| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * CPU idle driver for Tegra CPUs | 
 |  * | 
 |  * Copyright (c) 2010-2013, NVIDIA Corporation. | 
 |  * Copyright (c) 2011 Google, Inc. | 
 |  * Author: Colin Cross <ccross@android.com> | 
 |  *         Gary King <gking@nvidia.com> | 
 |  * | 
 |  * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> | 
 |  * | 
 |  * Tegra20/124 driver unification by Dmitry Osipenko <digetx@gmail.com> | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt)	"tegra-cpuidle: " fmt | 
 |  | 
 | #include <linux/atomic.h> | 
 | #include <linux/cpuidle.h> | 
 | #include <linux/cpumask.h> | 
 | #include <linux/cpu_pm.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/types.h> | 
 |  | 
 | #include <linux/clk/tegra.h> | 
 | #include <linux/firmware/trusted_foundations.h> | 
 |  | 
 | #include <soc/tegra/cpuidle.h> | 
 | #include <soc/tegra/flowctrl.h> | 
 | #include <soc/tegra/fuse.h> | 
 | #include <soc/tegra/irq.h> | 
 | #include <soc/tegra/pm.h> | 
 | #include <soc/tegra/pmc.h> | 
 |  | 
 | #include <asm/cpuidle.h> | 
 | #include <asm/firmware.h> | 
 | #include <asm/smp_plat.h> | 
 | #include <asm/suspend.h> | 
 |  | 
 | enum tegra_state { | 
 | 	TEGRA_C1, | 
 | 	TEGRA_C7, | 
 | 	TEGRA_CC6, | 
 | 	TEGRA_STATE_COUNT, | 
 | }; | 
 |  | 
 | static atomic_t tegra_idle_barrier; | 
 | static atomic_t tegra_abort_flag; | 
 |  | 
 | static void tegra_cpuidle_report_cpus_state(void) | 
 | { | 
 | 	unsigned long cpu, lcpu, csr; | 
 |  | 
 | 	for_each_cpu(lcpu, cpu_possible_mask) { | 
 | 		cpu = cpu_logical_map(lcpu); | 
 | 		csr = flowctrl_read_cpu_csr(cpu); | 
 |  | 
 | 		pr_err("cpu%lu: online=%d flowctrl_csr=0x%08lx\n", | 
 | 		       cpu, cpu_online(lcpu), csr); | 
 | 	} | 
 | } | 
 |  | 
 | static int tegra_cpuidle_wait_for_secondary_cpus_parking(void) | 
 | { | 
 | 	unsigned int retries = 3; | 
 |  | 
 | 	while (retries--) { | 
 | 		unsigned int delay_us = 10; | 
 | 		unsigned int timeout_us = 500 * 1000 / delay_us; | 
 |  | 
 | 		/* | 
 | 		 * The primary CPU0 core shall wait for the secondaries | 
 | 		 * shutdown in order to power-off CPU's cluster safely. | 
 | 		 * The timeout value depends on the current CPU frequency, | 
 | 		 * it takes about 40-150us in average and over 1000us in | 
 | 		 * a worst case scenario. | 
 | 		 */ | 
 | 		do { | 
 | 			if (tegra_cpu_rail_off_ready()) | 
 | 				return 0; | 
 |  | 
 | 			udelay(delay_us); | 
 |  | 
 | 		} while (timeout_us--); | 
 |  | 
 | 		pr_err("secondary CPU taking too long to park\n"); | 
 |  | 
 | 		tegra_cpuidle_report_cpus_state(); | 
 | 	} | 
 |  | 
 | 	pr_err("timed out waiting secondaries to park\n"); | 
 |  | 
 | 	return -ETIMEDOUT; | 
 | } | 
 |  | 
 | static void tegra_cpuidle_unpark_secondary_cpus(void) | 
 | { | 
 | 	unsigned int cpu, lcpu; | 
 |  | 
 | 	for_each_cpu(lcpu, cpu_online_mask) { | 
 | 		cpu = cpu_logical_map(lcpu); | 
 |  | 
 | 		if (cpu > 0) { | 
 | 			tegra_enable_cpu_clock(cpu); | 
 | 			tegra_cpu_out_of_reset(cpu); | 
