| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf: Reject variable offset alu on PTR_TO_FLOW_KEYS\n\nFor PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off\nfor validation. However, variable offset ptr alu is not prohibited\nfor this ptr kind. So the variable offset is not checked.\n\nThe following prog is accepted:\n\n func#0 @0\n 0: R1=ctx() R10=fp0\n 0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx()\n 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys()\n 2: (b7) r8 = 1024 ; R8_w=1024\n 3: (37) r8 /= 1 ; R8_w=scalar()\n 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0,\n smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400))\n 5: (0f) r7 += r8\n mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1\n mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024\n mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1\n mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024\n 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off\n =(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024,\n var_off=(0x0; 0x400))\n 6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar()\n 7: (95) exit\n\nThis prog loads flow_keys to r7, and adds the variable offset r8\nto r7, and finally causes out-of-bounds access:\n\n BUG: unable to handle page fault for address: ffffc90014c80038\n [...]\n Call Trace:\n <TASK>\n bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline]\n __bpf_prog_run include/linux/filter.h:651 [inline]\n bpf_prog_run include/linux/filter.h:658 [inline]\n bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline]\n bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991\n bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359\n bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline]\n __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475\n __do_sys_bpf kernel/bpf/syscall.c:5561 [inline]\n __se_sys_bpf kernel/bpf/syscall.c:5559 [inline]\n __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559\n do_syscall_x64 arch/x86/entry/common.c:52 [inline]\n do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83\n entry_SYSCALL_64_after_hwframe+0x63/0x6b\n\nFix this by rejecting ptr alu with variable offset on flow_keys.\nApplying the patch rejects the program with \"R7 pointer arithmetic\non flow_keys prohibited\"." |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "kernel/bpf/verifier.c" |
| ], |
| "versions": [ |
| { |
| "version": "d58e468b1112dcd1d5193c0a89ff9f98b5a3e8b9", |
| "lessThan": "29ffa63f21bcdcef3e36b03cccf9d0cd031f6ab0", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "d58e468b1112dcd1d5193c0a89ff9f98b5a3e8b9", |
| "lessThan": "4108b86e324da42f7ed425bd71632fd844300dc8", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "d58e468b1112dcd1d5193c0a89ff9f98b5a3e8b9", |
| "lessThan": "e8d3872b617c21100c5ee4f64e513997a68c2e3d", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "d58e468b1112dcd1d5193c0a89ff9f98b5a3e8b9", |
| "lessThan": "1b500d5d6cecf98dd6ca88bc9e7ae1783c83e6d3", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "d58e468b1112dcd1d5193c0a89ff9f98b5a3e8b9", |
| "lessThan": "22c7fa171a02d310e3a3f6ed46a698ca8a0060ed", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "kernel/bpf/verifier.c" |
| ], |
| "versions": [ |
| { |
| "version": "4.20", |
| "status": "affected" |
| }, |
| { |
| "version": "0", |
| "lessThan": "4.20", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "5.15.148", |
| "lessThanOrEqual": "5.15.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.1.75", |
| "lessThanOrEqual": "6.1.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.6.14", |
| "lessThanOrEqual": "6.6.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.7.2", |
| "lessThanOrEqual": "6.7.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.8", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "4.20", |
| "versionEndExcluding": "5.15.148" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "4.20", |
| "versionEndExcluding": "6.1.75" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "4.20", |
| "versionEndExcluding": "6.6.14" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "4.20", |
| "versionEndExcluding": "6.7.2" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "4.20", |
| "versionEndExcluding": "6.8" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/29ffa63f21bcdcef3e36b03cccf9d0cd031f6ab0" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/4108b86e324da42f7ed425bd71632fd844300dc8" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/e8d3872b617c21100c5ee4f64e513997a68c2e3d" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/1b500d5d6cecf98dd6ca88bc9e7ae1783c83e6d3" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/22c7fa171a02d310e3a3f6ed46a698ca8a0060ed" |
| } |
| ], |
| "title": "bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2024-26589", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
