a/drivers/usb/serial/ftdi_sio.c |
| +++ b/drivers/usb/serial/ftdi_sio.c |
| @@ -747,6 +747,8 @@ static struct usb_device_id id_table_com |
| .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, |
| { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID), |
| .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, |
| + { USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID), |
| + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, |
| { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), |
| .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, |
| { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, |
| --- a/drivers/usb/serial/ftdi_sio_ids.h |
| +++ b/drivers/usb/serial/ftdi_sio_ids.h |
| @@ -54,6 +54,7 @@ |
| /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ |
| #define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 |
| #define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 |
| +#define LMI_LM3S_ICDI_BOARD_PID 0xbcda |
| |
| #define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */ |
| |