 | 			flowctrl_write_cpu_halt(cpu, 0); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static int tegra_cpuidle_cc6_enter(unsigned int cpu) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (cpu > 0) { | 
 | 		ret = cpu_suspend(cpu, tegra_pm_park_secondary_cpu); | 
 | 	} else { | 
 | 		ret = tegra_cpuidle_wait_for_secondary_cpus_parking(); | 
 | 		if (!ret) | 
 | 			ret = tegra_pm_enter_lp2(); | 
 |  | 
 | 		tegra_cpuidle_unpark_secondary_cpus(); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int tegra_cpuidle_c7_enter(void) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	err = call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2); | 
 | 	if (err && err != -ENOSYS) | 
 | 		return err; | 
 |  | 
 | 	return cpu_suspend(0, tegra30_pm_secondary_cpu_suspend); | 
 | } | 
 |  | 
 | static int tegra_cpuidle_coupled_barrier(struct cpuidle_device *dev) | 
 | { | 
 | 	if (tegra_pending_sgi()) { | 
 | 		/* | 
 | 		 * CPU got local interrupt that will be lost after GIC's | 
 | 		 * shutdown because GIC driver doesn't save/restore the | 
 | 		 * pending SGI state across CPU cluster PM.  Abort and retry | 
 | 		 * next time. | 
 | 		 */ | 
 | 		atomic_set(&tegra_abort_flag, 1); | 
 | 	} | 
 |  | 
 | 	cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier); | 
 |  | 
 | 	if (atomic_read(&tegra_abort_flag)) { | 
 | 		cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier); | 
 | 		atomic_set(&tegra_abort_flag, 0); | 
 | 		return -EINTR; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static __cpuidle int tegra_cpuidle_state_enter(struct cpuidle_device *dev, | 
 | 					       int index, unsigned int cpu) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	/* | 
 | 	 * CC6 state is the "CPU cluster power-off" state.  In order to | 
 | 	 * enter this state, at first the secondary CPU cores need to be | 
 | 	 * parked into offline mode, then the last CPU should clean out | 
 | 	 * remaining dirty cache lines into DRAM and trigger Flow Controller | 
 | 	 * logic that turns off the cluster's power domain (which includes | 
 | 	 * CPU cores, GIC and L2 cache). | 
 | 	 */ | 
 | 	if (index == TEGRA_CC6) { | 
 | 		err = tegra_cpuidle_coupled_barrier(dev); | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	local_fiq_disable(); | 
 | 	tegra_pm_set_cpu_in_lp2(); | 
 | 	cpu_pm_enter(); | 
 |  | 
 | 	ct_cpuidle_enter(); | 
 |  | 
 | 	switch (index) { | 
 | 	case TEGRA_C7: | 
 | 		err = tegra_cpuidle_c7_enter(); | 
 | 		break; | 
 |  | 
 | 	case TEGRA_CC6: | 
 | 		err = tegra_cpuidle_cc6_enter(cpu); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		err = -EINVAL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	ct_cpuidle_exit(); | 
 |  | 
 | 	cpu_pm_exit(); | 
 | 	tegra_pm_clear_cpu_in_lp2(); | 
 | 	local_fiq_enable(); | 
 |  | 
 | 	return err ?: index; | 
 | } | 
 |  | 
 | static int tegra_cpuidle_adjust_state_index(int index, unsigned int cpu) | 
 | { | 
 | 	/* | 
 | 	 * On Tegra30 CPU0 can't be power-gated separately from secondary | 
