| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nPCI: s390: Fix use-after-free of PCI resources with per-function hotplug\n\nOn s390 PCI functions may be hotplugged individually even when they\nbelong to a multi-function device. In particular on an SR-IOV device VFs\nmay be removed and later re-added.\n\nIn commit a50297cf8235 (\"s390/pci: separate zbus creation from\nscanning\") it was missed however that struct pci_bus and struct\nzpci_bus's resource list retained a reference to the PCI functions MMIO\nresources even though those resources are released and freed on\nhot-unplug. These stale resources may subsequently be claimed when the\nPCI function re-appears resulting in use-after-free.\n\nOne idea of fixing this use-after-free in s390 specific code that was\ninvestigated was to simply keep resources around from the moment a PCI\nfunction first appeared until the whole virtual PCI bus created for\na multi-function device disappears. The problem with this however is\nthat due to the requirement of artificial MMIO addreesses (address\ncookies) extra logic is then needed to keep the address cookies\ncompatible on re-plug. At the same time the MMIO resources semantically\nbelong to the PCI function so tying their lifecycle to the function\nseems more logical.\n\nInstead a simpler approach is to remove the resources of an individually\nhot-unplugged PCI function from the PCI bus's resource list while\nkeeping the resources of other PCI functions on the PCI bus untouched.\n\nThis is done by introducing pci_bus_remove_resource() to remove an\nindividual resource. Similarly the resource also needs to be removed\nfrom the struct zpci_bus's resource list. It turns out however, that\nthere is really no need to add the MMIO resources to the struct\nzpci_bus's resource list at all and instead we can simply use the\nzpci_bar_struct's resource pointer directly." |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "arch/s390/pci/pci.c", |
| "arch/s390/pci/pci_bus.c", |
| "arch/s390/pci/pci_bus.h", |
| "drivers/pci/bus.c", |
| "include/linux/pci.h" |
| ], |
| "versions": [ |
| { |
| "version": "a50297cf8235b062bcdeaa8b1dad58e69d3e1b43", |
| "lessThan": "437bb839e36cc9f35adc6d2a2bf113b7a0fc9985", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "a50297cf8235b062bcdeaa8b1dad58e69d3e1b43", |
| "lessThan": "a2410d0c3d2d714ed968a135dfcbed6aa3ff7027", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "a50297cf8235b062bcdeaa8b1dad58e69d3e1b43", |
| "lessThan": "b99ebf4b62774e690e73a551cf5fbf6f219bdd96", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "a50297cf8235b062bcdeaa8b1dad58e69d3e1b43", |
| "lessThan": "ab909509850b27fd39b8ba99e44cda39dbc3858c", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "arch/s390/pci/pci.c", |
| "arch/s390/pci/pci_bus.c", |
| "arch/s390/pci/pci_bus.h", |
| "drivers/pci/bus.c", |
| "include/linux/pci.h" |
| ], |
| "versions": [ |
| { |
| "version": "5.13", |
| "status": "affected" |
| }, |
| { |
| "version": "0", |
| "lessThan": "5.13", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.15.104", |
| "lessThanOrEqual": "5.15.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.1.21", |
| "lessThanOrEqual": "6.1.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.2.8", |
| "lessThanOrEqual": "6.2.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.3", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.13", |
| "versionEndExcluding": "5.15.104" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.13", |
| "versionEndExcluding": "6.1.21" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.13", |
| "versionEndExcluding": "6.2.8" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "5.13", |
| "versionEndExcluding": "6.3" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/437bb839e36cc9f35adc6d2a2bf113b7a0fc9985" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/a2410d0c3d2d714ed968a135dfcbed6aa3ff7027" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/b99ebf4b62774e690e73a551cf5fbf6f219bdd96" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/ab909509850b27fd39b8ba99e44cda39dbc3858c" |
| } |
| ], |
| "title": "PCI: s390: Fix use-after-free of PCI resources with per-function hotplug", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2023-53123", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
