|  | /* | 
|  | *  Driver for Conexant CX24113/CX24128 Tuner (Satellite) | 
|  | * | 
|  | *  Copyright (C) 2007-8 Patrick Boettcher <pb@linuxtv.org> | 
|  | * | 
|  | *  Developed for BBTI / Technisat | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License as published by | 
|  | *  the Free Software Foundation; either version 2 of the License, or | 
|  | *  (at your option) any later version. | 
|  | * | 
|  | *  This program is distributed in the hope that it will be useful, | 
|  | *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * | 
|  | *  GNU General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #include <linux/slab.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  |  | 
|  | #include <media/dvb_frontend.h> | 
|  | #include "cx24113.h" | 
|  |  | 
|  | static int debug; | 
|  |  | 
|  | #define cx_info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0) | 
|  | #define cx_err(args...)  do { printk(KERN_ERR  "CX24113: " args); } while (0) | 
|  |  | 
|  | #define dprintk(args...) \ | 
|  | do { \ | 
|  | if (debug) { \ | 
|  | printk(KERN_DEBUG "CX24113: %s: ", __func__); \ | 
|  | printk(args); \ | 
|  | } \ | 
|  | } while (0) | 
|  |  | 
|  | struct cx24113_state { | 
|  | struct i2c_adapter *i2c; | 
|  | const struct cx24113_config *config; | 
|  |  | 
|  | #define REV_CX24113 0x23 | 
|  | u8 rev; | 
|  | u8 ver; | 
|  |  | 
|  | u8 icp_mode:1; | 
|  |  | 
|  | #define ICP_LEVEL1 0 | 
|  | #define ICP_LEVEL2 1 | 
|  | #define ICP_LEVEL3 2 | 
|  | #define ICP_LEVEL4 3 | 
|  | u8 icp_man:2; | 
|  | u8 icp_auto_low:2; | 
|  | u8 icp_auto_mlow:2; | 
|  | u8 icp_auto_mhi:2; | 
|  | u8 icp_auto_hi:2; | 
|  | u8 icp_dig; | 
|  |  | 
|  | #define LNA_MIN_GAIN 0 | 
|  | #define LNA_MID_GAIN 1 | 
|  | #define LNA_MAX_GAIN 2 | 
|  | u8 lna_gain:2; | 
|  |  | 
|  | u8 acp_on:1; | 
|  |  | 
|  | u8 vco_mode:2; | 
|  | u8 vco_shift:1; | 
|  | #define VCOBANDSEL_6 0x80 | 
|  | #define VCOBANDSEL_5 0x01 | 
|  | #define VCOBANDSEL_4 0x02 | 
|  | #define VCOBANDSEL_3 0x04 | 
|  | #define VCOBANDSEL_2 0x08 | 
|  | #define VCOBANDSEL_1 0x10 | 
|  | u8 vco_band; | 
|  |  | 
|  | #define VCODIV4 4 | 
|  | #define VCODIV2 2 | 
|  | u8 vcodiv; | 
|  |  | 
|  | u8 bs_delay:4; | 
|  | u16 bs_freqcnt:13; | 
|  | u16 bs_rdiv; | 
|  | u8 prescaler_mode:1; | 
|  |  | 
|  | u8 rfvga_bias_ctrl; | 
|  |  | 
|  | s16 tuner_gain_thres; | 
|  | u8  gain_level; | 
|  |  | 
|  | u32 frequency; | 
|  |  | 
|  | u8 refdiv; | 
|  |  | 
|  | u8 Fwindow_enabled; | 
|  | }; | 
|  |  | 
|  | static int cx24113_writereg(struct cx24113_state *state, int reg, int data) | 
|  | { | 
|  | u8 buf[] = { reg, data }; | 
|  | struct i2c_msg msg = { .addr = state->config->i2c_addr, | 
|  | .flags = 0, .buf = buf, .len = 2 }; | 
|  | int err = i2c_transfer(state->i2c, &msg, 1); | 
|  | if (err != 1) { | 
|  | printk(KERN_DEBUG "%s: writereg error(err == %i, reg == 0x%02x, data == 0x%02x)\n", | 
|  | __func__, err, reg, data); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24113_readreg(struct cx24113_state *state, u8 reg) | 
|  | { | 
