|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * USB Serial Converter driver | 
|  | * | 
|  | * Copyright (C) 2009 - 2013 Johan Hovold (jhovold@gmail.com) | 
|  | * Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com) | 
|  | * Copyright (C) 2000 Peter Berger (pberger@brimson.com) | 
|  | * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com) | 
|  | * | 
|  | * This driver was originally based on the ACM driver by Armin Fuerst (which was | 
|  | * based on a driver by Brad Keryan) | 
|  | * | 
|  | * See Documentation/usb/usb-serial.rst for more information on using this | 
|  | * driver | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/tty_driver.h> | 
|  | #include <linux/tty_flip.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/uaccess.h> | 
|  | #include <linux/serial.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/serial.h> | 
|  | #include <linux/kfifo.h> | 
|  | #include <linux/idr.h> | 
|  |  | 
|  | #define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>" | 
|  | #define DRIVER_DESC "USB Serial Driver core" | 
|  |  | 
|  | #define USB_SERIAL_TTY_MAJOR	188 | 
|  | #define USB_SERIAL_TTY_MINORS	512	/* should be enough for a while */ | 
|  |  | 
|  | /* There is no MODULE_DEVICE_TABLE for usbserial.c.  Instead | 
|  | the MODULE_DEVICE_TABLE declarations in each serial driver | 
|  | cause the "hotplug" program to pull in whatever module is necessary | 
|  | via modprobe, and modprobe will load usbserial because the serial | 
|  | drivers depend on it. | 
|  | */ | 
|  |  | 
|  | static DEFINE_IDR(serial_minors); | 
|  | static DEFINE_MUTEX(table_lock); | 
|  | static LIST_HEAD(usb_serial_driver_list); | 
|  |  | 
|  | /* | 
|  | * Look up the serial port structure.  If it is found and it hasn't been | 
|  | * disconnected, return with the parent usb_serial structure's disc_mutex held | 
|  | * and its refcount incremented.  Otherwise return NULL. | 
|  | */ | 
|  | struct usb_serial_port *usb_serial_port_get_by_minor(unsigned minor) | 
|  | { | 
|  | struct usb_serial *serial; | 
|  | struct usb_serial_port *port; | 
|  |  | 
|  | mutex_lock(&table_lock); | 
|  | port = idr_find(&serial_minors, minor); | 
|  | if (!port) | 
|  | goto exit; | 
|  |  | 
|  | serial = port->serial; | 
|  | mutex_lock(&serial->disc_mutex); | 
|  | if (serial->disconnected) { | 
|  | mutex_unlock(&serial->disc_mutex); | 
|  | port = NULL; | 
|  | } else { | 
|  | kref_get(&serial->kref); | 
|  | } | 
|  | exit: | 
|  | mutex_unlock(&table_lock); | 
|  | return port; | 
|  | } | 
|  |  | 
|  | static int allocate_minors(struct usb_serial *serial, int num_ports) | 
|  | { | 
|  | struct usb_serial_port *port; | 
|  | unsigned int i, j; | 
|  | int minor; | 
|  |  | 
|  | dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports); | 
|  |  | 
|  | mutex_lock(&table_lock); | 
|  | for (i = 0; i < num_ports; ++i) { | 
|  | port = serial->port[i]; | 
|  | minor = idr_alloc(&serial_minors, port, 0, | 
|  | USB_SERIAL_TTY_MINORS, GFP_KERNEL); | 
|  | if (minor < 0) | 
|  | goto error; | 
|  | port->minor = minor; | 
|  | port->port_number = i; | 
|  | } | 
|  | serial->minors_reserved = 1; | 
|  | mutex_unlock(&table_lock); | 
|  | return 0; | 
|  | error: | 
|  | /* unwind the already allocated minors */ | 
|  | for (j = 0; j < i; ++j) | 
|  | idr_remove(&serial_minors, serial->port[j]->minor); | 
|  | mutex_unlock(&table_lock); | 
|  | return minor; | 
|  | } | 
|  |  | 
|  | static void release_minors(struct usb_serial *serial) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | mutex_lock(&table_lock); | 
|  | for (i = 0; i < serial->num_ports; ++i) | 
|  | idr_remove(&serial_minors, serial->port[i]->minor); | 
|  | mutex_unlock(&table_lock); | 
|  | serial->minors_reserved = 0; | 
|  | } | 
|  |  | 
|  | int usb_serial_claim_interface(struct usb_serial *serial, struct usb_interface *intf) | 
|  | { | 
|  | struct usb_driver *driver = serial->type->usb_driver; | 
|  | int ret; | 
|  |  | 
|  | if (serial->sibling) | 
|  | return -EBUSY; | 
|  |  | 
|  | ret = usb_driver_claim_interface(driver, intf, serial); | 
|  | if (ret) { | 
|  | dev_err(&serial->interface->dev, | 
|  | "failed to claim sibling interface: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | serial->sibling = intf; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(usb_serial_claim_interface); | 
|  |  | 
|  | static void release_sibling(struct usb_serial *serial, struct usb_interface *intf) | 
|  | { | 
|  | struct usb_driver *driver = serial->type->usb_driver; | 
|  | struct usb_interface *sibling; | 
|  |  | 
|  | if (!serial->sibling) | 
|  | return; | 
|  |  | 
|  | if (intf == serial->sibling) | 
|  | sibling = serial->interface; | 
|  | else | 
|  | sibling = serial->sibling; | 
|  |  | 
|  | usb_set_intfdata(sibling, NULL); | 
|  | usb_driver_release_interface(driver, sibling); | 
|  | } | 
|  |  | 
|  | static void destroy_serial(struct kref *kref) | 
|  | { | 
|  | struct usb_serial *serial; | 
|  | struct usb_serial_port *port; | 
|  | int i; | 
|  |  | 
|  | serial = to_usb_serial(kref); | 
|  |  | 
|  | /* return the minor range that this device had */ | 
|  | if (serial->minors_reserved) | 
|  | release_minors(serial); | 
|  |  | 
|  | if (serial->attached && serial->type->release) | 
|  | serial->type->release(serial); | 
|  |  | 
|  | /* Now that nothing is using the ports, they can be freed */ | 
|  | for (i = 0; i < serial->num_port_pointers; ++i) { | 
|  | port = serial->port[i]; | 
|  | if (port) { | 
|  | port->serial = NULL; | 
|  | put_device(&port->dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | usb_put_intf(serial->interface); | 
|  | usb_put_dev(serial->dev); | 
|  | kfree(serial); | 
|  | } | 
|  |  | 
|  | void usb_serial_put(struct usb_serial *serial) | 
|  | { | 
|  | kref_put(&serial->kref, destroy_serial); | 
|  | } | 
|  |  | 
|  | /***************************************************************************** | 
|  | * Driver tty interface functions | 
|  | *****************************************************************************/ | 
|  |  | 
|  | /** | 
|  | * serial_install - install tty | 
|  | * @driver: the driver (USB in our case) | 
|  | * @tty: the tty being created | 
|  | * | 
|  | * Initialise the termios structure for this tty.  We use the default | 
