| /* |
| * Standard PCI Hot Plug Driver |
| * |
| * Copyright (C) 1995,2001 Compaq Computer Corporation |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) |
| * Copyright (C) 2001 IBM Corp. |
| * Copyright (C) 2003-2004 Intel Corporation |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com> |
| * |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/vmalloc.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/pci.h> |
| #include <asm/system.h> |
| #include "shpchp.h" |
| |
| #ifdef DEBUG |
| #define DBG_K_TRACE_ENTRY ((unsigned int)0x00000001) /* On function entry */ |
| #define DBG_K_TRACE_EXIT ((unsigned int)0x00000002) /* On function exit */ |
| #define DBG_K_INFO ((unsigned int)0x00000004) /* Info messages */ |
| #define DBG_K_ERROR ((unsigned int)0x00000008) /* Error messages */ |
| #define DBG_K_TRACE (DBG_K_TRACE_ENTRY|DBG_K_TRACE_EXIT) |
| #define DBG_K_STANDARD (DBG_K_INFO|DBG_K_ERROR|DBG_K_TRACE) |
| /* Redefine this flagword to set debug level */ |
| #define DEBUG_LEVEL DBG_K_STANDARD |
| |
| #define DEFINE_DBG_BUFFER char __dbg_str_buf[256]; |
| |
| #define DBG_PRINT( dbg_flags, args... ) \ |
| do { \ |
| if ( DEBUG_LEVEL & ( dbg_flags ) ) \ |
| { \ |
| int len; \ |
| len = sprintf( __dbg_str_buf, "%s:%d: %s: ", \ |
| __FILE__, __LINE__, __FUNCTION__ ); \ |
| sprintf( __dbg_str_buf + len, args ); \ |
| printk( KERN_NOTICE "%s\n", __dbg_str_buf ); \ |
| } \ |
| } while (0) |
| |
| #define DBG_ENTER_ROUTINE DBG_PRINT (DBG_K_TRACE_ENTRY, "%s", "[Entry]"); |
| #define DBG_LEAVE_ROUTINE DBG_PRINT (DBG_K_TRACE_EXIT, "%s", "[Exit]"); |
| #else |
| #define DEFINE_DBG_BUFFER |
| #define DBG_ENTER_ROUTINE |
| #define DBG_LEAVE_ROUTINE |
| #endif /* DEBUG */ |
| |
| /* Slot Available Register I field definition */ |
| #define SLOT_33MHZ 0x0000001f |
| #define SLOT_66MHZ_PCIX 0x00001f00 |
| #define SLOT_100MHZ_PCIX 0x001f0000 |
| #define SLOT_133MHZ_PCIX 0x1f000000 |
| |
| /* Slot Available Register II field definition */ |
| #define SLOT_66MHZ 0x0000001f |
| #define SLOT_66MHZ_PCIX_266 0x00000f00 |
| #define SLOT_100MHZ_PCIX_266 0x0000f000 |
| #define SLOT_133MHZ_PCIX_266 0x000f0000 |
| #define SLOT_66MHZ_PCIX_533 0x00f00000 |
| #define SLOT_100MHZ_PCIX_533 0x0f000000 |
| #define SLOT_133MHZ_PCIX_533 0xf0000000 |
| |
| /* Secondary Bus Configuration Register */ |
| /* For PI = 1, Bits 0 to 2 have been encoded as follows to show current bus speed/mode */ |
| #define PCI_33MHZ 0x0 |
| #define PCI_66MHZ 0x1 |
| #define PCIX_66MHZ 0x2 |
| #define PCIX_100MHZ 0x3 |
| #define PCIX_133MHZ 0x4 |
| |
| /* For PI = 2, Bits 0 to 3 have been encoded as follows to show current bus speed/mode */ |
| #define PCI_33MHZ 0x0 |
| #define PCI_66MHZ 0x1 |
| #define PCIX_66MHZ 0x2 |
| #define PCIX_100MHZ 0x3 |
| #define PCIX_133MHZ 0x4 |
| #define PCIX_66MHZ_ECC 0x5 |
| #define PCIX_100MHZ_ECC 0x6 |
| #define PCIX_133MHZ_ECC 0x7 |
| #define PCIX_66MHZ_266 0x9 |
| #define PCIX_100MHZ_266 0x0a |
| #define PCIX_133MHZ_266 0x0b |
| #define PCIX_66MHZ_533 0x11 |
| #define PCIX_100MHZ_533 0x12 |
| #define PCIX_133MHZ_533 0x13 |
| |
| /* Slot Configuration */ |
| #define SLOT_NUM 0x0000001F |
| #define FIRST_DEV_NUM 0x00001F00 |
| #define PSN 0x07FF0000 |
| #define UPDOWN 0x20000000 |
| #define MRLSENSOR 0x40000000 |
| #define ATTN_BUTTON 0x80000000 |
| |
| /* Slot Status Field Definitions */ |
| /* Slot State */ |
| #define PWR_ONLY 0x0001 |
| #define ENABLED 0x0002 |
| #define DISABLED 0x0003 |
| |
| /* Power Indicator State */ |
| #define PWR_LED_ON 0x0004 |
| #define PWR_LED_BLINK 0x0008 |
| #define PWR_LED_OFF 0x000c |
| |
| /* Attention Indicator State */ |
| #define ATTEN_LED_ON 0x0010 |
| #define ATTEN_LED_BLINK 0x0020 |
| #define ATTEN_LED_OFF 0x0030 |
| |
| /* Power Fault */ |
| #define pwr_fault 0x0040 |
| |
| /* Attention Button */ |
| #define ATTEN_BUTTON 0x0080 |
| |
| /* MRL Sensor */ |
| #define MRL_SENSOR 0x0100 |
| |
| /* 66 MHz Capable */ |
| #define IS_66MHZ_CAP 0x0200 |
| |
| /* PRSNT1#/PRSNT2# */ |
| #define SLOT_EMP 0x0c00 |
| |
| /* PCI-X Capability */ |
| #define NON_PCIX 0x0000 |
| #define PCIX_66 0x1000 |
| #define PCIX_133 0x3000 |
| #define PCIX_266 0x4000 /* For PI = 2 only */ |
| #define PCIX_533 0x5000 /* For PI = 2 only */ |
| |
| /* SHPC 'write' operations/commands */ |
| |
| /* Slot operation - 0x00h to 0x3Fh */ |
| |
| #define NO_CHANGE 0x00 |
| |
| /* Slot state - Bits 0 & 1 of controller command register */ |
| #define SET_SLOT_PWR 0x01 |
| #define SET_SLOT_ENABLE 0x02 |
| #define SET_SLOT_DISABLE 0x03 |
| |
| /* Power indicator state - Bits 2 & 3 of controller command register*/ |
| #define SET_PWR_ON 0x04 |
| #define SET_PWR_BLINK 0x08 |
| #define SET_PWR_OFF 0x0C |
| |
| /* Attention indicator state - Bits 4 & 5 of controller command register*/ |
| #define SET_ATTN_ON 0x010 |
| #define SET_ATTN_BLINK 0x020 |
| #define SET_ATTN_OFF 0x030 |
| |
| /* Set bus speed/mode A - 0x40h to 0x47h */ |
| #define SETA_PCI_33MHZ 0x40 |
| #define SETA_PCI_66MHZ 0x41 |
| #define SETA_PCIX_66MHZ 0x42 |
| #define SETA_PCIX_100MHZ 0x43 |
| #define SETA_PCIX_133MHZ 0x44 |
| #define RESERV_1 0x45 |
| #define RESERV_2 0x46 |
| #define RESERV_3 0x47 |
| |
