releases/5.1.10/pci-rcar-fix-64bit-msi-message-address-handling.patch

From 7d238f5dac2c2e76264134a1cf96c58cd24d99b0 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut+renesas@gmail.com>
Date: Mon, 25 Mar 2019 12:41:01 +0100
Subject: PCI: rcar: Fix 64bit MSI message address handling

[ Upstream commit 954b4b752a4c4e963b017ed8cef4c453c5ed308d ]

The MSI message address in the RC address space can be 64 bit. The
R-Car PCIe RC supports such a 64bit MSI message address as well.
The code currently uses virt_to_phys(__get_free_pages()) to obtain
a reserved page for the MSI message address, and the return value
of which can be a 64 bit physical address on 64 bit system.

However, the driver only programs PCIEMSIALR register with the bottom
32 bits of the virt_to_phys(__get_free_pages()) return value and does
not program the top 32 bits into PCIEMSIAUR, but rather programs the
PCIEMSIAUR register with 0x0. This worked fine on older 32 bit R-Car
SoCs, however may fail on new 64 bit R-Car SoCs.

Since from a PCIe controller perspective, an inbound MSI is a memory
write to a special address (in case of this controller, defined by
the value in PCIEMSIAUR:PCIEMSIALR), which triggers an interrupt, but
never hits the DRAM _and_ because allocation of an MSI by a PCIe card
driver obtains the MSI message address by reading PCIEMSIAUR:PCIEMSIALR
in rcar_msi_setup_irqs(), incorrectly programmed PCIEMSIAUR cannot
cause memory corruption or other issues.

There is however the possibility that if virt_to_phys(__get_free_pages())
returned address above the 32bit boundary _and_ PCIEMSIAUR was programmed
to 0x0 _and_ if the system had physical RAM at the address matching the
value of PCIEMSIALR, a PCIe card driver could allocate a buffer with a
physical address matching the value of PCIEMSIALR and a remote write to
such a buffer by a PCIe card would trigger a spurious MSI.

Fixes: e015f88c368d ("PCI: rcar: Add support for R-Car H3 to pcie-rcar")
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-rcar.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index 765c39911c0c..9b9c677ad3a0 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -892,7 +892,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
 	struct rcar_msi *msi = &pcie->msi;
-	unsigned long base;
+	phys_addr_t base;
 	int err, i;
 
 	mutex_init(&msi->lock);
@@ -937,8 +937,8 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
 	}
 	base = virt_to_phys((void *)msi->pages);
 
-	rcar_pci_write_reg(pcie, base | MSIFE, PCIEMSIALR);
-	rcar_pci_write_reg(pcie, 0, PCIEMSIAUR);
+	rcar_pci_write_reg(pcie, lower_32_bits(base) | MSIFE, PCIEMSIALR);
+	rcar_pci_write_reg(pcie, upper_32_bits(base), PCIEMSIAUR);
 
 	/* enable all MSI interrupts */
 	rcar_pci_write_reg(pcie, 0xffffffff, PCIEMSIIER);
-- 
2.20.1