|  | * USB serial settings but permit them to be overridden by | 
|  | * serial->type->init_termios on first open. | 
|  | * | 
|  | * This is the first place a new tty gets used.  Hence this is where we | 
|  | * acquire references to the usb_serial structure and the driver module, | 
|  | * where we store a pointer to the port.  All these actions are reversed | 
|  | * in serial_cleanup(). | 
|  | */ | 
|  | static int serial_install(struct tty_driver *driver, struct tty_struct *tty) | 
|  | { | 
|  | int idx = tty->index; | 
|  | struct usb_serial *serial; | 
|  | struct usb_serial_port *port; | 
|  | bool init_termios; | 
|  | int retval = -ENODEV; | 
|  |  | 
|  | port = usb_serial_port_get_by_minor(idx); | 
|  | if (!port) | 
|  | return retval; | 
|  |  | 
|  | serial = port->serial; | 
|  | if (!try_module_get(serial->type->driver.owner)) | 
|  | goto err_put_serial; | 
|  |  | 
|  | init_termios = (driver->termios[idx] == NULL); | 
|  |  | 
|  | retval = tty_standard_install(driver, tty); | 
|  | if (retval) | 
|  | goto err_put_module; | 
|  |  | 
|  | mutex_unlock(&serial->disc_mutex); | 
|  |  | 
|  | /* allow the driver to update the initial settings */ | 
|  | if (init_termios && serial->type->init_termios) | 
|  | serial->type->init_termios(tty); | 
|  |  | 
|  | tty->driver_data = port; | 
|  |  | 
|  | return retval; | 
|  |  | 
|  | err_put_module: | 
|  | module_put(serial->type->driver.owner); | 
|  | err_put_serial: | 
|  | usb_serial_put(serial); | 
|  | mutex_unlock(&serial->disc_mutex); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty) | 
|  | { | 
|  | struct usb_serial_port *port = | 
|  | container_of(tport, struct usb_serial_port, port); | 
|  | struct usb_serial *serial = port->serial; | 
|  | int retval; | 
|  |  | 
|  | mutex_lock(&serial->disc_mutex); | 
|  | if (serial->disconnected) { | 
|  | retval = -ENODEV; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | retval = usb_autopm_get_interface(serial->interface); | 
|  | if (retval) | 
|  | goto out_unlock; | 
|  |  | 
|  | retval = port->serial->type->open(tty, port); | 
|  | if (retval) | 
|  | usb_autopm_put_interface(serial->interface); | 
|  | out_unlock: | 
|  | mutex_unlock(&serial->disc_mutex); | 
|  |  | 
|  | if (retval < 0) | 
|  | retval = usb_translate_errors(retval); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int serial_open(struct tty_struct *tty, struct file *filp) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | return tty_port_open(&port->port, tty, filp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * serial_port_shutdown - shut down hardware | 
|  | * @tport: tty port to shut down | 
|  | * | 
|  | * Shut down a USB serial port. Serialized against activate by the | 
|  | * tport mutex and kept to matching open/close pairs | 
|  | * of calls by the tty-port initialized flag. | 
|  | * | 
|  | * Not called if tty is console. | 
|  | */ | 
|  | static void serial_port_shutdown(struct tty_port *tport) | 
|  | { | 
|  | struct usb_serial_port *port = | 
|  | container_of(tport, struct usb_serial_port, port); | 
|  | struct usb_serial_driver *drv = port->serial->type; | 
|  |  | 
|  | if (drv->close) | 
|  | drv->close(port); | 
|  |  | 
|  | usb_autopm_put_interface(port->serial->interface); | 
|  | } | 
|  |  | 
|  | static void serial_hangup(struct tty_struct *tty) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | tty_port_hangup(&port->port); | 
|  | } | 
|  |  | 
|  | static void serial_close(struct tty_struct *tty, struct file *filp) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | tty_port_close(&port->port, tty, filp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * serial_cleanup - free resources post close/hangup | 
|  | * @tty: tty to clean up | 
|  | * | 
|  | * Do the resource freeing and refcount dropping for the port. | 
|  | * Avoid freeing the console. | 
|  | * | 
|  | * Called asynchronously after the last tty kref is dropped. | 
|  | */ | 
|  | static void serial_cleanup(struct tty_struct *tty) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  | struct usb_serial *serial; | 
|  | struct module *owner; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | /* The console is magical.  Do not hang up the console hardware | 
|  | * or there will be tears. | 
|  | */ | 
|  | if (port->port.console) | 
|  | return; | 
|  |  | 
|  | tty->driver_data = NULL; | 
|  |  | 
|  | serial = port->serial; | 
|  | owner = serial->type->driver.owner; | 
|  |  | 
|  | usb_serial_put(serial); | 
|  | module_put(owner); | 
|  | } | 
|  |  | 
|  | static ssize_t serial_write(struct tty_struct *tty, const u8 *buf, size_t count) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  | int retval = -ENODEV; | 
|  |  | 
|  | if (port->serial->dev->state == USB_STATE_NOTATTACHED) | 
|  | goto exit; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s - %zu byte(s)\n", __func__, count); | 
|  |  | 
|  | retval = port->serial->type->write(tty, port, buf, count); | 
|  | if (retval < 0) | 
|  | retval = usb_translate_errors(retval); | 
|  | exit: | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static unsigned int serial_write_room(struct tty_struct *tty) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | return port->serial->type->write_room(tty); | 
|  | } | 
|  |  | 
|  | static unsigned int serial_chars_in_buffer(struct tty_struct *tty) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  | struct usb_serial *serial = port->serial; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | if (serial->disconnected) | 
|  | return 0; | 
|  |  | 
|  | return serial->type->chars_in_buffer(tty); | 
|  | } | 
|  |  | 
|  | static void serial_wait_until_sent(struct tty_struct *tty, int timeout) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  | struct usb_serial *serial = port->serial; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | if (!port->serial->type->wait_until_sent) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&serial->disc_mutex); | 
|  | if (!serial->disconnected) | 
|  | port->serial->type->wait_until_sent(tty, timeout); | 
|  | mutex_unlock(&serial->disc_mutex); | 
|  | } | 
|  |  | 
|  | static void serial_throttle(struct tty_struct *tty) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | if (port->serial->type->throttle) | 
