| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nspi: bcm2835: Fix out-of-bounds access with more than 4 slaves\n\nCommit 571e31fa60b3 (\"spi: bcm2835: Cache CS register value for\n->prepare_message()\") limited the number of slaves to 3 at compile-time.\nThe limitation was necessitated by a statically-sized array prepare_cs[]\nin the driver private data which contains a per-slave register value.\n\nThe commit sought to enforce the limitation at run-time by setting the\ncontroller's num_chipselect to 3: Slaves with a higher chipselect are\nrejected by spi_add_device().\n\nHowever the commit neglected that num_chipselect only limits the number\nof *native* chipselects. If GPIO chipselects are specified in the\ndevice tree for more than 3 slaves, num_chipselect is silently raised by\nof_spi_get_gpio_numbers() and the result are out-of-bounds accesses to\nthe statically-sized array prepare_cs[].\n\nAs a bandaid fix which is backportable to stable, raise the number of\nallowed slaves to 24 (which \"ought to be enough for anybody\"), enforce\nthe limitation on slave ->setup and revert num_chipselect to 3 (which is\nthe number of native chipselects supported by the controller).\nAn upcoming for-next commit will allow an arbitrary number of slaves." |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/spi/spi-bcm2835.c" |
| ], |
| "versions": [ |
| { |
| "version": "571e31fa60b3697d5db26140e16d5c45c51c9815", |
| "lessThan": "b5502580cf958b094f3b69dfe4eece90eae01fbc", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "571e31fa60b3697d5db26140e16d5c45c51c9815", |
| "lessThan": "82a8ffba54d31e97582051cb56ba1f988018681e", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "571e31fa60b3697d5db26140e16d5c45c51c9815", |
| "lessThan": "01415ff85a24308059e06ca3e97fd7bf75648690", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "571e31fa60b3697d5db26140e16d5c45c51c9815", |
| "lessThan": "13817d466eb8713a1ffd254f537402f091d48444", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/spi/spi-bcm2835.c" |
| ], |
| "versions": [ |
| { |
| "version": "5.4", |
| "status": "affected" |
| }, |
| { |
| "version": "0", |
| "lessThan": "5.4", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.4.126", |
| "lessThanOrEqual": "5.4.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.10.44", |
| "lessThanOrEqual": "5.10.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.12.11", |
| "lessThanOrEqual": "5.12.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.13", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.4", |
| "versionEndExcluding": "5.4.126" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.4", |
| "versionEndExcluding": "5.10.44" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.4", |
| "versionEndExcluding": "5.12.11" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.4", |
| "versionEndExcluding": "5.13" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/b5502580cf958b094f3b69dfe4eece90eae01fbc" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/82a8ffba54d31e97582051cb56ba1f988018681e" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/01415ff85a24308059e06ca3e97fd7bf75648690" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/13817d466eb8713a1ffd254f537402f091d48444" |
| } |
| ], |
| "title": "spi: bcm2835: Fix out-of-bounds access with more than 4 slaves", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2021-47282", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