|  | int ret; | 
|  | u8 b; | 
|  | struct i2c_msg msg[] = { | 
|  | { .addr = state->config->i2c_addr, | 
|  | .flags = 0, .buf = ®, .len = 1 }, | 
|  | { .addr = state->config->i2c_addr, | 
|  | .flags = I2C_M_RD, .buf = &b, .len = 1 } | 
|  | }; | 
|  |  | 
|  | ret = i2c_transfer(state->i2c, msg, 2); | 
|  |  | 
|  | if (ret != 2) { | 
|  | printk(KERN_DEBUG "%s: reg=0x%x (error=%d)\n", | 
|  | __func__, reg, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return b; | 
|  | } | 
|  |  | 
|  | static void cx24113_set_parameters(struct cx24113_state *state) | 
|  | { | 
|  | u8 r; | 
|  |  | 
|  | r = cx24113_readreg(state, 0x10) & 0x82; | 
|  | r |= state->icp_mode; | 
|  | r |= state->icp_man << 4; | 
|  | r |= state->icp_dig << 2; | 
|  | r |= state->prescaler_mode << 5; | 
|  | cx24113_writereg(state, 0x10, r); | 
|  |  | 
|  | r = (state->icp_auto_low  << 0) | (state->icp_auto_mlow << 2) | 
|  | | (state->icp_auto_mhi << 4) | (state->icp_auto_hi << 6); | 
|  | cx24113_writereg(state, 0x11, r); | 
|  |  | 
|  | if (state->rev == REV_CX24113) { | 
|  | r = cx24113_readreg(state, 0x20) & 0xec; | 
|  | r |= state->lna_gain; | 
|  | r |= state->rfvga_bias_ctrl << 4; | 
|  | cx24113_writereg(state, 0x20, r); | 
|  | } | 
|  |  | 
|  | r = cx24113_readreg(state, 0x12) & 0x03; | 
|  | r |= state->acp_on << 2; | 
|  | r |= state->bs_delay << 4; | 
|  | cx24113_writereg(state, 0x12, r); | 
|  |  | 
|  | r = cx24113_readreg(state, 0x18) & 0x40; | 
|  | r |= state->vco_shift; | 
|  | if (state->vco_band == VCOBANDSEL_6) | 
|  | r |= (1 << 7); | 
|  | else | 
|  | r |= (state->vco_band << 1); | 
|  | cx24113_writereg(state, 0x18, r); | 
|  |  | 
|  | r  = cx24113_readreg(state, 0x14) & 0x20; | 
|  | r |= (state->vco_mode << 6) | ((state->bs_freqcnt >> 8) & 0x1f); | 
|  | cx24113_writereg(state, 0x14, r); | 
|  | cx24113_writereg(state, 0x15, (state->bs_freqcnt        & 0xff)); | 
|  |  | 
|  | cx24113_writereg(state, 0x16, (state->bs_rdiv >> 4) & 0xff); | 
|  | r = (cx24113_readreg(state, 0x17) & 0x0f) | | 
|  | ((state->bs_rdiv & 0x0f) << 4); | 
|  | cx24113_writereg(state, 0x17, r); | 
|  | } | 
|  |  | 
|  | #define VGA_0 0x00 | 
|  | #define VGA_1 0x04 | 
|  | #define VGA_2 0x02 | 
|  | #define VGA_3 0x06 | 
|  | #define VGA_4 0x01 | 
|  | #define VGA_5 0x05 | 
|  | #define VGA_6 0x03 | 
|  | #define VGA_7 0x07 | 
|  |  | 
|  | #define RFVGA_0 0x00 | 
|  | #define RFVGA_1 0x01 | 
|  | #define RFVGA_2 0x02 | 
|  | #define RFVGA_3 0x03 | 
|  |  | 
|  | static int cx24113_set_gain_settings(struct cx24113_state *state, | 
|  | s16 power_estimation) | 
|  | { | 
|  | u8 ampout = cx24113_readreg(state, 0x1d) & 0xf0, | 
|  | vga    = cx24113_readreg(state, 0x1f) & 0x3f, | 
|  | rfvga  = cx24113_readreg(state, 0x20) & 0xf3; | 
|  | u8 gain_level = power_estimation >= state->tuner_gain_thres; | 
|  |  | 
|  | dprintk("power estimation: %d, thres: %d, gain_level: %d/%d\n", | 
|  | power_estimation, state->tuner_gain_thres, | 
|  | state->gain_level, gain_level); | 
|  |  | 
|  | if (gain_level == state->gain_level) | 