|  | port->serial->type->throttle(tty); | 
|  | } | 
|  |  | 
|  | static void serial_unthrottle(struct tty_struct *tty) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | if (port->serial->type->unthrottle) | 
|  | port->serial->type->unthrottle(tty); | 
|  | } | 
|  |  | 
|  | static int serial_get_serial(struct tty_struct *tty, struct serial_struct *ss) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  | struct tty_port *tport = &port->port; | 
|  | unsigned int close_delay, closing_wait; | 
|  |  | 
|  | mutex_lock(&tport->mutex); | 
|  |  | 
|  | close_delay = jiffies_to_msecs(tport->close_delay) / 10; | 
|  | closing_wait = tport->closing_wait; | 
|  | if (closing_wait != ASYNC_CLOSING_WAIT_NONE) | 
|  | closing_wait = jiffies_to_msecs(closing_wait) / 10; | 
|  |  | 
|  | ss->line = port->minor; | 
|  | ss->close_delay = close_delay; | 
|  | ss->closing_wait = closing_wait; | 
|  |  | 
|  | if (port->serial->type->get_serial) | 
|  | port->serial->type->get_serial(tty, ss); | 
|  |  | 
|  | mutex_unlock(&tport->mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int serial_set_serial(struct tty_struct *tty, struct serial_struct *ss) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  | struct tty_port *tport = &port->port; | 
|  | unsigned int close_delay, closing_wait; | 
|  | int ret = 0; | 
|  |  | 
|  | close_delay = msecs_to_jiffies(ss->close_delay * 10); | 
|  | closing_wait = ss->closing_wait; | 
|  | if (closing_wait != ASYNC_CLOSING_WAIT_NONE) | 
|  | closing_wait = msecs_to_jiffies(closing_wait * 10); | 
|  |  | 
|  | mutex_lock(&tport->mutex); | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) { | 
|  | if (close_delay != tport->close_delay || | 
|  | closing_wait != tport->closing_wait) { | 
|  | ret = -EPERM; | 
|  | goto out_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (port->serial->type->set_serial) { | 
|  | ret = port->serial->type->set_serial(tty, ss); | 
|  | if (ret) | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | tport->close_delay = close_delay; | 
|  | tport->closing_wait = closing_wait; | 
|  | out_unlock: | 
|  | mutex_unlock(&tport->mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int serial_ioctl(struct tty_struct *tty, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  | int retval = -ENOIOCTLCMD; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s - cmd 0x%04x\n", __func__, cmd); | 
|  |  | 
|  | switch (cmd) { | 
|  | case TIOCMIWAIT: | 
|  | if (port->serial->type->tiocmiwait) | 
|  | retval = port->serial->type->tiocmiwait(tty, arg); | 
|  | break; | 
|  | default: | 
|  | if (port->serial->type->ioctl) | 
|  | retval = port->serial->type->ioctl(tty, cmd, arg); | 
|  | } | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void serial_set_termios(struct tty_struct *tty, | 
|  | const struct ktermios *old) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | if (port->serial->type->set_termios) | 
|  | port->serial->type->set_termios(tty, port, old); | 
|  | else | 
|  | tty_termios_copy_hw(&tty->termios, old); | 
|  | } | 
|  |  | 
|  | static int serial_break(struct tty_struct *tty, int break_state) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | if (port->serial->type->break_ctl) | 
|  | return port->serial->type->break_ctl(tty, break_state); | 
|  |  | 
|  | return -ENOTTY; | 
|  | } | 
|  |  | 
|  | static int serial_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | struct usb_serial *serial; | 
|  | struct usb_serial_port *port; | 
|  | int i; | 
|  | char tmp[40]; | 
|  |  | 
|  | seq_puts(m, "usbserinfo:1.0 driver:2.0\n"); | 
|  | for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) { | 
|  | port = usb_serial_port_get_by_minor(i); | 
|  | if (port == NULL) | 
|  | continue; | 
|  | serial = port->serial; | 
|  |  | 
|  | seq_printf(m, "%d:", i); | 
|  | if (serial->type->driver.owner) | 
|  | seq_printf(m, " module:%s", | 
|  | module_name(serial->type->driver.owner)); | 
|  | seq_printf(m, " name:\"%s\"", | 
|  | serial->type->description); | 
|  | seq_printf(m, " vendor:%04x product:%04x", | 
|  | le16_to_cpu(serial->dev->descriptor.idVendor), | 
|  | le16_to_cpu(serial->dev->descriptor.idProduct)); | 
|  | seq_printf(m, " num_ports:%d", serial->num_ports); | 
|  | seq_printf(m, " port:%d", port->port_number); | 
|  | usb_make_path(serial->dev, tmp, sizeof(tmp)); | 
|  | seq_printf(m, " path:%s", tmp); | 
|  |  | 
|  | seq_putc(m, '\n'); | 
|  | usb_serial_put(serial); | 
|  | mutex_unlock(&serial->disc_mutex); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int serial_tiocmget(struct tty_struct *tty) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | if (port->serial->type->tiocmget) | 
|  | return port->serial->type->tiocmget(tty); | 
|  | return -ENOTTY; | 
|  | } | 
|  |  | 
|  | static int serial_tiocmset(struct tty_struct *tty, | 
|  | unsigned int set, unsigned int clear) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | if (port->serial->type->tiocmset) | 
|  | return port->serial->type->tiocmset(tty, set, clear); | 
|  | return -ENOTTY; | 
|  | } | 
|  |  | 
|  | static int serial_get_icount(struct tty_struct *tty, | 
|  | struct serial_icounter_struct *icount) | 
|  | { | 
|  | struct usb_serial_port *port = tty->driver_data; | 
|  |  | 
|  | dev_dbg(&port->dev, "%s\n", __func__); | 
|  |  | 
|  | if (port->serial->type->get_icount) | 
|  | return port->serial->type->get_icount(tty, icount); | 
|  | return -ENOTTY; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We would be calling tty_wakeup here, but unfortunately some line | 
|  | * disciplines have an annoying habit of calling tty->write from | 
|  | * the write wakeup callback (e.g. n_hdlc.c). | 
|  | */ | 
|  | void usb_serial_port_softint(struct usb_serial_port *port) | 
|  | { | 
|  | schedule_work(&port->work); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(usb_serial_port_softint); | 
|  |  | 
|  | static void usb_serial_port_work(struct work_struct *work) | 
|  | { | 
|  | struct usb_serial_port *port = | 
|  | container_of(work, struct usb_serial_port, work); | 
|  |  | 
|  | tty_port_tty_wakeup(&port->port); | 
|  | } | 
|  |  | 
|  | static void usb_serial_port_poison_urbs(struct usb_serial_port *port) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) | 
|  | usb_poison_urb(port->read_urbs[i]); | 
