| What: /sys/class/fpga_manager/<fpga>/name |
| Date: August 2015 |
| KernelVersion: 4.3 |
| Contact: Alan Tull <atull@opensource.altera.com> |
| Description: Name of low level fpga manager driver. |
| |
| What: /sys/class/fpga_manager/<fpga>/state |
| Date: August 2015 |
| KernelVersion: 4.3 |
| Contact: Alan Tull <atull@opensource.altera.com> |
| Description: Read fpga manager state as a string. |
| The intent is to provide enough detail that if something goes |
| wrong during FPGA programming (something that the driver can't |
| fix) then userspace can know, i.e. if the firmware request |
| fails, that could be due to not being able to find the firmware |
| file. |
| |
| This is a superset of FPGA states and fpga manager driver |
| states. The fpga manager driver is walking through these steps |
| to get the FPGA into a known operating state. It's a sequence, |
| though some steps may get skipped. Valid FPGA states will vary |
| by manufacturer; this is a superset. |
| |
| * unknown = can't determine state |
| * power off = FPGA power is off |
| * power up = FPGA reports power is up |
| * reset = FPGA held in reset state |
| * firmware request = firmware class request in progress |
| * firmware request error = firmware request failed |
| * write init = preparing FPGA for programming |
| * write init error = Error while preparing FPGA for programming |
| * write = FPGA ready to receive image data |
| * write error = Error while programming |
| * write complete = Doing post programming steps |
| * write complete error = Error while doing post programming |
| * operating = FPGA is programmed and operating |
| |
| What: /sys/class/fpga_manager/<fpga>/status |
| Date: June 2018 |
| KernelVersion: 4.19 |
| Contact: Wu Hao <hao.wu@intel.com> |
| Description: Read fpga manager status as a string. |
| If FPGA programming operation fails, it could be caused by crc |
| error or incompatible bitstream image. The intent of this |
| interface is to provide more detailed information for FPGA |
| programming errors to userspace. This is a list of strings for |
| the supported status. |
| |
| * reconfig operation error - invalid operations detected by |
| reconfiguration hardware. |
| e.g. start reconfiguration |
| with errors not cleared |
| * reconfig CRC error - CRC error detected by |
| reconfiguration hardware. |
| * reconfig incompatible image - reconfiguration image is |
| incompatible with hardware |
| * reconfig IP protocol error - protocol errors detected by |
| reconfiguration hardware |
| * reconfig fifo overflow error - FIFO overflow detected by |
| reconfiguration hardware |
