blob: cae9757f49c1265eccafbb0834141602095f7cd4 [file] [log] [blame]
libperf-counting(7)
===================
NAME
----
libperf-counting - counting interface
DESCRIPTION
-----------
The counting interface provides API to meassure and get count for specific perf events.
The following test tries to explain count on `counting.c` example.
It is by no means complete guide to counting, but shows libperf basic API for counting.
The `counting.c` comes with libbperf package and can be compiled and run like:
[source,bash]
--
$ gcc -o counting counting.c -lperf
$ sudo ./counting
count 176792, enabled 176944, run 176944
count 176242, enabled 176242, run 176242
--
It requires root access, because of the `PERF_COUNT_SW_CPU_CLOCK` event,
which is available only for root.
The `counting.c` example monitors two events on the current process and displays their count, in a nutshel it:
* creates events
* adds them to the event list
* opens and enables events through the event list
* does some workload
* disables events
* reads and displays event counts
* destroys the event list
The first thing you need to do before using libperf is to call init function:
[source,c]
--
8 static int libperf_print(enum libperf_print_level level,
9 const char *fmt, va_list ap)
10 {
11 return vfprintf(stderr, fmt, ap);
12 }
14 int main(int argc, char **argv)
15 {
...
35 libperf_init(libperf_print);
--
It will setup the library and sets function for debug output from library.
The `libperf_print` callback will receive any message with its debug level,
defined as:
[source,c]
--
enum libperf_print_level {
LIBPERF_ERR,
LIBPERF_WARN,
LIBPERF_INFO,
LIBPERF_DEBUG,
LIBPERF_DEBUG2,
LIBPERF_DEBUG3,
};
--
Once the setup is complete we start by defining specific events using the `struct perf_event_attr`.
We create software events for cpu and task:
[source,c]
--
20 struct perf_event_attr attr1 = {
21 .type = PERF_TYPE_SOFTWARE,
22 .config = PERF_COUNT_SW_CPU_CLOCK,
23 .read_format = PERF_FORMAT_TOTAL_TIME_ENABLED|PERF_FORMAT_TOTAL_TIME_RUNNING,
24 .disabled = 1,
25 };
26 struct perf_event_attr attr2 = {
27 .type = PERF_TYPE_SOFTWARE,
28 .config = PERF_COUNT_SW_TASK_CLOCK,
29 .read_format = PERF_FORMAT_TOTAL_TIME_ENABLED|PERF_FORMAT_TOTAL_TIME_RUNNING,
30 .disabled = 1,
31 };
--
The `read_format` setup tells perf to include timing details together with each count.
Next step is to prepare threads map.
In this case we will monitor current process, so we create threads map with single pid (0):
[source,c]
--
37 threads = perf_thread_map__new_dummy();
38 if (!threads) {
39 fprintf(stderr, "failed to create threads\n");
40 return -1;
41 }
42
43 perf_thread_map__set_pid(threads, 0, 0);
--
Now we create libperf's event list, which will serve as holder for the events we want:
[source,c]
--
45 evlist = perf_evlist__new();
46 if (!evlist) {
47 fprintf(stderr, "failed to create evlist\n");
48 goto out_threads;
49 }
--
We create libperf's events for the attributes we defined earlier and add them to the list:
[source,c]
--
51 evsel = perf_evsel__new(&attr1);
52 if (!evsel) {
53 fprintf(stderr, "failed to create evsel1\n");
54 goto out_evlist;
55 }
56
57 perf_evlist__add(evlist, evsel);
58
59 evsel = perf_evsel__new(&attr2);
60 if (!evsel) {
61 fprintf(stderr, "failed to create evsel2\n");
62 goto out_evlist;
63 }
64
65 perf_evlist__add(evlist, evsel);
--
Configure event list with the thread map and open events:
[source,c]
--
67 perf_evlist__set_maps(evlist, NULL, threads);
68
69 err = perf_evlist__open(evlist);
70 if (err) {
71 fprintf(stderr, "failed to open evsel\n");
72 goto out_evlist;
73 }
--
Both events are created as disabled (note the `disabled = 1` assignment above),
so we need to enable the whole list explicitely (both events).
From this moment events are counting and we can do our workload.
When we are done we disable the events list.
[source,c]
--
75 perf_evlist__enable(evlist);
76
77 while (count--);
78
79 perf_evlist__disable(evlist);
--
Now we need to get the counts from events, following code iterates throught the events list and read counts:
[source,c]
--
81 perf_evlist__for_each_evsel(evlist, evsel) {
82 perf_evsel__read(evsel, 0, 0, &counts);
83 fprintf(stdout, "count %llu, enabled %llu, run %llu\n",
84 counts.val, counts.ena, counts.run);
85 }
--
And finaly cleanup.
We close the whole events list (both events) and remove it together with the threads map:
[source,c]
--
87 perf_evlist__close(evlist);
88
89 out_evlist:
90 perf_evlist__delete(evlist);
91 out_threads:
92 perf_thread_map__put(threads);
93 return err;
94 }
--
REPORTING BUGS
--------------
Report bugs to <linux-perf-users@vger.kernel.org>.
LICENSE
-------
libperf is Free Software licensed under the GNU LGPL 2.1
RESOURCES
---------
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
SEE ALSO
--------
libperf(3), libperf-sampling(7)