|  | for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) | 
|  | usb_poison_urb(port->write_urbs[i]); | 
|  |  | 
|  | usb_poison_urb(port->interrupt_in_urb); | 
|  | usb_poison_urb(port->interrupt_out_urb); | 
|  | } | 
|  |  | 
|  | static void usb_serial_port_unpoison_urbs(struct usb_serial_port *port) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) | 
|  | usb_unpoison_urb(port->read_urbs[i]); | 
|  | for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) | 
|  | usb_unpoison_urb(port->write_urbs[i]); | 
|  |  | 
|  | usb_unpoison_urb(port->interrupt_in_urb); | 
|  | usb_unpoison_urb(port->interrupt_out_urb); | 
|  | } | 
|  |  | 
|  | static void usb_serial_port_release(struct device *dev) | 
|  | { | 
|  | struct usb_serial_port *port = to_usb_serial_port(dev); | 
|  | int i; | 
|  |  | 
|  | dev_dbg(dev, "%s\n", __func__); | 
|  |  | 
|  | usb_free_urb(port->interrupt_in_urb); | 
|  | usb_free_urb(port->interrupt_out_urb); | 
|  | for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) { | 
|  | usb_free_urb(port->read_urbs[i]); | 
|  | kfree(port->bulk_in_buffers[i]); | 
|  | } | 
|  | for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) { | 
|  | usb_free_urb(port->write_urbs[i]); | 
|  | kfree(port->bulk_out_buffers[i]); | 
|  | } | 
|  | kfifo_free(&port->write_fifo); | 
|  | kfree(port->interrupt_in_buffer); | 
|  | kfree(port->interrupt_out_buffer); | 
|  | tty_port_destroy(&port->port); | 
|  | kfree(port); | 
|  | } | 
|  |  | 
|  | static struct usb_serial *create_serial(struct usb_device *dev, | 
|  | struct usb_interface *interface, | 
|  | struct usb_serial_driver *driver) | 
|  | { | 
|  | struct usb_serial *serial; | 
|  |  | 
|  | serial = kzalloc(sizeof(*serial), GFP_KERNEL); | 
|  | if (!serial) | 
|  | return NULL; | 
|  | serial->dev = usb_get_dev(dev); | 
|  | serial->type = driver; | 
|  | serial->interface = usb_get_intf(interface); | 
|  | kref_init(&serial->kref); | 
|  | mutex_init(&serial->disc_mutex); | 
|  | serial->minors_reserved = 0; | 
|  |  | 
|  | return serial; | 
|  | } | 
|  |  | 
|  | static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf, | 
|  | struct usb_serial_driver *drv) | 
|  | { | 
|  | struct usb_dynid *dynid; | 
|  |  | 
|  | guard(mutex)(&usb_dynids_lock); | 
|  | list_for_each_entry(dynid, &drv->dynids.list, node) { | 
|  | if (usb_match_one_id(intf, &dynid->id)) { | 
|  | return &dynid->id; | 
|  | } | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv, | 
|  | struct usb_interface *intf) | 
|  | { | 
|  | const struct usb_device_id *id; | 
|  |  | 
|  | id = usb_match_id(intf, drv->id_table); | 
|  | if (id) { | 
|  | dev_dbg(&intf->dev, "static descriptor matches\n"); | 
|  | goto exit; | 
|  | } | 
|  | id = match_dynamic_id(intf, drv); | 
|  | if (id) | 
|  | dev_dbg(&intf->dev, "dynamic descriptor matches\n"); | 
|  | exit: | 
|  | return id; | 
|  | } | 
|  |  | 
|  | /* Caller must hold table_lock */ | 
|  | static struct usb_serial_driver *search_serial_device( | 
|  | struct usb_interface *iface) | 
|  | { | 
|  | const struct usb_device_id *id = NULL; | 
|  | struct usb_serial_driver *drv; | 
|  | struct usb_driver *driver = to_usb_driver(iface->dev.driver); | 
|  |  | 
|  | /* Check if the usb id matches a known device */ | 
|  | list_for_each_entry(drv, &usb_serial_driver_list, driver_list) { | 
|  | if (drv->usb_driver == driver) | 
|  | id = get_iface_id(drv, iface); | 
|  | if (id) | 
|  | return drv; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static bool serial_port_carrier_raised(struct tty_port *port) | 
|  | { | 
|  | struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); | 
|  | struct usb_serial_driver *drv = p->serial->type; | 
|  |  | 
|  | if (drv->carrier_raised) | 
|  | return drv->carrier_raised(p); | 
|  | /* No carrier control - don't block */ | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void serial_port_dtr_rts(struct tty_port *port, bool on) | 
|  | { | 
|  | struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); | 
|  | struct usb_serial_driver *drv = p->serial->type; | 
|  |  | 
|  | if (drv->dtr_rts) | 
|  | drv->dtr_rts(p, on); | 
|  | } | 
|  |  | 
|  | static ssize_t port_number_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct usb_serial_port *port = to_usb_serial_port(dev); | 
|  |  | 
|  | return sprintf(buf, "%u\n", port->port_number); | 
|  | } | 
|  | static DEVICE_ATTR_RO(port_number); | 
|  |  | 
|  | static struct attribute *usb_serial_port_attrs[] = { | 
|  | &dev_attr_port_number.attr, | 
|  | NULL | 
|  | }; | 
|  | ATTRIBUTE_GROUPS(usb_serial_port); | 
|  |  | 
|  | static const struct tty_port_operations serial_port_ops = { | 
|  | .carrier_raised		= serial_port_carrier_raised, | 
|  | .dtr_rts		= serial_port_dtr_rts, | 
|  | .activate		= serial_port_activate, | 
|  | .shutdown		= serial_port_shutdown, | 
|  | }; | 
|  |  | 
|  | static void store_endpoint(struct usb_serial *serial, | 
|  | struct usb_serial_endpoints *epds, | 
|  | struct usb_endpoint_descriptor *epd) | 
|  | { | 
|  | struct device *dev = &serial->interface->dev; | 
|  | u8 addr = epd->bEndpointAddress; | 
|  |  | 
|  | if (usb_endpoint_is_bulk_in(epd)) { | 
|  | if (epds->num_bulk_in == ARRAY_SIZE(epds->bulk_in)) | 
|  | return; | 
|  | dev_dbg(dev, "found bulk in endpoint %02x\n", addr); | 
|  | epds->bulk_in[epds->num_bulk_in++] = epd; | 
|  | } else if (usb_endpoint_is_bulk_out(epd)) { | 
|  | if (epds->num_bulk_out == ARRAY_SIZE(epds->bulk_out)) | 
|  | return; | 
|  | dev_dbg(dev, "found bulk out endpoint %02x\n", addr); | 
|  | epds->bulk_out[epds->num_bulk_out++] = epd; | 
|  | } else if (usb_endpoint_is_int_in(epd)) { | 
|  | if (epds->num_interrupt_in == ARRAY_SIZE(epds->interrupt_in)) | 
|  | return; | 
|  | dev_dbg(dev, "found interrupt in endpoint %02x\n", addr); | 
|  | epds->interrupt_in[epds->num_interrupt_in++] = epd; | 
|  | } else if (usb_endpoint_is_int_out(epd)) { | 
|  | if (epds->num_interrupt_out == ARRAY_SIZE(epds->interrupt_out)) | 
|  | return; | 
|  | dev_dbg(dev, "found interrupt out endpoint %02x\n", addr); | 
|  | epds->interrupt_out[epds->num_interrupt_out++] = epd; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void find_endpoints(struct usb_serial *serial, | 
|  | struct usb_serial_endpoints *epds, | 
|  | struct usb_interface *intf) | 
|  | { | 
