|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Sophgo SG2042 PWM Controller Driver | 
|  | * | 
|  | * Copyright (C) 2024 Sophgo Technology Inc. | 
|  | * Copyright (C) 2024 Chen Wang <unicorn_wang@outlook.com> | 
|  | * | 
|  | * Limitations: | 
|  | * - After reset, the output of the PWM channel is always high. | 
|  | *   The value of HLPERIOD/PERIOD is 0. | 
|  | * - When HLPERIOD or PERIOD is reconfigured, PWM will start to | 
|  | *   output waveforms with the new configuration after completing | 
|  | *   the running period. | 
|  | * - When PERIOD and HLPERIOD is set to 0, the PWM wave output will | 
|  | *   be stopped and the output is pulled to high. | 
|  | * - SG2044 supports both polarities, SG2042 only normal polarity. | 
|  | * See the datasheet [1] for more details. | 
|  | * [1]:https://github.com/sophgo/sophgo-doc/tree/main/SG2042/TRM | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/math64.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pwm.h> | 
|  | #include <linux/reset.h> | 
|  |  | 
|  | /* | 
|  | * Offset RegisterName | 
|  | * 0x0000 HLPERIOD0 | 
|  | * 0x0004 PERIOD0 | 
|  | * 0x0008 HLPERIOD1 | 
|  | * 0x000C PERIOD1 | 
|  | * 0x0010 HLPERIOD2 | 
|  | * 0x0014 PERIOD2 | 
|  | * 0x0018 HLPERIOD3 | 
|  | * 0x001C PERIOD3 | 
|  | * Four groups and every group is composed of HLPERIOD & PERIOD | 
|  | */ | 
|  | #define SG2042_PWM_HLPERIOD(chan) ((chan) * 8 + 0) | 
|  | #define SG2042_PWM_PERIOD(chan) ((chan) * 8 + 4) | 
|  |  | 
|  | #define SG2044_PWM_POLARITY		0x40 | 
|  | #define SG2044_PWM_PWMSTART		0x44 | 
|  | #define SG2044_PWM_OE			0xd0 | 
|  |  | 
|  | #define SG2042_PWM_CHANNELNUM	4 | 
|  |  | 
|  | /** | 
|  | * struct sg2042_pwm_ddata - private driver data | 
|  | * @base:		base address of mapped PWM registers | 
|  | * @clk_rate_hz:	rate of base clock in HZ | 
|  | */ | 
|  | struct sg2042_pwm_ddata { | 
|  | void __iomem *base; | 
|  | unsigned long clk_rate_hz; | 
|  | }; | 
|  |  | 
|  | struct sg2042_chip_data { | 
|  | const struct pwm_ops ops; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * period_ticks: PERIOD | 
|  | * hlperiod_ticks: HLPERIOD | 
|  | */ | 
|  | static void pwm_sg2042_config(struct sg2042_pwm_ddata *ddata, unsigned int chan, | 
|  | u32 period_ticks, u32 hlperiod_ticks) | 
|  | { | 
|  | void __iomem *base = ddata->base; | 
|  |  | 
|  | writel(period_ticks, base + SG2042_PWM_PERIOD(chan)); | 
|  | writel(hlperiod_ticks, base + SG2042_PWM_HLPERIOD(chan)); | 
|  | } | 
|  |  | 
|  | static void pwm_sg2042_set_dutycycle(struct pwm_chip *chip, struct pwm_device *pwm, | 
|  | const struct pwm_state *state) | 
|  | { | 
|  | struct sg2042_pwm_ddata *ddata = pwmchip_get_drvdata(chip); | 
|  | u32 hlperiod_ticks; | 
|  | u32 period_ticks; | 
|  |  | 
|  | /* | 
|  | * Duration of High level (duty_cycle) = HLPERIOD x Period_of_input_clk | 
|  | * Duration of One Cycle (period) = PERIOD x Period_of_input_clk | 
|  | */ | 
|  | period_ticks = min(mul_u64_u64_div_u64(ddata->clk_rate_hz, state->period, NSEC_PER_SEC), U32_MAX); | 
|  | hlperiod_ticks = min(mul_u64_u64_div_u64(ddata->clk_rate_hz, state->duty_cycle, NSEC_PER_SEC), U32_MAX); | 
|  |  | 
|  | dev_dbg(pwmchip_parent(chip), "chan[%u]: ENABLE=%u, PERIOD=%u, HLPERIOD=%u, POLARITY=%u\n", | 
