| #!/bin/sh |
| # |
| # $NetBSD: install-sh.in,v 1.4 2007/07/12 18:32:50 jlam Exp $ |
| # This script now also installs multiple files, but might choke on installing |
| # multiple files with spaces in the file names. |
| # |
| # install - install a program, script, or datafile |
| # This comes from X11R5 (mit/util/scripts/install.sh). |
| # |
| # Copyright 1991 by the Massachusetts Institute of Technology |
| # |
| # Permission to use, copy, modify, distribute, and sell this software and its |
| # documentation for any purpose is hereby granted without fee, provided that |
| # the above copyright notice appear in all copies and that both that |
| # copyright notice and this permission notice appear in supporting |
| # documentation, and that the name of M.I.T. not be used in advertising or |
| # publicity pertaining to distribution of the software without specific, |
| # written prior permission. M.I.T. makes no representations about the |
| # suitability of this software for any purpose. It is provided "as is" |
| # without express or implied warranty. |
| # |
| # Calling this script install-sh is preferred over install.sh, to prevent |
| # `make' implicit rules from creating a file called install from it |
| # when there is no Makefile. |
| # |
| # This script is compatible with the BSD install script, but was written |
| # from scratch. |
| |
| # set DOITPROG to echo to test this script |
| |
| # Don't use :- since 4.3BSD and earlier shells don't like it. |
| doit="${DOITPROG-}" |
| |
| |
| # put in absolute paths if you don't have them in your path; or use env. vars. |
| |
| awkprog="${AWKPROG-awk}" |
| mvprog="${MVPROG-mv}" |
| cpprog="${CPPROG-cp}" |
| chmodprog="${CHMODPROG-chmod}" |
| chownprog="${CHOWNPROG-chown}" |
| chgrpprog="${CHGRPPROG-chgrp}" |
| stripprog="${STRIPPROG-strip}" |
| rmprog="${RMPROG-rm}" |
| mkdirprog="${MKDIRPROG-mkdir}" |
| |
| instcmd="$mvprog" |
| pathcompchmodcmd="$chmodprog 755" |
| chmodcmd="$chmodprog 755" |
| chowncmd="" |
| chgrpcmd="" |
| stripcmd="" |
| stripflags="" |
| rmcmd="$rmprog -f" |
| mvcmd="$mvprog" |
| src="" |
| msrc="" |
| dst="" |
| dir_arg="" |
| suffix="" |
| suffixfmt="" |
| |
| while [ x"$1" != x ]; do |
| case $1 in |
| -b) suffix=".old" |
| shift |
| continue;; |
| |
| -B) suffixfmt="$2" |
| shift |
| shift |
| continue;; |
| |
| -c) instcmd="$cpprog" |
| shift |
| continue;; |
| |
| -d) dir_arg=true |
| shift |
| continue;; |
| |
| -m) chmodcmd="$chmodprog $2" |
| shift |
| shift |
| continue;; |
| |
| -o) chowncmd="$chownprog $2" |
| shift |
| shift |
| continue;; |
| |
| -g) chgrpcmd="$chgrpprog $2" |
| shift |
| shift |
| continue;; |
| |
| -s) stripcmd="$stripprog" |
| shift |
| continue;; |
| |
| -S) stripcmd="$stripprog" |
| stripflags="-S $2 $stripflags" |
| shift |
| shift |
| continue;; |
| |
| *) if [ x"$msrc" = x ] |
| then |
| msrc="$dst" |
| else |
| msrc="$msrc $dst" |
| fi |
| src="$dst" |
| dst="$1" |
| shift |
| continue;; |
| esac |
| done |
| |
| if [ x"$dir_arg" = x ] |
| then |
| dstisfile="" |
| if [ ! -d "$dst" ] |
| then |
| if [ x"$msrc" = x"$src" ] |
| then |
| dstisfile=true |
| else |
| echo "install: destination is not a directory" |
| exit 1 |
| fi |
| fi |
| else |
| msrc="$msrc $dst" |
| fi |
| |
| if [ x"$msrc" = x ] |
| then |
| echo "install: no destination specified" |
| exit 1 |
| fi |
| |
| for srcarg in $msrc; do |
| |
| if [ x"$dir_arg" != x ]; then |
| |
| dstarg="$srcarg" |
| else |
| dstarg="$dst" |
| |
| # Waiting for this to be detected by the "$instcmd $srcarg $dsttmp" command |
| # might cause directories to be created, which would be especially bad |
| # if $src (and thus $dsttmp) contains '*'. |
| |