|  | struct usb_host_interface *iface_desc; | 
|  | struct usb_endpoint_descriptor *epd; | 
|  | unsigned int i; | 
|  |  | 
|  | iface_desc = intf->cur_altsetting; | 
|  | for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { | 
|  | epd = &iface_desc->endpoint[i].desc; | 
|  | store_endpoint(serial, epds, epd); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int setup_port_bulk_in(struct usb_serial_port *port, | 
|  | struct usb_endpoint_descriptor *epd) | 
|  | { | 
|  | struct usb_serial_driver *type = port->serial->type; | 
|  | struct usb_device *udev = port->serial->dev; | 
|  | int buffer_size; | 
|  | int i; | 
|  |  | 
|  | buffer_size = max_t(int, type->bulk_in_size, usb_endpoint_maxp(epd)); | 
|  | port->bulk_in_size = buffer_size; | 
|  | port->bulk_in_endpointAddress = epd->bEndpointAddress; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) { | 
|  | set_bit(i, &port->read_urbs_free); | 
|  | port->read_urbs[i] = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!port->read_urbs[i]) | 
|  | return -ENOMEM; | 
|  | port->bulk_in_buffers[i] = kmalloc(buffer_size, GFP_KERNEL); | 
|  | if (!port->bulk_in_buffers[i]) | 
|  | return -ENOMEM; | 
|  | usb_fill_bulk_urb(port->read_urbs[i], udev, | 
|  | usb_rcvbulkpipe(udev, epd->bEndpointAddress), | 
|  | port->bulk_in_buffers[i], buffer_size, | 
|  | type->read_bulk_callback, port); | 
|  | } | 
|  |  | 
|  | port->read_urb = port->read_urbs[0]; | 
|  | port->bulk_in_buffer = port->bulk_in_buffers[0]; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int setup_port_bulk_out(struct usb_serial_port *port, | 
|  | struct usb_endpoint_descriptor *epd) | 
|  | { | 
|  | struct usb_serial_driver *type = port->serial->type; | 
|  | struct usb_device *udev = port->serial->dev; | 
|  | int buffer_size; | 
|  | int i; | 
|  |  | 
|  | if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL)) | 
|  | return -ENOMEM; | 
|  | if (type->bulk_out_size) | 
|  | buffer_size = type->bulk_out_size; | 
|  | else | 
|  | buffer_size = usb_endpoint_maxp(epd); | 
|  | port->bulk_out_size = buffer_size; | 
|  | port->bulk_out_endpointAddress = epd->bEndpointAddress; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) { | 
|  | set_bit(i, &port->write_urbs_free); | 
|  | port->write_urbs[i] = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!port->write_urbs[i]) | 
|  | return -ENOMEM; | 
|  | port->bulk_out_buffers[i] = kmalloc(buffer_size, GFP_KERNEL); | 
|  | if (!port->bulk_out_buffers[i]) | 
|  | return -ENOMEM; | 
|  | usb_fill_bulk_urb(port->write_urbs[i], udev, | 
|  | usb_sndbulkpipe(udev, epd->bEndpointAddress), | 
|  | port->bulk_out_buffers[i], buffer_size, | 
|  | type->write_bulk_callback, port); | 
|  | } | 
|  |  | 
|  | port->write_urb = port->write_urbs[0]; | 
|  | port->bulk_out_buffer = port->bulk_out_buffers[0]; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int setup_port_interrupt_in(struct usb_serial_port *port, | 
|  | struct usb_endpoint_descriptor *epd) | 
|  | { | 
|  | struct usb_serial_driver *type = port->serial->type; | 
|  | struct usb_device *udev = port->serial->dev; | 
|  | int buffer_size; | 
|  |  | 
|  | port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!port->interrupt_in_urb) | 
|  | return -ENOMEM; | 
|  | buffer_size = usb_endpoint_maxp(epd); | 
|  | port->interrupt_in_endpointAddress = epd->bEndpointAddress; | 
|  | port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); | 
|  | if (!port->interrupt_in_buffer) | 
|  | return -ENOMEM; | 
|  | usb_fill_int_urb(port->interrupt_in_urb, udev, | 
|  | usb_rcvintpipe(udev, epd->bEndpointAddress), | 
|  | port->interrupt_in_buffer, buffer_size, | 
|  | type->read_int_callback, port, | 
|  | epd->bInterval); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int setup_port_interrupt_out(struct usb_serial_port *port, | 
|  | struct usb_endpoint_descriptor *epd) | 
|  | { | 
|  | struct usb_serial_driver *type = port->serial->type; | 
|  | struct usb_device *udev = port->serial->dev; | 
|  | int buffer_size; | 
|  |  | 
|  | port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!port->interrupt_out_urb) | 
|  | return -ENOMEM; | 
|  | buffer_size = usb_endpoint_maxp(epd); | 
|  | port->interrupt_out_size = buffer_size; | 
|  | port->interrupt_out_endpointAddress = epd->bEndpointAddress; | 
|  | port->interrupt_out_buffer = kmalloc(buffer_size, GFP_KERNEL); | 
|  | if (!port->interrupt_out_buffer) | 
|  | return -ENOMEM; | 
|  | usb_fill_int_urb(port->interrupt_out_urb, udev, | 
|  | usb_sndintpipe(udev, epd->bEndpointAddress), | 
|  | port->interrupt_out_buffer, buffer_size, | 
|  | type->write_int_callback, port, | 
|  | epd->bInterval); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usb_serial_probe(struct usb_interface *interface, | 
|  | const struct usb_device_id *id) | 
|  | { | 
|  | struct device *ddev = &interface->dev; | 
|  | struct usb_device *dev = interface_to_usbdev(interface); | 
|  | struct usb_serial *serial = NULL; | 
|  | struct usb_serial_port *port; | 
|  | struct usb_serial_endpoints *epds; | 
|  | struct usb_serial_driver *type = NULL; | 
|  | int retval; | 
|  | int i; | 
|  | int num_ports = 0; | 
|  | unsigned char max_endpoints; | 
|  |  | 
|  | mutex_lock(&table_lock); | 
|  | type = search_serial_device(interface); | 
|  | if (!type) { | 
|  | mutex_unlock(&table_lock); | 
|  | dev_dbg(ddev, "none matched\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (!try_module_get(type->driver.owner)) { | 
|  | mutex_unlock(&table_lock); | 
|  | dev_err(ddev, "module get failed, exiting\n"); | 
|  | return -EIO; | 
|  | } | 
|  | mutex_unlock(&table_lock); | 
|  |  | 
|  | serial = create_serial(dev, interface, type); | 
|  | if (!serial) { | 
|  | retval = -ENOMEM; | 
|  | goto err_put_module; | 
|  | } | 
|  |  | 
|  | /* if this device type has a probe function, call it */ | 
|  | if (type->probe) { | 
|  | const struct usb_device_id *id; | 
|  |  | 
|  | id = get_iface_id(type, interface); | 
|  | retval = type->probe(serial, id); | 
|  |  | 
|  | if (retval) { | 
|  | dev_dbg(ddev, "sub driver rejected device\n"); | 
|  | goto err_release_sibling; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* descriptor matches, let's find the endpoints needed */ | 
|  | epds = kzalloc(sizeof(*epds), GFP_KERNEL); | 
|  | if (!epds) { | 
