| From 089d9b6e59631d46124c40f4232079e5ccc91a24 Mon Sep 17 00:00:00 2001 |
| From: Sasha Levin <sashal@kernel.org> |
| Date: Sat, 18 Jan 2025 19:43:43 +0100 |
| Subject: net: phy: marvell-88q2xxx: Fix temperature measurement with |
| reset-gpios |
| MIME-Version: 1.0 |
| Content-Type: text/plain; charset=UTF-8 |
| Content-Transfer-Encoding: 8bit |
| |
| From: Dimitri Fedrau <dima.fedrau@gmail.com> |
| |
| [ Upstream commit a197004cf3c2e6c8cc0695c787a97e62e3229754 ] |
| |
| When using temperature measurement on Marvell 88Q2XXX devices and the |
| reset-gpios property is set in DT, the device does a hardware reset when |
| interface is brought down and up again. That means that the content of |
| the register MDIO_MMD_PCS_MV_TEMP_SENSOR2 is reset to default and that |
| leads to permanent deactivation of the temperature measurement, because |
| activation is done in mv88q2xxx_probe. To fix this move activation of |
| temperature measurement to mv88q222x_config_init. |
| |
| Fixes: a557a92e6881 ("net: phy: marvell-88q2xxx: add support for temperature sensor") |
| Reviewed-by: Niklas Sรถderlund <niklas.soderlund+renesas@ragnatech.se> |
| Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> |
| Reviewed-by: Andrew Lunn <andrew@lunn.ch> |
| Link: https://patch.msgid.link/20250118-marvell-88q2xxx-fix-hwmon-v2-1-402e62ba2dcb@gmail.com |
| Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
| Signed-off-by: Sasha Levin <sashal@kernel.org> |
| --- |
| drivers/net/phy/marvell-88q2xxx.c | 33 ++++++++++++++++++++++++------- |
| 1 file changed, 26 insertions(+), 7 deletions(-) |
| |
| diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c |
| index c812f16eaa3a8..b3a5a0af19da6 100644 |
| --- a/drivers/net/phy/marvell-88q2xxx.c |
| +++ b/drivers/net/phy/marvell-88q2xxx.c |
| @@ -95,6 +95,10 @@ |
| |
| #define MDIO_MMD_PCS_MV_TDR_OFF_CUTOFF 65246 |
| |
| +struct mv88q2xxx_priv { |
| + bool enable_temp; |
| +}; |
| + |
| struct mmd_val { |
| int devad; |
| u32 regnum; |
| @@ -669,17 +673,12 @@ static const struct hwmon_chip_info mv88q2xxx_hwmon_chip_info = { |
| |
| static int mv88q2xxx_hwmon_probe(struct phy_device *phydev) |
| { |
| + struct mv88q2xxx_priv *priv = phydev->priv; |
| struct device *dev = &phydev->mdio.dev; |
| struct device *hwmon; |
| char *hwmon_name; |
| - int ret; |
| - |
| - /* Enable temperature sense */ |
| - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TEMP_SENSOR2, |
| - MDIO_MMD_PCS_MV_TEMP_SENSOR2_DIS_MASK, 0); |
| - if (ret < 0) |
| - return ret; |
| |
| + priv->enable_temp = true; |
| hwmon_name = devm_hwmon_sanitize_name(dev, dev_name(dev)); |
| if (IS_ERR(hwmon_name)) |
| return PTR_ERR(hwmon_name); |
| @@ -702,6 +701,14 @@ static int mv88q2xxx_hwmon_probe(struct phy_device *phydev) |
| |
| static int mv88q2xxx_probe(struct phy_device *phydev) |
| { |
| + struct mv88q2xxx_priv *priv; |
| + |
| + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); |
| + if (!priv) |
| + return -ENOMEM; |
| + |
| + phydev->priv = priv; |
| + |
| return mv88q2xxx_hwmon_probe(phydev); |
| } |
| |
| @@ -792,6 +799,18 @@ static int mv88q222x_revb1_revb2_config_init(struct phy_device *phydev) |
| |
| static int mv88q222x_config_init(struct phy_device *phydev) |
| { |
| + struct mv88q2xxx_priv *priv = phydev->priv; |
| + int ret; |
| + |
| + /* Enable temperature sense */ |
| + if (priv->enable_temp) { |
| + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, |
| + MDIO_MMD_PCS_MV_TEMP_SENSOR2, |
| + MDIO_MMD_PCS_MV_TEMP_SENSOR2_DIS_MASK, 0); |
| + if (ret < 0) |
| + return ret; |
| + } |
| + |
| if (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB0) |
| return mv88q222x_revb0_config_init(phydev); |
| else |
| -- |
| 2.39.5 |
| |