 | 	 * cores because it gates the whole CPU cluster. | 
 | 	 */ | 
 | 	if (cpu > 0 || index != TEGRA_C7 || tegra_get_chip_id() != TEGRA30) | 
 | 		return index; | 
 |  | 
 | 	/* put CPU0 into C1 if C7 is requested and secondaries are online */ | 
 | 	if (!IS_ENABLED(CONFIG_PM_SLEEP) || num_online_cpus() > 1) | 
 | 		index = TEGRA_C1; | 
 | 	else | 
 | 		index = TEGRA_CC6; | 
 |  | 
 | 	return index; | 
 | } | 
 |  | 
 | static __cpuidle int tegra_cpuidle_enter(struct cpuidle_device *dev, | 
 | 					 struct cpuidle_driver *drv, | 
 | 					 int index) | 
 | { | 
 | 	bool do_rcu = drv->states[index].flags & CPUIDLE_FLAG_RCU_IDLE; | 
 | 	unsigned int cpu = cpu_logical_map(dev->cpu); | 
 | 	int ret; | 
 |  | 
 | 	index = tegra_cpuidle_adjust_state_index(index, cpu); | 
 | 	if (dev->states_usage[index].disable) | 
 | 		return -1; | 
 |  | 
 | 	if (index == TEGRA_C1) { | 
 | 		if (do_rcu) | 
 | 			ct_cpuidle_enter(); | 
 | 		ret = arm_cpuidle_simple_enter(dev, drv, index); | 
 | 		if (do_rcu) | 
 | 			ct_cpuidle_exit(); | 
 | 	} else | 
 | 		ret = tegra_cpuidle_state_enter(dev, index, cpu); | 
 |  | 
 | 	if (ret < 0) { | 
 | 		if (ret != -EINTR || index != TEGRA_CC6) | 
 | 			pr_err_once("failed to enter state %d err: %d\n", | 
 | 				    index, ret); | 
 | 		index = -1; | 
 | 	} else { | 
 | 		index = ret; | 
 | 	} | 
 |  | 
 | 	return index; | 
 | } | 
 |  | 
 | static int tegra114_enter_s2idle(struct cpuidle_device *dev, | 
 | 				 struct cpuidle_driver *drv, | 
 | 				 int index) | 
 | { | 
 | 	tegra_cpuidle_enter(dev, drv, index); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * The previous versions of Tegra CPUIDLE driver used a different "legacy" | 
 |  * terminology for naming of the idling states, while this driver uses the | 
 |  * new terminology. | 
 |  * | 
 |  * Mapping of the old terms into the new ones: | 
 |  * | 
 |  * Old | New | 
 |  * --------- | 
 |  * LP3 | C1	(CPU core clock gating) | 
 |  * LP2 | C7	(CPU core power gating) | 
 |  * LP2 | CC6	(CPU cluster power gating) | 
 |  * | 
 |  * Note that that the older CPUIDLE driver versions didn't explicitly | 
 |  * differentiate the LP2 states because these states either used the same | 
 |  * code path or because CC6 wasn't supported. | 
 |  */ | 
 | static struct cpuidle_driver tegra_idle_driver = { | 
 | 	.name = "tegra_idle", | 
 | 	.states = { | 
 | 		[TEGRA_C1] = ARM_CPUIDLE_WFI_STATE_PWR(600), | 
 | 		[TEGRA_C7] = { | 
 | 			.enter			= tegra_cpuidle_enter, | 
 | 			.exit_latency		= 2000, | 
 | 			.target_residency	= 2200, | 
 | 			.power_usage		= 100, | 
 | 			.flags			= CPUIDLE_FLAG_TIMER_STOP | | 
 | 						  CPUIDLE_FLAG_RCU_IDLE, | 
 | 			.name			= "C7", | 
 | 			.desc			= "CPU core powered off", | 
 | 		}, | 
 | 		[TEGRA_CC6] = { | 
 | 			.enter			= tegra_cpuidle_enter, | 
 | 			.exit_latency		= 5000, | 
 | 			.target_residency	= 10000, | 
 | 			.power_usage		= 0, | 
 | 			.flags			= CPUIDLE_FLAG_TIMER_STOP | | 
 | 						  CPUIDLE_FLAG_RCU_IDLE   | | 
