|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Generic Exynos Bus frequency driver with DEVFREQ Framework | 
|  | * | 
|  | * Copyright (c) 2016 Samsung Electronics Co., Ltd. | 
|  | * Author : Chanwoo Choi <cw00.choi@samsung.com> | 
|  | * | 
|  | * This driver support Exynos Bus frequency feature by using | 
|  | * DEVFREQ framework and is based on drivers/devfreq/exynos/exynos4_bus.c. | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/devfreq.h> | 
|  | #include <linux/devfreq-event.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/pm_opp.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  |  | 
|  | #define DEFAULT_SATURATION_RATIO	40 | 
|  |  | 
|  | struct exynos_bus { | 
|  | struct device *dev; | 
|  | struct platform_device *icc_pdev; | 
|  |  | 
|  | struct devfreq *devfreq; | 
|  | struct devfreq_event_dev **edev; | 
|  | unsigned int edev_count; | 
|  | struct mutex lock; | 
|  |  | 
|  | unsigned long curr_freq; | 
|  |  | 
|  | int opp_token; | 
|  | struct clk *clk; | 
|  | unsigned int ratio; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Control the devfreq-event device to get the current state of bus | 
|  | */ | 
|  | #define exynos_bus_ops_edev(ops)				\ | 
|  | static int exynos_bus_##ops(struct exynos_bus *bus)		\ | 
|  | {								\ | 
|  | int i, ret;						\ | 
|  | \ | 
|  | for (i = 0; i < bus->edev_count; i++) {			\ | 
|  | if (!bus->edev[i])				\ | 
|  | continue;				\ | 
|  | ret = devfreq_event_##ops(bus->edev[i]);	\ | 
|  | if (ret < 0)					\ | 
|  | return ret;				\ | 
|  | }							\ | 
|  | \ | 
|  | return 0;						\ | 
|  | } | 
|  | exynos_bus_ops_edev(enable_edev); | 
|  | exynos_bus_ops_edev(disable_edev); | 
|  | exynos_bus_ops_edev(set_event); | 
|  |  | 
|  | static int exynos_bus_get_event(struct exynos_bus *bus, | 
|  | struct devfreq_event_data *edata) | 
|  | { | 
|  | struct devfreq_event_data event_data; | 
|  | unsigned long load_count = 0, total_count = 0; | 
|  | int i, ret = 0; | 
|  |  | 
|  | for (i = 0; i < bus->edev_count; i++) { | 
|  | if (!bus->edev[i]) | 
|  | continue; | 
|  |  | 
|  | ret = devfreq_event_get_event(bus->edev[i], &event_data); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (i == 0 || event_data.load_count > load_count) { | 
|  | load_count = event_data.load_count; | 
|  | total_count = event_data.total_count; | 
|  | } | 
|  | } | 
|  |  | 
|  | edata->load_count = load_count; | 
|  | edata->total_count = total_count; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * devfreq function for both simple-ondemand and passive governor | 
|  | */ | 
|  | static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags) | 
|  | { | 
|  | struct exynos_bus *bus = dev_get_drvdata(dev); | 
|  | struct dev_pm_opp *new_opp; | 
|  | int ret = 0; | 
|  |  | 
|  | /* Get correct frequency for bus. */ | 
|  | new_opp = devfreq_recommended_opp(dev, freq, flags); | 
|  | if (IS_ERR(new_opp)) { | 
|  | dev_err(dev, "failed to get recommended opp instance\n"); | 
|  | return PTR_ERR(new_opp); | 
|  | } | 
|  |  | 
|  | dev_pm_opp_put(new_opp); | 
|  |  | 
|  | /* Change voltage and frequency according to new OPP level */ | 
|  | mutex_lock(&bus->lock); | 
|  | ret = dev_pm_opp_set_rate(dev, *freq); | 
|  | if (!ret) | 
|  | bus->curr_freq = *freq; | 
|  |  | 
|  | mutex_unlock(&bus->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int exynos_bus_get_dev_status(struct device *dev, | 
|  | struct devfreq_dev_status *stat) | 
|  | { | 
|  | struct exynos_bus *bus = dev_get_drvdata(dev); | 
|  | struct devfreq_event_data edata; | 
|  | int ret; | 
|  |  | 
|  | stat->current_frequency = bus->curr_freq; | 
|  |  | 
|  | ret = exynos_bus_get_event(bus, &edata); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to get event from devfreq-event devices\n"); | 