| /* Set bus speed/mode B - 0x50h to 0x5fh */ |
| #define SETB_PCI_33MHZ 0x50 |
| #define SETB_PCI_66MHZ 0x51 |
| #define SETB_PCIX_66MHZ_PM 0x52 |
| #define SETB_PCIX_100MHZ_PM 0x53 |
| #define SETB_PCIX_133MHZ_PM 0x54 |
| #define SETB_PCIX_66MHZ_EM 0x55 |
| #define SETB_PCIX_100MHZ_EM 0x56 |
| #define SETB_PCIX_133MHZ_EM 0x57 |
| #define SETB_PCIX_66MHZ_266 0x58 |
| #define SETB_PCIX_100MHZ_266 0x59 |
| #define SETB_PCIX_133MHZ_266 0x5a |
| #define SETB_PCIX_66MHZ_533 0x5b |
| #define SETB_PCIX_100MHZ_533 0x5c |
| #define SETB_PCIX_133MHZ_533 0x5d |
| |
| /* Power-on all slots - 0x48h */ |
| #define SET_PWR_ON_ALL 0x48 |
| |
| /* Enable all slots - 0x49h */ |
| #define SET_ENABLE_ALL 0x49 |
| |
| /* SHPC controller command error code */ |
| #define SWITCH_OPEN 0x1 |
| #define INVALID_CMD 0x2 |
| #define INVALID_SPEED_MODE 0x4 |
| |
| /* For accessing SHPC Working Register Set */ |
| #define DWORD_SELECT 0x2 |
| #define DWORD_DATA 0x4 |
| #define BASE_OFFSET 0x0 |
| |
| /* Field Offset in Logical Slot Register - byte boundary */ |
| #define SLOT_EVENT_LATCH 0x2 |
| #define SLOT_SERR_INT_MASK 0x3 |
| |
| static spinlock_t hpc_event_lock; |
| |
| DEFINE_DBG_BUFFER /* Debug string buffer for entire HPC defined here */ |
| static struct php_ctlr_state_s *php_ctlr_list_head = 0; /* HPC state linked list */ |
| static int ctlr_seq_num = 0; /* Controller sequenc # */ |
| |
| static spinlock_t list_lock; |
| |
| static void shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs); |
| |
| static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds); |
| |
| /* This is the interrupt polling timeout function. */ |
| static void int_poll_timeout(unsigned long lphp_ctlr) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *)lphp_ctlr; |
| |
| DBG_ENTER_ROUTINE |
| |
| if ( !php_ctlr ) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return; |
| } |
| |
| /* Poll for interrupt events. regs == NULL => polling */ |
| shpc_isr( 0, (void *)php_ctlr, NULL ); |
| |
| init_timer(&php_ctlr->int_poll_timer); |
| if (!shpchp_poll_time) |
| shpchp_poll_time = 2; /* reset timer to poll in 2 secs if user doesn't specify at module installation*/ |
| |
| start_int_poll_timer(php_ctlr, shpchp_poll_time); |
| |
| return; |
| } |
| |
| /* This function starts the interrupt polling timer. */ |
| static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds) |
| { |
| if (!php_ctlr) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return; |
| } |
| |
| if ( ( seconds <= 0 ) || ( seconds > 60 ) ) |
| seconds = 2; /* Clamp to sane value */ |
| |
| php_ctlr->int_poll_timer.function = &int_poll_timeout; |
| php_ctlr->int_poll_timer.data = (unsigned long)php_ctlr; /* Instance data */ |
| php_ctlr->int_poll_timer.expires = jiffies + seconds * HZ; |
| add_timer(&php_ctlr->int_poll_timer); |
| |
| return; |
| } |
| |
| static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u16 cmd_status; |
| int retval = 0; |
| u16 temp_word; |
| int i; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!php_ctlr) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| for (i = 0; i < 10; i++) { |
| cmd_status = readw(php_ctlr->creg + CMD_STATUS); |
| |
| if (!(cmd_status & 0x1)) |
| break; |
| /* Check every 0.1 sec for a total of 1 sec*/ |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule_timeout(HZ/10); |
| } |
| |
| cmd_status = readw(php_ctlr->creg + CMD_STATUS); |
| |
| if (cmd_status & 0x1) { |
| /* After 1 sec and and the controller is still busy */ |
| err("%s : Controller is still busy after 1 sec.\n", __FUNCTION__); |
| return -1; |
| } |
| |
| ++t_slot; |
| temp_word = (t_slot << 8) | (cmd & 0xFF); |
| dbg("%s : t_slot %x cmd %x\n", __FUNCTION__, t_slot, cmd); |
| |
| /* To make sure the Controller Busy bit is 0 before we send out the |
| * command. |
| */ |
| writew(temp_word, php_ctlr->creg + CMD); |
| dbg("%s : temp_word written %x\n", __FUNCTION__, temp_word); |
| |
| DBG_LEAVE_ROUTINE |
| return retval; |
| } |
| |
| static int hpc_check_cmd_status(struct controller *ctrl) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; |
| u16 cmd_status; |
| int retval = 0; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| cmd_status = readw(php_ctlr->creg + CMD_STATUS) & 0x000F; |
| |
| switch (cmd_status >> 1) { |
| case 0: |
| retval = 0; |
| break; |
| case 1: |
| retval = SWITCH_OPEN; |
| err("%s: Switch opened!\n", __FUNCTION__); |
| break; |
| case 2: |
| retval = INVALID_CMD; |
| err("%s: Invalid HPC command!\n", __FUNCTION__); |
| break; |
| case 4: |
| retval = INVALID_SPEED_MODE; |
| err("%s: Invalid bus speed/mode!\n", __FUNCTION__); |
| break; |
| default: |
| retval = cmd_status; |
| } |
| |
| DBG_LEAVE_ROUTINE |
| return retval; |
| } |
| |
| |
| static int hpc_get_attention_status(struct slot *slot, u8 *status) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u32 slot_reg; |
| u16 slot_status; |
| u8 atten_led_state; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| slot_status = (u16) slot_reg; |
| atten_led_state = (slot_status & 0x0030) >> 4; |
| |
| switch (atten_led_state) { |
| case 0: |
| *status = 0xFF; /* Reserved */ |
| break; |
| case 1: |
| *status = 1; /* On */ |
