|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Renesas RZ/G2L USBPHY control driver | 
|  | * | 
|  | * Copyright (C) 2021 Renesas Electronics Corporation | 
|  | */ | 
|  |  | 
|  | #include <linux/io.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/reset.h> | 
|  | #include <linux/reset-controller.h> | 
|  |  | 
|  | #define RESET			0x000 | 
|  | #define VBENCTL			0x03c | 
|  |  | 
|  | #define RESET_SEL_PLLRESET	BIT(12) | 
|  | #define RESET_PLLRESET		BIT(8) | 
|  |  | 
|  | #define RESET_SEL_P2RESET	BIT(5) | 
|  | #define RESET_SEL_P1RESET	BIT(4) | 
|  | #define RESET_PHYRST_2		BIT(1) | 
|  | #define RESET_PHYRST_1		BIT(0) | 
|  |  | 
|  | #define PHY_RESET_PORT2		(RESET_SEL_P2RESET | RESET_PHYRST_2) | 
|  | #define PHY_RESET_PORT1		(RESET_SEL_P1RESET | RESET_PHYRST_1) | 
|  |  | 
|  | #define NUM_PORTS		2 | 
|  |  | 
|  | struct rzg2l_usbphy_ctrl_priv { | 
|  | struct reset_controller_dev rcdev; | 
|  | struct reset_control *rstc; | 
|  | void __iomem *base; | 
|  | struct platform_device *vdev; | 
|  |  | 
|  | spinlock_t lock; | 
|  | }; | 
|  |  | 
|  | #define rcdev_to_priv(x)	container_of(x, struct rzg2l_usbphy_ctrl_priv, rcdev) | 
|  |  | 
|  | static int rzg2l_usbphy_ctrl_assert(struct reset_controller_dev *rcdev, | 
|  | unsigned long id) | 
|  | { | 
|  | struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); | 
|  | u32 port_mask = PHY_RESET_PORT1 | PHY_RESET_PORT2; | 
|  | void __iomem *base = priv->base; | 
|  | unsigned long flags; | 
|  | u32 val; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | val = readl(base + RESET); | 
|  | val |= id ? PHY_RESET_PORT2 : PHY_RESET_PORT1; | 
|  | if (port_mask == (val & port_mask)) | 
|  | val |= RESET_PLLRESET; | 
|  | writel(val, base + RESET); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rzg2l_usbphy_ctrl_deassert(struct reset_controller_dev *rcdev, | 
|  | unsigned long id) | 
|  | { | 
|  | struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); | 
|  | void __iomem *base = priv->base; | 
|  | unsigned long flags; | 
|  | u32 val; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | val = readl(base + RESET); | 
|  |  | 
|  | val |= RESET_SEL_PLLRESET; | 
|  | val &= ~(RESET_PLLRESET | (id ? PHY_RESET_PORT2 : PHY_RESET_PORT1)); | 
|  | writel(val, base + RESET); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev, | 
|  | unsigned long id) | 
|  | { | 
|  | struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); | 
|  | u32 port_mask; | 
|  |  | 
|  | port_mask = id ? PHY_RESET_PORT2 : PHY_RESET_PORT1; | 
|  |  | 
|  | return !!(readl(priv->base + RESET) & port_mask); | 
|  | } | 
|  |  | 
|  | static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = { | 
|  | { .compatible = "renesas,rzg2l-usbphy-ctrl" }, | 
|  | { /* Sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table); | 
|  |  | 
|  | static const struct reset_control_ops rzg2l_usbphy_ctrl_reset_ops = { | 
|  | .assert = rzg2l_usbphy_ctrl_assert, | 
|  | .deassert = rzg2l_usbphy_ctrl_deassert, | 
|  | .status = rzg2l_usbphy_ctrl_status, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config rzg2l_usb_regconf = { | 
|  | .reg_bits = 32, | 
|  | .val_bits = 32, | 
|  | .reg_stride = 4, | 
|  | .max_register = 1, | 
|  | }; | 
|  |  | 
|  | static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct rzg2l_usbphy_ctrl_priv *priv; | 