|  | stat->total_time = stat->busy_time = 0; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | stat->busy_time = (edata.load_count * 100) / bus->ratio; | 
|  | stat->total_time = edata.total_count; | 
|  |  | 
|  | dev_dbg(dev, "Usage of devfreq-event : %lu/%lu\n", stat->busy_time, | 
|  | stat->total_time); | 
|  |  | 
|  | err: | 
|  | ret = exynos_bus_set_event(bus); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to set event to devfreq-event devices\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void exynos_bus_exit(struct device *dev) | 
|  | { | 
|  | struct exynos_bus *bus = dev_get_drvdata(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = exynos_bus_disable_edev(bus); | 
|  | if (ret < 0) | 
|  | dev_warn(dev, "failed to disable the devfreq-event devices\n"); | 
|  |  | 
|  | platform_device_unregister(bus->icc_pdev); | 
|  |  | 
|  | dev_pm_opp_of_remove_table(dev); | 
|  | dev_pm_opp_put_regulators(bus->opp_token); | 
|  | } | 
|  |  | 
|  | static void exynos_bus_passive_exit(struct device *dev) | 
|  | { | 
|  | struct exynos_bus *bus = dev_get_drvdata(dev); | 
|  |  | 
|  | platform_device_unregister(bus->icc_pdev); | 
|  |  | 
|  | dev_pm_opp_of_remove_table(dev); | 
|  | } | 
|  |  | 
|  | static int exynos_bus_parent_parse_of(struct device_node *np, | 
|  | struct exynos_bus *bus) | 
|  | { | 
|  | struct device *dev = bus->dev; | 
|  | const char *supplies[] = { "vdd", NULL }; | 
|  | int i, ret, count, size; | 
|  |  | 
|  | ret = dev_pm_opp_set_regulators(dev, supplies); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to set regulators %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | bus->opp_token = ret; | 
|  |  | 
|  | /* | 
|  | * Get the devfreq-event devices to get the current utilization of | 
|  | * buses. This raw data will be used in devfreq ondemand governor. | 
|  | */ | 
|  | count = devfreq_event_get_edev_count(dev, "devfreq-events"); | 
|  | if (count < 0) { | 
|  | dev_err(dev, "failed to get the count of devfreq-event dev\n"); | 
|  | ret = count; | 
|  | goto err_regulator; | 
|  | } | 
|  | bus->edev_count = count; | 
|  |  | 
|  | size = sizeof(*bus->edev) * count; | 
|  | bus->edev = devm_kzalloc(dev, size, GFP_KERNEL); | 
|  | if (!bus->edev) { | 
|  | ret = -ENOMEM; | 
|  | goto err_regulator; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < count; i++) { | 
|  | bus->edev[i] = devfreq_event_get_edev_by_phandle(dev, | 
|  | "devfreq-events", i); | 
|  | if (IS_ERR(bus->edev[i])) { | 
|  | ret = -EPROBE_DEFER; | 
|  | goto err_regulator; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Optionally, Get the saturation ratio according to Exynos SoC | 
|  | * When measuring the utilization of each AXI bus with devfreq-event | 
|  | * devices, the measured real cycle might be much lower than the | 
|  | * total cycle of bus during sampling rate. In result, the devfreq | 
|  | * simple-ondemand governor might not decide to change the current | 
|  | * frequency due to too utilization (= real cycle/total cycle). | 
|  | * So, this property is used to adjust the utilization when calculating | 
|  | * the busy_time in exynos_bus_get_dev_status(). | 
|  | */ | 
|  | if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio)) | 
|  | bus->ratio = DEFAULT_SATURATION_RATIO; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_regulator: | 
|  | dev_pm_opp_put_regulators(bus->opp_token); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int exynos_bus_parse_of(struct device_node *np, | 
|  | struct exynos_bus *bus) | 
|  | { | 
|  | struct device *dev = bus->dev; | 
|  | struct dev_pm_opp *opp; | 
|  | unsigned long rate; | 
|  | int ret; | 
|  |  | 
|  | /* Get the clock to provide each bus with source clock */ | 
|  | bus->clk = devm_clk_get_enabled(dev, "bus"); | 
|  | if (IS_ERR(bus->clk)) | 
|  | return dev_err_probe(dev, PTR_ERR(bus->clk), | 
|  | "failed to get bus clock\n"); | 
|  |  | 