| break; |
| case 2: |
| *status = 2; /* Blink */ |
| break; |
| case 3: |
| *status = 0; /* Off */ |
| break; |
| default: |
| *status = 0xFF; |
| break; |
| } |
| |
| DBG_LEAVE_ROUTINE |
| return 0; |
| } |
| |
| static int hpc_get_power_status(struct slot * slot, u8 *status) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u32 slot_reg; |
| u16 slot_status; |
| u8 slot_state; |
| int retval = 0; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| slot_status = (u16) slot_reg; |
| slot_state = (slot_status & 0x0003); |
| |
| switch (slot_state) { |
| case 0: |
| *status = 0xFF; |
| break; |
| case 1: |
| *status = 2; /* Powered only */ |
| break; |
| case 2: |
| *status = 1; /* Enabled */ |
| break; |
| case 3: |
| *status = 0; /* Disabled */ |
| break; |
| default: |
| *status = 0xFF; |
| break; |
| } |
| |
| DBG_LEAVE_ROUTINE |
| return retval; |
| } |
| |
| |
| static int hpc_get_latch_status(struct slot *slot, u8 *status) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u32 slot_reg; |
| u16 slot_status; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| slot_status = (u16)slot_reg; |
| |
| *status = ((slot_status & 0x0100) == 0) ? 0 : 1; /* 0 -> close; 1 -> open */ |
| |
| DBG_LEAVE_ROUTINE |
| return 0; |
| } |
| |
| static int hpc_get_adapter_status(struct slot *slot, u8 *status) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u32 slot_reg; |
| u16 slot_status; |
| u8 card_state; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| slot_status = (u16)slot_reg; |
| card_state = (u8)((slot_status & 0x0C00) >> 10); |
| *status = (card_state != 0x3) ? 1 : 0; |
| |
| DBG_LEAVE_ROUTINE |
| return 0; |
| } |
| |
| static int hpc_get_prog_int(struct slot *slot, u8 *prog_int) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| *prog_int = readb(php_ctlr->creg + PROG_INTERFACE); |
| |
| DBG_LEAVE_ROUTINE |
| return 0; |
| } |
| |
| static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u32 slot_reg; |
| u16 slot_status, sec_bus_status; |
| u8 m66_cap, pcix_cap, pi; |
| int retval = 0; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| if (slot->hp_slot >= php_ctlr->num_slots) { |
| err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| pi = readb(php_ctlr->creg + PROG_INTERFACE); |
| slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| dbg("%s: pi = %d, slot_reg = %x\n", __FUNCTION__, pi, slot_reg); |
| slot_status = (u16) slot_reg; |
| dbg("%s: slot_status = %x\n", __FUNCTION__, slot_status); |
| sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG); |
| |
| pcix_cap = (u8) ((slot_status & 0x3000) >> 12); |
| dbg("%s: pcix_cap = %x\n", __FUNCTION__, pcix_cap); |
| m66_cap = (u8) ((slot_status & 0x0200) >> 9); |
| dbg("%s: m66_cap = %x\n", __FUNCTION__, m66_cap); |
| |
| if (pi == 2) { |
| switch (pcix_cap) { |
| case 0: |
| *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; |
| break; |
| case 1: |
| *value = PCI_SPEED_66MHz_PCIX; |
| break; |
| case 3: |
| *value = PCI_SPEED_133MHz_PCIX; |
| break; |
| case 4: |
| *value = PCI_SPEED_133MHz_PCIX_266; |
| break; |
| case 5: |
| *value = PCI_SPEED_133MHz_PCIX_533; |
| break; |
| case 2: /* Reserved */ |
| default: |
| *value = PCI_SPEED_UNKNOWN; |
| retval = -ENODEV; |
| break; |
| } |
| } else { |
| switch (pcix_cap) { |
| case 0: |
| *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; |
| break; |
| case 1: |
| *value = PCI_SPEED_66MHz_PCIX; |
| break; |
| case 3: |
| *value = PCI_SPEED_133MHz_PCIX; |
| break; |
| case 2: /* Reserved */ |
| default: |
| *value = PCI_SPEED_UNKNOWN; |
| retval = -ENODEV; |
| break; |
| } |
| } |
| |
| dbg("Adapter speed = %d\n", *value); |
| |
| DBG_LEAVE_ROUTINE |
| return retval; |
| } |
| |
| static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u16 sec_bus_status; |
| u8 pi; |
| int retval = 0; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| pi = readb(php_ctlr->creg + PROG_INTERFACE); |
| sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG); |
| |
| if (pi == 2) { |
| *mode = (sec_bus_status & 0x0100) >> 7; |
| } else { |
| retval = -1; |
| } |
| |
| dbg("Mode 1 ECC cap = %d\n", *mode); |
| |
| DBG_LEAVE_ROUTINE |
| return retval; |
| } |
| |
| static int hpc_query_power_fault(struct slot * slot) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u32 slot_reg; |
| u16 slot_status; |
| u8 pwr_fault_state, status; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); |
| slot_status = (u16) slot_reg; |
| pwr_fault_state = (slot_status & 0x0040) >> 7; |
| status = (pwr_fault_state == 1) ? 0 : 1; |
| |
| DBG_LEAVE_ROUTINE |
| /* Note: Logic 0 => fault */ |
| return status; |
| } |
| |
| static int hpc_set_attention_status(struct slot *slot, u8 value) |
| { |
| struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u8 slot_cmd = 0; |
| int rc = 0; |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| if (slot->hp_slot >= php_ctlr->num_slots) { |
| err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| switch (value) { |
| case 0 : |
| slot_cmd = 0x30; /* OFF */ |
| break; |
| case 1: |
| slot_cmd = 0x10; /* ON */ |
| break; |
| case 2: |
| slot_cmd = 0x20; /* BLINK */ |
| break; |
| default: |
| return -1; |
