blob: 643da1e823567441c5667c95bd061fcb00462d1f [file] [log] [blame]
From 2a700d8edffdbfb8200332d96c3147e042b337f1 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hans.verkuil@cisco.com>
Date: Mon, 13 Apr 2015 11:18:51 -0300
Subject: [media] marvell-ccic: fix Y'CbCr ordering
From: Hans Verkuil <hans.verkuil@cisco.com>
commit 2a700d8edffdbfb8200332d96c3147e042b337f1 upstream.
Various formats had their byte ordering implemented incorrectly, and
the V4L2_PIX_FMT_UYVY is actually impossible to create, instead you
get V4L2_PIX_FMT_YVYU.
This was working before commit ad6ac452227b7cb93ac79beec092850d178740b1
("add new formats support for marvell-ccic driver"). That commit broke
the original format support and the OLPC XO-1 laptop showed wrong
colors ever since (if you are crazy enough to attempt to run the latest
kernel on it, like I did).
The email addresses of the authors of that patch are no longer valid,
so without a way to reach them and ask them about their test setup
I am going with what I can test on the OLPC laptop.
If this breaks something for someone on their non-OLPC setup, then
contact the linux-media mailinglist. My suspicion however is that
that commit went in untested.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/platform/marvell-ccic/mcam-core.c | 14 +++++++-------
drivers/media/platform/marvell-ccic/mcam-core.h | 8 ++++----
2 files changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -116,8 +116,8 @@ static struct mcam_format_struct {
.planar = false,
},
{
- .desc = "UYVY 4:2:2",
- .pixelformat = V4L2_PIX_FMT_UYVY,
+ .desc = "YVYU 4:2:2",
+ .pixelformat = V4L2_PIX_FMT_YVYU,
.mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
.bpp = 2,
.planar = false,
@@ -748,7 +748,7 @@ static void mcam_ctlr_image(struct mcam_
switch (fmt->pixelformat) {
case V4L2_PIX_FMT_YUYV:
- case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YVYU:
widthy = fmt->width * 2;
widthuv = 0;
break;
@@ -784,15 +784,15 @@ static void mcam_ctlr_image(struct mcam_
case V4L2_PIX_FMT_YUV420:
case V4L2_PIX_FMT_YVU420:
mcam_reg_write_mask(cam, REG_CTRL0,
- C0_DF_YUV | C0_YUV_420PL | C0_YUVE_YVYU, C0_DF_MASK);
+ C0_DF_YUV | C0_YUV_420PL | C0_YUVE_VYUY, C0_DF_MASK);
break;
case V4L2_PIX_FMT_YUYV:
mcam_reg_write_mask(cam, REG_CTRL0,
- C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_UYVY, C0_DF_MASK);
+ C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_NOSWAP, C0_DF_MASK);
break;
- case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YVYU:
mcam_reg_write_mask(cam, REG_CTRL0,
- C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, C0_DF_MASK);
+ C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_SWAP24, C0_DF_MASK);
break;
case V4L2_PIX_FMT_JPEG:
mcam_reg_write_mask(cam, REG_CTRL0,
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -330,10 +330,10 @@ int mccic_resume(struct mcam_camera *cam
#define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */
#define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */
#define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */
-#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */
-#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */
-#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */
-#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */
+#define C0_YUVE_NOSWAP 0x00000000 /* no bytes swapping */
+#define C0_YUVE_SWAP13 0x00010000 /* swap byte 1 and 3 */
+#define C0_YUVE_SWAP24 0x00020000 /* swap byte 2 and 4 */
+#define C0_YUVE_SWAP1324 0x00030000 /* swap bytes 1&3 and 2&4 */
/* Bayer bits 18,19 if needed */
#define C0_EOF_VSYNC 0x00400000 /* Generate EOF by VSYNC */
#define C0_VEDGE_CTRL 0x00800000 /* Detect falling edge of VSYNC */