 | 						  CPUIDLE_FLAG_COUPLED, | 
 | 			.name			= "CC6", | 
 | 			.desc			= "CPU cluster powered off", | 
 | 		}, | 
 | 	}, | 
 | 	.state_count = TEGRA_STATE_COUNT, | 
 | 	.safe_state_index = TEGRA_C1, | 
 | }; | 
 |  | 
 | static inline void tegra_cpuidle_disable_state(enum tegra_state state) | 
 | { | 
 | 	cpuidle_driver_state_disabled(&tegra_idle_driver, state, true); | 
 | } | 
 |  | 
 | /* | 
 |  * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether | 
 |  * they are legacy IRQs or MSI, are lost when CC6 is enabled.  To work around | 
 |  * this, simply disable CC6 if the PCI driver and DT node are both enabled. | 
 |  */ | 
 | void tegra_cpuidle_pcie_irqs_in_use(void) | 
 | { | 
 | 	struct cpuidle_state *state_cc6 = &tegra_idle_driver.states[TEGRA_CC6]; | 
 |  | 
 | 	if ((state_cc6->flags & CPUIDLE_FLAG_UNUSABLE) || | 
 | 	    tegra_get_chip_id() != TEGRA20) | 
 | 		return; | 
 |  | 
 | 	pr_info("disabling CC6 state, since PCIe IRQs are in use\n"); | 
 | 	tegra_cpuidle_disable_state(TEGRA_CC6); | 
 | } | 
 |  | 
 | static void tegra_cpuidle_setup_tegra114_c7_state(void) | 
 | { | 
 | 	struct cpuidle_state *s = &tegra_idle_driver.states[TEGRA_C7]; | 
 |  | 
 | 	s->enter_s2idle = tegra114_enter_s2idle; | 
 | 	s->target_residency = 1000; | 
 | 	s->exit_latency = 500; | 
 | } | 
 |  | 
 | static int tegra_cpuidle_probe(struct platform_device *pdev) | 
 | { | 
 | 	if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NOT_READY) | 
 | 		return -EPROBE_DEFER; | 
 |  | 
 | 	/* LP2 could be disabled in device-tree */ | 
 | 	if (tegra_pmc_get_suspend_mode() < TEGRA_SUSPEND_LP2) | 
 | 		tegra_cpuidle_disable_state(TEGRA_CC6); | 
 |  | 
 | 	/* | 
 | 	 * Required suspend-resume functionality, which is provided by the | 
 | 	 * Tegra-arch core and PMC driver, is unavailable if PM-sleep option | 
 | 	 * is disabled. | 
 | 	 */ | 
 | 	if (!IS_ENABLED(CONFIG_PM_SLEEP)) { | 
 | 		tegra_cpuidle_disable_state(TEGRA_C7); | 
 | 		tegra_cpuidle_disable_state(TEGRA_CC6); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Generic WFI state (also known as C1 or LP3) and the coupled CPU | 
 | 	 * cluster power-off (CC6 or LP2) states are common for all Tegra SoCs. | 
 | 	 */ | 
 | 	switch (tegra_get_chip_id()) { | 
 | 	case TEGRA20: | 
 | 		/* Tegra20 isn't capable to power-off individual CPU cores */ | 
 | 		tegra_cpuidle_disable_state(TEGRA_C7); | 
 | 		break; | 
 |  | 
 | 	case TEGRA30: | 
 | 		break; | 
 |  | 
 | 	case TEGRA114: | 
 | 	case TEGRA124: | 
 | 		tegra_cpuidle_setup_tegra114_c7_state(); | 
 |  | 
 | 		/* coupled CC6 (LP2) state isn't implemented yet */ | 
 | 		tegra_cpuidle_disable_state(TEGRA_CC6); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return cpuidle_register(&tegra_idle_driver, cpu_possible_mask); | 
 | } | 
 |  | 
 | static struct platform_driver tegra_cpuidle_driver = { | 
 | 	.probe = tegra_cpuidle_probe, | 
 | 	.driver = { | 
 | 		.name = "tegra-cpuidle", | 
 | 	}, | 
 | }; | 
 | builtin_platform_driver(tegra_cpuidle_driver); |