| } |
| |
| shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| |
| return rc; |
| } |
| |
| |
| static void hpc_set_green_led_on(struct slot *slot) |
| { |
| struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u8 slot_cmd; |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return ; |
| } |
| |
| if (slot->hp_slot >= php_ctlr->num_slots) { |
| err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| return ; |
| } |
| |
| slot_cmd = 0x04; |
| |
| shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| |
| return; |
| } |
| |
| static void hpc_set_green_led_off(struct slot *slot) |
| { |
| struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u8 slot_cmd; |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return ; |
| } |
| |
| if (slot->hp_slot >= php_ctlr->num_slots) { |
| err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| return ; |
| } |
| |
| slot_cmd = 0x0C; |
| |
| shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| |
| return; |
| } |
| |
| static void hpc_set_green_led_blink(struct slot *slot) |
| { |
| struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u8 slot_cmd; |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return ; |
| } |
| |
| if (slot->hp_slot >= php_ctlr->num_slots) { |
| err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| return ; |
| } |
| |
| slot_cmd = 0x08; |
| |
| shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| |
| return; |
| } |
| |
| int shpc_get_ctlr_slot_config(struct controller *ctrl, |
| int *num_ctlr_slots, /* number of slots in this HPC */ |
| int *first_device_num, /* PCI dev num of the first slot in this SHPC */ |
| int *physical_slot_num, /* phy slot num of the first slot in this SHPC */ |
| int *updown, /* physical_slot_num increament: 1 or -1 */ |
| int *flags) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| *first_device_num = php_ctlr->slot_device_offset; /* Obtained in shpc_init() */ |
| *num_ctlr_slots = php_ctlr->num_slots; /* Obtained in shpc_init() */ |
| |
| *physical_slot_num = (readl(php_ctlr->creg + SLOT_CONFIG) & PSN) >> 16; |
| dbg("%s: physical_slot_num = %x\n", __FUNCTION__, *physical_slot_num); |
| *updown = ((readl(php_ctlr->creg + SLOT_CONFIG) & UPDOWN ) >> 29) ? 1 : -1; |
| |
| DBG_LEAVE_ROUTINE |
| return 0; |
| } |
| |
| static void hpc_release_ctlr(struct controller *ctrl) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; |
| struct php_ctlr_state_s *p, *p_prev; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return ; |
| } |
| |
| if (shpchp_poll_mode) { |
| del_timer(&php_ctlr->int_poll_timer); |
| } else { |
| if (php_ctlr->irq) { |
| free_irq(php_ctlr->irq, ctrl); |
| php_ctlr->irq = 0; |
| } |
| } |
| if (php_ctlr->pci_dev) { |
| dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__); |
| iounmap(php_ctlr->creg); |
| release_mem_region(pci_resource_start(php_ctlr->pci_dev, 0), pci_resource_len(php_ctlr->pci_dev, 0)); |
| dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__); |
| php_ctlr->pci_dev = 0; |
| } |
| |
| spin_lock(&list_lock); |
| p = php_ctlr_list_head; |
| p_prev = NULL; |
| while (p) { |
| if (p == php_ctlr) { |
| if (p_prev) |
| p_prev->pnext = p->pnext; |
| else |
| php_ctlr_list_head = p->pnext; |
| break; |
| } else { |
| p_prev = p; |
| p = p->pnext; |
| } |
| } |
| spin_unlock(&list_lock); |
| |
| kfree(php_ctlr); |
| |
| DBG_LEAVE_ROUTINE |
| |
| } |
| |
| static int hpc_power_on_slot(struct slot * slot) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u8 slot_cmd; |
| int retval = 0; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| if (slot->hp_slot >= php_ctlr->num_slots) { |
| err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| return -1; |
| } |
| slot_cmd = 0x01; |
| |
| retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| |
| if (retval) { |
| err("%s: Write command failed!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| DBG_LEAVE_ROUTINE |
| |
| return retval; |
| } |
| |
| static int hpc_slot_enable(struct slot * slot) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u8 slot_cmd; |
| int retval = 0; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| if (slot->hp_slot >= php_ctlr->num_slots) { |
| err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| return -1; |
| } |
| /* 3A => Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */ |
| slot_cmd = 0x3A; |
| |
| retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| |
| if (retval) { |
| err("%s: Write command failed!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| DBG_LEAVE_ROUTINE |
| return retval; |
| } |
| |
| static int hpc_slot_disable(struct slot * slot) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| u8 slot_cmd; |
| int retval = 0; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| if (slot->hp_slot >= php_ctlr->num_slots) { |
| err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| /* 1F => Slot - Disable, Power Indicator - Off, Attention Indicator - On */ |
| slot_cmd = 0x1F; |
| |
| retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd); |
| |
| if (retval) { |
| err("%s: Write command failed!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| DBG_LEAVE_ROUTINE |
