drivers/scsi/NCR_D700.c - pub/scm/linux/kernel/git/wtarreau/linux-2.4 - Git at Google

 /* -*- mode: c; c-basic-offset: 8 -*- */

 /* NCR Dual 700 MCA SCSI Driver
  *
  * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
 **-----------------------------------------------------------------------------
 **
 **  This program is free software; you can redistribute it and/or modify
 **  it under the terms of the GNU General Public License as published by
 **  the Free Software Foundation; either version 2 of the License, or
 **  (at your option) any later version.
 **
 **  This program is distributed in the hope that it will be useful,
 **  but WITHOUT ANY WARRANTY; without even the implied warranty of
 **  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 **  GNU General Public License for more details.
 **
 **  You should have received a copy of the GNU General Public License
 **  along with this program; if not, write to the Free Software
 **  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 **
 **-----------------------------------------------------------------------------
  */

 /* Notes:
  *
  * Most of the work is done in the chip specific module, 53c700.o
  *
  * TODO List:
  *
  * 1. Extract the SCSI ID from the voyager CMOS table (necessary to
  *    support multi-host environments.
  *
  * */


 /* CHANGELOG
  *
  * Version 2.2
  *
  * Added mca_set_adapter_name().
  *
  * Version 2.1
  *
  * Modularise the driver into a Board piece (this file) and a chip
  * piece 53c700.[ch] and 53c700.scr, added module options.  You can
  * now specify the scsi id by the parameters
  *
  * NCR_D700=slot:<n> [siop:<n>] id:<n> ....
  *
  * They need to be comma separated if compiled into the kernel
  *
  * Version 2.0
  *
  * Initial implementation of TCQ (Tag Command Queueing).  TCQ is full
  * featured and uses the clock algorithm to keep track of outstanding
  * tags and guard against individual tag starvation.  Also fixed a bug
  * in all of the 1.x versions where the D700_data_residue() function
  * was returning results off by 32 bytes (and thus causing the same 32
  * bytes to be written twice corrupting the data block).  It turns out
  * the 53c700 only has a 6 bit DBC and DFIFO registers not 7 bit ones
  * like the 53c710 (The 710 is the only data manual still available,
  * which I'd been using to program the 700).
  *
  * Version 1.2
  *
  * Much improved message handling engine
  *
  * Version 1.1
  *
  * Add code to handle selection reasonably correctly.  By the time we
  * get the selection interrupt, we've already responded, but drop off the
  * bus and hope the selector will go away.
  *
  * Version 1.0:
  *
  *   Initial release.  Fully functional except for procfs and tag
  * command queueing.  Has only been tested on cards with 53c700-66
  * chips and only single ended. Features are
  *
  * 1. Synchronous data transfers to offset 8 (limit of 700-66) and
  *    100ns (10MHz) limit of SCSI-2
  *
  * 2. Disconnection and reselection
  *
  * Testing:
  *
  *  I've only really tested this with the 700-66 chip, but have done
  * soak tests in multi-device environments to verify that
  * disconnections and reselections are being processed correctly.
  * */

 #define NCR_D700_VERSION "2.2"

 #include <linux/config.h>
 #include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
 #include <linux/init.h>
 #include <linux/mca.h>
 #include <asm/dma.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/byteorder.h>
 #include <linux/blk.h>
 #include <linux/module.h>


 #include "scsi.h"
 #include "hosts.h"
 #include "constants.h"

 #include "53c700.h"
 #include "NCR_D700.h"

 #ifndef CONFIG_MCA
 #error "NCR_D700 driver only compiles for MCA"
 #endif

 #ifdef NCR_D700_DEBUG
 #define STATIC
 #else
 #define STATIC static
 #endif

 char *NCR_D700;			/* command line from insmod */

 MODULE_AUTHOR("James Bottomley");
 MODULE_DESCRIPTION("NCR Dual700 SCSI Driver");
 MODULE_LICENSE("GPL");
 MODULE_PARM(NCR_D700, "s");

 static __u8 __initdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
 	{ [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 };