|  | return 0; /* nothing to be done */ | 
|  |  | 
|  | ampout |= 0xf; | 
|  |  | 
|  | if (gain_level) { | 
|  | rfvga |= RFVGA_0 << 2; | 
|  | vga   |= (VGA_7 << 3) | VGA_7; | 
|  | } else { | 
|  | rfvga |= RFVGA_2 << 2; | 
|  | vga  |= (VGA_6 << 3) | VGA_2; | 
|  | } | 
|  | state->gain_level = gain_level; | 
|  |  | 
|  | cx24113_writereg(state, 0x1d, ampout); | 
|  | cx24113_writereg(state, 0x1f, vga); | 
|  | cx24113_writereg(state, 0x20, rfvga); | 
|  |  | 
|  | return 1; /* did something */ | 
|  | } | 
|  |  | 
|  | static int cx24113_set_Fref(struct cx24113_state *state, u8 high) | 
|  | { | 
|  | u8 xtal = cx24113_readreg(state, 0x02); | 
|  | if (state->rev == 0x43 && state->vcodiv == VCODIV4) | 
|  | high = 1; | 
|  |  | 
|  | xtal &= ~0x2; | 
|  | if (high) | 
|  | xtal |= high << 1; | 
|  | return cx24113_writereg(state, 0x02, xtal); | 
|  | } | 
|  |  | 
|  | static int cx24113_enable(struct cx24113_state *state, u8 enable) | 
|  | { | 
|  | u8 r21 = (cx24113_readreg(state, 0x21) & 0xc0) | enable; | 
|  | if (state->rev == REV_CX24113) | 
|  | r21 |= (1 << 1); | 
|  | return cx24113_writereg(state, 0x21, r21); | 
|  | } | 
|  |  | 
|  | static int cx24113_set_bandwidth(struct cx24113_state *state, u32 bandwidth_khz) | 
|  | { | 
|  | u8 r; | 
|  |  | 
|  | if (bandwidth_khz <= 19000) | 
|  | r = 0x03 << 6; | 
|  | else if (bandwidth_khz <= 25000) | 
|  | r = 0x02 << 6; | 
|  | else | 
|  | r = 0x01 << 6; | 
|  |  | 
|  | dprintk("bandwidth to be set: %d\n", bandwidth_khz); | 
|  | bandwidth_khz *= 10; | 
|  | bandwidth_khz -= 10000; | 
|  | bandwidth_khz /= 1000; | 
|  | bandwidth_khz += 5; | 
|  | bandwidth_khz /= 10; | 
|  |  | 
|  | dprintk("bandwidth: %d %d\n", r >> 6, bandwidth_khz); | 
|  |  | 
|  | r |= bandwidth_khz & 0x3f; | 
|  |  | 
|  | return cx24113_writereg(state, 0x1e, r); | 
|  | } | 
|  |  | 
|  | static int cx24113_set_clk_inversion(struct cx24113_state *state, u8 on) | 
|  | { | 
|  | u8 r = (cx24113_readreg(state, 0x10) & 0x7f) | ((on & 0x1) << 7); | 
|  | return cx24113_writereg(state, 0x10, r); | 
|  | } | 
|  |  | 
|  | static int cx24113_get_status(struct dvb_frontend *fe, u32 *status) | 
|  | { | 
|  | struct cx24113_state *state = fe->tuner_priv; | 
|  | u8 r = (cx24113_readreg(state, 0x10) & 0x02) >> 1; | 
|  | if (r) | 
|  | *status |= TUNER_STATUS_LOCKED; | 
|  | dprintk("PLL locked: %d\n", r); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u8 cx24113_set_ref_div(struct cx24113_state *state, u8 refdiv) | 
|  | { | 
|  | if (state->rev == 0x43 && state->vcodiv == VCODIV4) | 
|  | refdiv = 2; | 
|  | return state->refdiv = refdiv; | 
|  | } | 
|  |  | 
|  | static void cx24113_calc_pll_nf(struct cx24113_state *state, u16 *n, s32 *f) | 
|  | { | 
|  | s32 N; | 
|  | s64 F; | 
|  | u64 dividend; | 
|  | u8 R, r; | 
|  | u8 vcodiv; | 
|  | u8 factor; | 
|  | s32 freq_hz = state->frequency * 1000; | 
|  |  | 
|  | if (state->config->xtal_khz < 20000) | 
|  | factor = 1; | 
|  | else | 
|  | factor = 2; | 
|  |  | 
|  | if (state->rev == REV_CX24113) { | 
|  | if (state->frequency >= 1100000) | 
