|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Intel La Jolla Cove Adapter USB-SPI driver | 
|  | * | 
|  | * Copyright (c) 2023, Intel Corporation. | 
|  | */ | 
|  |  | 
|  | #include <linux/auxiliary_bus.h> | 
|  | #include <linux/bitfield.h> | 
|  | #include <linux/bits.h> | 
|  | #include <linux/dev_printk.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/usb/ljca.h> | 
|  |  | 
|  | #define LJCA_SPI_BUS_MAX_HZ		48000000 | 
|  |  | 
|  | #define LJCA_SPI_BUF_SIZE		60u | 
|  | #define LJCA_SPI_MAX_XFER_SIZE		\ | 
|  | (LJCA_SPI_BUF_SIZE - sizeof(struct ljca_spi_xfer_packet)) | 
|  |  | 
|  | #define LJCA_SPI_CLK_MODE_POLARITY	BIT(0) | 
|  | #define LJCA_SPI_CLK_MODE_PHASE		BIT(1) | 
|  |  | 
|  | #define LJCA_SPI_XFER_INDICATOR_ID	GENMASK(5, 0) | 
|  | #define LJCA_SPI_XFER_INDICATOR_CMPL	BIT(6) | 
|  | #define LJCA_SPI_XFER_INDICATOR_INDEX	BIT(7) | 
|  |  | 
|  | /* SPI commands */ | 
|  | enum ljca_spi_cmd { | 
|  | LJCA_SPI_INIT = 1, | 
|  | LJCA_SPI_READ, | 
|  | LJCA_SPI_WRITE, | 
|  | LJCA_SPI_WRITEREAD, | 
|  | LJCA_SPI_DEINIT, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | LJCA_SPI_BUS_SPEED_24M, | 
|  | LJCA_SPI_BUS_SPEED_12M, | 
|  | LJCA_SPI_BUS_SPEED_8M, | 
|  | LJCA_SPI_BUS_SPEED_6M, | 
|  | LJCA_SPI_BUS_SPEED_4_8M, /*4.8MHz*/ | 
|  | LJCA_SPI_BUS_SPEED_MIN = LJCA_SPI_BUS_SPEED_4_8M, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | LJCA_SPI_CLOCK_LOW_POLARITY, | 
|  | LJCA_SPI_CLOCK_HIGH_POLARITY, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | LJCA_SPI_CLOCK_FIRST_PHASE, | 
|  | LJCA_SPI_CLOCK_SECOND_PHASE, | 
|  | }; | 
|  |  | 
|  | struct ljca_spi_init_packet { | 
|  | u8 index; | 
|  | u8 speed; | 
|  | u8 mode; | 
|  | } __packed; | 
|  |  | 
|  | struct ljca_spi_xfer_packet { | 
|  | u8 indicator; | 
|  | u8 len; | 
|  | u8 data[] __counted_by(len); | 
|  | } __packed; | 
|  |  | 
|  | struct ljca_spi_dev { | 
|  | struct ljca_client *ljca; | 
|  | struct spi_controller *controller; | 
|  | struct ljca_spi_info *spi_info; | 
|  | u8 speed; | 
|  | u8 mode; | 
|  |  | 
|  | u8 obuf[LJCA_SPI_BUF_SIZE]; | 
|  | u8 ibuf[LJCA_SPI_BUF_SIZE]; | 
|  | }; | 
|  |  | 
|  | static int ljca_spi_read_write(struct ljca_spi_dev *ljca_spi, const u8 *w_data, | 
|  | u8 *r_data, int len, int id, int complete, | 
|  | int cmd) | 
|  | { | 
|  | struct ljca_spi_xfer_packet *w_packet = | 
|  | (struct ljca_spi_xfer_packet *)ljca_spi->obuf; | 
|  | struct ljca_spi_xfer_packet *r_packet = | 
|  | (struct ljca_spi_xfer_packet *)ljca_spi->ibuf; | 
|  | int ret; | 
|  |  | 
|  | w_packet->indicator = FIELD_PREP(LJCA_SPI_XFER_INDICATOR_ID, id) | | 
|  | FIELD_PREP(LJCA_SPI_XFER_INDICATOR_CMPL, complete) | | 
|  | FIELD_PREP(LJCA_SPI_XFER_INDICATOR_INDEX, | 
|  | ljca_spi->spi_info->id); | 
|  |  | 
|  | if (cmd == LJCA_SPI_READ) { | 
|  | w_packet->len = sizeof(u16); | 
|  | *(__le16 *)&w_packet->data[0] = cpu_to_le16(len); | 
|  | } else { | 
|  | w_packet->len = len; | 
|  | memcpy(w_packet->data, w_data, len); | 
|  | } | 
|  |  | 
|  | ret = ljca_transfer(ljca_spi->ljca, cmd, (u8 *)w_packet, | 
|  | struct_size(w_packet, data, w_packet->len), | 