 #ifdef MODULE
 #define ARG_SEP ' '
 #else
 #define ARG_SEP ','
 #endif

 static int __init
 param_setup(char *string)
 {
 	char *pos = string, *next;
 	int slot = -1, siop = -1;

 	while(pos != NULL && (next = strchr(pos, ':')) != NULL) {
 		int val = (int)simple_strtoul(++next, NULL, 0);

 		if(!strncmp(pos, "slot:", 5))
 			slot = val;
 		else if(!strncmp(pos, "siop:", 5))
 			siop = val;
 		else if(!strncmp(pos, "id:", 3)) {
 			if(slot == -1) {
 				printk(KERN_WARNING "NCR D700: Must specify slot for id parameter\n");
 			} else if(slot > MCA_MAX_SLOT_NR) {
 				printk(KERN_WARNING "NCR D700: Illegal slot %d for id %d\n", slot, val);
 			} else {
 				if(siop != 0 && siop != 1) {
 					id_array[slot*2] = val;
 					id_array[slot*2 + 1] =val;
 				} else {
 					id_array[slot*2 + siop] = val;
 				}
 			}
 		}
 		if((pos = strchr(pos, ARG_SEP)) != NULL)
 			pos++;
 	}
 	return 1;
 }

 #ifndef MODULE
 __setup("NCR_D700=", param_setup);
 #endif

 /* Detect a D700 card.  Note, because of the set up---the chips are
  * essentially connectecd to the MCA bus independently, it is easier
  * to set them up as two separate host adapters, rather than one
  * adapter with two channels */
 STATIC int __init
 D700_detect(Scsi_Host_Template *tpnt)
 {
 	int slot = 0;
 	int found = 0;
 	int differential;
 	int banner = 1;

 	if(!MCA_bus)
 		return 0;

 #ifdef MODULE
 	if(NCR_D700)
 		param_setup(NCR_D700);
 #endif

 	for(slot = 0; (slot = mca_find_adapter(NCR_D700_MCA_ID, slot)) != MCA_NOTFOUND; slot++) {
 		int irq, i;
 		int pos3j, pos3k, pos3a, pos3b, pos4;
 		__u32 base_addr, offset_addr;
 		struct Scsi_Host *host = NULL;

 		/* enable board interrupt */
 		pos4 = mca_read_pos(slot, 4);
 		pos4 |= 0x4;
 		mca_write_pos(slot, 4, pos4);

 		mca_write_pos(slot, 6, 9);
 		pos3j = mca_read_pos(slot, 3);
 		mca_write_pos(slot, 6, 10);
 		pos3k = mca_read_pos(slot, 3);
 		mca_write_pos(slot, 6, 0);
 		pos3a = mca_read_pos(slot, 3);
 		mca_write_pos(slot, 6, 1);
 		pos3b = mca_read_pos(slot, 3);

 		base_addr = ((pos3j << 8) | pos3k) & 0xfffffff0;
 		offset_addr = ((pos3a << 8) | pos3b) & 0xffffff70;

 		irq = (pos4 & 0x3) + 11;
 		if(irq >= 13)
 			irq++;
 		if(banner) {
 			printk(KERN_NOTICE "NCR D700: Driver Version " NCR_D700_VERSION "\n"
 			       "NCR D700:  Copyright (c) 2001 by James.Bottomley@HansenPartnership.com\n"
 			       "NCR D700:\n");
 			banner = 0;
 		}
 		printk(KERN_NOTICE "NCR D700: found in slot %d  irq = %d  I/O base = 0x%x\n", slot, irq, offset_addr);

 		tpnt->proc_name = "NCR_D700";

 		/*outb(BOARD_RESET, base_addr);*/

 		/* clear any pending interrupts */
 		(void)inb(base_addr + 0x08);
 		/* get modctl, used later for setting diff bits */
 		switch(differential = (inb(base_addr + 0x08) >> 6)) {
 		case 0x00:
 			/* only SIOP1 differential */
 			differential = 0x02;
 			break;
 		case 0x01:
 			/* Both SIOPs differential */
 			differential = 0x03;
 			break;
 		case 0x03:
 			/* No SIOPs differential */
 			differential = 0x00;
 			break;
 		default:
 			printk(KERN_ERR "D700: UNEXPECTED DIFFERENTIAL RESULT 0x%02x\n",
 			       differential);
 			differential = 0x00;
 			break;
 		}