| return retval; |
| } |
| |
| static int hpc_enable_all_slots( struct slot *slot ) |
| { |
| int retval = 0; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| retval = shpc_write_cmd(slot, 0, SET_ENABLE_ALL); |
| if (retval) { |
| err("%s: Write command failed!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| DBG_LEAVE_ROUTINE |
| |
| return retval; |
| } |
| |
| static int hpc_pwr_on_all_slots(struct slot *slot) |
| { |
| int retval = 0; |
| |
| DBG_ENTER_ROUTINE |
| |
| retval = shpc_write_cmd(slot, 0, SET_PWR_ON_ALL); |
| |
| if (retval) { |
| err("%s: Write command failed!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| DBG_LEAVE_ROUTINE |
| return retval; |
| } |
| |
| static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) |
| { |
| u8 slot_cmd; |
| u8 pi; |
| int retval = 0; |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| pi = readb(php_ctlr->creg + PROG_INTERFACE); |
| |
| if (pi == 1) { |
| switch (value) { |
| case 0: |
| slot_cmd = SETA_PCI_33MHZ; |
| break; |
| case 1: |
| slot_cmd = SETA_PCI_66MHZ; |
| break; |
| case 2: |
| slot_cmd = SETA_PCIX_66MHZ; |
| break; |
| case 3: |
| slot_cmd = SETA_PCIX_100MHZ; |
| break; |
| case 4: |
| slot_cmd = SETA_PCIX_133MHZ; |
| break; |
| default: |
| slot_cmd = PCI_SPEED_UNKNOWN; |
| retval = -ENODEV; |
| return retval; |
| } |
| } else { |
| switch (value) { |
| case 0: |
| slot_cmd = SETB_PCI_33MHZ; |
| break; |
| case 1: |
| slot_cmd = SETB_PCI_66MHZ; |
| break; |
| case 2: |
| slot_cmd = SETB_PCIX_66MHZ_PM; |
| break; |
| case 3: |
| slot_cmd = SETB_PCIX_100MHZ_PM; |
| break; |
| case 4: |
| slot_cmd = SETB_PCIX_133MHZ_PM; |
| break; |
| case 5: |
| slot_cmd = SETB_PCIX_66MHZ_EM; |
| break; |
| case 6: |
| slot_cmd = SETB_PCIX_100MHZ_EM; |
| break; |
| case 7: |
| slot_cmd = SETB_PCIX_133MHZ_EM; |
| break; |
| case 8: |
| slot_cmd = SETB_PCIX_66MHZ_266; |
| break; |
| case 9: |
| slot_cmd = SETB_PCIX_100MHZ_266; |
| break; |
| case 0xa: |
| slot_cmd = SETB_PCIX_133MHZ_266; |
| break; |
| case 0xb: |
| slot_cmd = SETB_PCIX_66MHZ_533; |
| break; |
| case 0xc: |
| slot_cmd = SETB_PCIX_100MHZ_533; |
| break; |
| case 0xd: |
| slot_cmd = SETB_PCIX_133MHZ_533; |
| break; |
| default: |
| slot_cmd = PCI_SPEED_UNKNOWN; |
| retval = -ENODEV; |
| return retval; |
| } |
| |
| } |
| retval = shpc_write_cmd(slot, 0, slot_cmd); |
| if (retval) { |
| err("%s: Write command failed!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| DBG_LEAVE_ROUTINE |
| return retval; |
| } |
| |
| static void shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) |
| { |
| struct controller *ctrl = NULL; |
| struct php_ctlr_state_s *php_ctlr; |
| u8 schedule_flag = 0; |
| u8 temp_byte; |
| u32 temp_dword, intr_loc, intr_loc2; |
| int hp_slot; |
| |
| if (!dev_id) |
| return; |
| |
| if (!shpchp_poll_mode) { |
| ctrl = (struct controller *)dev_id; |
| php_ctlr = ctrl->hpc_ctlr_handle; |
| } else { |
| php_ctlr = (struct php_ctlr_state_s *) dev_id; |
| ctrl = (struct controller *)php_ctlr->callback_instance_id; |
| } |
| |
| if (!ctrl) |
| return; |
| |
| if (!php_ctlr || !php_ctlr->creg) |
| return; |
| |
| /* Check to see if it was our interrupt */ |
| intr_loc = readl(php_ctlr->creg + INTR_LOC); |
| |
| if (!intr_loc) |
| return; |
| |
| dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc); |
| |
| if (!shpchp_poll_mode) { |
| /* Mask Global Interrupt Mask - see implementation note on p. 139 */ |
| /* of SHPC spec rev 1.0*/ |
| temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| dbg("%s: Before masking global interrupt, temp_dword = %x\n", |
| __FUNCTION__, temp_dword); |
| temp_dword |= 0x00000001; |
| dbg("%s: After masking global interrupt, temp_dword = %x\n", |
| __FUNCTION__, temp_dword); |
| writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); |
| |
| intr_loc2 = readl(php_ctlr->creg + INTR_LOC); |
| dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2); |
| } |
| |
| if (intr_loc & 0x0001) { |
| /* |
| * Command Complete Interrupt Pending |
| * RO only - clear by writing 0 to the Command Completion |
| * Detect bit in Controller SERR-INT register |
| */ |
| temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| dbg("%s: Before clearing CCIP, temp_dword = %x\n", |
| __FUNCTION__, temp_dword); |
| temp_dword &= 0xfffeffff; |
| dbg("%s: After clearing CCIP, temp_dword = %x\n", |
| __FUNCTION__, temp_dword); |
| writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); |
| |
| wake_up_interruptible(&ctrl->queue); |
| } |
| |
| if ((intr_loc = (intr_loc >> 1)) == 0) { |
| /* Unmask Global Interrupt Mask */ |
| temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| dbg("%s: 1-Before unmasking global interrupt, temp_dword = %x\n", |
| __FUNCTION__, temp_dword); |
| temp_dword &= 0xfffffffe; |
| dbg("%s: 1-After unmasking global interrupt, temp_dword = %x\n", |
| __FUNCTION__, temp_dword); |
| writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); |
| return; |
| } |
| |
| for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { |
| /* To find out which slot has interrupt pending */ |
| if ((intr_loc >> hp_slot) & 0x01) { |
| temp_dword = readl(php_ctlr->creg + SLOT1 + (4*hp_slot)); |