|  | retval = -ENOMEM; | 
|  | goto err_release_sibling; | 
|  | } | 
|  |  | 
|  | find_endpoints(serial, epds, interface); | 
|  | if (serial->sibling) | 
|  | find_endpoints(serial, epds, serial->sibling); | 
|  |  | 
|  | if (epds->num_bulk_in < type->num_bulk_in || | 
|  | epds->num_bulk_out < type->num_bulk_out || | 
|  | epds->num_interrupt_in < type->num_interrupt_in || | 
|  | epds->num_interrupt_out < type->num_interrupt_out) { | 
|  | dev_err(ddev, "required endpoints missing\n"); | 
|  | retval = -ENODEV; | 
|  | goto err_free_epds; | 
|  | } | 
|  |  | 
|  | if (type->calc_num_ports) { | 
|  | retval = type->calc_num_ports(serial, epds); | 
|  | if (retval < 0) | 
|  | goto err_free_epds; | 
|  | num_ports = retval; | 
|  | } | 
|  |  | 
|  | if (!num_ports) | 
|  | num_ports = type->num_ports; | 
|  |  | 
|  | if (num_ports > MAX_NUM_PORTS) { | 
|  | dev_warn(ddev, "too many ports requested: %d\n", num_ports); | 
|  | num_ports = MAX_NUM_PORTS; | 
|  | } | 
|  |  | 
|  | serial->num_ports = (unsigned char)num_ports; | 
|  | serial->num_bulk_in = epds->num_bulk_in; | 
|  | serial->num_bulk_out = epds->num_bulk_out; | 
|  | serial->num_interrupt_in = epds->num_interrupt_in; | 
|  | serial->num_interrupt_out = epds->num_interrupt_out; | 
|  |  | 
|  | /* found all that we need */ | 
|  | dev_info(ddev, "%s converter detected\n", type->description); | 
|  |  | 
|  | /* create our ports, we need as many as the max endpoints */ | 
|  | /* we don't use num_ports here because some devices have more | 
|  | endpoint pairs than ports */ | 
|  | max_endpoints = max(epds->num_bulk_in, epds->num_bulk_out); | 
|  | max_endpoints = max(max_endpoints, epds->num_interrupt_in); | 
|  | max_endpoints = max(max_endpoints, epds->num_interrupt_out); | 
|  | max_endpoints = max(max_endpoints, serial->num_ports); | 
|  | serial->num_port_pointers = max_endpoints; | 
|  |  | 
|  | dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints); | 
|  | for (i = 0; i < max_endpoints; ++i) { | 
|  | port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL); | 
|  | if (!port) { | 
|  | retval = -ENOMEM; | 
|  | goto err_free_epds; | 
|  | } | 
|  | tty_port_init(&port->port); | 
|  | port->port.ops = &serial_port_ops; | 
|  | port->serial = serial; | 
|  | spin_lock_init(&port->lock); | 
|  | /* Keep this for private driver use for the moment but | 
|  | should probably go away */ | 
|  | INIT_WORK(&port->work, usb_serial_port_work); | 
|  | serial->port[i] = port; | 
|  | port->dev.parent = &interface->dev; | 
|  | port->dev.driver = NULL; | 
|  | port->dev.bus = &usb_serial_bus_type; | 
|  | port->dev.release = &usb_serial_port_release; | 
|  | port->dev.groups = usb_serial_port_groups; | 
|  | device_initialize(&port->dev); | 
|  | } | 
|  |  | 
|  | /* set up the endpoint information */ | 
|  | for (i = 0; i < epds->num_bulk_in; ++i) { | 
|  | retval = setup_port_bulk_in(serial->port[i], epds->bulk_in[i]); | 
|  | if (retval) | 
|  | goto err_free_epds; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < epds->num_bulk_out; ++i) { | 
|  | retval = setup_port_bulk_out(serial->port[i], | 
|  | epds->bulk_out[i]); | 
|  | if (retval) | 
|  | goto err_free_epds; | 
|  | } | 
|  |  | 
|  | if (serial->type->read_int_callback) { | 
|  | for (i = 0; i < epds->num_interrupt_in; ++i) { | 
|  | retval = setup_port_interrupt_in(serial->port[i], | 
|  | epds->interrupt_in[i]); | 
|  | if (retval) | 
|  | goto err_free_epds; | 
|  | } | 
|  | } else if (epds->num_interrupt_in) { | 
|  | dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n"); | 
|  | } | 
|  |  | 
|  | if (serial->type->write_int_callback) { | 
|  | for (i = 0; i < epds->num_interrupt_out; ++i) { | 
|  | retval = setup_port_interrupt_out(serial->port[i], | 
|  | epds->interrupt_out[i]); | 
|  | if (retval) | 
|  | goto err_free_epds; | 
|  | } | 
|  | } else if (epds->num_interrupt_out) { | 
|  | dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n"); | 
|  | } | 
|  |  | 
|  | usb_set_intfdata(interface, serial); | 
|  |  | 
|  | /* if this device type has an attach function, call it */ | 
|  | if (type->attach) { | 
|  | retval = type->attach(serial); | 
|  | if (retval < 0) | 
|  | goto err_free_epds; | 
|  | serial->attached = 1; | 
|  | if (retval > 0) { | 
|  | /* quietly accept this device, but don't bind to a | 
|  | serial port as it's about to disappear */ | 
|  | serial->num_ports = 0; | 
|  | goto exit; | 
|  | } | 
|  | } else { | 
|  | serial->attached = 1; | 
|  | } | 
|  |  | 
|  | retval = allocate_minors(serial, num_ports); | 
|  | if (retval) { | 
|  | dev_err(ddev, "No more free serial minor numbers\n"); | 
|  | goto err_free_epds; | 
|  | } | 
|  |  | 
|  | /* register all of the individual ports with the driver core */ | 
|  | for (i = 0; i < num_ports; ++i) { | 
|  | port = serial->port[i]; | 
|  | dev_set_name(&port->dev, "ttyUSB%d", port->minor); | 
|  | dev_dbg(ddev, "registering %s\n", dev_name(&port->dev)); | 
|  | device_enable_async_suspend(&port->dev); | 
|  |  | 
|  | retval = device_add(&port->dev); | 
|  | if (retval) | 
|  | dev_err(ddev, "Error registering port device, continuing\n"); | 
|  | } | 
|  |  | 
|  | if (num_ports > 0) | 
|  | usb_serial_console_init(serial->port[0]->minor); | 
|  | exit: | 
|  | kfree(epds); | 
|  | module_put(type->driver.owner); | 
|  | return 0; | 
|  |  | 
|  | err_free_epds: | 
|  | kfree(epds); | 
|  | err_release_sibling: | 
|  | release_sibling(serial, interface); | 
|  | usb_serial_put(serial); | 
|  | err_put_module: | 
|  | module_put(type->driver.owner); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void usb_serial_disconnect(struct usb_interface *interface) | 
|  | { | 
|  | int i; | 
|  | struct usb_serial *serial = usb_get_intfdata(interface); | 
|  | struct device *dev = &interface->dev; | 
|  | struct usb_serial_port *port; | 
|  | struct tty_struct *tty; | 
|  |  | 
|  | /* sibling interface is cleaning up */ | 
|  | if (!serial) | 
|  | return; | 
|  |  | 
|  | usb_serial_console_disconnect(serial); | 
|  |  | 
|  | mutex_lock(&serial->disc_mutex); | 
|  | /* must set a flag, to signal subdrivers */ | 
|  | serial->disconnected = 1; | 
|  | mutex_unlock(&serial->disc_mutex); | 
|  |  | 
|  | for (i = 0; i < serial->num_ports; ++i) { | 
|  | port = serial->port[i]; | 