|  | (u8 *)r_packet, LJCA_SPI_BUF_SIZE); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | else if (ret < sizeof(*r_packet) || r_packet->len <= 0) | 
|  | return -EIO; | 
|  |  | 
|  | if (r_data) | 
|  | memcpy(r_data, r_packet->data, r_packet->len); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ljca_spi_init(struct ljca_spi_dev *ljca_spi, u8 div, u8 mode) | 
|  | { | 
|  | struct ljca_spi_init_packet w_packet = {}; | 
|  | int ret; | 
|  |  | 
|  | if (ljca_spi->mode == mode && ljca_spi->speed == div) | 
|  | return 0; | 
|  |  | 
|  | w_packet.index = ljca_spi->spi_info->id; | 
|  | w_packet.speed = div; | 
|  | w_packet.mode = FIELD_PREP(LJCA_SPI_CLK_MODE_POLARITY, | 
|  | (mode & SPI_CPOL) ? LJCA_SPI_CLOCK_HIGH_POLARITY : | 
|  | LJCA_SPI_CLOCK_LOW_POLARITY) | | 
|  | FIELD_PREP(LJCA_SPI_CLK_MODE_PHASE, | 
|  | (mode & SPI_CPHA) ? LJCA_SPI_CLOCK_SECOND_PHASE : | 
|  | LJCA_SPI_CLOCK_FIRST_PHASE); | 
|  |  | 
|  | ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_INIT, (u8 *)&w_packet, | 
|  | sizeof(w_packet), NULL, 0); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ljca_spi->mode = mode; | 
|  | ljca_spi->speed = div; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ljca_spi_deinit(struct ljca_spi_dev *ljca_spi) | 
|  | { | 
|  | struct ljca_spi_init_packet w_packet = {}; | 
|  | int ret; | 
|  |  | 
|  | w_packet.index = ljca_spi->spi_info->id; | 
|  |  | 
|  | ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_DEINIT, (u8 *)&w_packet, | 
|  | sizeof(w_packet), NULL, 0); | 
|  |  | 
|  | return ret < 0 ? ret : 0; | 
|  | } | 
|  |  | 
|  | static inline int ljca_spi_transfer(struct ljca_spi_dev *ljca_spi, | 
|  | const u8 *tx_data, u8 *rx_data, u16 len) | 
|  | { | 
|  | int complete, cur_len; | 
|  | int remaining = len; | 
|  | int cmd, ret, i; | 
|  | int offset = 0; | 
|  |  | 
|  | if (tx_data && rx_data) | 
|  | cmd = LJCA_SPI_WRITEREAD; | 
|  | else if (tx_data) | 
|  | cmd = LJCA_SPI_WRITE; | 
|  | else if (rx_data) | 
|  | cmd = LJCA_SPI_READ; | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | for (i = 0; remaining > 0; i++) { | 
|  | cur_len = min_t(unsigned int, remaining, LJCA_SPI_MAX_XFER_SIZE); | 
|  | complete = (cur_len == remaining); | 
|  |  | 
|  | ret = ljca_spi_read_write(ljca_spi, | 
|  | tx_data ? tx_data + offset : NULL, | 
|  | rx_data ? rx_data + offset : NULL, | 
|  | cur_len, i, complete, cmd); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | offset += cur_len; | 
|  | remaining -= cur_len; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ljca_spi_transfer_one(struct spi_controller *controller, | 
|  | struct spi_device *spi, | 
|  | struct spi_transfer *xfer) | 
|  | { | 
|  | u8 div = DIV_ROUND_UP(controller->max_speed_hz, xfer->speed_hz) / 2 - 1; | 
|  | struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller); | 
|  | int ret; | 
|  |  | 
|  | div = min_t(u8, LJCA_SPI_BUS_SPEED_MIN, div); | 
|  |  | 
|  | ret = ljca_spi_init(ljca_spi, div, spi->mode); | 
|  | if (ret) { | 
|  | dev_err(&ljca_spi->ljca->auxdev.dev, | 
|  | "cannot initialize transfer ret %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ljca_spi_transfer(ljca_spi, xfer->tx_buf, xfer->rx_buf, xfer->len); | 