|  | struct platform_device *vdev; | 
|  | struct regmap *regmap; | 
|  | unsigned long flags; | 
|  | int error; | 
|  | u32 val; | 
|  |  | 
|  | priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | 
|  | if (!priv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | priv->base = devm_platform_ioremap_resource(pdev, 0); | 
|  | if (IS_ERR(priv->base)) | 
|  | return PTR_ERR(priv->base); | 
|  |  | 
|  | regmap = devm_regmap_init_mmio(dev, priv->base + VBENCTL, &rzg2l_usb_regconf); | 
|  | if (IS_ERR(regmap)) | 
|  | return PTR_ERR(regmap); | 
|  |  | 
|  | priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); | 
|  | if (IS_ERR(priv->rstc)) | 
|  | return dev_err_probe(dev, PTR_ERR(priv->rstc), | 
|  | "failed to get reset\n"); | 
|  |  | 
|  | error = reset_control_deassert(priv->rstc); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | spin_lock_init(&priv->lock); | 
|  | dev_set_drvdata(dev, priv); | 
|  |  | 
|  | pm_runtime_enable(&pdev->dev); | 
|  | error = pm_runtime_resume_and_get(&pdev->dev); | 
|  | if (error < 0) { | 
|  | dev_err_probe(&pdev->dev, error, "pm_runtime_resume_and_get failed"); | 
|  | goto err_pm_disable_reset_deassert; | 
|  | } | 
|  |  | 
|  | /* put pll and phy into reset state */ | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  | val = readl(priv->base + RESET); | 
|  | val |= RESET_SEL_PLLRESET | RESET_PLLRESET | PHY_RESET_PORT2 | PHY_RESET_PORT1; | 
|  | writel(val, priv->base + RESET); | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  |  | 
|  | priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops; | 
|  | priv->rcdev.of_reset_n_cells = 1; | 
|  | priv->rcdev.nr_resets = NUM_PORTS; | 
|  | priv->rcdev.of_node = dev->of_node; | 
|  | priv->rcdev.dev = dev; | 
|  |  | 
|  | error = devm_reset_controller_register(dev, &priv->rcdev); | 
|  | if (error) | 
|  | goto err_pm_runtime_put; | 
|  |  | 
|  | vdev = platform_device_alloc("rzg2l-usb-vbus-regulator", pdev->id); | 
|  | if (!vdev) { | 
|  | error = -ENOMEM; | 
|  | goto err_pm_runtime_put; | 
|  | } | 
|  | vdev->dev.parent = dev; | 
|  | priv->vdev = vdev; | 
|  |  | 
|  | error = platform_device_add(vdev); | 
|  | if (error) | 
|  | goto err_device_put; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_device_put: | 
|  | platform_device_put(vdev); | 
|  | err_pm_runtime_put: | 
|  | pm_runtime_put(&pdev->dev); | 
|  | err_pm_disable_reset_deassert: | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | reset_control_assert(priv->rstc); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static void rzg2l_usbphy_ctrl_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(&pdev->dev); | 
|  |  | 
|  | platform_device_unregister(priv->vdev); | 
|  | pm_runtime_put(&pdev->dev); | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | reset_control_assert(priv->rstc); | 
|  | } | 
|  |  | 
|  | static struct platform_driver rzg2l_usbphy_ctrl_driver = { | 
|  | .driver = { | 
|  | .name		= "rzg2l_usbphy_ctrl", | 
|  | .of_match_table	= rzg2l_usbphy_ctrl_match_table, | 
|  | }, | 
|  | .probe	= rzg2l_usbphy_ctrl_probe, | 
|  | .remove = rzg2l_usbphy_ctrl_remove, | 
|  | }; | 
|  | module_platform_driver(rzg2l_usbphy_ctrl_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_DESCRIPTION("Renesas RZ/G2L USBPHY Control"); | 
|  | MODULE_AUTHOR("biju.das.jz@bp.renesas.com>"); |