|  | pwm->hwpwm, state->enabled, period_ticks, hlperiod_ticks, state->polarity); | 
|  |  | 
|  | pwm_sg2042_config(ddata, pwm->hwpwm, period_ticks, hlperiod_ticks); | 
|  | } | 
|  |  | 
|  | static int pwm_sg2042_apply(struct pwm_chip *chip, struct pwm_device *pwm, | 
|  | const struct pwm_state *state) | 
|  | { | 
|  | struct sg2042_pwm_ddata *ddata = pwmchip_get_drvdata(chip); | 
|  |  | 
|  | if (state->polarity == PWM_POLARITY_INVERSED) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!state->enabled) { | 
|  | pwm_sg2042_config(ddata, pwm->hwpwm, 0, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | pwm_sg2042_set_dutycycle(chip, pwm, state); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pwm_sg2042_get_state(struct pwm_chip *chip, struct pwm_device *pwm, | 
|  | struct pwm_state *state) | 
|  | { | 
|  | struct sg2042_pwm_ddata *ddata = pwmchip_get_drvdata(chip); | 
|  | unsigned int chan = pwm->hwpwm; | 
|  | u32 hlperiod_ticks; | 
|  | u32 period_ticks; | 
|  |  | 
|  | period_ticks = readl(ddata->base + SG2042_PWM_PERIOD(chan)); | 
|  | hlperiod_ticks = readl(ddata->base + SG2042_PWM_HLPERIOD(chan)); | 
|  |  | 
|  | if (!period_ticks) { | 
|  | state->enabled = false; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (hlperiod_ticks > period_ticks) | 
|  | hlperiod_ticks = period_ticks; | 
|  |  | 
|  | state->enabled = true; | 
|  | state->period = DIV_ROUND_UP_ULL((u64)period_ticks * NSEC_PER_SEC, ddata->clk_rate_hz); | 
|  | state->duty_cycle = DIV_ROUND_UP_ULL((u64)hlperiod_ticks * NSEC_PER_SEC, ddata->clk_rate_hz); | 
|  | state->polarity = PWM_POLARITY_NORMAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pwm_sg2044_set_outputen(struct sg2042_pwm_ddata *ddata, struct pwm_device *pwm, | 
|  | bool enabled) | 
|  | { | 
|  | u32 pwmstart; | 
|  |  | 
|  | pwmstart = readl(ddata->base + SG2044_PWM_PWMSTART); | 
|  |  | 
|  | if (enabled) | 
|  | pwmstart |= BIT(pwm->hwpwm); | 
|  | else | 
|  | pwmstart &= ~BIT(pwm->hwpwm); | 
|  |  | 
|  | writel(pwmstart, ddata->base + SG2044_PWM_PWMSTART); | 
|  | } | 
|  |  | 
|  | static void pwm_sg2044_set_outputdir(struct sg2042_pwm_ddata *ddata, struct pwm_device *pwm, | 
|  | bool enabled) | 
|  | { | 
|  | u32 pwm_oe; | 
|  |  | 
|  | pwm_oe = readl(ddata->base + SG2044_PWM_OE); | 
|  |  | 
|  | if (enabled) | 
|  | pwm_oe |= BIT(pwm->hwpwm); | 
|  | else | 
|  | pwm_oe &= ~BIT(pwm->hwpwm); | 
|  |  | 
|  | writel(pwm_oe, ddata->base + SG2044_PWM_OE); | 
|  | } | 
|  |  | 
|  | static void pwm_sg2044_set_polarity(struct sg2042_pwm_ddata *ddata, struct pwm_device *pwm, | 
|  | const struct pwm_state *state) | 
|  | { | 
|  | u32 pwm_polarity; | 
|  |  | 
|  | pwm_polarity = readl(ddata->base + SG2044_PWM_POLARITY); | 
|  |  | 
|  | if (state->polarity == PWM_POLARITY_NORMAL) | 
|  | pwm_polarity &= ~BIT(pwm->hwpwm); | 
|  | else | 
|  | pwm_polarity |= BIT(pwm->hwpwm); | 
|  |  | 
|  | writel(pwm_polarity, ddata->base + SG2044_PWM_POLARITY); | 
|  | } | 
|  |  | 
|  | static int pwm_sg2044_apply(struct pwm_chip *chip, struct pwm_device *pwm, | 
|  | const struct pwm_state *state) | 
|  | { | 
|  | struct sg2042_pwm_ddata *ddata = pwmchip_get_drvdata(chip); | 
|  |  | 
|  | pwm_sg2044_set_polarity(ddata, pwm, state); | 
|  |  | 