|  | vcodiv = VCODIV2; | 
|  | else | 
|  | vcodiv = VCODIV4; | 
|  | } else { | 
|  | if (state->frequency >= 1165000) | 
|  | vcodiv = VCODIV2; | 
|  | else | 
|  | vcodiv = VCODIV4; | 
|  | } | 
|  | state->vcodiv = vcodiv; | 
|  |  | 
|  | dprintk("calculating N/F for %dHz with vcodiv %d\n", freq_hz, vcodiv); | 
|  | R = 0; | 
|  | do { | 
|  | R = cx24113_set_ref_div(state, R + 1); | 
|  |  | 
|  | /* calculate tuner PLL settings: */ | 
|  | N =  (freq_hz / 100 * vcodiv) * R; | 
|  | N /= (state->config->xtal_khz) * factor * 2; | 
|  | N += 5;     /* For round up. */ | 
|  | N /= 10; | 
|  | N -= 32; | 
|  | } while (N < 6 && R < 3); | 
|  |  | 
|  | if (N < 6) { | 
|  | cx_err("strange frequency: N < 6\n"); | 
|  | return; | 
|  | } | 
|  | F = freq_hz; | 
|  | F *= (u64) (R * vcodiv * 262144); | 
|  | dprintk("1 N: %d, F: %lld, R: %d\n", N, (long long)F, R); | 
|  | /* do_div needs an u64 as first argument */ | 
|  | dividend = F; | 
|  | do_div(dividend, state->config->xtal_khz * 1000 * factor * 2); | 
|  | F = dividend; | 
|  | dprintk("2 N: %d, F: %lld, R: %d\n", N, (long long)F, R); | 
|  | F -= (N + 32) * 262144; | 
|  |  | 
|  | dprintk("3 N: %d, F: %lld, R: %d\n", N, (long long)F, R); | 
|  |  | 
|  | if (state->Fwindow_enabled) { | 
|  | if (F > (262144 / 2 - 1638)) | 
|  | F = 262144 / 2 - 1638; | 
|  | if (F < (-262144 / 2 + 1638)) | 
|  | F = -262144 / 2 + 1638; | 
|  | if ((F < 3277 && F > 0) || (F > -3277 && F < 0)) { | 
|  | F = 0; | 
|  | r = cx24113_readreg(state, 0x10); | 
|  | cx24113_writereg(state, 0x10, r | (1 << 6)); | 
|  | } | 
|  | } | 
|  | dprintk("4 N: %d, F: %lld, R: %d\n", N, (long long)F, R); | 
|  |  | 
|  | *n = (u16) N; | 
|  | *f = (s32) F; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void cx24113_set_nfr(struct cx24113_state *state, u16 n, s32 f, u8 r) | 
|  | { | 
|  | u8 reg; | 
|  | cx24113_writereg(state, 0x19, (n >> 1) & 0xff); | 
|  |  | 
|  | reg = ((n & 0x1) << 7) | ((f >> 11) & 0x7f); | 
|  | cx24113_writereg(state, 0x1a, reg); | 
|  |  | 
|  | cx24113_writereg(state, 0x1b, (f >> 3) & 0xff); | 
|  |  | 
|  | reg = cx24113_readreg(state, 0x1c) & 0x1f; | 
|  | cx24113_writereg(state, 0x1c, reg | ((f & 0x7) << 5)); | 
|  |  | 
|  | cx24113_set_Fref(state, r - 1); | 
|  | } | 
|  |  | 
|  | static int cx24113_set_frequency(struct cx24113_state *state, u32 frequency) | 
|  | { | 
|  | u8 r = 1; /* or 2 */ | 
|  | u16 n = 6; | 
|  | s32 f = 0; | 
|  |  | 
|  | r = cx24113_readreg(state, 0x14); | 
|  | cx24113_writereg(state, 0x14, r & 0x3f); | 
|  |  | 
|  | r = cx24113_readreg(state, 0x10); | 
|  | cx24113_writereg(state, 0x10, r & 0xbf); | 
|  |  | 
|  | state->frequency = frequency; | 
|  |  | 
|  | dprintk("tuning to frequency: %d\n", frequency); | 
|  |  | 
|  | cx24113_calc_pll_nf(state, &n, &f); | 
|  | cx24113_set_nfr(state, n, f, state->refdiv); | 
|  |  | 
|  | r = cx24113_readreg(state, 0x18) & 0xbf; | 
|  | if (state->vcodiv != VCODIV2) | 
|  | r |= 1 << 6; | 
|  | cx24113_writereg(state, 0x18, r); | 
|  |  | 
|  | /* The need for this sleep is not clear. But helps in some cases */ | 