| dbg("%s: Slot %x with intr, temp_dword = %x\n", |
| __FUNCTION__, hp_slot, temp_dword); |
| temp_byte = (temp_dword >> 16) & 0xFF; |
| dbg("%s: Slot with intr, temp_byte = %x\n", |
| __FUNCTION__, temp_byte); |
| if ((php_ctlr->switch_change_callback) && (temp_byte & 0x08)) |
| schedule_flag += php_ctlr->switch_change_callback( |
| hp_slot, php_ctlr->callback_instance_id); |
| if ((php_ctlr->attention_button_callback) && (temp_byte & 0x04)) |
| schedule_flag += php_ctlr->attention_button_callback( |
| hp_slot, php_ctlr->callback_instance_id); |
| if ((php_ctlr->presence_change_callback) && (temp_byte & 0x01)) |
| schedule_flag += php_ctlr->presence_change_callback( |
| hp_slot , php_ctlr->callback_instance_id); |
| if ((php_ctlr->power_fault_callback) && (temp_byte & 0x12)) |
| schedule_flag += php_ctlr->power_fault_callback( |
| hp_slot, php_ctlr->callback_instance_id); |
| |
| /* Clear all slot events */ |
| temp_dword = 0xe01fffff; |
| dbg("%s: Clearing slot events, temp_dword = %x\n", |
| __FUNCTION__, temp_dword); |
| writel(temp_dword, php_ctlr->creg + SLOT1 + (4*hp_slot)); |
| |
| intr_loc2 = readl(php_ctlr->creg + INTR_LOC); |
| dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2); |
| } |
| } |
| |
| if (!shpchp_poll_mode) { |
| /* Unmask Global Interrupt Mask */ |
| temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| dbg("%s: 2-Before unmasking global interrupt, temp_dword = %x\n", |
| __FUNCTION__, temp_dword); |
| temp_dword &= 0xfffffffe; |
| dbg("%s: 2-After unmasking global interrupt, temp_dword = %x\n", |
| __FUNCTION__, temp_dword); |
| writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); |
| } |
| |
| return; |
| } |
| |
| static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; |
| int retval = 0; |
| u8 pi; |
| u32 slot_avail1, slot_avail2; |
| int slot_num; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| if (slot->hp_slot >= php_ctlr->num_slots) { |
| err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| pi = readb(php_ctlr->creg + PROG_INTERFACE); |
| slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1); |
| slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2); |
| |
| if (pi == 2) { |
| if ((slot_num = ((slot_avail2 & SLOT_133MHZ_PCIX_533) >> 27) ) != 0 ) |
| bus_speed = PCIX_133MHZ_533; |
| else if ((slot_num = ((slot_avail2 & SLOT_100MHZ_PCIX_533) >> 23) ) != 0 ) |
| bus_speed = PCIX_100MHZ_533; |
| else if ((slot_num = ((slot_avail2 & SLOT_66MHZ_PCIX_533) >> 19) ) != 0 ) |
| bus_speed = PCIX_66MHZ_533; |
| else if ((slot_num = ((slot_avail2 & SLOT_133MHZ_PCIX_266) >> 15) ) != 0 ) |
| bus_speed = PCIX_133MHZ_266; |
| else if ((slot_num = ((slot_avail2 & SLOT_100MHZ_PCIX_266) >> 11) ) != 0 ) |
| bus_speed = PCIX_100MHZ_266; |
| else if ((slot_num = ((slot_avail2 & SLOT_66MHZ_PCIX_266) >> 7) ) != 0 ) |
| bus_speed = PCIX_66MHZ_266; |
| else if ((slot_num = ((slot_avail1 & SLOT_133MHZ_PCIX) >> 23) ) != 0 ) |
| bus_speed = PCIX_133MHZ; |
| else if ((slot_num = ((slot_avail1 & SLOT_100MHZ_PCIX) >> 15) ) != 0 ) |
| bus_speed = PCIX_100MHZ; |
| else if ((slot_num = ((slot_avail1 & SLOT_66MHZ_PCIX) >> 7) ) != 0 ) |
| bus_speed = PCIX_66MHZ; |
| else if ((slot_num = (slot_avail2 & SLOT_66MHZ)) != 0 ) |
| bus_speed = PCI_66MHZ; |
| else if ((slot_num = (slot_avail1 & SLOT_33MHZ)) != 0 ) |
| bus_speed = PCI_33MHZ; |
| else bus_speed = PCI_SPEED_UNKNOWN; |
| } else { |
| if ((slot_num = ((slot_avail1 & SLOT_133MHZ_PCIX) >> 23) ) != 0 ) |
| bus_speed = PCIX_133MHZ; |
| else if ((slot_num = ((slot_avail1 & SLOT_100MHZ_PCIX) >> 15) ) != 0 ) |
| bus_speed = PCIX_100MHZ; |
| else if ((slot_num = ((slot_avail1 & SLOT_66MHZ_PCIX) >> 7) ) != 0 ) |
| bus_speed = PCIX_66MHZ; |
| else if ((slot_num = (slot_avail2 & SLOT_66MHZ)) != 0 ) |
| bus_speed = PCI_66MHZ; |
| else if ((slot_num = (slot_avail1 & SLOT_33MHZ)) != 0 ) |
| bus_speed = PCI_33MHZ; |
| else bus_speed = PCI_SPEED_UNKNOWN; |
| } |
| |
| *value = bus_speed; |
| dbg("Max bus speed = %d\n", bus_speed); |
| DBG_LEAVE_ROUTINE |
| return retval; |
| } |
| |
| static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) |
| { |
| struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; |
| enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; |
| u16 sec_bus_status; |
| int retval = 0; |
| u8 pi; |
| |
| DBG_ENTER_ROUTINE |
| |
| if (!slot->ctrl->hpc_ctlr_handle) { |
| err("%s: Invalid HPC controller handle!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| if (slot->hp_slot >= php_ctlr->num_slots) { |
| err("%s: Invalid HPC slot number!\n", __FUNCTION__); |
| return -1; |
| } |
| |
| pi = readb(php_ctlr->creg + PROG_INTERFACE); |
| sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG); |
| |
| if (pi == 2) { |
| switch (sec_bus_status & 0x000f) { |
| case 0: |
| bus_speed = PCI_SPEED_33MHz; |
| break; |
| case 1: |
| bus_speed = PCI_SPEED_66MHz; |
| break; |
| case 2: |
| bus_speed = PCI_SPEED_66MHz_PCIX; |
| break; |
| case 3: |
| bus_speed = PCI_SPEED_100MHz_PCIX; |
| break; |
| case 4: |
| bus_speed = PCI_SPEED_133MHz_PCIX; |
| break; |
| case 5: |
| bus_speed = PCI_SPEED_66MHz_PCIX_ECC; |
| break; |
| case 6: |