|  | if (ret) | 
|  | dev_err(&ljca_spi->ljca->auxdev.dev, | 
|  | "transfer failed len: %d\n", xfer->len); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ljca_spi_probe(struct auxiliary_device *auxdev, | 
|  | const struct auxiliary_device_id *aux_dev_id) | 
|  | { | 
|  | struct ljca_client *ljca = auxiliary_dev_to_ljca_client(auxdev); | 
|  | struct spi_controller *controller; | 
|  | struct ljca_spi_dev *ljca_spi; | 
|  | int ret; | 
|  |  | 
|  | controller = devm_spi_alloc_host(&auxdev->dev, sizeof(*ljca_spi)); | 
|  | if (!controller) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ljca_spi = spi_controller_get_devdata(controller); | 
|  | ljca_spi->ljca = ljca; | 
|  | ljca_spi->spi_info = dev_get_platdata(&auxdev->dev); | 
|  | ljca_spi->controller = controller; | 
|  |  | 
|  | controller->bus_num = -1; | 
|  | controller->mode_bits = SPI_CPHA | SPI_CPOL; | 
|  | controller->transfer_one = ljca_spi_transfer_one; | 
|  | controller->auto_runtime_pm = false; | 
|  | controller->max_speed_hz = LJCA_SPI_BUS_MAX_HZ; | 
|  |  | 
|  | device_set_node(&ljca_spi->controller->dev, dev_fwnode(&auxdev->dev)); | 
|  | auxiliary_set_drvdata(auxdev, controller); | 
|  |  | 
|  | ret = spi_register_controller(controller); | 
|  | if (ret) | 
|  | dev_err(&auxdev->dev, "Failed to register controller\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ljca_spi_dev_remove(struct auxiliary_device *auxdev) | 
|  | { | 
|  | struct spi_controller *controller = auxiliary_get_drvdata(auxdev); | 
|  | struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller); | 
|  |  | 
|  | spi_unregister_controller(controller); | 
|  | ljca_spi_deinit(ljca_spi); | 
|  | } | 
|  |  | 
|  | static int ljca_spi_dev_suspend(struct device *dev) | 
|  | { | 
|  | struct spi_controller *controller = dev_get_drvdata(dev); | 
|  |  | 
|  | return spi_controller_suspend(controller); | 
|  | } | 
|  |  | 
|  | static int ljca_spi_dev_resume(struct device *dev) | 
|  | { | 
|  | struct spi_controller *controller = dev_get_drvdata(dev); | 
|  |  | 
|  | return spi_controller_resume(controller); | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops ljca_spi_pm = { | 
|  | SYSTEM_SLEEP_PM_OPS(ljca_spi_dev_suspend, ljca_spi_dev_resume) | 
|  | }; | 
|  |  | 
|  | static const struct auxiliary_device_id ljca_spi_id_table[] = { | 
|  | { "usb_ljca.ljca-spi", 0 }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(auxiliary, ljca_spi_id_table); | 
|  |  | 
|  | static struct auxiliary_driver ljca_spi_driver = { | 
|  | .driver.pm	= &ljca_spi_pm, | 
|  | .probe		= ljca_spi_probe, | 
|  | .remove		= ljca_spi_dev_remove, | 
|  | .id_table	= ljca_spi_id_table, | 
|  | }; | 
|  | module_auxiliary_driver(ljca_spi_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Wentong Wu <wentong.wu@intel.com>"); | 
|  | MODULE_AUTHOR("Zhifeng Wang <zhifeng.wang@intel.com>"); | 
|  | MODULE_AUTHOR("Lixu Zhang <lixu.zhang@intel.com>"); | 
|  | MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB-SPI driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_IMPORT_NS("LJCA"); |