 		/* plumb in both 700 chips */
 		for(i=0; i<2; i++) {
 			__u32 region = offset_addr | (0x80 * i);
 			struct NCR_700_Host_Parameters *hostdata =
 				kmalloc(sizeof(struct NCR_700_Host_Parameters),
 					GFP_KERNEL);
 			if(hostdata == NULL) {
 				printk(KERN_ERR "NCR D700: Failed to allocate host data for channel %d, detatching\n", i);
 				continue;
 			}
 			memset(hostdata, 0, sizeof(struct NCR_700_Host_Parameters));
 			if(request_region(region, 64, "NCR_D700") == NULL) {
 				printk(KERN_ERR "NCR D700: Failed to reserve IO region 0x%x\n", region);
 				kfree(hostdata);
 				continue;
 			}

 			/* Fill in the three required pieces of hostdata */
 			hostdata->base = region;
 			hostdata->differential = (((1<<i) & differential) != 0);
 			hostdata->clock = NCR_D700_CLOCK_MHZ;
 			/* and register the chip */
 			if((host = NCR_700_detect(tpnt, hostdata)) == NULL) {
 				kfree(hostdata);
 				release_region(host->base, 64);
 				continue;
 			}
 			host->irq = irq;
 			/* FIXME: Read this from SUS */
 			host->this_id = id_array[slot * 2 + i];
 			printk(KERN_NOTICE "NCR D700: SIOP%d, SCSI id is %d\n",
 			       i, host->this_id);
 			if(request_irq(irq, NCR_700_intr, SA_SHIRQ, "NCR_D700", host)) {
 				printk(KERN_ERR "NCR D700, channel %d: irq problem, detatching\n", i);
 				scsi_unregister(host);
 				NCR_700_release(host);
 				continue;
 			}
 			found++;
 			mca_set_adapter_name(slot, "NCR D700 SCSI Adapter (version " NCR_D700_VERSION ")");
 		}
 	}

 	return found;
 }


 STATIC int
 D700_release(struct Scsi_Host *host)
 {
 	struct D700_Host_Parameters *hostdata =
 		(struct D700_Host_Parameters *)host->hostdata[0];

 	NCR_700_release(host);
 	kfree(hostdata);
 	free_irq(host->irq, host);
 	release_region(host->base, 64);
 	return 1;
 }


 static Scsi_Host_Template driver_template = NCR_D700_SCSI;

 #include "scsi_module.c"
	/* -- mode: c; c-basic-offset: 8 -- */

	/* NCR Dual 700 MCA SCSI Driver
	*
	* Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
	**-----------------------------------------------------------------------------
	**
	** This program is free software; you can redistribute it and/or modify
	** it under the terms of the GNU General Public License as published by
	** the Free Software Foundation; either version 2 of the License, or
	** (at your option) any later version.
	**
	** This program is distributed in the hope that it will be useful,
	** but WITHOUT ANY WARRANTY; without even the implied warranty of
	** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	** GNU General Public License for more details.
	**
	** You should have received a copy of the GNU General Public License
	** along with this program; if not, write to the Free Software
	** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	**
	**-----------------------------------------------------------------------------
	*/

	/* Notes:
	*
	* Most of the work is done in the chip specific module, 53c700.o
	*
	* TODO List:
	*
	* 1. Extract the SCSI ID from the voyager CMOS table (necessary to
	* support multi-host environments.
	*
	* */


	/* CHANGELOG
	*
	* Version 2.2
	*
	* Added mca_set_adapter_name().
	*
	* Version 2.1
	*
	* Modularise the driver into a Board piece (this file) and a chip
	* piece 53c700.[ch] and 53c700.scr, added module options. You can
	* now specify the scsi id by the parameters
	*
	* NCR_D700=slot:<n> [siop:<n>] id:<n> ....
	*
	* They need to be comma separated if compiled into the kernel
	*
	* Version 2.0
	*
	* Initial implementation of TCQ (Tag Command Queueing). TCQ is full
	* featured and uses the clock algorithm to keep track of outstanding
	* tags and guard against individual tag starvation. Also fixed a bug
	* in all of the 1.x versions where the D700_data_residue() function
	* was returning results off by 32 bytes (and thus causing the same 32
	* bytes to be written twice corrupting the data block). It turns out
	* the 53c700 only has a 6 bit DBC and DFIFO registers not 7 bit ones
	* like the 53c710 (The 710 is the only data manual still available,
	* which I'd been using to program the 700).
	*
	* Version 1.2
	*
	* Much improved message handling engine
	*
	* Version 1.1
	*
	* Add code to handle selection reasonably correctly. By the time we
	* get the selection interrupt, we've already responded, but drop off the
	* bus and hope the selector will go away.
	*
	* Version 1.0:
	*
	* Initial release. Fully functional except for procfs and tag
	* command queueing. Has only been tested on cards with 53c700-66
	* chips and only single ended. Features are
	*
	* 1. Synchronous data transfers to offset 8 (limit of 700-66) and
	* 100ns (10MHz) limit of SCSI-2
	*
	* 2. Disconnection and reselection
	*
	* Testing:
	*
	* I've only really tested this with the 700-66 chip, but have done
	* soak tests in multi-device environments to verify that
	* disconnections and reselections are being processed correctly.
	* */