| bus_speed = PCI_SPEED_100MHz_PCIX_ECC; |
| break; |
| case 7: |
| bus_speed = PCI_SPEED_133MHz_PCIX_ECC; |
| break; |
| case 8: |
| bus_speed = PCI_SPEED_66MHz_PCIX_266; |
| break; |
| case 9: |
| bus_speed = PCI_SPEED_100MHz_PCIX_266; |
| break; |
| case 0xa: |
| bus_speed = PCI_SPEED_133MHz_PCIX_266; |
| break; |
| case 0xb: |
| bus_speed = PCI_SPEED_66MHz_PCIX_533; |
| break; |
| case 0xc: |
| bus_speed = PCI_SPEED_100MHz_PCIX_533; |
| break; |
| case 0xd: |
| bus_speed = PCI_SPEED_133MHz_PCIX_533; |
| break; |
| case 0xe: |
| case 0xf: |
| default: |
| bus_speed = PCI_SPEED_UNKNOWN; |
| break; |
| } |
| } else { |
| /* In the case where pi is undefined, default it to 1 */ |
| switch (sec_bus_status & 0x0007) { |
| case 0: |
| bus_speed = PCI_SPEED_33MHz; |
| break; |
| case 1: |
| bus_speed = PCI_SPEED_66MHz; |
| break; |
| case 2: |
| bus_speed = PCI_SPEED_66MHz_PCIX; |
| break; |
| case 3: |
| bus_speed = PCI_SPEED_100MHz_PCIX; |
| break; |
| case 4: |
| bus_speed = PCI_SPEED_133MHz_PCIX; |
| break; |
| case 5: |
| bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ |
| break; |
| case 6: |
| bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ |
| break; |
| case 7: |
| bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ |
| break; |
| default: |
| bus_speed = PCI_SPEED_UNKNOWN; |
| break; |
| } |
| } |
| *value = bus_speed; |
| dbg("Current bus speed = %d\n", bus_speed); |
| DBG_LEAVE_ROUTINE |
| return retval; |
| |
| } |
| |
| static struct hpc_ops shpchp_hpc_ops = { |
| .power_on_slot = hpc_power_on_slot, |
| .slot_enable = hpc_slot_enable, |
| .slot_disable = hpc_slot_disable, |
| .enable_all_slots = hpc_enable_all_slots, |
| .pwr_on_all_slots = hpc_pwr_on_all_slots, |
| .set_bus_speed_mode = hpc_set_bus_speed_mode, |
| .set_attention_status = hpc_set_attention_status, |
| .get_power_status = hpc_get_power_status, |
| .get_attention_status = hpc_get_attention_status, |
| .get_latch_status = hpc_get_latch_status, |
| .get_adapter_status = hpc_get_adapter_status, |
| |
| .get_max_bus_speed = hpc_get_max_bus_speed, |
| .get_cur_bus_speed = hpc_get_cur_bus_speed, |
| .get_adapter_speed = hpc_get_adapter_speed, |
| .get_mode1_ECC_cap = hpc_get_mode1_ECC_cap, |
| .get_prog_int = hpc_get_prog_int, |
| |
| .query_power_fault = hpc_query_power_fault, |
| .green_led_on = hpc_set_green_led_on, |
| .green_led_off = hpc_set_green_led_off, |
| .green_led_blink = hpc_set_green_led_blink, |
| |
| .release_ctlr = hpc_release_ctlr, |
| .check_cmd_status = hpc_check_cmd_status, |
| }; |
| |
| int shpc_init(struct controller * ctrl, |
| struct pci_dev * pdev, |
| php_intr_callback_t attention_button_callback, |
| php_intr_callback_t switch_change_callback, |
| php_intr_callback_t presence_change_callback, |
| php_intr_callback_t power_fault_callback) |
| { |
| struct php_ctlr_state_s *php_ctlr, *p; |
| void *instance_id = ctrl; |
| int rc; |
| u8 hp_slot; |
| static int first = 1; |
| u32 shpc_cap_offset, shpc_base_offset; |
| u32 tempdword, slot_reg; |
| u16 vendor_id, device_id; |
| u8 i; |
| |
| DBG_ENTER_ROUTINE |
| |
| spin_lock_init(&list_lock); |
| php_ctlr = (struct php_ctlr_state_s *) kmalloc(sizeof(struct php_ctlr_state_s), GFP_KERNEL); |
| |
| if (!php_ctlr) { /* allocate controller state data */ |
| err("%s: HPC controller memory allocation error!\n", __FUNCTION__); |
| goto abort; |
| } |
| |
| memset(php_ctlr, 0, sizeof(struct php_ctlr_state_s)); |
| |
| php_ctlr->pci_dev = pdev; /* save pci_dev in context */ |
| |
| rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id); |
| dbg("%s: Vendor ID: %x\n",__FUNCTION__, vendor_id); |
| if (rc) { |
| err("%s: Unable to read PCI COnfiguration data\n", __FUNCTION__); |
| goto abort_free_ctlr; |
| } |
| |
| rc = pci_read_config_word(pdev, PCI_DEVICE_ID, &device_id); |
| dbg("%s: Device ID: %x\n",__FUNCTION__, device_id); |
| if (rc) { |
| err("%s: Unable to read PCI COnfiguration data\n", __FUNCTION__); |
| goto abort_free_ctlr; |
| } |
| |
| if ((vendor_id == PCI_VENDOR_ID_AMD) || (device_id == PCI_DEVICE_ID_AMD_GOLAM_7450)) { |
| shpc_base_offset = 0; /* amd shpc driver doesn't use this; assume 0 */ |
| } else { |
| if ((shpc_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC)) == 0) { |
| err("%s : shpc_cap_offset == 0\n", __FUNCTION__); |
| goto abort_free_ctlr; |
| } |
| dbg("%s: shpc_cap_offset = %x\n", __FUNCTION__, shpc_cap_offset); |
| |
| rc = pci_write_config_byte(pdev, (u8)shpc_cap_offset + DWORD_SELECT , BASE_OFFSET); |
| if (rc) { |
| err("%s : pci_word_config_byte failed\n", __FUNCTION__); |
| goto abort_free_ctlr; |
| } |
| |
| rc = pci_read_config_dword(pdev, (u8)shpc_cap_offset + DWORD_DATA, &shpc_base_offset); |
| if (rc) { |
| err("%s : pci_read_config_dword failed\n", __FUNCTION__); |
| goto abort_free_ctlr; |
| } |
| |
| for (i = 0; i <= 14; i++) { |
| rc = pci_write_config_byte(pdev, (u8)shpc_cap_offset + DWORD_SELECT , i); |
| if (rc) { |
| err("%s : pci_word_config_byte failed\n", __FUNCTION__); |
| goto abort_free_ctlr; |
| } |
| |
| rc = pci_read_config_dword(pdev, (u8)shpc_cap_offset + DWORD_DATA, &tempdword); |
| if (rc) { |
| err("%s : pci_read_config_dword failed\n", __FUNCTION__); |
| goto abort_free_ctlr; |
| } |
| dbg("%s: offset %d: tempdword %x\n", __FUNCTION__,i, tempdword); |
| } |
| } |
| |
| if (first) { |
| spin_lock_init(&hpc_event_lock); |
| first = 0; |
| } |
| |
| dbg("pdev = %p: b:d:f:irq=0x%x:%x:%x:%x\n", pdev, pdev->bus->number, PCI_SLOT(pdev->devfn), |
| PCI_FUNC(pdev->devfn), pdev->irq); |
| for ( rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++) |
| if (pci_resource_len(pdev, rc) > 0) |
| dbg("pci resource[%d] start=0x%lx(len=0x%lx), shpc_base_offset %x\n", rc, |
| pci_resource_start(pdev, rc), pci_resource_len(pdev, rc), shpc_base_offset); |
| |
| info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, |
| pdev->subsystem_vendor, pdev->subsystem_device); |
| |
| if (!request_mem_region(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0), MY_NAME)) { |
| err("%s: cannot reserve MMIO region\n", __FUNCTION__); |
| goto abort_free_ctlr; |
| } |
| |
| php_ctlr->creg = (struct ctrl_reg *) |
| ioremap(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0)); |
| if (!php_ctlr->creg) { |
| err("%s: cannot remap MMIO region %lx @ %lx\n", __FUNCTION__, pci_resource_len(pdev, 0), |
| pci_resource_start(pdev, 0) + shpc_base_offset); |
| release_mem_region(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0)); |
| goto abort_free_ctlr; |
| } |
| dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg); |
| dbg("%s: physical addr %p\n", __FUNCTION__, (void*)pci_resource_start(pdev, 0)); |
| |
| init_MUTEX(&ctrl->crit_sect); |
| /* Ssetup wait queue */ |
| init_waitqueue_head(&ctrl->queue); |
| |
| /* Find the IRQ */ |
| php_ctlr->irq = pdev->irq; |
| dbg("HPC interrupt = %d\n", php_ctlr->irq); |
| |
| /* Save interrupt callback info */ |
| php_ctlr->attention_button_callback = attention_button_callback; |
| php_ctlr->switch_change_callback = switch_change_callback; |
| php_ctlr->presence_change_callback = presence_change_callback; |
| php_ctlr->power_fault_callback = power_fault_callback; |
| php_ctlr->callback_instance_id = instance_id; |
| |
| /* Return PCI Controller Info */ |
| php_ctlr->slot_device_offset = (readl(php_ctlr->creg + SLOT_CONFIG) & FIRST_DEV_NUM ) >> 8; |
| php_ctlr->num_slots = readl(php_ctlr->creg + SLOT_CONFIG) & SLOT_NUM; |
| dbg("%s: slot_device_offset %x\n", __FUNCTION__, php_ctlr->slot_device_offset); |
| dbg("%s: num_slots %x\n", __FUNCTION__, php_ctlr->num_slots); |
| |
| /* Mask Global Interrupt Mask & Command Complete Interrupt Mask */ |
| tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword); |
| tempdword = 0x0003000f; |
| writel(tempdword, php_ctlr->creg + SERR_INTR_ENABLE); |
| tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword); |
| |
| /* Mask the MRL sensor SERR Mask of individual slot in |
| * Slot SERR-INT Mask & clear all the existing event if any |
| */ |
| for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) { |
| slot_reg = readl(php_ctlr->creg + SLOT1 + 4*hp_slot ); |
| dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__, |
| hp_slot, slot_reg); |
| tempdword = 0xffffffff; |
| writel(tempdword, php_ctlr->creg + SLOT1 + (4*hp_slot)); |
| } |
| |
| if (shpchp_poll_mode) {/* Install interrupt polling code */ |
| /* Install and start the interrupt polling timer */ |
| init_timer(&php_ctlr->int_poll_timer); |
| start_int_poll_timer( php_ctlr, 10 ); /* start with 10 second delay */ |
| } else { |
| /* Installs the interrupt handler */ |
| rc = request_irq(php_ctlr->irq, shpc_isr, SA_SHIRQ, MY_NAME, (void *) ctrl); |
| dbg("%s: request_irq %d for hpc%d (returns %d)\n", __FUNCTION__, php_ctlr->irq, |
| ctlr_seq_num, rc); |
| if (rc) { |
| err("Can't get irq %d for the hotplug controller\n", php_ctlr->irq); |
| goto abort_free_ctlr; |
| } |
| } |
| dbg("%s: Before adding HPC to HPC list\n", __FUNCTION__); |
| |
| /* Add this HPC instance into the HPC list */ |
| spin_lock(&list_lock); |
| if (php_ctlr_list_head == 0) { |
| php_ctlr_list_head = php_ctlr; |
| p = php_ctlr_list_head; |
| p->pnext = 0; |
| } else { |
| p = php_ctlr_list_head; |
| |
| while (p->pnext) |
| p = p->pnext; |
| |
| p->pnext = php_ctlr; |
| } |
| spin_unlock(&list_lock); |
| |
| ctlr_seq_num++; |
| ctrl->hpc_ctlr_handle = php_ctlr; |
| ctrl->hpc_ops = &shpchp_hpc_ops; |
| for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) { |
| slot_reg = readl(php_ctlr->creg + SLOT1 + 4*hp_slot ); |
| dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__, |
| hp_slot, slot_reg); |
| tempdword = 0xe01fffff; |
| writel(tempdword, php_ctlr->creg + SLOT1 + (4*hp_slot)); |
| } |
| if (!shpchp_poll_mode) { |
| /* Unmask all general input interrupts and SERR */ |
| tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| tempdword = 0x0000000a; |
| writel(tempdword, php_ctlr->creg + SERR_INTR_ENABLE); |
| tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE); |
| dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword); |
| } |
| |
| dbg("%s: Leaving shpc_init\n", __FUNCTION__); |
| DBG_LEAVE_ROUTINE |
| return 0; |
| |
| /* We end up here for the many possible ways to fail this API. */ |
| abort_free_ctlr: |
| kfree(php_ctlr); |
| abort: |
| DBG_LEAVE_ROUTINE |
| return -1; |
| } |
