| From foo@baz Wed Mar 28 20:16:33 CEST 2018 |
| From: Guillaume Nault <g.nault@alphalink.fr> |
| Date: Tue, 20 Mar 2018 16:49:26 +0100 |
| Subject: ppp: avoid loop in xmit recursion detection code |
| |
| From: Guillaume Nault <g.nault@alphalink.fr> |
| |
| |
| [ Upstream commit 6d066734e9f09cdea4a3b9cb76136db3f29cfb02 ] |
| |
| We already detect situations where a PPP channel sends packets back to |
| its upper PPP device. While this is enough to avoid deadlocking on xmit |
| locks, this doesn't prevent packets from looping between the channel |
| and the unit. |
| |
| The problem is that ppp_start_xmit() enqueues packets in ppp->file.xq |
| before checking for xmit recursion. Therefore, __ppp_xmit_process() |
| might dequeue a packet from ppp->file.xq and send it on the channel |
| which, in turn, loops it back on the unit. Then ppp_start_xmit() |
| queues the packet back to ppp->file.xq and __ppp_xmit_process() picks |
| it up and sends it again through the channel. Therefore, the packet |
| will loop between __ppp_xmit_process() and ppp_start_xmit() until some |
| other part of the xmit path drops it. |
| |
| For L2TP, we rapidly fill the skb's headroom and pppol2tp_xmit() drops |
| the packet after a few iterations. But PPTP reallocates the headroom |
| if necessary, letting the loop run and exhaust the machine resources |
| (as reported in https://bugzilla.kernel.org/show_bug.cgi?id=199109). |
| |
| Fix this by letting __ppp_xmit_process() enqueue the skb to |
| ppp->file.xq, so that we can check for recursion before adding it to |
| the queue. Now ppp_xmit_process() can drop the packet when recursion is |
| detected. |
| |
| __ppp_channel_push() is a bit special. It calls __ppp_xmit_process() |
| without having any actual packet to send. This is used by |
| ppp_output_wakeup() to re-enable transmission on the parent unit (for |
| implementations like ppp_async.c, where the .start_xmit() function |
| might not consume the skb, leaving it in ppp->xmit_pending and |
| disabling transmission). |
| Therefore, __ppp_xmit_process() needs to handle the case where skb is |
| NULL, dequeuing as many packets as possible from ppp->file.xq. |
| |
| Reported-by: xu heng <xuheng333@zoho.com> |
| Fixes: 55454a565836 ("ppp: avoid dealock on recursive xmit") |
| Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> |
| Signed-off-by: David S. Miller <davem@davemloft.net> |
| Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
| --- |
| drivers/net/ppp/ppp_generic.c | 26 ++++++++++++++------------ |
| 1 file changed, 14 insertions(+), 12 deletions(-) |
| |
| --- a/drivers/net/ppp/ppp_generic.c |
| +++ b/drivers/net/ppp/ppp_generic.c |
| @@ -255,7 +255,7 @@ struct ppp_net { |
| /* Prototypes. */ |
| static int ppp_unattached_ioctl(struct net *net, struct ppp_file *pf, |
| struct file *file, unsigned int cmd, unsigned long arg); |
| -static void ppp_xmit_process(struct ppp *ppp); |
| +static void ppp_xmit_process(struct ppp *ppp, struct sk_buff *skb); |
| static void ppp_send_frame(struct ppp *ppp, struct sk_buff *skb); |
| static void ppp_push(struct ppp *ppp); |
| static void ppp_channel_push(struct channel *pch); |
| @@ -511,13 +511,12 @@ static ssize_t ppp_write(struct file *fi |
| goto out; |
| } |
| |
| - skb_queue_tail(&pf->xq, skb); |
| - |
| switch (pf->kind) { |
| case INTERFACE: |
| - ppp_xmit_process(PF_TO_PPP(pf)); |
| + ppp_xmit_process(PF_TO_PPP(pf), skb); |
| break; |
| case CHANNEL: |
| + skb_queue_tail(&pf->xq, skb); |
| ppp_channel_push(PF_TO_CHANNEL(pf)); |
| break; |
| } |
| @@ -1261,8 +1260,8 @@ ppp_start_xmit(struct sk_buff *skb, stru |
| put_unaligned_be16(proto, pp); |
| |
| skb_scrub_packet(skb, !net_eq(ppp->ppp_net, dev_net(dev))); |
| - skb_queue_tail(&ppp->file.xq, skb); |
| - ppp_xmit_process(ppp); |
| + ppp_xmit_process(ppp, skb); |
| + |
| return NETDEV_TX_OK; |
| |
| outf: |
| @@ -1416,13 +1415,14 @@ static void ppp_setup(struct net_device |
| */ |
| |
| /* Called to do any work queued up on the transmit side that can now be done */ |
| -static void __ppp_xmit_process(struct ppp *ppp) |
| +static void __ppp_xmit_process(struct ppp *ppp, struct sk_buff *skb) |
| { |
| - struct sk_buff *skb; |
| - |
| ppp_xmit_lock(ppp); |
| if (!ppp->closing) { |
| ppp_push(ppp); |
| + |
| + if (skb) |
| + skb_queue_tail(&ppp->file.xq, skb); |
| while (!ppp->xmit_pending && |
| (skb = skb_dequeue(&ppp->file.xq))) |
| ppp_send_frame(ppp, skb); |
| @@ -1436,7 +1436,7 @@ static void __ppp_xmit_process(struct pp |
| ppp_xmit_unlock(ppp); |
| } |
| |
| -static void ppp_xmit_process(struct ppp *ppp) |
| +static void ppp_xmit_process(struct ppp *ppp, struct sk_buff *skb) |
| { |
| local_bh_disable(); |
| |
| @@ -1444,7 +1444,7 @@ static void ppp_xmit_process(struct ppp |
| goto err; |
| |
| (*this_cpu_ptr(ppp->xmit_recursion))++; |
| - __ppp_xmit_process(ppp); |
| + __ppp_xmit_process(ppp, skb); |
| (*this_cpu_ptr(ppp->xmit_recursion))--; |
| |
| local_bh_enable(); |
| @@ -1454,6 +1454,8 @@ static void ppp_xmit_process(struct ppp |
| err: |
| local_bh_enable(); |
| |
| + kfree_skb(skb); |
| + |
| if (net_ratelimit()) |
| netdev_err(ppp->dev, "recursion detected\n"); |
| } |
| @@ -1938,7 +1940,7 @@ static void __ppp_channel_push(struct ch |
| if (skb_queue_empty(&pch->file.xq)) { |
| ppp = pch->ppp; |
| if (ppp) |
| - __ppp_xmit_process(ppp); |
| + __ppp_xmit_process(ppp, NULL); |
| } |
| } |
| |