	#define NCR_D700_VERSION "2.2"

	#include <linux/config.h>
	#include <linux/version.h>
	#include <linux/kernel.h>
	#include <linux/types.h>
	#include <linux/string.h>
	#include <linux/spinlock.h>
	#include <linux/ioport.h>
	#include <linux/delay.h>
	#include <linux/sched.h>
	#include <linux/proc_fs.h>
	#include <linux/init.h>
	#include <linux/mca.h>
	#include <asm/dma.h>
	#include <asm/system.h>
	#include <asm/io.h>
	#include <asm/pgtable.h>
	#include <asm/byteorder.h>
	#include <linux/blk.h>
	#include <linux/module.h>


	#include "scsi.h"
	#include "hosts.h"
	#include "constants.h"

	#include "53c700.h"
	#include "NCR_D700.h"

	#ifndef CONFIG_MCA
	#error "NCR_D700 driver only compiles for MCA"
	#endif

	#ifdef NCR_D700_DEBUG
	#define STATIC
	#else
	#define STATIC static
	#endif

	char NCR_D700; / command line from insmod */

	MODULE_AUTHOR("James Bottomley");
	MODULE_DESCRIPTION("NCR Dual700 SCSI Driver");
	MODULE_LICENSE("GPL");
	MODULE_PARM(NCR_D700, "s");

	static __u8 __initdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
	{ [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 };

	#ifdef MODULE
	#define ARG_SEP ' '
	#else
	#define ARG_SEP ','
	#endif

	static int __init
	param_setup(char *string)
	{
	char pos = string, next;
	int slot = -1, siop = -1;

	while(pos != NULL && (next = strchr(pos, ':')) != NULL) {
	int val = (int)simple_strtoul(++next, NULL, 0);

	if(!strncmp(pos, "slot:", 5))
	slot = val;
	else if(!strncmp(pos, "siop:", 5))
	siop = val;
	else if(!strncmp(pos, "id:", 3)) {
	if(slot == -1) {
	printk(KERN_WARNING "NCR D700: Must specify slot for id parameter\n");
	} else if(slot > MCA_MAX_SLOT_NR) {
	printk(KERN_WARNING "NCR D700: Illegal slot %d for id %d\n", slot, val);
	} else {
	if(siop != 0 && siop != 1) {
	id_array[slot*2] = val;
	id_array[slot*2 + 1] =val;
	} else {
	id_array[slot*2 + siop] = val;
	}
	}
	}
	if((pos = strchr(pos, ARG_SEP)) != NULL)
	pos++;
	}
	return 1;
	}

	#ifndef MODULE
	__setup("NCR_D700=", param_setup);
	#endif

	/* Detect a D700 card. Note, because of the set up---the chips are
	* essentially connectecd to the MCA bus independently, it is easier
	* to set them up as two separate host adapters, rather than one
	* adapter with two channels */
	STATIC int __init
	D700_detect(Scsi_Host_Template *tpnt)
	{
	int slot = 0;
	int found = 0;
	int differential;
	int banner = 1;

	if(!MCA_bus)
	return 0;

	#ifdef MODULE
	if(NCR_D700)
	param_setup(NCR_D700);
	#endif

	for(slot = 0; (slot = mca_find_adapter(NCR_D700_MCA_ID, slot)) != MCA_NOTFOUND; slot++) {
	int irq, i;
	int pos3j, pos3k, pos3a, pos3b, pos4;
	__u32 base_addr, offset_addr;
	struct Scsi_Host *host = NULL;

