| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nx86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups\n\nDuring memory error injection test on kernels >= v6.4, the kernel panics\nlike below. However, this issue couldn't be reproduced on kernels <= v6.3.\n\n mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134\n mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}\n mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86\n mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490\n mce: [Hardware Error]: Run the above through 'mcelog --ascii'\n mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel\n Kernel panic - not syncing: Fatal local machine check\n\nThe MCA code can recover from an in-kernel #MC if the fixup type is\nEX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to\naccess userspace memory. However, if the fixup type is EX_TYPE_DEFAULT\nthe only thing that is raised for an in-kernel #MC is a panic.\n\nex_handler_uaccess() would warn if users gave a non-canonical addresses\n(with bit 63 clear) to {get, put}_user(), which was unexpected.\n\nTherefore, commit\n\n b19b74bc99b1 (\"x86/mm: Rework address range check in get_user() and put_user()\")\n\nreplaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()\nfixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.\n\nCommit\n\n 6014bc27561f (\"x86-64: make access_ok() independent of LAM\")\n\nadded the check gp_fault_address_ok() right before the WARN_ONCE() in\nex_handler_uaccess() to not warn about non-canonical user addresses due\nto LAM.\n\nWith that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()\nexception fixups in order to be able to handle in-kernel MCEs correctly\nagain.\n\n [ bp: Massage commit message. ]" |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "arch/x86/lib/getuser.S", |
| "arch/x86/lib/putuser.S" |
| ], |
| "versions": [ |
| { |
| "version": "b19b74bc99b1501a550f4448d04d59b946dc617a", |
| "lessThan": "2aed1b6c33afd8599d01c6532bbecb829480a674", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "b19b74bc99b1501a550f4448d04d59b946dc617a", |
| "lessThan": "2da241c5ed78d0978228a1150735539fe1a60eca", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "b19b74bc99b1501a550f4448d04d59b946dc617a", |
| "lessThan": "8eed4e00a370b37b4e5985ed983dccedd555ea9d", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "arch/x86/lib/getuser.S", |
| "arch/x86/lib/putuser.S" |
| ], |
| "versions": [ |
| { |
| "version": "6.4", |
| "status": "affected" |
| }, |
| { |
| "version": "0", |
| "lessThan": "6.4", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.6.17", |
| "lessThanOrEqual": "6.6.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.7.5", |
| "lessThanOrEqual": "6.7.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.8", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.4", |
| "versionEndExcluding": "6.6.17" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.4", |
| "versionEndExcluding": "6.7.5" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionStartIncluding": "6.4", |
| "versionEndExcluding": "6.8" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/2aed1b6c33afd8599d01c6532bbecb829480a674" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/2da241c5ed78d0978228a1150735539fe1a60eca" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/8eed4e00a370b37b4e5985ed983dccedd555ea9d" |
| } |
| ], |
| "title": "x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2024-26674", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |
