|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * FPGA Manager Driver for FPGA Management Engine (FME) | 
|  | * | 
|  | * Copyright (C) 2017-2018 Intel Corporation, Inc. | 
|  | * | 
|  | * Authors: | 
|  | *   Kang Luwei <luwei.kang@intel.com> | 
|  | *   Xiao Guangrong <guangrong.xiao@linux.intel.com> | 
|  | *   Wu Hao <hao.wu@intel.com> | 
|  | *   Joseph Grecco <joe.grecco@intel.com> | 
|  | *   Enno Luebbers <enno.luebbers@intel.com> | 
|  | *   Tim Whisonant <tim.whisonant@intel.com> | 
|  | *   Ananda Ravuri <ananda.ravuri@intel.com> | 
|  | *   Christopher Rauer <christopher.rauer@intel.com> | 
|  | *   Henry Mitchel <henry.mitchel@intel.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/bitfield.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/iopoll.h> | 
|  | #include <linux/io-64-nonatomic-lo-hi.h> | 
|  | #include <linux/fpga/fpga-mgr.h> | 
|  |  | 
|  | #include "dfl-fme-pr.h" | 
|  |  | 
|  | /* FME Partial Reconfiguration Sub Feature Register Set */ | 
|  | #define FME_PR_DFH		0x0 | 
|  | #define FME_PR_CTRL		0x8 | 
|  | #define FME_PR_STS		0x10 | 
|  | #define FME_PR_DATA		0x18 | 
|  | #define FME_PR_ERR		0x20 | 
|  | #define FME_PR_INTFC_ID_L	0xA8 | 
|  | #define FME_PR_INTFC_ID_H	0xB0 | 
|  |  | 
|  | /* FME PR Control Register Bitfield */ | 
|  | #define FME_PR_CTRL_PR_RST	BIT_ULL(0)  /* Reset PR engine */ | 
|  | #define FME_PR_CTRL_PR_RSTACK	BIT_ULL(4)  /* Ack for PR engine reset */ | 
|  | #define FME_PR_CTRL_PR_RGN_ID	GENMASK_ULL(9, 7)       /* PR Region ID */ | 
|  | #define FME_PR_CTRL_PR_START	BIT_ULL(12) /* Start to request PR service */ | 
|  | #define FME_PR_CTRL_PR_COMPLETE	BIT_ULL(13) /* PR data push completion */ | 
|  |  | 
|  | /* FME PR Status Register Bitfield */ | 
|  | /* Number of available entries in HW queue inside the PR engine. */ | 
|  | #define FME_PR_STS_PR_CREDIT	GENMASK_ULL(8, 0) | 
|  | #define FME_PR_STS_PR_STS	BIT_ULL(16) /* PR operation status */ | 
|  | #define FME_PR_STS_PR_STS_IDLE	0 | 
|  | #define FME_PR_STS_PR_CTRLR_STS	GENMASK_ULL(22, 20)     /* Controller status */ | 
|  | #define FME_PR_STS_PR_HOST_STS	GENMASK_ULL(27, 24)     /* PR host status */ | 
|  |  | 
|  | /* FME PR Data Register Bitfield */ | 
|  | /* PR data from the raw-binary file. */ | 
|  | #define FME_PR_DATA_PR_DATA_RAW	GENMASK_ULL(32, 0) | 
|  |  | 
|  | /* FME PR Error Register */ | 
|  | /* PR Operation errors detected. */ | 
|  | #define FME_PR_ERR_OPERATION_ERR	BIT_ULL(0) | 
|  | /* CRC error detected. */ | 
|  | #define FME_PR_ERR_CRC_ERR		BIT_ULL(1) | 
|  | /* Incompatible PR bitstream detected. */ | 
|  | #define FME_PR_ERR_INCOMPATIBLE_BS	BIT_ULL(2) | 
|  | /* PR data push protocol violated. */ | 
|  | #define FME_PR_ERR_PROTOCOL_ERR		BIT_ULL(3) | 
|  | /* PR data fifo overflow error detected */ | 
|  | #define FME_PR_ERR_FIFO_OVERFLOW	BIT_ULL(4) | 
|  |  | 
|  | #define PR_WAIT_TIMEOUT   8000000 | 
|  | #define PR_HOST_STATUS_IDLE	0 | 
|  |  | 
|  | struct fme_mgr_priv { | 
|  | void __iomem *ioaddr; | 
|  | u64 pr_error; | 
|  | }; | 
|  |  | 
|  | static u64 pr_error_to_mgr_status(u64 err) | 
|  | { | 
|  | u64 status = 0; | 
|  |  | 
|  | if (err & FME_PR_ERR_OPERATION_ERR) | 
|  | status |= FPGA_MGR_STATUS_OPERATION_ERR; | 
|  | if (err & FME_PR_ERR_CRC_ERR) | 
|  | status |= FPGA_MGR_STATUS_CRC_ERR; | 
|  | if (err & FME_PR_ERR_INCOMPATIBLE_BS) | 
|  | status |= FPGA_MGR_STATUS_INCOMPATIBLE_IMAGE_ERR; | 
|  | if (err & FME_PR_ERR_PROTOCOL_ERR) | 
|  | status |= FPGA_MGR_STATUS_IP_PROTOCOL_ERR; | 
|  | if (err & FME_PR_ERR_FIFO_OVERFLOW) | 
|  | status |= FPGA_MGR_STATUS_FIFO_OVERFLOW_ERR; | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static u64 fme_mgr_pr_error_handle(void __iomem *fme_pr) | 
|  | { | 
|  | u64 pr_status, pr_error; | 
|  |  | 
|  | pr_status = readq(fme_pr + FME_PR_STS); | 
|  | if (!(pr_status & FME_PR_STS_PR_STS)) | 
|  | return 0; | 
|  |  | 
|  | pr_error = readq(fme_pr + FME_PR_ERR); | 
|  | writeq(pr_error, fme_pr + FME_PR_ERR); | 
|  |  | 
|  | return pr_error; | 
|  | } | 
|  |  | 
|  | static int fme_mgr_write_init(struct fpga_manager *mgr, | 
|  | struct fpga_image_info *info, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct device *dev = &mgr->dev; | 
|  | struct fme_mgr_priv *priv = mgr->priv; | 
|  | void __iomem *fme_pr = priv->ioaddr; | 
|  | u64 pr_ctrl, pr_status; | 
|  |  | 
|  | if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) { | 
|  | dev_err(dev, "only supports partial reconfiguration.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "resetting PR before initiated PR\n"); | 
|  |  | 
|  | pr_ctrl = readq(fme_pr + FME_PR_CTRL); | 
|  | pr_ctrl |= FME_PR_CTRL_PR_RST; | 
|  | writeq(pr_ctrl, fme_pr + FME_PR_CTRL); | 
|  |  | 
|  | if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl, | 
|  | pr_ctrl & FME_PR_CTRL_PR_RSTACK, 1, | 
|  | PR_WAIT_TIMEOUT)) { | 
|  | dev_err(dev, "PR Reset ACK timeout\n"); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | pr_ctrl = readq(fme_pr + FME_PR_CTRL); | 
|  | pr_ctrl &= ~FME_PR_CTRL_PR_RST; | 
|  | writeq(pr_ctrl, fme_pr + FME_PR_CTRL); | 
|  |  | 
|  | dev_dbg(dev, | 
|  | "waiting for PR resource in HW to be initialized and ready\n"); | 
|  |  | 
|  | if (readq_poll_timeout(fme_pr + FME_PR_STS, pr_status, | 
|  | (pr_status & FME_PR_STS_PR_STS) == | 
|  | FME_PR_STS_PR_STS_IDLE, 1, PR_WAIT_TIMEOUT)) { | 
|  | dev_err(dev, "PR Status timeout\n"); | 
|  | priv->pr_error = fme_mgr_pr_error_handle(fme_pr); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "check and clear previous PR error\n"); | 
|  | priv->pr_error = fme_mgr_pr_error_handle(fme_pr); | 
|  | if (priv->pr_error) | 
|  | dev_dbg(dev, "previous PR error detected %llx\n", | 
|  | (unsigned long long)priv->pr_error); | 
|  |  | 
|  | dev_dbg(dev, "set PR port ID\n"); | 
|  |  | 
|  | pr_ctrl = readq(fme_pr + FME_PR_CTRL); | 
|  | pr_ctrl &= ~FME_PR_CTRL_PR_RGN_ID; | 
|  | pr_ctrl |= FIELD_PREP(FME_PR_CTRL_PR_RGN_ID, info->region_id); | 
|  | writeq(pr_ctrl, fme_pr + FME_PR_CTRL); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int fme_mgr_write(struct fpga_manager *mgr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct device *dev = &mgr->dev; | 
|  | struct fme_mgr_priv *priv = mgr->priv; | 
|  | void __iomem *fme_pr = priv->ioaddr; | 
|  | u64 pr_ctrl, pr_status, pr_data; | 
|  | int delay = 0, pr_credit, i = 0; | 
|  |  | 
|  | dev_dbg(dev, "start request\n"); | 
|  |  | 
|  | pr_ctrl = readq(fme_pr + FME_PR_CTRL); | 
|  | pr_ctrl |= FME_PR_CTRL_PR_START; | 
|  | writeq(pr_ctrl, fme_pr + FME_PR_CTRL); | 
|  |  | 
|  | dev_dbg(dev, "pushing data from bitstream to HW\n"); | 
|  |  | 
|  | /* | 
|  | * driver can push data to PR hardware using PR_DATA register once HW | 
|  | * has enough pr_credit (> 1), pr_credit reduces one for every 32bit | 
|  | * pr data write to PR_DATA register. If pr_credit <= 1, driver needs | 
|  | * to wait for enough pr_credit from hardware by polling. | 
|  | */ | 
|  | pr_status = readq(fme_pr + FME_PR_STS); | 
|  | pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status); | 
|  |  | 
|  | while (count > 0) { | 
|  | while (pr_credit <= 1) { | 
|  | if (delay++ > PR_WAIT_TIMEOUT) { | 
|  | dev_err(dev, "PR_CREDIT timeout\n"); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  | udelay(1); | 
|  |  | 
|  | pr_status = readq(fme_pr + FME_PR_STS); | 
|  | pr_credit = FIELD_GET(FME_PR_STS_PR_CREDIT, pr_status); | 
|  | } | 
|  |  | 
|  | if (count < 4) { | 
|  | dev_err(dev, "Invalid PR bitstream size\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | pr_data = 0; | 
|  | pr_data |= FIELD_PREP(FME_PR_DATA_PR_DATA_RAW, | 
|  | *(((u32 *)buf) + i)); | 
|  | writeq(pr_data, fme_pr + FME_PR_DATA); | 
|  | count -= 4; | 
|  | pr_credit--; | 
|  | i++; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int fme_mgr_write_complete(struct fpga_manager *mgr, | 
|  | struct fpga_image_info *info) | 
|  | { | 
|  | struct device *dev = &mgr->dev; | 
|  | struct fme_mgr_priv *priv = mgr->priv; | 
|  | void __iomem *fme_pr = priv->ioaddr; | 
|  | u64 pr_ctrl; | 
|  |  | 
|  | pr_ctrl = readq(fme_pr + FME_PR_CTRL); | 
|  | pr_ctrl |= FME_PR_CTRL_PR_COMPLETE; | 
|  | writeq(pr_ctrl, fme_pr + FME_PR_CTRL); | 
|  |  | 
|  | dev_dbg(dev, "green bitstream push complete\n"); | 
|  | dev_dbg(dev, "waiting for HW to release PR resource\n"); | 
|  |  | 
|  | if (readq_poll_timeout(fme_pr + FME_PR_CTRL, pr_ctrl, | 
|  | !(pr_ctrl & FME_PR_CTRL_PR_START), 1, | 
|  | PR_WAIT_TIMEOUT)) { | 
|  | dev_err(dev, "PR Completion ACK timeout.\n"); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "PR operation complete, checking status\n"); | 
|  | priv->pr_error = fme_mgr_pr_error_handle(fme_pr); | 
|  | if (priv->pr_error) { | 
|  | dev_dbg(dev, "PR error detected %llx\n", | 
|  | (unsigned long long)priv->pr_error); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "PR done successfully\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u64 fme_mgr_status(struct fpga_manager *mgr) | 
|  | { | 
|  | struct fme_mgr_priv *priv = mgr->priv; | 
|  |  | 
|  | return pr_error_to_mgr_status(priv->pr_error); | 
|  | } | 
|  |  | 
|  | static const struct fpga_manager_ops fme_mgr_ops = { | 
|  | .write_init = fme_mgr_write_init, | 
|  | .write = fme_mgr_write, | 
|  | .write_complete = fme_mgr_write_complete, | 
|  | .status = fme_mgr_status, | 
|  | }; | 
|  |  | 
|  | static void fme_mgr_get_compat_id(void __iomem *fme_pr, | 
|  | struct fpga_compat_id *id) | 
|  | { | 
|  | id->id_l = readq(fme_pr + FME_PR_INTFC_ID_L); | 
|  | id->id_h = readq(fme_pr + FME_PR_INTFC_ID_H); | 
|  | } | 
|  |  | 
|  | static int fme_mgr_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct dfl_fme_mgr_pdata *pdata = dev_get_platdata(&pdev->dev); | 
|  | struct fpga_manager_info info = { 0 }; | 
|  | struct device *dev = &pdev->dev; | 
|  | struct fme_mgr_priv *priv; | 
|  | struct fpga_manager *mgr; | 
|  |  | 
|  | priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | 
|  | if (!priv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (pdata->ioaddr) | 
|  | priv->ioaddr = pdata->ioaddr; | 
|  |  | 
|  | if (!priv->ioaddr) { | 
|  | priv->ioaddr = devm_platform_ioremap_resource(pdev, 0); | 
|  | if (IS_ERR(priv->ioaddr)) | 
|  | return PTR_ERR(priv->ioaddr); | 
|  | } | 
|  |  | 
|  | info.name = "DFL FME FPGA Manager"; | 
|  | info.mops = &fme_mgr_ops; | 
|  | info.priv = priv; | 
|  | info.compat_id = devm_kzalloc(dev, sizeof(*info.compat_id), GFP_KERNEL); | 
|  | if (!info.compat_id) | 
|  | return -ENOMEM; | 
|  |  | 
|  | fme_mgr_get_compat_id(priv->ioaddr, info.compat_id); | 
|  | mgr = devm_fpga_mgr_register_full(dev, &info); | 
|  | return PTR_ERR_OR_ZERO(mgr); | 
|  | } | 
|  |  | 
|  | static struct platform_driver fme_mgr_driver = { | 
|  | .driver	= { | 
|  | .name    = DFL_FPGA_FME_MGR, | 
|  | }, | 
|  | .probe   = fme_mgr_probe, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(fme_mgr_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("FPGA Manager for DFL FPGA Management Engine"); | 
|  | MODULE_AUTHOR("Intel Corporation"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_ALIAS("platform:dfl-fme-mgr"); |