|  | /* SPDX-License-Identifier: GPL-2.0-or-later */ | 
|  | /* | 
|  | * bsru6.h - ALPS BSRU6 tuner support (moved from budget-ci.c) | 
|  | * | 
|  | * the project's page is at https://linuxtv.org | 
|  | */ | 
|  |  | 
|  | #ifndef BSRU6_H | 
|  | #define BSRU6_H | 
|  |  | 
|  | static u8 alps_bsru6_inittab[] = { | 
|  | 0x01, 0x15, | 
|  | 0x02, 0x30, | 
|  | 0x03, 0x00, | 
|  | 0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ | 
|  | 0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */ | 
|  | 0x06, 0x40,   /* DAC not used, set to high impendance mode */ | 
|  | 0x07, 0x00,   /* DAC LSB */ | 
|  | 0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */ | 
|  | 0x09, 0x00,   /* FIFO */ | 
|  | 0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ | 
|  | 0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */ | 
|  | 0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */ | 
|  | 0x10, 0x3f,   // AGC2  0x3d | 
|  | 0x11, 0x84, | 
|  | 0x12, 0xb9, | 
|  | 0x15, 0xc9,   // lock detector threshold | 
|  | 0x16, 0x00, | 
|  | 0x17, 0x00, | 
|  | 0x18, 0x00, | 
|  | 0x19, 0x00, | 
|  | 0x1a, 0x00, | 
|  | 0x1f, 0x50, | 
|  | 0x20, 0x00, | 
|  | 0x21, 0x00, | 
|  | 0x22, 0x00, | 
|  | 0x23, 0x00, | 
|  | 0x28, 0x00,  // out imp: normal  out type: parallel FEC mode:0 | 
|  | 0x29, 0x1e,  // 1/2 threshold | 
|  | 0x2a, 0x14,  // 2/3 threshold | 
|  | 0x2b, 0x0f,  // 3/4 threshold | 
|  | 0x2c, 0x09,  // 5/6 threshold | 
|  | 0x2d, 0x05,  // 7/8 threshold | 
|  | 0x2e, 0x01, | 
|  | 0x31, 0x1f,  // test all FECs | 
|  | 0x32, 0x19,  // viterbi and synchro search | 
|  | 0x33, 0xfc,  // rs control | 
|  | 0x34, 0x93,  // error control | 
|  | 0x0f, 0x52, | 
|  | 0xff, 0xff | 
|  | }; | 
|  |  | 
|  | static int alps_bsru6_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) | 
|  | { | 
|  | u8 aclk = 0; | 
|  | u8 bclk = 0; | 
|  |  | 
|  | if (srate < 1500000) { | 
|  | aclk = 0xb7; | 
|  | bclk = 0x47; | 
|  | } else if (srate < 3000000) { | 
|  | aclk = 0xb7; | 
|  | bclk = 0x4b; | 
|  | } else if (srate < 7000000) { | 
|  | aclk = 0xb7; | 
|  | bclk = 0x4f; | 
|  | } else if (srate < 14000000) { | 
|  | aclk = 0xb7; | 
|  | bclk = 0x53; | 
|  | } else if (srate < 30000000) { | 
|  | aclk = 0xb6; | 
|  | bclk = 0x53; | 
|  | } else if (srate < 45000000) { | 
|  | aclk = 0xb4; | 
|  | bclk = 0x51; | 
|  | } | 
|  |  | 
|  | stv0299_writereg(fe, 0x13, aclk); | 
|  | stv0299_writereg(fe, 0x14, bclk); | 
|  | stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); | 
|  | stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); | 
|  | stv0299_writereg(fe, 0x21, ratio & 0xf0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int alps_bsru6_tuner_set_params(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dtv_frontend_properties *p = &fe->dtv_property_cache; | 
|  | u8 buf[4]; | 
|  | u32 div; | 
|  | struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; | 
|  | struct i2c_adapter *i2c = fe->tuner_priv; | 
|  |  | 
|  | if ((p->frequency < 950000) || (p->frequency > 2150000)) | 
|  | return -EINVAL; | 
|  |  | 
|  | div = (p->frequency + (125 - 1)) / 125;	/* round correctly */ | 
|  | buf[0] = (div >> 8) & 0x7f; | 
|  | buf[1] = div & 0xff; | 
|  | buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4; | 
|  | buf[3] = 0xC4; | 
|  |  | 
|  | if (p->frequency > 1530000) | 
|  | buf[3] = 0xc0; | 
|  |  | 
|  | if (fe->ops.i2c_gate_ctrl) | 
|  | fe->ops.i2c_gate_ctrl(fe, 1); | 
|  | if (i2c_transfer(i2c, &msg, 1) != 1) | 
|  | return -EIO; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct stv0299_config alps_bsru6_config = { | 
|  | .demod_address = 0x68, | 
|  | .inittab = alps_bsru6_inittab, | 
|  | .mclk = 88000000UL, | 
|  | .invert = 1, | 
|  | .skip_reinit = 0, | 
|  | .lock_output = STV0299_LOCKOUTPUT_1, | 
|  | .volt13_op0_op1 = STV0299_VOLT13_OP1, | 
|  | .min_delay_ms = 100, | 
|  | .set_symbol_rate = alps_bsru6_set_symbol_rate, | 
|  | }; | 
|  |  | 
|  | #endif |