	/* enable board interrupt */
	pos4 = mca_read_pos(slot, 4);
	pos4 \|= 0x4;
	mca_write_pos(slot, 4, pos4);

	mca_write_pos(slot, 6, 9);
	pos3j = mca_read_pos(slot, 3);
	mca_write_pos(slot, 6, 10);
	pos3k = mca_read_pos(slot, 3);
	mca_write_pos(slot, 6, 0);
	pos3a = mca_read_pos(slot, 3);
	mca_write_pos(slot, 6, 1);
	pos3b = mca_read_pos(slot, 3);

	base_addr = ((pos3j << 8) \| pos3k) & 0xfffffff0;
	offset_addr = ((pos3a << 8) \| pos3b) & 0xffffff70;

	irq = (pos4 & 0x3) + 11;
	if(irq >= 13)
	irq++;
	if(banner) {
	printk(KERN_NOTICE "NCR D700: Driver Version " NCR_D700_VERSION "\n"
	"NCR D700: Copyright (c) 2001 by James.Bottomley@HansenPartnership.com\n"
	"NCR D700:\n");
	banner = 0;
	}
	printk(KERN_NOTICE "NCR D700: found in slot %d irq = %d I/O base = 0x%x\n", slot, irq, offset_addr);

	tpnt->proc_name = "NCR_D700";

	/outb(BOARD_RESET, base_addr);/

	/* clear any pending interrupts */
	(void)inb(base_addr + 0x08);
	/* get modctl, used later for setting diff bits */
	switch(differential = (inb(base_addr + 0x08) >> 6)) {
	case 0x00:
	/* only SIOP1 differential */
	differential = 0x02;
	break;
	case 0x01:
	/* Both SIOPs differential */
	differential = 0x03;
	break;
	case 0x03:
	/* No SIOPs differential */
	differential = 0x00;
	break;
	default:
	printk(KERN_ERR "D700: UNEXPECTED DIFFERENTIAL RESULT 0x%02x\n",
	differential);
	differential = 0x00;
	break;
	}

	/* plumb in both 700 chips */
	for(i=0; i<2; i++) {
	__u32 region = offset_addr \| (0x80 * i);
	struct NCR_700_Host_Parameters *hostdata =
	kmalloc(sizeof(struct NCR_700_Host_Parameters),
	GFP_KERNEL);
	if(hostdata == NULL) {
	printk(KERN_ERR "NCR D700: Failed to allocate host data for channel %d, detatching\n", i);
	continue;
	}
	memset(hostdata, 0, sizeof(struct NCR_700_Host_Parameters));
	if(request_region(region, 64, "NCR_D700") == NULL) {
	printk(KERN_ERR "NCR D700: Failed to reserve IO region 0x%x\n", region);
	kfree(hostdata);
	continue;
	}

	/* Fill in the three required pieces of hostdata */
	hostdata->base = region;
	hostdata->differential = (((1<<i) & differential) != 0);
	hostdata->clock = NCR_D700_CLOCK_MHZ;
	/* and register the chip */
	if((host = NCR_700_detect(tpnt, hostdata)) == NULL) {
	kfree(hostdata);
	release_region(host->base, 64);
	continue;
	}
	host->irq = irq;
	/* FIXME: Read this from SUS */
	host->this_id = id_array[slot * 2 + i];
	printk(KERN_NOTICE "NCR D700: SIOP%d, SCSI id is %d\n",
	i, host->this_id);
	if(request_irq(irq, NCR_700_intr, SA_SHIRQ, "NCR_D700", host)) {
	printk(KERN_ERR "NCR D700, channel %d: irq problem, detatching\n", i);
	scsi_unregister(host);
	NCR_700_release(host);
	continue;
	}
	found++;
	mca_set_adapter_name(slot, "NCR D700 SCSI Adapter (version " NCR_D700_VERSION ")");
	}
	}

	return found;
	}


	STATIC int
	D700_release(struct Scsi_Host *host)
	{
	struct D700_Host_Parameters *hostdata =
	(struct D700_Host_Parameters *)host->hostdata[0];

	NCR_700_release(host);
	kfree(hostdata);
	free_irq(host->irq, host);
	release_region(host->base, 64);
	return 1;
	}


	static Scsi_Host_Template driver_template = NCR_D700_SCSI;

	#include "scsi_module.c"