|  | /* Get the freq and voltage from OPP table to scale the bus freq */ | 
|  | ret = dev_pm_opp_of_add_table(dev); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to get OPP table\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | rate = clk_get_rate(bus->clk); | 
|  |  | 
|  | opp = devfreq_recommended_opp(dev, &rate, 0); | 
|  | if (IS_ERR(opp)) { | 
|  | dev_err(dev, "failed to find dev_pm_opp\n"); | 
|  | ret = PTR_ERR(opp); | 
|  | goto err_opp; | 
|  | } | 
|  | bus->curr_freq = dev_pm_opp_get_freq(opp); | 
|  | dev_pm_opp_put(opp); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_opp: | 
|  | dev_pm_opp_of_remove_table(dev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int exynos_bus_profile_init(struct exynos_bus *bus, | 
|  | struct devfreq_dev_profile *profile) | 
|  | { | 
|  | struct device *dev = bus->dev; | 
|  | struct devfreq_simple_ondemand_data *ondemand_data; | 
|  | int ret; | 
|  |  | 
|  | /* Initialize the struct profile and governor data for parent device */ | 
|  | profile->polling_ms = 50; | 
|  | profile->target = exynos_bus_target; | 
|  | profile->get_dev_status = exynos_bus_get_dev_status; | 
|  | profile->exit = exynos_bus_exit; | 
|  |  | 
|  | ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL); | 
|  | if (!ondemand_data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ondemand_data->upthreshold = 40; | 
|  | ondemand_data->downdifferential = 5; | 
|  |  | 
|  | /* Add devfreq device to monitor and handle the exynos bus */ | 
|  | bus->devfreq = devm_devfreq_add_device(dev, profile, | 
|  | DEVFREQ_GOV_SIMPLE_ONDEMAND, | 
|  | ondemand_data); | 
|  | if (IS_ERR(bus->devfreq)) { | 
|  | dev_err(dev, "failed to add devfreq device\n"); | 
|  | return PTR_ERR(bus->devfreq); | 
|  | } | 
|  |  | 
|  | /* Register opp_notifier to catch the change of OPP  */ | 
|  | ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to register opp notifier\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Enable devfreq-event to get raw data which is used to determine | 
|  | * current bus load. | 
|  | */ | 
|  | ret = exynos_bus_enable_edev(bus); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to enable devfreq-event devices\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = exynos_bus_set_event(bus); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to set event to devfreq-event devices\n"); | 
|  | goto err_edev; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_edev: | 
|  | if (exynos_bus_disable_edev(bus)) | 
|  | dev_warn(dev, "failed to disable the devfreq-event devices\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int exynos_bus_profile_init_passive(struct exynos_bus *bus, | 
|  | struct devfreq_dev_profile *profile) | 
|  | { | 
|  | struct device *dev = bus->dev; | 
|  | struct devfreq_passive_data *passive_data; | 
|  | struct devfreq *parent_devfreq; | 
|  |  | 
|  | /* Initialize the struct profile and governor data for passive device */ | 
|  | profile->target = exynos_bus_target; | 
|  | profile->exit = exynos_bus_passive_exit; | 
|  |  | 
|  | /* Get the instance of parent devfreq device */ | 
|  | parent_devfreq = devfreq_get_devfreq_by_phandle(dev, "devfreq", 0); | 
|  | if (IS_ERR(parent_devfreq)) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL); | 
|  | if (!passive_data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | passive_data->parent = parent_devfreq; | 
|  |  | 
|  | /* Add devfreq device for exynos bus with passive governor */ | 
|  | bus->devfreq = devm_devfreq_add_device(dev, profile, DEVFREQ_GOV_PASSIVE, | 
|  | passive_data); | 
|  | if (IS_ERR(bus->devfreq)) { | 
|  | dev_err(dev, | 
|  | "failed to add devfreq dev with passive governor\n"); | 
|  | return PTR_ERR(bus->devfreq); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int exynos_bus_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct device_node *np = dev->of_node, *node; | 