|  | msleep(5); | 
|  |  | 
|  | r = cx24113_readreg(state, 0x1c) & 0xef; | 
|  | cx24113_writereg(state, 0x1c, r | (1 << 4)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24113_init(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24113_state *state = fe->tuner_priv; | 
|  | int ret; | 
|  |  | 
|  | state->tuner_gain_thres = -50; | 
|  | state->gain_level = 255; /* to force a gain-setting initialization */ | 
|  | state->icp_mode = 0; | 
|  |  | 
|  | if (state->config->xtal_khz < 11000) { | 
|  | state->icp_auto_hi  = ICP_LEVEL4; | 
|  | state->icp_auto_mhi  = ICP_LEVEL4; | 
|  | state->icp_auto_mlow = ICP_LEVEL3; | 
|  | state->icp_auto_low = ICP_LEVEL3; | 
|  | } else { | 
|  | state->icp_auto_hi  = ICP_LEVEL4; | 
|  | state->icp_auto_mhi  = ICP_LEVEL4; | 
|  | state->icp_auto_mlow = ICP_LEVEL3; | 
|  | state->icp_auto_low = ICP_LEVEL2; | 
|  | } | 
|  |  | 
|  | state->icp_dig = ICP_LEVEL3; | 
|  | state->icp_man = ICP_LEVEL1; | 
|  | state->acp_on  = 1; | 
|  | state->vco_mode = 0; | 
|  | state->vco_shift = 0; | 
|  | state->vco_band = VCOBANDSEL_1; | 
|  | state->bs_delay = 8; | 
|  | state->bs_freqcnt = 0x0fff; | 
|  | state->bs_rdiv = 0x0fff; | 
|  | state->prescaler_mode = 0; | 
|  | state->lna_gain = LNA_MAX_GAIN; | 
|  | state->rfvga_bias_ctrl = 1; | 
|  | state->Fwindow_enabled = 1; | 
|  |  | 
|  | cx24113_set_Fref(state, 0); | 
|  | cx24113_enable(state, 0x3d); | 
|  | cx24113_set_parameters(state); | 
|  |  | 
|  | cx24113_set_gain_settings(state, -30); | 
|  |  | 
|  | cx24113_set_bandwidth(state, 18025); | 
|  | cx24113_set_clk_inversion(state, 1); | 
|  |  | 
|  | if (state->config->xtal_khz >= 40000) | 
|  | ret = cx24113_writereg(state, 0x02, | 
|  | (cx24113_readreg(state, 0x02) & 0xfb) | (1 << 2)); | 
|  | else | 
|  | ret = cx24113_writereg(state, 0x02, | 
|  | (cx24113_readreg(state, 0x02) & 0xfb) | (0 << 2)); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int cx24113_set_params(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  | struct cx24113_state *state = fe->tuner_priv; | 
|  | /* for a ROLL-OFF factor of 0.35, 0.2: 600, 0.25: 625 */ | 
|  | u32 roll_off = 675; | 
|  | u32 bw; | 
|  |  | 
|  | bw  = ((c->symbol_rate/100) * roll_off) / 1000; | 
|  | bw += (10000000/100) + 5; | 
|  | bw /= 10; | 
|  | bw += 1000; | 
|  | cx24113_set_bandwidth(state, bw); | 
|  |  | 
|  | cx24113_set_frequency(state, c->frequency); | 
|  | msleep(5); | 
|  | return cx24113_get_status(fe, &bw); | 
|  | } | 
|  |  | 
|  | static s8 cx24113_agc_table[2][10] = { | 
|  | {-54, -41, -35, -30, -25, -21, -16, -10,  -6,  -2}, | 
|  | {-39, -35, -30, -25, -19, -15, -11,  -5,   1,   9}, | 
|  | }; | 
|  |  | 
|  | void cx24113_agc_callback(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24113_state *state = fe->tuner_priv; | 
|  | s16 s, i; | 
|  | if (!fe->ops.read_signal_strength) | 
|  | return; | 
|  |  | 
|  | do { | 
|  | /* this only works with the current CX24123 implementation */ | 
|  | fe->ops.read_signal_strength(fe, (u16 *) &s); | 
|  | s >>= 8; | 