|  | tty = tty_port_tty_get(&port->port); | 
|  | if (tty) { | 
|  | tty_vhangup(tty); | 
|  | tty_kref_put(tty); | 
|  | } | 
|  | usb_serial_port_poison_urbs(port); | 
|  | wake_up_interruptible(&port->port.delta_msr_wait); | 
|  | cancel_work_sync(&port->work); | 
|  | if (device_is_registered(&port->dev)) | 
|  | device_del(&port->dev); | 
|  | } | 
|  | if (serial->type->disconnect) | 
|  | serial->type->disconnect(serial); | 
|  |  | 
|  | release_sibling(serial, interface); | 
|  |  | 
|  | /* let the last holder of this object cause it to be cleaned up */ | 
|  | usb_serial_put(serial); | 
|  | dev_info(dev, "device disconnected\n"); | 
|  | } | 
|  |  | 
|  | int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) | 
|  | { | 
|  | struct usb_serial *serial = usb_get_intfdata(intf); | 
|  | int i, r; | 
|  |  | 
|  | /* suspend when called for first sibling interface */ | 
|  | if (serial->suspend_count++) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * serial->type->suspend() MUST return 0 in system sleep context, | 
|  | * otherwise, the resume callback has to recover device from | 
|  | * previous suspend failure. | 
|  | */ | 
|  | if (serial->type->suspend) { | 
|  | r = serial->type->suspend(serial, message); | 
|  | if (r < 0) { | 
|  | serial->suspend_count--; | 
|  | return r; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < serial->num_ports; ++i) | 
|  | usb_serial_port_poison_urbs(serial->port[i]); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(usb_serial_suspend); | 
|  |  | 
|  | static void usb_serial_unpoison_port_urbs(struct usb_serial *serial) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < serial->num_ports; ++i) | 
|  | usb_serial_port_unpoison_urbs(serial->port[i]); | 
|  | } | 
|  |  | 
|  | int usb_serial_resume(struct usb_interface *intf) | 
|  | { | 
|  | struct usb_serial *serial = usb_get_intfdata(intf); | 
|  | int rv; | 
|  |  | 
|  | /* resume when called for last sibling interface */ | 
|  | if (--serial->suspend_count) | 
|  | return 0; | 
|  |  | 
|  | usb_serial_unpoison_port_urbs(serial); | 
|  |  | 
|  | if (serial->type->resume) | 
|  | rv = serial->type->resume(serial); | 
|  | else | 
|  | rv = usb_serial_generic_resume(serial); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  | EXPORT_SYMBOL(usb_serial_resume); | 
|  |  | 
|  | static int usb_serial_reset_resume(struct usb_interface *intf) | 
|  | { | 
|  | struct usb_serial *serial = usb_get_intfdata(intf); | 
|  | int rv; | 
|  |  | 
|  | /* resume when called for last sibling interface */ | 
|  | if (--serial->suspend_count) | 
|  | return 0; | 
|  |  | 
|  | usb_serial_unpoison_port_urbs(serial); | 
|  |  | 
|  | if (serial->type->reset_resume) { | 
|  | rv = serial->type->reset_resume(serial); | 
|  | } else { | 
|  | rv = -EOPNOTSUPP; | 
|  | intf->needs_binding = 1; | 
|  | } | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static const struct tty_operations serial_ops = { | 
|  | .open =			serial_open, | 
|  | .close =		serial_close, | 
|  | .write =		serial_write, | 
|  | .hangup =		serial_hangup, | 
|  | .write_room =		serial_write_room, | 
|  | .ioctl =		serial_ioctl, | 
|  | .set_termios =		serial_set_termios, | 
|  | .throttle =		serial_throttle, | 
|  | .unthrottle =		serial_unthrottle, | 
|  | .break_ctl =		serial_break, | 
|  | .chars_in_buffer =	serial_chars_in_buffer, | 
|  | .wait_until_sent =	serial_wait_until_sent, | 
|  | .tiocmget =		serial_tiocmget, | 
|  | .tiocmset =		serial_tiocmset, | 
|  | .get_icount =		serial_get_icount, | 
|  | .set_serial =		serial_set_serial, | 
|  | .get_serial =		serial_get_serial, | 
|  | .cleanup =		serial_cleanup, | 
|  | .install =		serial_install, | 
|  | .proc_show =		serial_proc_show, | 
|  | }; | 
|  |  | 
|  |  | 
|  | struct tty_driver *usb_serial_tty_driver; | 
|  |  | 
|  | static int __init usb_serial_init(void) | 
|  | { | 
|  | int result; | 
|  |  | 
|  | usb_serial_tty_driver = tty_alloc_driver(USB_SERIAL_TTY_MINORS, | 
|  | TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV); | 
|  | if (IS_ERR(usb_serial_tty_driver)) | 
|  | return PTR_ERR(usb_serial_tty_driver); | 
|  |  | 
|  | /* Initialize our global data */ | 
|  | result = bus_register(&usb_serial_bus_type); | 
|  | if (result) { | 
|  | pr_err("%s - registering bus driver failed\n", __func__); | 
|  | goto err_put_driver; | 
|  | } | 
|  |  | 
|  | usb_serial_tty_driver->driver_name = "usbserial"; | 
|  | usb_serial_tty_driver->name = "ttyUSB"; | 
|  | usb_serial_tty_driver->major = USB_SERIAL_TTY_MAJOR; | 
|  | usb_serial_tty_driver->minor_start = 0; | 
|  | usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; | 
|  | usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL; | 
|  | usb_serial_tty_driver->init_termios = tty_std_termios; | 
|  | usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | 
|  | | HUPCL | CLOCAL; | 
|  | usb_serial_tty_driver->init_termios.c_ispeed = 9600; | 
|  | usb_serial_tty_driver->init_termios.c_ospeed = 9600; | 
|  | tty_set_operations(usb_serial_tty_driver, &serial_ops); | 
|  | result = tty_register_driver(usb_serial_tty_driver); | 
|  | if (result) { | 
|  | pr_err("%s - tty_register_driver failed\n", __func__); | 
|  | goto err_unregister_bus; | 
|  | } | 
|  |  | 
|  | /* register the generic driver, if we should */ | 
|  | result = usb_serial_generic_register(); | 
|  | if (result < 0) { | 
|  | pr_err("%s - registering generic driver failed\n", __func__); | 
|  | goto err_unregister_driver; | 
|  | } | 
|  |  | 
|  | return result; | 
|  |  | 
|  | err_unregister_driver: | 
|  | tty_unregister_driver(usb_serial_tty_driver); | 
|  | err_unregister_bus: | 
|  | bus_unregister(&usb_serial_bus_type); | 
|  | err_put_driver: | 
|  | pr_err("%s - returning with error %d\n", __func__, result); | 
|  | tty_driver_kref_put(usb_serial_tty_driver); | 
|  | return result; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __exit usb_serial_exit(void) | 
|  | { | 
|  | usb_serial_console_exit(); | 
|  |  | 
|  | usb_serial_generic_deregister(); | 
|  |  | 
|  | tty_unregister_driver(usb_serial_tty_driver); | 
|  | tty_driver_kref_put(usb_serial_tty_driver); | 
|  | bus_unregister(&usb_serial_bus_type); | 
|  | idr_destroy(&serial_minors); | 
|  | } | 
|  |  | 
|  |  | 
|  | module_init(usb_serial_init); | 
