| { |
| "containers": { |
| "cna": { |
| "providerMetadata": { |
| "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038" |
| }, |
| "descriptions": [ |
| { |
| "lang": "en", |
| "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nusb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error\n\nWhen ncm function is working and then stop usb0 interface for link down,\neth_stop() is called. At this piont, accidentally if usb transport error\nshould happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled.\n\nAfter that, ncm_disable() is called to disable for ncm unbind\nbut gether_disconnect() is never called since 'in_ep' is not enabled.\n\nAs the result, ncm object is released in ncm unbind\nbut 'dev->port_usb' associated to 'ncm->port' is not NULL.\n\nAnd when ncm bind again to recover netdev, ncm object is reallocated\nbut usb0 interface is already associated to previous released ncm object.\n\nTherefore, once usb0 interface is up and eth_start_xmit() is called,\nreleased ncm object is dereferrenced and it might cause use-after-free memory.\n\n[function unlink via configfs]\n usb0: eth_stop dev->port_usb=ffffff9b179c3200\n --> error happens in usb_ep_enable().\n NCM: ncm_disable: ncm=ffffff9b179c3200\n --> no gether_disconnect() since ncm->port.in_ep->enabled is false.\n NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200\n NCM: ncm_free: ncm free ncm=ffffff9b179c3200 <-- released ncm\n\n[function link via configfs]\n NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000\n NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000\n NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0\n usb0: eth_open dev->port_usb=ffffff9b179c3200 <-- previous released ncm\n usb0: eth_start dev->port_usb=ffffff9b179c3200 <--\n eth_start_xmit()\n --> dev->wrap()\n Unable to handle kernel paging request at virtual address dead00000000014f\n\nThis patch addresses the issue by checking if 'ncm->netdev' is not NULL at\nncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'.\nIt's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect\nrather than check 'ncm->port.in_ep->enabled' since it might not be enabled\nbut the gether connection might be established." |
| } |
| ], |
| "affected": [ |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "unaffected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/usb/gadget/function/f_ncm.c" |
| ], |
| "versions": [ |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "7f67c2020cb08499c400abf0fc32c65e4d9a09ca", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "0588bbbd718a8130b98c54518f1e0b569ce60a93", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "f356fd0cbd9c9cbd0854657a80d1608d0d732db3", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "7250326cbb1f4f90391ac511a126b936cefb5bb7", |
| "status": "affected", |
| "versionType": "git" |
| }, |
| { |
| "version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", |
| "lessThan": "6334b8e4553cc69f51e383c9de545082213d785e", |
| "status": "affected", |
| "versionType": "git" |
| } |
| ] |
| }, |
| { |
| "product": "Linux", |
| "vendor": "Linux", |
| "defaultStatus": "affected", |
| "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", |
| "programFiles": [ |
| "drivers/usb/gadget/function/f_ncm.c" |
| ], |
| "versions": [ |
| { |
| "version": "5.15.157", |
| "lessThanOrEqual": "5.15.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.1.88", |
| "lessThanOrEqual": "6.1.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.6.29", |
| "lessThanOrEqual": "6.6.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.8.8", |
| "lessThanOrEqual": "6.8.*", |
| "status": "unaffected", |
| "versionType": "semver" |
| }, |
| { |
| "version": "6.9", |
| "lessThanOrEqual": "*", |
| "status": "unaffected", |
| "versionType": "original_commit_for_fix" |
| } |
| ] |
| } |
| ], |
| "cpeApplicability": [ |
| { |
| "nodes": [ |
| { |
| "operator": "OR", |
| "negate": false, |
| "cpeMatch": [ |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "5.15.157" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.1.88" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.6.29" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.8.8" |
| }, |
| { |
| "vulnerable": true, |
| "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", |
| "versionEndExcluding": "6.9" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "references": [ |
| { |
| "url": "https://git.kernel.org/stable/c/7f67c2020cb08499c400abf0fc32c65e4d9a09ca" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/0588bbbd718a8130b98c54518f1e0b569ce60a93" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/f356fd0cbd9c9cbd0854657a80d1608d0d732db3" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/7250326cbb1f4f90391ac511a126b936cefb5bb7" |
| }, |
| { |
| "url": "https://git.kernel.org/stable/c/6334b8e4553cc69f51e383c9de545082213d785e" |
| } |
| ], |
| "title": "usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error", |
| "x_generator": { |
| "engine": "bippy-1.2.0" |
| } |
| } |
| }, |
| "cveMetadata": { |
| "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038", |
| "cveID": "CVE-2024-26996", |
| "requesterUserId": "gregkh@kernel.org", |
| "serial": "1", |
| "state": "PUBLISHED" |
| }, |
| "dataType": "CVE_RECORD", |
| "dataVersion": "5.0" |
| } |