|  | dprintk("signal strength: %d\n", s); | 
|  | for (i = 0; i < sizeof(cx24113_agc_table[0]); i++) | 
|  | if (cx24113_agc_table[state->gain_level][i] > s) | 
|  | break; | 
|  | s = -25 - i*5; | 
|  | } while (cx24113_set_gain_settings(state, s)); | 
|  | } | 
|  | EXPORT_SYMBOL(cx24113_agc_callback); | 
|  |  | 
|  | static int cx24113_get_frequency(struct dvb_frontend *fe, u32 *frequency) | 
|  | { | 
|  | struct cx24113_state *state = fe->tuner_priv; | 
|  | *frequency = state->frequency; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void cx24113_release(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24113_state *state = fe->tuner_priv; | 
|  | dprintk("\n"); | 
|  | fe->tuner_priv = NULL; | 
|  | kfree(state); | 
|  | } | 
|  |  | 
|  | static const struct dvb_tuner_ops cx24113_tuner_ops = { | 
|  | .info = { | 
|  | .name           = "Conexant CX24113", | 
|  | .frequency_min  = 950000, | 
|  | .frequency_max  = 2150000, | 
|  | .frequency_step = 125, | 
|  | }, | 
|  |  | 
|  | .release       = cx24113_release, | 
|  |  | 
|  | .init          = cx24113_init, | 
|  |  | 
|  | .set_params    = cx24113_set_params, | 
|  | .get_frequency = cx24113_get_frequency, | 
|  | .get_status    = cx24113_get_status, | 
|  | }; | 
|  |  | 
|  | struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe, | 
|  | const struct cx24113_config *config, struct i2c_adapter *i2c) | 
|  | { | 
|  | /* allocate memory for the internal state */ | 
|  | struct cx24113_state *state = kzalloc(sizeof(*state), GFP_KERNEL); | 
|  | int rc; | 
|  |  | 
|  | if (!state) | 
|  | return NULL; | 
|  |  | 
|  | /* setup the state */ | 
|  | state->config = config; | 
|  | state->i2c = i2c; | 
|  |  | 
|  | cx_info("trying to detect myself\n"); | 
|  |  | 
|  | /* making a dummy read, because of some expected troubles | 
|  | * after power on */ | 
|  | cx24113_readreg(state, 0x00); | 
|  |  | 
|  | rc = cx24113_readreg(state, 0x00); | 
|  | if (rc < 0) { | 
|  | cx_info("CX24113 not found.\n"); | 
|  | goto error; | 
|  | } | 
|  | state->rev = rc; | 
|  |  | 
|  | switch (rc) { | 
|  | case 0x43: | 
|  | cx_info("detected CX24113 variant\n"); | 
|  | break; | 
|  | case REV_CX24113: | 
|  | cx_info("successfully detected\n"); | 
|  | break; | 
|  | default: | 
|  | cx_err("unsupported device id: %x\n", state->rev); | 
|  | goto error; | 
|  | } | 
|  | state->ver = cx24113_readreg(state, 0x01); | 
|  | cx_info("version: %x\n", state->ver); | 
|  |  | 
|  | /* create dvb_frontend */ | 
|  | memcpy(&fe->ops.tuner_ops, &cx24113_tuner_ops, | 
|  | sizeof(struct dvb_tuner_ops)); | 
|  | fe->tuner_priv = state; | 
|  | return fe; | 
|  |  | 
|  | error: | 
|  | kfree(state); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL(cx24113_attach); | 
|  |  | 
|  | module_param(debug, int, 0644); | 
|  | MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); | 
|  |  | 
|  | MODULE_AUTHOR("Patrick Boettcher <pb@linuxtv.org>"); | 
|  | MODULE_DESCRIPTION("DVB Frontend module for Conexant CX24113/CX24128hardware"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  |