|  | module_exit(usb_serial_exit); | 
|  |  | 
|  | #define set_to_generic_if_null(type, function)				\ | 
|  | do {								\ | 
|  | if (!type->function) {					\ | 
|  | type->function = usb_serial_generic_##function;	\ | 
|  | pr_debug("%s: using generic " #function	"\n",	\ | 
|  | type->driver.name);	\ | 
|  | }							\ | 
|  | } while (0) | 
|  |  | 
|  | static void usb_serial_operations_init(struct usb_serial_driver *device) | 
|  | { | 
|  | set_to_generic_if_null(device, open); | 
|  | set_to_generic_if_null(device, write); | 
|  | set_to_generic_if_null(device, close); | 
|  | set_to_generic_if_null(device, write_room); | 
|  | set_to_generic_if_null(device, chars_in_buffer); | 
|  | if (device->tx_empty) | 
|  | set_to_generic_if_null(device, wait_until_sent); | 
|  | set_to_generic_if_null(device, read_bulk_callback); | 
|  | set_to_generic_if_null(device, write_bulk_callback); | 
|  | set_to_generic_if_null(device, process_read_urb); | 
|  | set_to_generic_if_null(device, prepare_write_buffer); | 
|  | } | 
|  |  | 
|  | static int usb_serial_register(struct usb_serial_driver *driver) | 
|  | { | 
|  | int retval; | 
|  |  | 
|  | if (usb_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!driver->description) | 
|  | driver->description = driver->driver.name; | 
|  | if (!driver->usb_driver) { | 
|  | WARN(1, "Serial driver %s has no usb_driver\n", | 
|  | driver->description); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Prevent individual ports from being unbound. */ | 
|  | driver->driver.suppress_bind_attrs = true; | 
|  |  | 
|  | usb_serial_operations_init(driver); | 
|  |  | 
|  | /* Add this device to our list of devices */ | 
|  | mutex_lock(&table_lock); | 
|  | list_add(&driver->driver_list, &usb_serial_driver_list); | 
|  |  | 
|  | retval = usb_serial_bus_register(driver); | 
|  | if (retval) { | 
|  | pr_err("problem %d when registering driver %s\n", retval, driver->description); | 
|  | list_del(&driver->driver_list); | 
|  | } else { | 
|  | pr_info("USB Serial support registered for %s\n", driver->description); | 
|  | } | 
|  | mutex_unlock(&table_lock); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void usb_serial_deregister(struct usb_serial_driver *device) | 
|  | { | 
|  | pr_info("USB Serial deregistering driver %s\n", device->description); | 
|  |  | 
|  | mutex_lock(&table_lock); | 
|  | list_del(&device->driver_list); | 
|  | mutex_unlock(&table_lock); | 
|  |  | 
|  | usb_serial_bus_deregister(device); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * __usb_serial_register_drivers - register drivers for a usb-serial module | 
|  | * @serial_drivers: NULL-terminated array of pointers to drivers to be registered | 
|  | * @owner: owning module | 
|  | * @name: name of the usb_driver for this set of @serial_drivers | 
|  | * @id_table: list of all devices this @serial_drivers set binds to | 
|  | * | 
|  | * Registers all the drivers in the @serial_drivers array, and dynamically | 
|  | * creates a struct usb_driver with the name @name and id_table of @id_table. | 
|  | */ | 
|  | int __usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[], | 
|  | struct module *owner, const char *name, | 
|  | const struct usb_device_id *id_table) | 
|  | { | 
|  | int rc; | 
|  | struct usb_driver *udriver; | 
|  | struct usb_serial_driver * const *sd; | 
|  |  | 
|  | /* | 
|  | * udriver must be registered before any of the serial drivers, | 
|  | * because the store_new_id() routine for the serial drivers (in | 
|  | * bus.c) probes udriver. | 
|  | * | 
|  | * Performance hack: We don't want udriver to be probed until | 
|  | * the serial drivers are registered, because the probe would | 
|  | * simply fail for lack of a matching serial driver. | 
|  | * So we leave udriver's id_table set to NULL until we are all set. | 
|  | * | 
|  | * Suspend/resume support is implemented in the usb-serial core, | 
|  | * so fill in the PM-related fields in udriver. | 
|  | */ | 
|  | udriver = kzalloc(sizeof(*udriver), GFP_KERNEL); | 
|  | if (!udriver) | 
|  | return -ENOMEM; | 
|  |  | 
|  | udriver->name = name; | 
|  | udriver->no_dynamic_id = 1; | 
|  | udriver->supports_autosuspend = 1; | 
|  | udriver->suspend = usb_serial_suspend; | 
|  | udriver->resume = usb_serial_resume; | 
|  | udriver->probe = usb_serial_probe; | 
|  | udriver->disconnect = usb_serial_disconnect; | 
|  |  | 
|  | /* we only set the reset_resume field if the serial_driver has one */ | 
|  | for (sd = serial_drivers; *sd; ++sd) { | 
|  | if ((*sd)->reset_resume) { | 
|  | udriver->reset_resume = usb_serial_reset_resume; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | rc = usb_register(udriver); | 
|  | if (rc) | 
|  | goto err_free_driver; | 
|  |  | 
|  | for (sd = serial_drivers; *sd; ++sd) { | 
|  | (*sd)->usb_driver = udriver; | 
|  | (*sd)->driver.owner = owner; | 
|  | rc = usb_serial_register(*sd); | 
|  | if (rc) | 
|  | goto err_deregister_drivers; | 
|  | } | 
|  |  | 
|  | /* Now set udriver's id_table and look for matches */ | 
|  | udriver->id_table = id_table; | 
|  | rc = driver_attach(&udriver->driver); | 
|  | return 0; | 
|  |  | 
|  | err_deregister_drivers: | 
|  | while (sd-- > serial_drivers) | 
|  | usb_serial_deregister(*sd); | 
|  | usb_deregister(udriver); | 
|  | err_free_driver: | 
|  | kfree(udriver); | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(__usb_serial_register_drivers); | 
|  |  | 
|  | /** | 
|  | * usb_serial_deregister_drivers - deregister drivers for a usb-serial module | 
|  | * @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered | 
|  | * | 
|  | * Deregisters all the drivers in the @serial_drivers array and deregisters and | 
|  | * frees the struct usb_driver that was created by the call to | 
|  | * usb_serial_register_drivers(). | 
|  | */ | 
|  | void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]) | 
|  | { | 
|  | struct usb_driver *udriver = (*serial_drivers)->usb_driver; | 
|  |  | 
|  | for (; *serial_drivers; ++serial_drivers) | 
|  | usb_serial_deregister(*serial_drivers); | 
|  | usb_deregister(udriver); | 
|  | kfree(udriver); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers); | 
|  |  | 
|  | MODULE_AUTHOR(DRIVER_AUTHOR); | 
|  | MODULE_DESCRIPTION(DRIVER_DESC); | 
|  | MODULE_LICENSE("GPL v2"); |