|  | pwm_sg2042_set_dutycycle(chip, pwm, state); | 
|  |  | 
|  | /* | 
|  | * re-enable PWMSTART to refresh the register period | 
|  | */ | 
|  | pwm_sg2044_set_outputen(ddata, pwm, false); | 
|  |  | 
|  | if (!state->enabled) | 
|  | return 0; | 
|  |  | 
|  | pwm_sg2044_set_outputdir(ddata, pwm, true); | 
|  | pwm_sg2044_set_outputen(ddata, pwm, true); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct sg2042_chip_data sg2042_chip_data = { | 
|  | .ops = { | 
|  | .apply = pwm_sg2042_apply, | 
|  | .get_state = pwm_sg2042_get_state, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct sg2042_chip_data sg2044_chip_data = { | 
|  | .ops = { | 
|  | .apply = pwm_sg2044_apply, | 
|  | .get_state = pwm_sg2042_get_state, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id sg2042_pwm_ids[] = { | 
|  | { | 
|  | .compatible = "sophgo,sg2042-pwm", | 
|  | .data = &sg2042_chip_data | 
|  | }, | 
|  | { | 
|  | .compatible = "sophgo,sg2044-pwm", | 
|  | .data = &sg2044_chip_data | 
|  | }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, sg2042_pwm_ids); | 
|  |  | 
|  | static int pwm_sg2042_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | const struct sg2042_chip_data *chip_data; | 
|  | struct sg2042_pwm_ddata *ddata; | 
|  | struct reset_control *rst; | 
|  | struct pwm_chip *chip; | 
|  | struct clk *clk; | 
|  | int ret; | 
|  |  | 
|  | chip_data = device_get_match_data(dev); | 
|  | if (!chip_data) | 
|  | return -ENODEV; | 
|  |  | 
|  | chip = devm_pwmchip_alloc(dev, SG2042_PWM_CHANNELNUM, sizeof(*ddata)); | 
|  | if (IS_ERR(chip)) | 
|  | return PTR_ERR(chip); | 
|  | ddata = pwmchip_get_drvdata(chip); | 
|  |  | 
|  | ddata->base = devm_platform_ioremap_resource(pdev, 0); | 
|  | if (IS_ERR(ddata->base)) | 
|  | return PTR_ERR(ddata->base); | 
|  |  | 
|  | clk = devm_clk_get_enabled(dev, "apb"); | 
|  | if (IS_ERR(clk)) | 
|  | return dev_err_probe(dev, PTR_ERR(clk), "Failed to get base clk\n"); | 
|  |  | 
|  | ret = devm_clk_rate_exclusive_get(dev, clk); | 
|  | if (ret) | 
|  | return dev_err_probe(dev, ret, "Failed to get exclusive rate\n"); | 
|  |  | 
|  | ddata->clk_rate_hz = clk_get_rate(clk); | 
|  | /* period = PERIOD * NSEC_PER_SEC / clk_rate_hz */ | 
|  | if (!ddata->clk_rate_hz || ddata->clk_rate_hz > NSEC_PER_SEC) | 
|  | return dev_err_probe(dev, -EINVAL, | 
|  | "Invalid clock rate: %lu\n", ddata->clk_rate_hz); | 
|  |  | 
|  | rst = devm_reset_control_get_optional_shared_deasserted(dev, NULL); | 
|  | if (IS_ERR(rst)) | 
|  | return dev_err_probe(dev, PTR_ERR(rst), "Failed to get reset\n"); | 
|  |  | 
|  | chip->ops = &chip_data->ops; | 
|  | chip->atomic = true; | 
|  |  | 
|  | ret = devm_pwmchip_add(dev, chip); | 
|  | if (ret < 0) | 
|  | return dev_err_probe(dev, ret, "Failed to register PWM chip\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver pwm_sg2042_driver = { | 
|  | .driver	= { | 
|  | .name = "sg2042-pwm", | 
|  | .of_match_table = sg2042_pwm_ids, | 
|  | }, | 
|  | .probe = pwm_sg2042_probe, | 
|  | }; | 
|  | module_platform_driver(pwm_sg2042_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Chen Wang"); | 
|  | MODULE_AUTHOR("Longbin Li <looong.bin@gmail.com>"); | 
|  | MODULE_DESCRIPTION("Sophgo SG2042 PWM driver"); | 
|  | MODULE_LICENSE("GPL"); |