|  | struct devfreq_dev_profile *profile; | 
|  | struct exynos_bus *bus; | 
|  | int ret, max_state; | 
|  | unsigned long min_freq, max_freq; | 
|  | bool passive = false; | 
|  |  | 
|  | if (!np) { | 
|  | dev_err(dev, "failed to find devicetree node\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); | 
|  | if (!bus) | 
|  | return -ENOMEM; | 
|  | mutex_init(&bus->lock); | 
|  | bus->dev = &pdev->dev; | 
|  | platform_set_drvdata(pdev, bus); | 
|  |  | 
|  | profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL); | 
|  | if (!profile) | 
|  | return -ENOMEM; | 
|  |  | 
|  | node = of_parse_phandle(dev->of_node, "devfreq", 0); | 
|  | if (node) { | 
|  | of_node_put(node); | 
|  | passive = true; | 
|  | } else { | 
|  | ret = exynos_bus_parent_parse_of(np, bus); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Parse the device-tree to get the resource information */ | 
|  | ret = exynos_bus_parse_of(np, bus); | 
|  | if (ret < 0) | 
|  | goto err_reg; | 
|  |  | 
|  | if (passive) | 
|  | ret = exynos_bus_profile_init_passive(bus, profile); | 
|  | else | 
|  | ret = exynos_bus_profile_init(bus, profile); | 
|  |  | 
|  | if (ret < 0) | 
|  | goto err; | 
|  |  | 
|  | /* Create child platform device for the interconnect provider */ | 
|  | if (of_property_present(dev->of_node, "#interconnect-cells")) { | 
|  | bus->icc_pdev = platform_device_register_data( | 
|  | dev, "exynos-generic-icc", | 
|  | PLATFORM_DEVID_AUTO, NULL, 0); | 
|  |  | 
|  | if (IS_ERR(bus->icc_pdev)) { | 
|  | ret = PTR_ERR(bus->icc_pdev); | 
|  | goto err; | 
|  | } | 
|  | } | 
|  |  | 
|  | max_state = bus->devfreq->max_state; | 
|  | min_freq = (bus->devfreq->freq_table[0] / 1000); | 
|  | max_freq = (bus->devfreq->freq_table[max_state - 1] / 1000); | 
|  | pr_info("exynos-bus: new bus device registered: %s (%6ld KHz ~ %6ld KHz)\n", | 
|  | dev_name(dev), min_freq, max_freq); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | dev_pm_opp_of_remove_table(dev); | 
|  | err_reg: | 
|  | dev_pm_opp_put_regulators(bus->opp_token); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void exynos_bus_shutdown(struct platform_device *pdev) | 
|  | { | 
|  | struct exynos_bus *bus = dev_get_drvdata(&pdev->dev); | 
|  |  | 
|  | devfreq_suspend_device(bus->devfreq); | 
|  | } | 
|  |  | 
|  | static int exynos_bus_resume(struct device *dev) | 
|  | { | 
|  | struct exynos_bus *bus = dev_get_drvdata(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = exynos_bus_enable_edev(bus); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to enable the devfreq-event devices\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int exynos_bus_suspend(struct device *dev) | 
|  | { | 
|  | struct exynos_bus *bus = dev_get_drvdata(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = exynos_bus_disable_edev(bus); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to disable the devfreq-event devices\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static DEFINE_SIMPLE_DEV_PM_OPS(exynos_bus_pm, | 
|  | exynos_bus_suspend, exynos_bus_resume); | 
|  |  | 
|  | static const struct of_device_id exynos_bus_of_match[] = { | 
|  | { .compatible = "samsung,exynos-bus", }, | 
|  | { /* sentinel */ }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, exynos_bus_of_match); | 
|  |  | 
|  | static struct platform_driver exynos_bus_platdrv = { | 
|  | .probe		= exynos_bus_probe, | 
|  | .shutdown	= exynos_bus_shutdown, | 
|  | .driver = { | 
|  | .name	= "exynos-bus", | 
|  | .pm	= pm_sleep_ptr(&exynos_bus_pm), | 
|  | .of_match_table = exynos_bus_of_match, | 
|  | }, | 
|  | }; | 
|  | module_platform_driver(exynos_bus_platdrv); | 
|  |  | 
|  | MODULE_SOFTDEP("pre: exynos_ppmu"); | 
|  | MODULE_DESCRIPTION("Generic Exynos Bus frequency driver"); | 
|  | MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); | 
|  | MODULE_LICENSE("GPL v2"); |