| if [ -f "$srcarg" ] |
| then |
| doinst="$instcmd" |
| elif [ -d "$srcarg" ] |
| then |
| echo "install: $srcarg: not a regular file" |
| exit 1 |
| elif [ "$srcarg" = "/dev/null" ] |
| then |
| doinst="$cpprog" |
| else |
| echo "install: $srcarg does not exist" |
| exit 1 |
| fi |
| |
| # If destination is a directory, append the input filename; if your system |
| # does not like double slashes in filenames, you may need to add some logic |
| |
| if [ -d "$dstarg" ] |
| then |
| dstarg="$dstarg"/`basename "$srcarg"` |
| fi |
| fi |
| |
| ## this sed command emulates the dirname command |
| dstdir=`echo "$dstarg" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` |
| |
| # Make sure that the destination directory exists. |
| # this part is taken from Noah Friedman's mkinstalldirs script |
| |
| # Skip lots of stat calls in the usual case. |
| if [ ! -d "$dstdir" ]; then |
| defaultIFS=' |
| ' |
| IFS="${IFS-${defaultIFS}}" |
| |
| oIFS="${IFS}" |
| # Some sh's can't handle IFS=/ for some reason. |
| IFS='%' |
| set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` |
| IFS="${oIFS}" |
| |
| pathcomp='' |
| |
| while [ $# -ne 0 ] ; do |
| pathcomp="${pathcomp}${1}" |
| shift |
| |
| if [ ! -d "${pathcomp}" ] ; |
| then |
| $doit $mkdirprog "${pathcomp}" |
| if [ x"$chowncmd" != x ]; then $doit $chowncmd "${pathcomp}"; else true ; fi && |
| if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "${pathcomp}"; else true ; fi && |
| if [ x"$pathcompchmodcmd" != x ]; then $doit $pathcompchmodcmd "${pathcomp}"; else true ; fi |
| |
| else |
| true |
| fi |
| |
| pathcomp="${pathcomp}/" |
| done |
| fi |
| |
| if [ x"$dir_arg" != x ] |
| then |
| if [ -d "$dstarg" ]; then |
| true |
| else |
| $doit $mkdirprog "$dstarg" && |
| |
| if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dstarg"; else true ; fi && |
| if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dstarg"; else true ; fi && |
| if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dstarg"; else true ; fi |
| fi |
| else |
| |
| if [ x"$dstisfile" = x ] |
| then |
| file=$srcarg |
| else |
| file=$dst |
| fi |
| |
| dstfile=`basename "$file"` |
| dstfinal="$dstdir/$dstfile" |
| |
| # Make a temp file name in the proper directory. |
| |
| dsttmp=$dstdir/#inst.$$# |
| |
| # Make a backup file name in the proper directory. |
| case x$suffixfmt in |
| *%*) suffix=`echo x | |
| $awkprog -v bname="$dstfinal" -v fmt="$suffixfmt" ' |
| { cnt = 0; |
| do { |
| sfx = sprintf(fmt, cnt++); |
| name = bname sfx; |
| } while (system("test -f " name) == 0); |
| print sfx; }' -`;; |
| x) ;; |
| *) suffix="$suffixfmt";; |
| esac |
| dstbackup="$dstfinal$suffix" |
| |
| # Move or copy the file name to the temp name |
| |
| $doit $doinst $srcarg "$dsttmp" && |
| |
| trap "rm -f ${dsttmp}" 0 && |
| |
| # and set any options; do chmod last to preserve setuid bits |
| |
| # If any of these fail, we abort the whole thing. If we want to |
| # ignore errors from any of these, just make sure not to ignore |
| # errors from the above "$doit $instcmd $src $dsttmp" command. |
| |
| if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else true;fi && |
| if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else true;fi && |
| if [ x"$stripcmd" != x ]; then $doit $stripcmd $stripflags "$dsttmp"; else true;fi && |
| if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else true;fi && |
| |
| # Now rename the file to the real destination. |
| |
| if [ x"$suffix" != x ] && [ -f "$dstfinal" ] |
| then |
| $doit $mvcmd "$dstfinal" "$dstbackup" |
| else |
| $doit $rmcmd -f "$dstfinal" |
| fi && |
| $doit $mvcmd "$dsttmp" "$dstfinal" |
| fi |
| |
| done && |
| |
| |
| exit 0 |
